Gebruiksaanwijzing /service van het product R 1660 van de fabrikant Bush Hog
Ga naar pagina of 108
©2010 Alamo Group Inc. $0.00 Published 10/10 Part No. 50068816C OPERA T OR’S MANUAL BUSH HOG ® 2501 Grif fin A ve. Selma, AL 36703 334-874-2700 www .bushhog.com REAR-MOUNT BOOM MOWER This Operator' s Manual is an integral p art of the safe operation of this machine and must be maintaine d with the un it at all times.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazardous . There is no substitute for a cautious, safe-minded operator who recognizes the poten tial hazards and follows reasona ble safety practices.
In order to reduce accident s and enhance the safe operatio n of mowers, Bush Hog Division, in cooperation with other indust ry manufact urers has dev eloped the AEM/F EMA Industrial and Ag ricultural Mower Safety Practices video and guide book.
Alamo Gr oup Ag. Division is willing to pr ovide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator S.
T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ........... 1- 1 General Safety Instructions and Practic es .......... ................ ................... .......
STARTING THE TRACTOR . .... ... ... ... .... ... ............. ... ... ... ............. .... ... ... ............. ... ... .... ............. ... . .................. 4-10 PRE-OPERATION INSPECTION AND SERVI CE .............. .........................
Safety Section 1-1 © 2010 Alamo Group Inc. SAFETY SECTION.
SAFETY RMB 1660 11/10 Safety Section 1-2 © 2010 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY RMB 1660 11/10 Safety Section 1-3 © 2010 Alamo Group Inc. SAFETY Operator Safety Instr uctions and Practices Engine Exhaust, some of its constitue nts, a nd cert ain vehicle component s contain or emit chemicals known to the st ate of California to cause cancer and bir th defects or other reproductive harm.
SAFETY RMB 1660 11/10 Safety Section 1-4 © 2010 Alamo Group Inc. SAFETY KEEP A W A Y FROM ROT A TING ELEMEN TS to prevent ent anglement and possible serious injury or death. (SG-24) Never allow children to play on or around T ractor or Implement. Children can slip or fall off the Equipment and be injured or killed.
SAFETY RMB 1660 11/10 Safety Section 1-5 © 2010 Alamo Group Inc. SAFETY Connecting & Disconnecting Implem ent Safety Instructi ons & Practices The rota ting parts of th is machine continue to rotate even af ter the T ractor has been turned of f.
SAFETY RMB 1660 11/10 Safety Section 1-6 © 2010 Alamo Group Inc. SAFETY Equipment Operation Safety In structions and Practices Never leave the T ractor and Implement unattended while the Implement is in the lif ted position.
SAFETY RMB 1660 11/10 Safety Section 1-7 © 2010 Alamo Group Inc. SAFETY Follow these guidelines to red uce the risk of equipment and grass fires w hile operating, serv icing, and repairing the Mower and T ractor: -Equip the T ractor with a fire extinguisher in an accessible location.
SAFETY RMB 1660 11/10 Safety Section 1-8 © 2010 Alamo Group Inc. SAFETY Flail Mowers are capa ble under adverse conditions of throwing objects for great distances ( 300 feet or more) and causing seri ous injury or death. Follow safety messages carefully .
SAFETY RMB 1660 11/10 Safety Section 1-9 © 2010 Alamo Group Inc. SAFETY Do not mount or dismou nt the Tr actor while the tractor is moving. Mount the T ractor only when the T ractor and all moving part s are completely stopped. (SG-12) S tart tr actor only when properly seated in the T ractor seat.
SAFETY RMB 1660 11/10 Safety Section 1-10 © 2010 Alamo Group Inc. SAFETY Do Not operate this equip men t in areas wher e in se ct s such as bees may attack you and/or cause you to lose contro l of the equip ment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insect s from entering.
SAFETY RMB 1660 11/10 Safety Section 1-11 © 2010 Alamo Group Inc. SAFETY Mow at the speed that you can safely oper ate and control the tractor and mower . The correct mowing spee d depends on terrain cond itio n and grass type, density , and height of cut.
