Gebruiksaanwijzing /service van het product S-7200A van de fabrikant Brother
Ga naar pagina of 29
S-7200A SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Please read this manual before using the machine. The basic operation manual describes basic operations including sewing machine operations. For cleaning, standard adjustment s and more det ails, please refer to the instruction manual contained in the Document CD.
.
S-7200A 1. SAFETY INSTRUCTIONS 1 Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual.
S-7200A 1. SAFETY INSTRUCTIONS 2 1-2. Notes on safety DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury.
S-7200A 1. SAFETY INSTRUCTIONS 3 CAUTION Sewing This sewing machine should only be used by operators who have received the necessary training in safe use beforehand. The sewing machine should not be used for any applications other than sewing. Be sure to wear protective goggles when using the machine.
S-7200A 1. SAFETY INSTRUCTIONS 4 1-3. Warning labels The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer.
S-7200A 2. CONVENIENT FUNCTION FOR SMOOTH SEWING 5 2. CONVENIENT FUNCTION FOR SMOOTH SEWING Notification given when greasing is required INSTRUCTION MANUAL CD 11-2. Applying grease Lower thread counter Selectable starting speed INSTRUCTION MANUAL CD 5-6.
S-7200A 3. NAMES OF MAJOR PARTS 6 3. NAMES OF MAJOR P ARTS (1) Bobbin winder (2) Thread wiper (-4[][] specifications) (3) Lifting lever (4) Quick reverse (Actuator) (5) Presser foot (6) Control box (7.
S-7200A 4. INSTALLATION 7 4. INST ALLA TION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs more than 44 kg.
S-7200A 4. INSTALLATION 8 4-1. Table processing diagram The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the vibration of the sewing machine. Drill holes as indicated in the illustration below.
S-7200A 4. INSTALLATION 9 3 . Power switch (1) Power switch (2) Screws [2 pcs] 4 . Oil pan (1) Head cushions (left) [2 pcs] (2) Head cushions (right) [2 pcs] (3) Oil pan 5 .
S-7200A 4. INSTALLATION 10 7 . Machine head (1) Hinges [2 pcs] (2) Machine head (3) Head rest NOTE: Tap the head rest (3) securely into the table hole. If the head rest (3) is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back.
S-7200A 4. INSTALLATION 11 1 1 . Knee lifter plate (1) Knee lifter plate (2) Bolt * Loosen the bolt (3) and move the knee lifter plate (1) to a position where it is easy to use. <Knee lifter adjustment> 1. Turn the machine pulley so that the feed dog is below the top of the needle plate.
S-7200A 4. INSTALLATION 12 4-3. Lubrication (-[]0[], []3[] specifications) * If the sewing machine is –[]5[] specifications, it is a complete dry type machine, and so no lubrication is necessary.
S-7200A 4. INSTALLATION 13 4-4. Connecting the cords DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury.
S-7200A 4. INSTALLATION 14 (1) 7-pin head detector unit connector (2) 10-pin operating panel connector (3) 14-pin encoder connector (4) 14-pin machine connector Refer to the following page for the 4-pin motor connector.
S-7200A 4. INSTALLATION 15 3 . Other cords (1) 6-pin power supply connector (2) 4-pin motor connector (3) Wire clip (4) Power cord <For single-phase specifications> Insert the power cord plug (5) into a wall outlet. <For three-phase specifications> 1.
S-7200A 4. INSTALLATION 16 4-5. Test operation (Operating the treadle) CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. <Turning on the power> Press the ON power switch (1).
S-7200A 5. PREPARATION BEFORE SEWING 17 5. PREP ARA TION BEFORE SEWING 5-1. Installing the needle CAUTION Turn off the power switch before installing the needle. The machine may operate if the treadle is depressed by mistake, which could result in injury.
S-7200A 5. PREPARATION BEFORE SEWING 18 2126M 5-3. Winding the lower thread CAUTION Do not touch any of the moving parts or press any objects against the machine while winding the lower thread, as this may result in personal injury or damage to the machine.
S-7200A 5. PREPARATION BEFORE SEWING 19 2128M 5-5. Threading the upper thread CAUTION Turn off the power switch before threading the upper thread. The machine may operate if the treadle is depressed by mistake, which could result in injury. Turn the machine pulley and raise the thread take-up (1) before threading the upper thread.
S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 20 6. USING THE OPERA TION P ANEL (BASIC OPERA TIONS) 6-1. Names and functions • The operation panel keys cannot be operated while sewing is in progress. Select the keys and set the number of stitches before starting sewing.
S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 21 (6) Fixed stitch key When this key is pressed so that the indicator illuminates, the number of stitches (1 − 1999) in the E stitch number display is sewn, and then the sewing machine stops automatically.
S-7200A 6. USING THE OPERATION PANEL (BASIC OPERATIONS) 22 6-2. Sewing start and end backtack stitches 1 Setting start backtack stitches 2 Setting end backtack stitches 3 Start backtacking is carried out. After it has finished, normal sewing continues for as long as the treadle remains depressed.
S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 23 7. USING THE CONTROL BOX P ANEL (BASIC OPERA TIONS) NOTE The control box panel will not operate when the machine head operation panel is connected. 7-1. Names and functions The power indicator illuminates when the power switch is turned on.
S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 24 7-2. Sewing start and end backtack stitches <Stitch number setting method> 1 While pressing the start backtack key (1), press the power switch (2) to turn on the power. 2 Start backtack setting (A) 1.
S-7200A 7. USING THE CONTROL BOX PANEL (BASIC OPERATIONS) 25 <Start and end backtack sewing method> 1 Press the power switch (1) to turn on the power. 2 1. Press the start backtack key (2) so that the start backtack indicator (3) illuminates. 2.
S-7200A 8. SEWING 26 8. SEWING CAUTION Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury.
For cleaning, standard adjustments and more details, please refer to the instruction manual contained in the Document CD. Contents of the Document CD The following documents are contained in PDF format.
Een belangrijk punt na aankoop van elk apparaat Brother S-7200A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Brother S-7200A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Brother S-7200A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Brother S-7200A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Brother S-7200A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Brother S-7200A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Brother S-7200A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Brother S-7200A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
