Gebruiksaanwijzing /service van het product TS1400D TeraStation 1400 van de fabrikant Buffalo
Ga naar pagina of 104
T eraSta tion 1000 U ser Manual Americas: www .buf faloamericas.com Europe: www .buf falo-technology .com 35020519-04 2015.01.
1 C on tents Chapter 1 Getting Star ted ............................................. 6 Diagrams ........................................................................................... 6 T urning the T eraS tation On and Off.......................
2 RMM (RAID Mode M anager) .................................................................... 30 RAID Sc anning.......................................................................................... 32 Adding an External Hard Driv e .............
3 Chapter 7 Multimedia ................................................. 60 DLNA .............................................................................................. 60 C onfiguration .........................................................
4 Initializing with F unction Button ........................................................... 80 Initializing from Settings ........................................................................ 81 Log s ..........................................
5 F or C ustomers in E urope ............................................................ 101.
6 Chapter 1 Getting Star ted Diagrams TS1200D 13 5 8 3 1 2 DISK 1 DISK 2 DISK 1 DISK 2 ERROR DISK 1 DISK 2 ERROR 4 14 10 9 11 15 12 TS1400D 4 1 5 2 3 7 7 8 13 14 6 10 9 11 12.
7 TS1400R 9 10 13 16 78 14 11 13 44 16 17 19 10 14 53 24 67 18 1 Po wer LED The power LED will ligh t up white while the T eraStation is on. The power LED blinks whit e during boot or shutdown. F or TS1200D and TS1400D models, if an error occurs, the po wer LED will blink red .
8 Use the included power cable t o connect to a surge protector or outlet. Note: Disconnecting the AC cable from the T eraStation, even if it is not pow ered on, may cause the T eraStation's time to become incorrect. 12 Po wer Status LED The LED glows g reen when the power cable is c onnected.
9 2 Right-click on your T eraStation's icon and select Settings . On the Mac, select the T eraStation's icon while holding down the contr ol key , then select Settings . 3 Click Easy Admin . 4 Click Change Passw ord . 5 If this screen is displayed , enter the current passw ord and click OK .
10 6 Enter the new passwor d (twice) and click Next . 7 Click OK . Y ou have changed the admin passwor d..
11 Chapter 2 C onfigura tion Configure and manage y our T eraStation using the Settings inter face, accessible fr om a browser windo w . Open the interface using the procedure below or type the T eraSta tion's IP address in the URL field of your br owser .
12 Notes: • If the time - out period is set to "10 minutes" , you will be logged out of Settings after 10 minutes of inactivit y . • Click Secure Connection to log in with an encrypted connection.
13 2 Right-click on your T eraStation's icon and choose Settings . F or Mac OS, click the T eraStation icon while holding down the contr ol key , then select Settings . 3 Click Easy Admin . 4 The Easy Admin scr een will open. Notes: • If you click any buttons , y ou will need to enter a username and passwor d.
14 Chapter 3 S haring F iles A dding Shared F olders 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click Create F older . 4 Y ou can create up to 20 shared f olders at a time. Enter a f older name and description (optional), then click Create F older .
15 If you want to configur e any shared f olders, click Edit and configur e desired settings. Click OK when finished . 5 Click OK when the following message is displa yed. Notes: • Names may contain up to 27 alphanumeric characters , hyphens (-), and underscor es (_).
16 Note: Y ou can prevent guests and other users from emptying the trash by na vigating to F ile Sharing - SMB - Recycle Bin Permissions and selecting " Administrator only" . Read-only Shares By default, new shares are set with r ead & write access, but y ou may change the attribute to Read Only in Attribute .
17 If you want to configur e any users, click E dit and configure desired settings . Click OK when finished. 5 Click OK when the following message is displa yed. Notes: • Usernames may contain up t o 128 characters, including hyphens (-), underscor es (_), periods (.
18 username1,password1,commen t1 username2,password2,commen t2 username3,password3,commen t3 Guidelines: • Use commas (,) as separators. Do not put spaces bef ore or after commas. • I f a line has an incorrect format, the user on that line will not be r egistered .
19 5 Enter a username, passw ord (twice), number of users to creat e, and select the digit to add after each username from the drop do wn menu. 6 Click OK . The number of users y ou specified are created . Notes: • The username for sequential users ma y contain up to 24 alphanumeric characters, h yphens (-), and underscores (_).