SAFETY RMB 1660 11/10 Safety Section 1-12 © 2010 Alamo Group Inc. SAFETY Maintenance and Service Saf ety Instructions and Practices Do not let the Blad es turn when the Mower Deck is raised for any reason, including clearan ce or for turning.
SAFETY RMB 1660 11/10 Safety Section 1-13 © 2010 Alamo Group Inc. SAFETY Always maint ain the safety signs in go od readab le conditio n. If the safety signs are missing, damaged, or unreadable , obtain and insta ll r eplacement safety signs immediately .
SAFETY RMB 1660 11/10 Safety Section 1-14 © 2010 Alamo Group Inc. SAFETY T ransporting Safety Inst ructions and Practices Replace bent or b roken blades with new blades.
SAFETY RMB 1660 11/10 Safety Section 1-15 © 2010 Alamo Group Inc. SAFETY Secure the boom an d mower head in the transpo rt position before traveling o n public roads. Never transport on public roads with t he boom and mower hea d extended. Always disengage and lock out the hydraulic controls for the boom mower be fore transporting.
SAFETY RMB 1660 11/10 Safety Section 1-16 © 2010 Alamo Group Inc. SAFETY Concluding Safety In structions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accidents and injuries can result from operating this equipment at high sp eeds.
SAFETY RMB 1660 11/10 Safety Section 1-17 © 2010 Alamo Group Inc. SAFETY Decal Location NOTE: Bush Hog supplies safety decals on this produ ct to promote safe oper ation.
SAFETY RMB 1660 11/10 Safety Section 1-18 © 2010 Alamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D433 1 Decal Sheet Multiple Haza rd 2. D388 1 D ecal She et Driveline Hazard s 3. D355 1 IMPOR T ANT Check Chains 4. 02962764 6 W ARNING Pinch Points/Scissors 5.
SAFETY RMB 1660 11/10 Safety Section 1-19 © 2010 Alamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 50061049 1 LOGO Bush Hog Logo (22” ) 2. 24028 1 W ARNING Rubber Defle ctors 3. 02965141 1 WARNING Thrown Object s 4. 1290738 1 INSTRUCT Euro Mu lti-Instruction Flail Head 5.
SAFETY RMB 1660 11/10 Safety Section 1-20 © 2010 Alamo Group Inc. SAFETY Decal Description Multi Hazard Decal Sheet P/N D433 Decal D433 consists of the following multi-hazards.
SAFETY RMB 1660 11/10 Safety Section 1-21 © 2010 Alamo Group Inc. SAFETY Driveline Hazards P/N D388 Decal D388 consist s of th e following multi-hazards.
SAFETY RMB 1660 11/10 Safety Section 1-22 © 2010 Alamo Group Inc. SAFETY IMPOR T ANT! Keep Sway Bar Chains T ight P/N D355 W ARNING! Pinch Points P/N 02962764 DANGER! Crushing and Pinch Point s. Moving machinery p arts can pinch or crush or fall- which may cause injury or death.
SAFETY RMB 1660 11/10 Safety Section 1-23 © 2010 Alamo Group Inc. SAFETY DANGER! Crushing Hazard Serious injury can result fr om contact with moving boom.
SAFETY RMB 1660 11/10 Safety Section 1-24 © 2010 Alamo Group Inc. SAFETY INFORMA TION - Safety Booklet D524 Read Operato r ’s Manual! The operator ’s ma nual is located inside this canister . If the manual is missing order one from you r dealer .
SAFETY RMB 1660 11/10 Safety Section 1-25 © 2010 Alamo Group Inc. SAFETY TO A VOID SERIOUS INJURY OR DEA TH only operate on T ractor eq uipped with fully enclosed CAB. P/N D569 W ARNING! Inspect Rubber Deflector and replace if damaged or notice ably worn.
