Gebruiksaanwijzing /service van het product 3205 van de fabrikant ADTRAN
Ga naar pagina of 27
Application Dra wings: Rout ing across the W AN Revision C Page 1 of 27 Application Drawings Netvanta 3200/3205: Routing across the WAN T-1 Host Router Remote Router Host Switch Remote Switch ` PC ` PC ` PC ` PC ` PC ` PC 10.0.0.1 10.0.0.2 192.168.1.254 192.
Application Dra wings: Rout ing across the W AN Revision C Page 2 of 27 Overview This application drawing s hows how to use NetVanta 3200s or NetVant a 3205s in a scenario where there is a point -to-point T-1 that is used for data.
Application Dra wings: Rout ing across the W AN Revision C Page 3 of 27 Configura tion step s using the w eb interface for NetV ant a 3200/3205 “ Host Ro uter”: 1. Choose "Physical Interfaces " from the left hand side menu options. 2. Choose "eth 0/1" from th e list of physical interfaces displ ayed.
Application Dra wings: Rout ing across the W AN Revision C Page 4 of 27 4. Press the “Appl y ” button. Note: If you choose to ch ange the IP address of Ethernet 0/1, you will need to change the IP address of your works tation to an IP on the same network as Ethernet 0/1 to continue configuring the router.
Application Dra wings: Rout ing across the W AN Revision C Page 5 of 27 7. Checked the box nex t to "Enable"..
Application Dra wings: Rout ing across the W AN Revision C Page 6 of 27 8. Next to “Clocking” choose “ Internal”..
Application Dra wings: Rout ing across the W AN Revision C Page 7 of 27 9. Choose "1" in the first drop down next to "Data DS0s" and "24" in the s econd drop down.
Application Dra wings: Rout ing across the W AN Revision C Page 8 of 27 10. Choose "PPP" next to "Encapsulation"..
Application Dra wings: Rout ing across the W AN Revision C Page 9 of 27 11. Press "Appl y " and new screen wil l appear that is titled "PPP C onfiguration for ppp 1".
Application Dra wings: Rout ing across the W AN Revision C Page 10 of 27 12. Under the "IP Settings" s ection change "Address T y pe" to "Static". 13. Fill in the "IP Address" a nd "Subnet Mask" y ou would lik e to use.
Application Dra wings: Rout ing across the W AN Revision C Page 11 of 27 14. Press "Appl y ". 15. Choose "Route Table" fr om the left hand side menu opti ons.
Application Dra wings: Rout ing across the W AN Revision C Page 12 of 27 16. Fill in 192.168.2.0 for the "Desti nation Address" and 255.255.255.0 for the "Destination Mask". 17. Choose "Address" under "Gateway" and type 10.
Application Dra wings: Rout ing across the W AN Revision C Page 13 of 27 18. Press "Add". 19. Configuration is now do ne and all that left to do is choose "Sav e" in the upper right hand corner.
Application Dra wings: Rout ing across the W AN Revision C Page 14 of 27 Configura tion Scri pt for the Ne tV ant a 3200/3205 “Host Router”: ! ! hostname "HostRouter" enable password adt.
Application Dra wings: Rout ing across the W AN Revision C Page 15 of 27 ! ! ! ! ip route 192.168.2.0 255.255.25 5.0 10.0.0.2 ! no ip n-form agent ip http server no ip http secure-server no ip snmp ag.
Application Dra wings: Rout ing across the W AN Revision C Page 16 of 27 Configura tion step s using the w eb interface for NetV ant a 3200/3205 “ Remote R outer”: 1. Choose "Physical Interfaces " from the left hand side menu options. 2.
Application Dra wings: Rout ing across the W AN Revision C Page 17 of 27 4. Press the “Appl y ” button. Note: If you choose to ch ange the IP address of Ethernet 0/1, you will need to change the IP address of your works tation to an IP on the same network as Ethernet 0/1 to continue configuring the router.
Application Dra wings: Rout ing across the W AN Revision C Page 18 of 27 7. Check the box nex t to "Enable", to enable the interface..
Application Dra wings: Rout ing across the W AN Revision C Page 19 of 27 8. Select "1" in the “Data DS0 s” drop down list and "24" in the second drop d own.
Application Dra wings: Rout ing across the W AN Revision C Page 20 of 27 9. Choose "PPP" from the " Encapsulation" options..
Application Dra wings: Rout ing across the W AN Revision C Page 21 of 27 10. Press "Appl y " and a new screen will appear to configure the PPP i nterface.
Application Dra wings: Rout ing across the W AN Revision C Page 22 of 27 11. Under the "IP Settings" s ection change the "Address T y pe" to "Static". 12. Fill in the "IP Address" a nd "Subnet Mask" y ou would lik e to use.
Application Dra wings: Rout ing across the W AN Revision C Page 23 of 27 13. Press "Appl y ", when done. 14. Choose "Route Table" fr om the left hand side menu opti ons.
Application Dra wings: Rout ing across the W AN Revision C Page 24 of 27 15. Using the information fo r the application drawings example, fill in 0.0.0.0 for the "Destination Address" an d 0.0.0.0 for the "Destination Mask". 16. Choose "Address" under the "Gateway" and type 10.
Application Dra wings: Rout ing across the W AN Revision C Page 25 of 27 17. Press "Add". 18. Configuration is now do ne and all that left to do is choose "Sav e" in the upper right hand corner.
Application Dra wings: Rout ing across the W AN Revision C Page 26 of 27 Configura tion Scri pt for the Ne tV ant a 3200/3205 “Remote R outer”: ! ! hostname "RemoteRouter" enable passwor.
Application Dra wings: Rout ing across the W AN Revision C Page 27 of 27 ! ! ! ! ip route 0.0.0.0 0.0.0.0 10.0.0.1 ! no ip n-form agent ip http server no ip http secure-server no ip snmp agent no ip f.
Een belangrijk punt na aankoop van elk apparaat ADTRAN 3205 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ADTRAN 3205 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ADTRAN 3205 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ADTRAN 3205 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ADTRAN 3205 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ADTRAN 3205 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ADTRAN 3205 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ADTRAN 3205 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