20 4 Configure the desir ed group settings and click OK when finished . Notes: • Group names may con tain up to 20 alphanumeric characters, hyphens (-), undersc ores (_), and periods (.). Do not use a symbol other than an underscore (_) as the first character .
21 Local Users/Gr oups 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder tha t you want to set acc ess restrictions for . 4 Click the Acc ess Restrictions tab. 5 Enable " Access Restrictions" .
22 7 Click OK . Notes: • The example above shows ac cess restriction by user . T o restrict access by group , click the L ocal Gr oups tab and select group permissions. • I f both read-only and read & write permissions are giv en to a user , the user will have read-only access.
23 - An incomplete file may be c opied and the file can no longer be deleted. If this happens, restart the T eraStation, delete the file, and perform the copy operation again. • After a drive is formatted, the "% Used" and " Amount Used" in Settings will not be 0.
24 8 Click a shared folder tha t you want to set acc ess restrictions for . 9 Click the Acc ess Restrictions tab. 10 Enable " Access Restrictions" . 11 Select the level of access for the user or gr oup: : Read and write access allow ed : Read access allowed : Access pr ohibited 12 Click OK .
25 NT Domain In an NT domain environment, the T eraStation uses account inf ormation from the NT domain server to set access restrictions for files and folders on the T eraStation. There's no need t o per form individual account management f or the T eraStation.
26 9 Click a shared folder f or which you want t o set access restrictions. 10 Click the Access Restrictions tab . 11 Enable " Access Restrictions" . 12 Select the level of access for "Domain Users" or "Domain Groups" y ou added.
27 Chapter 4 Managing St or age RAID Arra y s T eraStations support many types of RAID. The RAID array type to use depends on how many drives ar e installed in your T eraStation. T eraStation Default RAID Mode TS1400D TS1400R RAID 5 TS1200D RAID 1 Notes: • If you change the RAID mode, all data on the array is delet ed.
28 RAID 1 Combines 2 drives int o a mirrored array . The available space in the arra y is the capacity of a single drive. Identical data is written to each drive . If a drive is damaged, data can be reco vered b y replacing the damaged drive. A s long as one drive in the array remains undamaged , all data in the array can be r ecover ed.
29 Changing RAID Mode T o change the RAID mode, first put the drives in JBOD . 1 In Settings, click Drives . 2 Click to the right of "RAID" . 3 Click the array to delete . Note: If the "RAID Mode" field is blank , the array is already in JBOD .
30 RMM (RAID Mode M anager) With RMM, y ou can create or expand a RAID array without er asing the data on the drives. Befor e using RMM, make sure all inserted internal drives are the same size in to the slots. Changing from JBOD to RAID 1 Hard drives that ar en't in a RAID ar ray show "Normal" .
31 9 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . Adding a Driv e to an Existing RAID Arra y (F or TS1400D and TS1400R Models) Y ou can add a dr ive to a RAID 1 or RAID 5 array . Drives that can be added to the RAID array show "Normal" .
32 RAID S canning A RAID scan checks your RAID array for bad sectors and automa tically repairs them if any ar e found. RAID 1, RAID 10, RAID 5, and RAID 6 arrays are supported. F or best results , run RAID scans regularly . 1 In Settings, click Drives .
33 to connect only one bus-power ed drive at a time. If there is insufficient bus po wer for y our USB drive, connect its AC adapter . Note that only the first par tition of a connected USB hard drive is mounted . Additional partitions are not recogniz ed.
34 5 When the follo wing message is displayed, it is saf e to unplug the drive . Note: T o remount the drive, unplug it and then plug it back in. Checking Drives A disk check tests the data on a drive in the T eraStation or connected via USB for integrity .
35 F orma tting Drives Note: Under some circumstances , data deleted when a drive is f ormatted can be reco vered. T o ensure that data is "gone for ever" , a format might not be sufficient. See the "Erase Data on the T eraStation Completely" section below .
36 Encr ypting Drives Internal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays ar e then readable only from that specific T eraStation. T o unencr ypt a drive or array , uncheck "Encryption" and format it again.