SAFETY RMB 1660 11/10 Safety Section 1-26 © 2010 Alamo Group Inc. SAFETY Euro Multi Decal P/N 09.821.35 Red Reflector . Keep reflectors clean and visible. P/N 1458392 Amber Reflector . Keep reflectors clean and visible. P/N 1458393 Grease 8 Hour s P/N 09.
SAFETY RMB 1660 11/10 Safety Section 1-27 © 2010 Alamo Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations conce rning employer and employee eq uipment operators.
.
Introduction Section 2-1 © 2010 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION RMB 1660 11/10 Introduction Section 2-2 © 2010 Alamo Group Inc. INTRODUCTION This Hydraulic Boom Mower is des ign ed with care and built with quality materials by skilled w orkers.
INTRODUCTION RMB 1660 11/10 Introduction Section 2-3 © 2010 Alamo Group Inc. INTRODUCTION The Bush Hog Boom Mowe r is primarily designed fo r grass cutting and trimming hedges. This mower is assembled for oper ation with 540 RPM tractor input only . With proper use and maintena nce the mower should provide years of depen dable service.
INTRODUCTION RMB 1660 11/10 Introduction Section 2-4 © 2010 Alamo Group Inc. INTRODUCTION A TTENTION OWNER/ OPERA TOR BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely underst and the Safety Messages and instr uctions, and know how to operate correctly both the Mowe r and Power Unit.
Assembly Section 3-1 © 2010 Alamo Group In c. ASSEMBL Y SECTION.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-2 © 2010 Alamo Group Inc. ASSEMBL Y TRACTOR SELECTION MINIMUM TRACTOR WEIG HTS - including ballast weight if necessary: All models – 6,600 lbs. MINIMUM HP REQUIREMENTS: All models – 60 PTO HP LINKAGE: Category 2 P.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-3 © 2010 Alamo Group In c. ASSEMBL Y TRACTOR PREP ARA TION Fitting Operator Guard Use tractor with safety glass windows if possible and fi t Operator guard using the h ooks provided. Shape me sh to cover all vu lnerable areas.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-4 © 2010 Alamo Group Inc. ASSEMBL Y Suggestions to increase st ability: • Increasing rear wheel track; a tractor with a wider whee l track is more stable.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-5 © 2010 Alamo Group In c. ASSEMBL Y A TT ACHMENT TO TRACT OR • Reverse tractor squarely up to the machine. • Connect the tractors sway bars - selecting the rear most hole in th e machines lower link brackets that allow th e machine to be moun ted without contactin g the tractor .
ASSEMBLY RMB 1660 11/10 Assembly Section 3-6 © 2010 Alamo Group Inc. ASSEMBL Y • Fit the machine to top link • Raise machine on tractor linka ge until the tractors PTO and the machines gearbox stub sh aft are approximately in line. NOTE: As lift occurs be aware t he machine m ay tilt slightly .
ASSEMBLY RMB 1660 11/10 Assembly Section 3-7 © 2010 Alamo Group In c. ASSEMBL Y • Replace the stabilizer quad rant pin and secure with the clip pin. NOTE: The quadrant pin must be fitted in the lowest hole on the stabilizer in order that it acts as a “Bottom S top”.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-8 © 2010 Alamo Group Inc. ASSEMBL Y Check that the welded in pins betw een the stabilizers jaws are in contac t with the mounting rail. If not the machine must be lowered to the ground and the next higher hole on the stabilizer valve selected, the machine raised and cont act checked.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-9 © 2010 Alamo Group In c. ASSEMBL Y • Adjust using the mounting hole that allows the P .T .O. and gearbox shaft to align as near as possible.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-10 © 2010 Alamo Group Inc. ASSEMBL Y • Raise the stand legs in to the work position and secure with lock pins. • T ighten check chains and/or stabilizer bars. • Fit machine controls into the cab. • Measure P .
