Gebruiksaanwijzing /service van het product 6000 van de fabrikant Cabletron Systems
Ga naar pagina of 58
ETHERNET 6E233-49 24 48 37 36 25 24 1 12 5 9 67 8 10 11 12 1234 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 13 RESET COM CPU Title Page .
.
i NOTICE Cabletron Systems reserves t he right to make changes in specificati ons and ot her informati on contained in this d ocument without prio r notice. The reader should in a ll cases con sult Cable tron Sy stems to de termine wheth er any such ch anges have been m ade.
ii FCC NOTICE This de v ic e co mplies with P art 15 of the FCC rules. Operat ion is sub ject to th e follo wing two condit ion s: (1) t h is de vice may not cause harmful in terference, and (2 ) this device mus t accept any interfe rence received, including interference th at may ca u se undesir e d op e r at ion.
iii CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT IMPORTANT: THIS LICENSE APPLIES FOR USE OF PRODUCT IN THE FOLLOWING GEOGRAPHICAL REGIONS: CANADA MEXICO CENTRAL AMERICA SOUTH AMERICA BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT.
iv If the Program is ex ported f rom the Uni ted States pursua nt to the License Ex ception TSR un der the U.S . Export Administ ration Re gulations, in addition to the restricti on on transfe r set f.
v CABLETRON SYSTEMS SALES AND SERVICE, INC. PROGRAM LICENSE AGREEMENT IMPOR T ANT : THIS LICENSE APPLIES FOR USE OF PR ODUCT IN THE UNITED ST A TES OF AMERICA AND BY UNITED ST A TES OF AMERICA GO VERNMENT END USERS. BEFORE OPENING OR UTILIZING THE ENCLOSED PR ODUCT , CAREFULL Y READ THIS LICENSE A GREEMENT .
vi 5. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The encl osed P rod uc t (i ) was d ev elop e d so le ly at private expense; (ii) conta ins “restric ted computer software” submitted with restricted rights in accord ance with section 52.
vii CABLETRON SYSTEMS LIMITED PROGRAM LICENSE AGREEMENT IMPOR T ANT : THIS LICENSE APPLIES FOR THE USE OF THE PR ODUCT IN THE FOLLO WING GEOGRAPHICAL REGIONS: EUR OPE MIDDLE EAST AFRICA ASIA A USTRAL IA P A CIFIC RIM BEFORE OPENING OR UTILIZING THE ENCLOSED PR ODUCT , CAREFULL Y READ THIS LICENSE A GREEMENT .
viii If the Program is exported from the United States pursuant to the Li cen se Exception TSR under the U.S. Ex po rt Administ ration Re gulations, in addition to the restricti on on transfe r set fo.
ix SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE GPIM-01 AND GPIM-09 GIGABIT ETHERNET MODULE S USE CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLIN G OR OPERATING THESE M ODULES. The Class 1 laser transcei vers use an o p tical fe edba ck loop to mainta in Class 1 operation limits.
x DECLARATION OF CONFORMITY Appl icatio n o f Coun cil D irec ti ve(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Cabletron Systems, Inc. Manuf acturer’ s Addr ess: 35 Indu st rial Way PO Box 50 05 Rochest er, NH 03867 Europe an Representati ve Name: Mr.
xi Contents Figure s ...... ....... ...... ....... ....... ........ ....... ....... ...... ....... ......... ...... ....... ....... ...... ......... ....... . .... xiii Tables ........ ............. ............ . ....... ............. .......... ....
xii 2 NETWORK REQUIREMENTS 2.1 Smar tT runk ..... .......................... .................... ................... ................... ............. 2-1 2.2 10BASE-T Ne twork .................. .......................... ................... .......
xiii Figures Figure Pa g e 1-1 The 6E233-49 SmartSw itch .. .................... ................... ................... .......................... ...... 1-2 3-1 Installing an Interface Module ............ ....... ...... ....... ...... ....... ......
xiv Ta b l e s Ta b l e P age 3-1 Contents of 6E233-49 S martSwitch Carton ............... ................... ................... .............3-2 4-1 LANVIEW LEDs CPU, Rec eive, and Trans mit Status .................. ................... ...........
xv About This Guide W e lcome t o the C able tr on Sy stems 6E233-49 SmartSwit ch 6000 Interface Modul e User’s Guide . This gui de descri bes the SmartSwitc h module and pro vides informati on concerning netw ork requ irements, i nstallation, and troubl eshooting.
Stru cture of This Guide xvi STRUCTURE OF THIS GUIDE This gui de is orga nized as follo ws: Chapter 1 , In troduction , o utlines the conten ts of thi s manual, descr ibes the fe ature s of the SmartS witch module , and provide s instructions for gett ing additional help.