37 Notes: • When using quotas, disable the r ecycle bin or empty the trash folder often. The limited space includes the space used for trash. • Quotas apply per drive or per array . I f a quota is set to 1 GB, each array or driv e can use a maximum of 1 GB.
38 5 Click Close . 6 Click to the right of "Users" . 7 Select the user who will inherit the group quota settings. 8 Change the user's primar y group to the g roup with the quota, then click OK . 9 Click OK . Hard Driv e Replacemen t If a drive fails, NAS Navigator2 and Settings will sho w an error message.
39 Step 1 - Replacing a Har d Drive Instructions for TS1200D and TS1400D Models 1 Squeeze the left side of the front panel and pull the panel off . DISK 1 DISK 2 DIS K 2 DIS K 1 ERR OR DIS K 2 DIS K 1 TS1200D TS1400D 2 Pull the failed drive out fr om the T eraStation.
40 3 Remove the drive fr om the car tridge. 4 Install a new drive (sold separately) into the cartridge. 5 Replace the four screw s..
41 6 Inser t the new drive into the empty slot. DISK 1 DISK 2 DIS K 2 DIS K 1 ERR OR DIS K 2 DIS K 1 12 DISK 1 DISK 2 TS1200D TS1400D 7 Close the front panel. DISK 1 DISK 2 DIS K 2 DIS K 1 ERR OR DIS K 2 DIS K 1 1 2 TS1200D TS1400D 8 Replacing a defective hard drive is finished .
42 Note: If your T eraStation is on and the red status LEDs are lit , the hard drives are still on. Do not unplug or remov e them. 2 Pull out the failed drive and r emove it fr om the T eraStation. 3 Inser t the new drive into the empty slot. Slide the drive in with the locking mechanism open.
43 3 When the replacement har d drive is recog nized, an I31 message will be display ed in NAS Navigator2. 4 Hold down the function button on the front of the T eraStation for 3 seconds. TS1200D TS1400D TS1400R 5 The T eraStation will start rebuilding the RAID array .
44 3 Hold down the function button on the front of the T eraStation for 3 seconds. TS1200D TS1400D TS1400R 4 The drive will be f ormatted as an individual drive. Cr eate a shared f older on the drive befor e use. Using RAID 0 Drives in a RAID 0 array do not automatically turn off in the ev ent of a malfunction.
45 Chapter 5 Remot e A c cess W ebAcc ess W ebAccess is a software pr ogram for ac cessing the files in the shared folder of y our T eraStation from your comput er or mobile devices through the Internet.
46 4 Configure the desir ed settings, then click OK . • Y ou may use the default BuffaloNAS.com registration, or disable to use a diff erent DNS server . • Choose a "BuffaloNAS.com name" and "BuffaloNAS.com key" for y our W ebAc cess account.
47 F older Setup W ebAccess P ublic Mode Allow Anonymous Allow All Groups and Users Use Inherited F older Permissions F older Attribute Read & Wri te Read Only Read & Wri te Read Only Read &am.
48 F or RAID 0, RAID 5, or RAID 1: /mnt/array1/share /mnt/usbdisk1 /mnt/usbdisk2 /mnt/usbdisk3 F or RAID 1 (two arrays): /mnt/array1/share /mnt/array2/share2 /mnt/usbdisk1 /mnt/usbdisk2 /mnt/usbdisk3 .
49 Chapter 6 Backup Back Up from the T eraSta tion Y ou can back up T eraStation folders to: • A different folder on the T eraStation • Another LinkStation on the network • Another T eraStation on the network Y ou can also configure backup jobs from Easy Admin.
50 3 Click List of LinkStations and T eraStations . 4 Click Add under "O ff-subnet Devices" , enter the IP address of the target LinkStation or T eraStation, and click Close . If your setup meets the requirements belo w , you don't have to c onfigure these settings: • The source and target T eraStations are on the same network.
51 2 Click to the right of "Backup" . 3 Click Create New Job . Note: Up to 8 backup jobs can be configured . 4 Select backup settings such as date and time to run. The follo wing types of backup jobs may be selected: T ype F iles included Normal backup All files in the source will be backed up t o the destination.
52 T ype F iles included Management backup Each time a backup is executed , management information is stor ed, and only files that have changed ar e copied or deleted.
