Gebruiksaanwijzing /service van het product BCP 8000 van de fabrikant BTC
Ga naar pagina of 34
BCP 8000 series Portable CD-ReWritable Drive User’s Manual.
.
CLASS 1 LA SER PRODUCT APPA REIL A LA SER DE CLASSE 1 LASER KLA SSE 1 LUOKAN 1 LA SERLAITE PRODUIT LASER CATEGORIE 1 DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM VORSICHT INSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RADIATION DU FAISCEAU LASER INVISIBLE EN CAS D’OUVERTURE.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
Warranty and Limited Liability This product is sold with a limited warranty and specific remedies are available to the original purchaser in the even t that the product fails to conform to the limited warranty. Manufacturer’s liability may be further limited in accordance to the sales contract.
Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock and dam age to the eyes due to the laser beam , servicing must be carried out by a trained technician. Safety Precaution 1. The unit should only be operat ed with the supplied power adapter.
Table of Contents INTRODUCTION 1 S YSTEM R EQUIREMENTS 1 P ACKAGE C ONTENTS 2 CD-RW DRIVE CONTROLS 3 INSTALLATION 7 H OST I NTERFACE C ONNECTIONS 7 For USB Interface 7 For FireWire (IEEE 1394) Interfa.
.
Portable CD-RW Drive 1 INTRODUCTION Congratulations on the purchase of y our portable USB2.0 (or USB2.0 / FireWire IEEE1394) CD-ReWritable Drive. This drive supports maximum 40x speed write ability on CD-R discs, 12x speed rewrite on CD-RW discs and 48x speed reading performance.
Portable CD-RW Drive 2 ♦ USB2.0 Hi-Speed PCI card installed on your computer ♦ FireWire IEEE 1394 PCI card installed on your computer or built- in IEEE 1394 controller on your computer.
Portable CD-RW Drive CD-RW DRIVE CONTROLS A D E F G H I N B C A. CD Cover The CD Cover is used in conjunction with the Stop/Open Button (H) to insert or remove discs. When the CD disc is loaded into the CD-RW drive, push the cover firm ly down to close the cover.
Portable CD-RW Drive E. Next Track Button Press this button to skip to next track while playing an audio CD when in stand-alone mode. F. Pow er / Locking LED (dual color) When power is turned on, this LED will be lighted blue to indicate drive is receiving power.
Portable CD-RW Drive I. Activity Status LED (dual color) This LED indicates Read / Write status according to the operation of the drive. Flashes “ yellow ” light while verifying or reading a disc. Flashes “ red ” while writing a CD-R/CD-RW disc.
Portable CD-RW Drive 6 N. Emergency Eject Hole When the Stop/Open button can’t work properly and the CD Cover can’t be opened, you can insert a paper clip or a small rod into this hole for manual ejection. Please make sure to power off the drive and the system before you do that.
Portable CD-RW Drive INSTALLATION Host Interface Connections For USB Interface If your computer do not have built-in controller support for USB2.0, you will need to install a USB2.0 Host adapter card on your computer to operate the CD-RW drive at USB2.
Portable CD-RW Drive For FireWire (IEEE 1394) Interface If your computer do not have built -in FireWire IEEE 1394 controller support, you will need to install a FireWire IEEE 1394 Host adapter card on your computer to oper ate the CD-RW drive at IEEE 1394 speeds.
Portable CD-RW Drive Hardware Installation Note: This drive needs to receive power in order for the CD Cover to be opened. Do not attempt to force open the CD Cover when there is no power to the drive. The Cover will be locked and cannot be opened at this stage.
Portable CD-RW Drive 10 ♦ Turn on the power. ♦ When the drive is receiving power, the power / locking LED will be lighted blue (if there is no CD loaded); otherwise it will be lighted red (with CD loaded) after the drive completes the power up initialisation.
Portable CD-RW Drive Data Cable Connection 1. USB connection a. For –U model b. For –C model ♦ Turn on power to your computer. ♦ Connect the USB cable to the USB2.0 port on the CD-RW drive. ♦ Connect the other end of the cable to the USB2.0 port on your USB2.