ASSEMBLY RMB 1660 11/10 Assembly Section 3-11 © 2010 Alamo Group In c. ASSEMBL Y • Fit PTO shaf t in position. • Attach safety chain s (A) on driveline to a convenient lo cation to prev ent rotation of the shaft gu arding. • Ensure the Lift Cylin der shut-off valve and Slew Cylinder shut-of f valve are open.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-12 © 2010 Alamo Group Inc. ASSEMBL Y Flail Head Att achment Operate machine controls to m aneuver boom arm into flailhead att achment. The bottom of the hose connection bracket must b e parallel with th e ground.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-13 © 2010 Alamo Group In c. ASSEMBL Y OIL REQUIREMENTS Ta n k Fill reservoir to approximately 2” be low the top of the tank. The capacity is approximately 180 liters (47.5 gallons). Do not overfill the tank.
ASSEMBLY RMB 1660 11/10 Assembly Section 3-14 © 2010 Alamo Group Inc. ASSEMBL Y RUNNING UP PROCEDURE 1. Ensure that the rotor control valv e is in "STOP" positi on, start tractor , engage P .T .O. allow the oil to circulate through th e return line filter for about 5 mi nutes without operation of the armhead control lever .
ASSEMBLY RMB 1660 11/10 Assembly Section 3-15 © 2010 Alamo Group In c. ASSEMBL Y STORAGE If machine is to be lef t standing for an extended p er iod of time, lightly coat the ex posed portions of the cylinder rods with grease. Subseq uently this grease should be wiped off before the rods are moved.
.
Operation Sec tio n 4- 1 © 2010 Alamo Group In c. OPERA TION SECTION.
OPERATION RMB 1660 11 /10 Operation Section 4-2 © 2010 Alamo Group In c. OPERA TION BUSH HOG RMB 1660 OPERATING INSTRUCTIONS Bush Hog Boom Mowers are man ufactured with quality material by skilled workers. Thes e mowers are designed for cutting gra ss and small weeds.
OPERATION RMB 1660 11 /10 Operation Section 4-3 © 2010 Alamo Group Inc. OPERA TION 1. St andard Equipment and Specifications T ractor Requirement s: Minimum T ractor HP Requirements 60 HP PTO Minimum T ractor W eight 6614lbs (3000kg) Machine Specifications: Maximum Machine Reach 16’-5” (5.
OPERATION RMB 1660 11 /10 Operation Section 4-4 © 2010 Alamo Group In c. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION RMB 1660 11 /10 Operation Section 4-5 © 2010 Alamo Group Inc. OPERA TION 3. TRACT OR REQUIREMENTS In addition to tractor horsep ower a nd size re quir ed to o per ate th e mower un it, the .
OPERATION RMB 1660 11 /10 Operation Section 4-6 © 2010 Alamo Group In c. OPERA TION 3.3 T ractor Lighting and SMV Emblem If the tractor will be operated near or traveled on a public roadw ay it must be equipped wit h proper warning lighting and a Slow Mo ving V ehicle (SMV) emblem which ar e clearly visible fro m the rear of the unit.
OPERATION RMB 1660 11 /10 Operation Section 4-7 © 2010 Alamo Group Inc. OPERA TION 3.6 T ractor Horsepower The horsepower requir ed to operate the mower depends on many factors including veget ation to be cut, terrai n condition, operato r experience, and condition of the mo wer and tractor .
OPERATION RMB 1660 11 /10 Operation Section 4-8 © 2010 Alamo Group In c. OPERA TION 3.9 Front End Weight A minimum of 20% tota l tractor weight must be maintained on the tractor fro nt end at all times. Front end weight is critical to mainta in steering control and to pr event the tracto r from rearin g up while driving.
OPERATION RMB 1660 11 /10 Operation Section 4-9 © 2010 Alamo Group Inc. OPERA TION 4.1 Boarding the T r actor Use both hands and equippe d handrails and steps for supp ort when boarding the tractor . Never use control levers for support wh en mounting the tractor .