53 Replication Replication copies all data from a shar e to a share on a diff erent T eraSta tion. This is an easy way t o configure a reliable system t o provide data pr otection in the event your main T eraStation fails. T o configure replication, connect an Ethernet cable to the LAN port of each T eraStation and follo w the steps below .
54 6 Select the shared folder that will be the replication sour ce, then click OK . 7 Click Browse under "Replication T arget" . 8 Select the shared folder that will be the replication tar get, then click OK . 9 Click OK . 10 Click Ye s . Notes: • During setup, y ou may choose to encrypt and/or compress replication data.
55 • If a network problem causes a replication error , the "Remaining Job(s)" tab may show "0" even though replication did not finish. Click Resync to r ecover fr om the replication error . All files from the sourc e folder will be copied to the target f older .
56 12 Click Browse . 13 Select the shared folder that you set in the previous st ep, then click OK . 14 Click OK . 15 Click OK . 16 Move the T ime Machine switch to the position to enable Time Machine.
57 18 Click Time Machine . 19 Click Select Backup D isk . 20 Select the T eraStation, then click Use Disk ..
58 21 Enter a username and password with the rights t o access the shared f older of the T eraStation, then click Connect . Note: If access restrictions are not configur ed on the target share, log in with the administr ator account . The default username and password f or the administrator accoun t are "admin" and "passwor d" .
59 1 In Settings, click Backup . 2 Move the Direct Cop y switch to the position to enable Direct Copy . 3 Connect the USB device. When it mounts (about 10 seconds), the function LED will light up. Note: Devices that don't trigger the function LED to light up are not suppor ted.
60 Chapter 7 Multimedia DLNA DLNA is a set of guidelines for sharing digital media. The T eraStation includes a DLNA server compliant with the DLNA guidelines. The movies, photos, and music sa ved on this product can be played back on DLNA-compliant T V s, stereo equipment, game c onsoles, and other devices within the network.
61 10 Click Edit . 11 Select an inter val for DLNA server database updates and click OK . 12 Click OK . Playing F iles T o play back conten t from a DLNA-compatible device: 1 Connect the DLNA-compatible device to the same network as the T eraStation and turn it on.
62 3 Click DLNA Client Acc ess Permissions . 4 A list of the MAC addr esses, IP addresses , and device names of the DLNA-compatible devices connected to the same network as the T eraStation is displayed. If your device is not list ed, click Refresh Database .
63 1 In Settings, click Ser vices . 2 Click to the right of "DLNA Ser ver" . 3 Click DLNA Client Acc ess Permissions . 4 Uncheck the devices you do not want t o allow to play media and click OK . 5 Click Restar t to apply changes. Suppor ted File T yp es The T eraStation supports DLNA streaming of files with the extensions below .
64 2 Click to the right of "iT unes S er ver" . 3 Click Edit . 4 Click Browse . 5 Select the shared folder that you wan t to make available to iT unes, then click OK . 6 Click OK , then OK again. 7 Move the iT unes ser ver switch to the position.
65 Notes: • Use compatibility mode to use the download manager with Windows 8.1 and W indows 8. • The download manager doesn't work with Internet Explorer 11. T o open the download manager , use a differen t browser or an earlier version of Internet Explor er .
66 7 Move the BitT orrent switch to the position to enable BitT orrent. 8 Click to the right of "BitT or rent" . 9 Click Open Download Manager . The default username is "admin" and the default passwor d is blank (no password). 10 The download manager will open.
67 Chapter 8 A dvanced F eatures Email Notification Y our T eraStation can send you email reports daily , or when settings are changed or an error oc curs.
68 5 Enter your mail server settings and choose what events will trigger notification. Click OK t o send a test email. Sleep Mode T o save energy , you can specify times to put the T eraStation into sleep (standby) mode , where the hard drive and LEDs are turned off .
69 4 Specify the timer interval, wake-up time, and time to go into sleep mode, then click OK . Notes: • Up to three timers can be set. • The time to enter sleep mode can be set fr om 0:00 am to 3:45 of the next day . The time to wake fr om sleep mode can be set from 0:00 to 23:45.
70 On days other than Wednesday , normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On W ednesday , nor mal operation begins at 7:30 and the unit goes int o sleep mode at 22:00. • T o wake the T eraStation from sleep mode manually , press the po wer button.