Portable CD-RW Drive 2. FireWire (IEEE 1394) connection a. for mini FireWire (IEEE 1394) ♦ Turn on power to your computer. ♦ Connect the 4-pin mini FireWire cable to the mini FireWire port on the CD-RW drive. ♦ Connect the other end of the cable (6-pin) to the FireWire port to your computer.
Portable CD-RW Drive ♦ Connect the other end of the cable (4-pin) to the mini FireWire port to your computer. Note: 1) Connect only one type of interface, either USB or FireWire. Do not use both connections at the same time. 2) Connect only one FireWire port to the CD-RW drive only.
Portable CD-RW Drive To Insert a CD into the CD-RW Drive Power/Locking LED A ctivity LED CD Cover Stop / Open Button ♦ Press the Stop/Open button once. The drive will first lock the CD Cover and the locking LED turns to red . ♦ The drive will then unlock autom atically and locking LED changes to blue .
Portable CD-RW Drive To Remove a CD from the CD-RW Driv e ♦ Press the Stop/Open button once to stop the disc from spinning and to unlock the drive. To stop and unlocks an audio CD in playing mode, press the Stop/Open button twice. ♦ You will hear a click sound when the CD Cover has been unlocked.
Portable CD-RW Drive To Use the CD-RW Drive as a Audio CD Play er You may listen to audio CDs when the CDRW drive is not connected to a computer (in stand-alone mode), ♦ Turn off power to your comput er and to the CD-RW drive. ♦ Connect the headphone to the headphone jack at the side of the drive.
Portable CD-RW Drive 17 You may also listen to audio CDs through your computer speakers if you have installed audio sound card on your computer or if your main-board is integrated with built-in sound system. ♦ Turn off power to your comput er and to the CD-RW drive.
Portable CD-RW Drive 18 Driver Installation For USB Interface: Windows ME / XP / 2000 Environment This CD-RW drive is a PnP device and Windows ME/XP/2000 can automatically detect the drive and load the appropriate driver. If Windows cannot detect the driv e, you can operate manually: 1.
Portable CD-RW Drive 19 For IEEE1394 Interface: Windows ME / XP / 2000 / 98 / 98SE Environment 1) Windows can automatically detect the drive and load the appropriate driver under MS default driver. Software Installation The bundled mastering software gives you the complete solution for making audio/data CDs right from your desktop.
Portable CD-RW Drive 20 TECHNICAL DATA Performance Transfer rate Read: 7200kb/s (48X max) 4800kb/s (32X max, CDRW) Write: CD-R 6000kb/s (40X max) CD-RW 1800kb/s (12X max) Access time (one-third stroke.
Portable CD-RW Drive 21 Dimensions Height 40.4 mm Width 136.0 mm Depth 160.7 mm Weight (approx). 600 g (excluding power adapter and cables).
Portable CD-RW Drive 22 TROUBLESHOOTING To help you get more familiar with your CDRW Drive, the following FAQ lists some common problems you might encounter. Please read it for reference before you request RM A support from your dealer. Q1. External CDRW DRIVE cannot be recognized.
Portable CD-RW Drive 23 Q6. The CD Cover cannot be opened. There are three possible reasons: (1) The CD Cover is locked automatically. The internal mechanism will lock the CD-RW drive automatically when it first detects that the CD Cover is closed. The drive will automatically unlock again when it detects ther e is no CD inside the drive.
Portable CD-RW Drive 24 Q9. “Buffer underrun” alw ays occurs while w riting discs. Here are some suggestions: (1) Close the screen saver & TSR (Terminate and Stay Resident). (2) Quit other redundant application when burning. (3) Select good quality and high-speed supported blank discs.
.
3100551051 Version 1.0 Nov. 2002.
Een belangrijk punt na aankoop van elk apparaat BTC BCP 8000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen BTC BCP 8000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens BTC BCP 8000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding BTC BCP 8000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over BTC BCP 8000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van BTC BCP 8000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de BTC BCP 8000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met BTC BCP 8000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