OPERATION RMB 1660 11/10 O peration Section 4-10 © 2010 Alamo Group In c. OPERA TION 5. ST ARTING THE TRACTOR The operat or must have a co mplete und erstanding of the p lacement, fun ction, and op erational us e of all tractor cont rols before starting th e tractor .
OPERATION RMB 1660 11/10 O peration Section 4-11 © 2010 Alamo Group Inc. OPERA TION 6. PRE-OPERA TION INSPECTION AND SER VICE Before each use, a pre- operation inspection and service of the implement and tractor must be perform ed.
OPERATION RMB 1660 11/10 O peration Section 4-12 © 2010 Alamo Group In c. OPERA TION 6.2 Boom Unit Pre-Operati on Inspection and Service Inspect and service the boom arm a nd head prior to operatio n. Damaged and/or broken p arts should be repaired an d/or replaced immediately .
OPERATION RMB 1660 11/10 O peration Section 4-13 © 2010 Alamo Group Inc. OPERA TION FRAME ASSEMBL Y • Ensure all bolt s and screws are in position and are properly to rq ue d . • Ensure all pins are in place and fastened with screws. • Ensure frame is pro perly mounted to tractor and hardware is properly installed and tighten ed.
OPERATION RMB 1660 11/10 O peration Section 4-14 © 2010 Alamo Group In c. OPERA TION Relieve hydraulic pressure prio r to doing any maintenance or rep air work on the Implement. Place the Mower Head on the grou nd or secur e ly supp orte d on blocks o r st ands, disengage the PTO, and turn off the engine.
OPERATION RMB 1660 11/10 O peration Section 4-15 © 2010 Alamo Group Inc. OPERA TION Attention: Oil Filler Cap is also the Pressure Relief Cap. Remove cap slo wly to relieve pressure before re moving cap completely .
OPERATION RMB 1660 11/10 O peration Section 4-16 © 2010 Alamo Group In c. OPERA TION SICKLE BAR INSPECTION • Inspect blades and blade bolts for looseness and excessive wear . Replace damaged, worn, and missing blades. • Ensure guards ar e in position and not damaged.
OPERATION RMB 1660 11/10 O peration Section 4-17 © 2010 Alamo Group Inc. OPERA TION Boom Mower PRE-OP ERA TION Inspection Mower ID#:__________________________Make:______________________ Date:________.
OPERATION RMB 1660 11/10 O peration Section 4-18 © 2010 Alamo Group In c. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#:___________ _____________Make:________________________ Date:______.
OPERATION RMB 1660 11/10 O peration Section 4-19 © 2010 Alamo Group Inc. OPERA TION 7. MACHINE CONTROLS 7.1 Cable Controls - Identification & Function.
OPERATION RMB 1660 11/10 O peration Section 4-20 © 2010 Alamo Group In c. OPERA TION 7.2 Lever Functions.
OPERATION RMB 1660 11/10 O peration Section 4-21 © 2010 Alamo Group Inc. OPERA TION 7.3 Rotor Control.
OPERATION RMB 1660 11/10 O peration Section 4-22 © 2010 Alamo Group In c. OPERA TION 8. BREAKA W A Y The machine is fitted with a hydraulic breakaway device which protect s the structur e of the machine should a n unforeseen o bstacle be encounter ed.
OPERATION RMB 1660 11/10 O peration Section 4-23 © 2010 Alamo Group Inc. OPERA TION 9. ROT OR OPERA TING SPEED Ensure that the ro tor control lever is in the ‘ST OP’ position before engaging the PT O shaft. Allow the oil to circulate for a minute or so before op er ating the armhead levers.
OPERATION RMB 1660 11/10 O peration Section 4-24 © 2010 Alamo Group In c. OPERA TION 12. Hedge Cutting Procedure Cut the side and bottom of the field side first. This leaves the maximum thickness of hedge on the road side to prevent the possibilit y of any debris bei ng thrown through the hedge into the p ath of oncoming vehicles.