71 C onnec ting a Prin ter Y ou can connec t a printer to the USB port on the T eraStation. Notes: • Only one USB printer can be connected to the T eraSta tion. • Bidirectional communication is not supported i.e., remaining ink quantities and other printer sta tus information is not display ed.
72 Offline Files The "offline files" f eature that is included with man y versions of Windo ws can be used with files on the T eraStation. Y ou will be able to work on files stored on the T eraStation even when your PC is disconnected fr om the network.
73 A cc essing from an NFS Clien t Note: (US purchasers only) Buffalo 's customer support will help configure the NFS settings on your T eraStation, and will support VMware and Windows clients but will not pro vide suppor t for configuring y our Linux or other UNIX clients.
74 Note: T o delete a client, check the hostname and click Delete Client . 11 Enter the IP address and hostname of the NFS client, then click OK . 12 Click Close . 13 Enter the mount command to ac cess the shared folder fr om the NFS client. The mount command depends on y our operating system.
75 • T o restrict access to a NFS share f or specific clients, naviga te to F ile Sharing - NFS - NFS Rules and click Add Rule . Choose the folder to r estrict access to, and en ter the clients that will hav e restricted access in the "Hosts" field.
76 Notes: • Place the SSL key files (server .key, server .cr t) directly below the C root drive. The SSL key may not be able to be updated if it is placed in f olders or paths that contain multi-byt e characters. • Use the provided passw ord for the SSL key .
77 6 Choose a shared folder f or the web server , then click OK . 7 Choose an external por t, then click OK . MySQL Ser ver The T eraStation can be used as a MySQL ser ver . A MySQL database may be installed and linked with the web ser ver . 1 In Settings, click Ser vices 2 Move the MySQL server switch to the position to enable the MySQL ser ver .
78 6 Choose a shared folder f or the MySQL ser ver , then click OK . 7 Choose an external por t, then click OK . Saving and Applying Settings The T eraStation's settings can be saved t o a USB memor y device and restor ed to another T eraStation.
79 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStation. 5 Select "Save current configuration t o a USB drive" . Click Execute . 6 The "Confirm Opera tion" screen will open.
80 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStation. 5 Select " T ransfer settings fr om a USB drive" , then click Execute . 6 The "Confirm Opera tion" screen will open.
81 3 Pr ess the function button again while the LED is flashing. 4 Initialization will take 5 to 10 minutes. Do not pow er down the T eraStation while it is initializing and showing an I23 information message in NAS Naviga tor2 and with the power LED .
82 4 Select a log to view . The file operation log stor es file operations performed on the internal hard drives. F ile operations on USB drives are not logged . Note: All logs are enc oded in UTF-8 format. T o show them c orrectly , change the soft ware encoding t o "UTF-8" .
83 Name , Date , T ime , and Language Configure the T eraStation's hostname, dat e, time, and language as shown belo w . 1 In Settings, click Management . 2 Click to the right of "Name/Time/Language" . 3 Click Edit . 4 Click the Name tab, then c onfigure the T eraStation's name and description.
84 Notes: • The internal clocks of the T eraStation and other devices on your network may run at slightly diff erent speeds. Over a long period of time your network devices may show somewhat diff erent times , which can cause network problems. If clocks on your network vary by more than 5 minutes it ma y cause unexpected behavior .
85 4 Select the desired Ethernet frame size and click OK . Note: Make sure the T eraSta tion's Ethernet frame size is smaller than the hub or rout er's.
86 2 Click to the right of "IP Addr ess" . 3 Click the LAN port where the IP address will be changed. 4 Disable "DHCP" and enter the desired network addr ess settings, then click OK . Note: The f ollowing IP addresses are r eser ved and should not be used.
87 Chapter 9 Utilities NAS Naviga tor2 f or W indow s NAS Navigator2 is a utility that makes it easy to displa y Settings, change the T eraStation's IP address, or check its hard drive . If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically .
88 Name Description Menu Map Share * Assigns the T eraStation's shared folder as a network drive . Disconnect Share * Unmaps the network drive. Map All Remote Shares to Drive L etters Assigns all the T eraStation's shared folders as network drives.
89 Browse Shar es Shows a list of shared f olders on the selected NAS device. Exit Exits NAS Navigator2. *"I'm here" is available on TS1400D and TS1400R models. When clicked, the T eraStation will beep and its power LED will blink red. The follo wing tasks may be per formed from the T eraStation's properties page.
90 3 An icon for the mapped shar e will appear in Computer or My Comput er . Y ou can use this network drive just like any other hard driv e. Changing the IP A ddress 1 Double -click the icon to start NAS Navigator2. 2 Right-click on your T eraStation's icon and choose P roperties - IP Address .
91 If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically . Click the icon in the Dock to start NAS Navigator2.
92 Mount as Netw ork Drive Y ou can map the shared folder as a network drive using NAS Navigator2 on Mac OS. 1 Click the ic on in the Dock to star t NAS Navigator2. 2 Double -click the T eraStation icon or click the T eraSta tion icon while holding down the contr ol key , then select Open Folder .
93 3 Uncheck "Use DHCP" , enter the desired settings, and ent er the administrator passwor d, then click Apply . Note: The f ollowing IP addresses are r eser ved and should not be used. If you c onfigure one of them by accident , initialize IP address settings with the function button on the T eraSta tion.
94 NovaBA CKUP is now installed. T o launch Nov aBACKUP , click the ic on on your computer's desktop . F or more detailed information, click View Help in the No vaBACKUP Express Wizard or click Help T opics at the upper right of the NovaBA CKUP home screen.
95 Chapter 10 A ppendix When the LED Blinks Red P ow er or Error LED If there is an error , the power LED on TS1200D and TS1400D models, or the error LED on TS1400R models will blink. For TS1200D models, the following blink patt erns will give the error code .
96 Drive Sta tus LED If an error occurs on a drive, its c orresponding LED will light up or blink. Refer to the "Hard Drive Replacemen t" section in chapter 4 and replace the failed drive with a new drive .
97 Information Code Description Corrective A ction I31 Displayed when a new drive is det ected after replacing hard drive x. Pr ess the function button to rebuild the RAID array . I32 Displayed after replacing har d drive x when the RAID needs to be rebuilt in Settings or formatting is necessary .
98 DHCP Client Normally , the T eraStation will get its IP address automatically fr om a DHCP server on the network . If no DHCP ser ver is available, then an IP addr ess will be assigned as follo ws: IP address: 169.254.xxx.xxx (xxx is assigned randomly when booting the T eraStation.
99 P ower Consumption (Max.) TS1200D: 48 W TS1400D: 150 W TS1400R: 100 W Operating Envir onment T emperature: 5–35°C; 41–95°F Environmen t humidity : 20–80% (no condensation) Compatibility Window s PCs, Macs, and mobile devices * with wired or wireless Ethernet connections.
100 Chapter 11 Regula tor y C omplianc e Informa tion F or C ustomers in the United Stat es FC C Stat ement F or TS1200D models: This equipment has been tested and f ound to comply with the limits f or a Class B digital device, pursuant t o Part 15 of the FCC Rules .
101 F or C ustomers in Europe EU Declaration of C onformity Dansk Dette er et Klasse A-produkt. I et hjemmemiljø kan dette produkt skabe radiointer ferens , hv ormed det k an være nødvendigt for bruger en at tage passende forholdsregler .
102 Utilizzare esclusivamente i ca vi e gli accessori inclusi nell’ imballaggio . Non utilizzare altri accessori o cavi a meno che non sia specificamente indicato nella documentazione .
103 CB Norsk Utstyr som er koplet til besk yttelsesjord via nettplugg og/eller via annet jor dtilkoplet utstyr – og er tilkoplet et kabel- T V nett, k an forårsake brannfar e. F or å unngå dette skal det ved tilkopling av utstyret til kabel- T V nettet installeres en galvanisk isolator mellom utstyret og kabel- TV nettet.
Een belangrijk punt na aankoop van elk apparaat Buffalo TS1400D TeraStation 1400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Buffalo TS1400D TeraStation 1400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Buffalo TS1400D TeraStation 1400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Buffalo TS1400D TeraStation 1400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Buffalo TS1400D TeraStation 1400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Buffalo TS1400D TeraStation 1400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Buffalo TS1400D TeraStation 1400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Buffalo TS1400D TeraStation 1400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