OPERATION RMB 1660 11/10 O peration Section 4-25 © 2010 Alamo Group Inc. OPERA TION 12.1 Working on Adverse Slopes When working high with the reach fully extended, it is possible for the main arm balance to go ‘Over- Center ’ and take the weight of f the lift cylinder .
OPERATION RMB 1660 11/10 O peration Section 4-26 © 2010 Alamo Group In c. OPERA TION 14. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport req uires the operator to po ssess a thorou gh knowledge of the model b eing operated and precaution s to take while driving with a n attached implement.
OPERATION RMB 1660 11/10 O peration Section 4-27 © 2010 Alamo Group Inc. OPERA TION 14.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor .
OPERATION RMB 1660 11/10 O peration Section 4-28 © 2010 Alamo Group In c. OPERA TION 14.3 Driving the T ractor and Bo om S tart of f driving at a slow speed and gradu ally increase your speed while maintainin g complete control of the tractor .
OPERATION RMB 1660 11/10 O peration Section 4-29 © 2010 Alamo Group Inc. OPERA TION 15.1 Foreign Debris Hazards Before mowing, inspe ct the area to make sure there are no fore ign objects that the mo wer blades could hit or b ecome entangled w ith. Remov e all foreign object s and debris.
OPERATION RMB 1660 11/10 O peration Section 4-30 © 2010 Alamo Group In c. OPERA TION Flail Mowers are capa ble under adverse conditions of throwing objects for great distances ( 300 feet or more) and causing seri ous injury or death. Follow safety messages carefully .
OPERATION RMB 1660 11/10 O peration Section 4-31 © 2010 Alamo Group Inc. OPERA TION 15.4 Operating Speed and Ground S peed Ground speed for mowing will depend upon the height, type, and density of veget ation to be cut. Do Not exceed 2 MPH while op erating.
OPERATION RMB 1660 11/10 O peration Section 4-32 © 2010 Alamo Group In c. OPERA TION There are obvio us and hidden potential hazards in the operation of this Mower . REMEMBER! This machine is of ten operated in heavy br ush and in heavy weeds. The Bla des of this Mower ca n throw objects if shields are not pro perly installed and maint ained.
OPERATION RMB 1660 11/10 O peration Section 4-33 © 2010 Alamo Group Inc. OPERA TION 15.6 Operating the Att ached Mower Heads Refer to the Assembly Sectio n of this manual to ensure the h ead is properly atta ched to the boom hitch an d hydraulic line s are prop erly connect ed.
OPERATION RMB 1660 11/10 O peration Section 4-34 © 2010 Alamo Group In c. OPERA TION 15.7 Shutting Down the Att ached Head T o shut down attached mower head , first bring the tractor to a complete stop. Decrease engine RPM to idle then disengage cutterhea d.
OPERATION RMB 1660 11/10 O peration Section 4-35 © 2010 Alamo Group Inc. OPERA TION 16. TRACTOR, BOOM, AND A TT ACHED HEAD STORAGE Properly prep aring and storing the unit at the end of the se ason is critical to mainta ining its appearan ce and to help ensure years of dep endable service.
OPERATION RMB 1660 11/10 O peration Section 4-36 © 2010 Alamo Group In c. OPERA TION 17.1 T ransport Position • Select ROTOR OFF and wait until rotor has stopped tu rning • Ensure that the “LIFT” and “ANGL E FLOA T” are switched “OFF” • Select “SLEW” mode on the control assembly .
OPERATION RMB 1660 11/10 O peration Section 4-37 © 2010 Alamo Group Inc. OPERA TION 18. TRANSPORT POSITION-Head Att ached The machine is transported in line to the rear of the tractor with a minimum of 1 1-1/4” clearance between the tension link and the rear cross member of the tractor cab.
OPERATION RMB 1660 11/10 O peration Section 4-38 © 2010 Alamo Group In c. OPERA TION 19.1 T ransport Height There is no fixed dimension for tra nsport height. It will vary depending on the he ight that the machine is carried and the de gr ee o f arm fo ld that the rea r of the cab will allow .
OPERATION RMB 1660 11/10 O peration Section 4-39 © 2010 Alamo Group Inc. OPERA TION Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly visible and legible.
OPERATION RMB 1660 11/10 O peration Section 4-40 © 2010 Alamo Group In c. OPERA TION When operating on public roa ds, have consideration for other r oad users. Pull to the side of the road oc casionally to allow all following traffic to pass. Do no t exceed the legal speed limit set in your state or muni cipality for agricultural tractors.
OPERATION RMB 1660 11/10 O peration Section 4-41 © 2010 Alamo Group Inc. OPERA TION 19.3 Hauling the T racto r and Implement Before transporting a loade d tractor and implement, measure the height and width dimensions and g ross weight of the complete loaded unit.
OPERATION RMB 1660 11/10 O peration Section 4-42 © 2010 Alamo Group In c. OPERA TION 20. TROUBLESHOOTING GUIDE TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Hydraulic Cylinder Hydraulic level low . Check hydraulic fluid level. Not Working (See sight gauge on tank) Pump not functioning Attempt to use another cylinder or properly .
OPERATION RMB 1660 11/10 O peration Section 4-43 © 2010 Alamo Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Excessive Vibration s Blade Broken. Replace blades, in sets . Blade carrier bent. Replace carrier . Blade hub not properly Remove hub, check t apered spline seated on shaf t shaf t, clean and replace.
.
Maintenanc e Sec tio n 5- 1 © 2010 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-2 © 2010 Alamo Group Inc. MAINTENANCE LUBRICA TION General Grease all locatio ns shown da ily . PTO SHAFT INSPECTION Regularly check the PT O guards for damage a nd ensure the anti rota tion chains are in place and that their anchor point s are in good condition.
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-3 © 2010 Alamo Group Inc. MAINTENANCE HYDRAULIC SYSTEM Oil Supply Check daily the oil leve l in the reservoir . No fixed time period can be quo ted for oil chan ges as operating co nditions and mainte nance st and ards vary so widely .
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-4 © 2010 Alamo Group Inc. MAINTENANCE Hose Replacement 1. Rep lace one hose at a time to avoid the risk of wrong connections. 2. Whe n the hose is screwed to an additional fittin g or union, use a second sp anner on the union to avoid breaking both seals.
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-5 © 2010 Alamo Group Inc. MAINTENANCE FLAILHEAD 1. Frequently inspe ct the rotor assembly for damaged or mi ssing flails. Bolt s and nu ts securin g the flails to the rotor should be regularly checked and kept tight.
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-6 © 2010 Alamo Group Inc. MAINTENANCE PTO GEARBOX Refill the gearbox after the first initia l 50 hours and thereafter yearly or 500 hour intervals. or whichever comes first. Drainage of the gearbox for an oil change is via the drai n plug located on the base of the gearbox.
MAINTENANCE RMB 1660 11/10 Maintenance Section 5-7 © 2010 Alamo Group Inc. MAINTENANCE PROPER TORQUE V ALUES FOR F ASTENERS The chart lists the correct tightening to rque for fastener s.
LIMITED W ARRANTY Bush Hog warrant s to the origina l purchaser of any new Bush Hog equipment, purchas ed.
T O THE OWNER/OPERA TOR/DEALER T o keep your implement running ef ficiently and safely , read your manual thoroughly a nd follow these directions and the Safety Messages in this Manua l. The T able of Contents clearly id entifies each section wher e you can easily find the informa tio n yo u ne ed .
RMB 1660-1 1/10 P/N 50068816C Printed U.S.A RMB 1660 REAR MOUNT BOOM MOWER.
Een belangrijk punt na aankoop van elk apparaat Bush Hog R 1660 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bush Hog R 1660 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bush Hog R 1660 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bush Hog R 1660 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bush Hog R 1660 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bush Hog R 1660 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bush Hog R 1660 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bush Hog R 1660 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