Related Doc uments xvii RELATED DOCUMENTS • SmartSwit ch Series 6H202, 6H203, 6H252 , 6H253, 6H258, 6H259, 6H262, 6E23 3, and 6E253 Local Mana gement User’ s Guide • 6C105 SmartS witch 6000 Over view and Se tup Guide • Ethernet T ec hnology Guid e • Cabling Gui de • 802.
Related Docum ents xviii DOCUMENT CON VENTIONS The foll owing con v entions are u sed throug hout this document : NO TE Note symbol. Cal l s the reader’ s attention to an y item of inf ormation that m a y be of special impor tance. TIP Tip symbol. Conv eys hel pful hi nts concer ning procedures or actions .
Introducti on 1-1 1 Intr oduction This chap ter introduces the 6E233-49 SmartS w it ch 6000 de vice and pro vides infor m ati on about ho w to obtain addit ional support f rom Cabl etron Syst ems. 1.1 OVERVIEW The 6E233-4 9 SmartSwitch, sho wn in Figure 1-1 , is an Ether net interf ace module f or the Cabletr on Sys te ms 6C105 c has si s.
Ov er vie w 1-2 Introduc tion Figure 1-1 The 6E 233-49 Smar tSw itch ETHERNET 6E233-49 24 48 37 36 25 24 1 12 5 9 67 8 10 11 12 1234 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 3.
Ov er vie w Introdu ction 1-3 1.1.1 Connectivity The 6E233-4 9 SmartSwitch connec ts to Ethernet networks or w orkstations through t he four RJ21 connecto rs on the front panel. Thes e ports support Un shielded T wisted P air (UTP) cabl es with an impeda nce between 85 and 111 ohms at le ngths up to 100 me ters.
Ov er vie w 1-4 Introduc tion 1.1.4 Full Duplex Switched Ethernet Each sw itched Et hernet por t on the 6E233-49 S m art Switch can b e configur ed to o perate i n Full Duple x Switched Ethernet (FDSE) mode. FDSE allo ws each port t o prov ide up to 2 0 Mbps of band width.
Ov er vie w Introdu ction 1-5 1.1.8 P or t/VLAN Redirect Functio ns The port redirect funct ion, also referred to as “Port Mirr oring,” is a tr oubleshooting t ool used t o map traf fi c from a single sour ce port to a sing le destinatio n port wit hin the de vice.
Ov er vie w 1-6 Introduc tion 1.1.10 GARP Switch Operation Some or all port s on th e switch may be activ ated to o perate und er the Generic At trib ute Regi strati on Protocol (GARP) appli cations , GARP VLAN Regi strati on Protoco l (GVRP) and/ or GARP Multicast R e gistra tion Protocol (GMRP).
Ov er vie w Introdu ction 1-7 1.1.14 Distributed Chassis Management From a manage m ent perspect i ve, the 6C105 SmartSwitch 6000 chassis can be vie wed as a sin gle entity with a single IP address. Its sys tems mana gement func tions are dist rib uted to all modul es.
Getting H elp 1-8 Introduc tion 1.2 GETTING HELP F or addit ional supp ort related t o this de vice or document, co ntact Cabletron Systems usi ng one of the follo wing methods: Befo re cal ling Ca bl.
Network Requirement s 2-1 2 Netw ork Requirements Before i nstalli ng the 6E233-49 Sm artSwitch , revi ew the re quiremen ts and spe cificat ions referred to in t his chapter conc er nin g the SmartT runk f eat ur e ( Section 2.1 ) and the10B ASE-T T wisted P air Netw ork ( Sect ion 2.
.
Install ation 3-1 3 Installa tion This chap ter provid es the instruct ions r equired t o instal l the 6E233-49 Sm artSwitc h. Follo w the order of the sect ions listed be lo w to ensure a pr oper inst alla tion: • Required tools ( Section 3.1 ) • Unpacking the 6E233-49 SmartSwi tch ( Section 3.
Installi ng Op tio n s 3-2 Insta llation . 3.3 INSTALLING OPTIONS If the 6E233-49 SmartSwi tch is to be installed wi th an op tional HSI M, refer to the i nstallation instr uct ion s shi ppe d with t he HSIM. The HSIM must be ins ta ll ed bef or e the 6E233- 49 is i nst al led in the c hassis.
Installi ng the 6E2 33-49 Smar tS witch in to the 6C105 Chassis Install ation 3-3 3. Locate the anti static wri st strap shi pped with the 6C105 chas sis. Attach the antis tatic wrist st rap to your wr ist and plug the cable from the an tistatic wri st strap into the ESD groundi ng recept acle at the uppe r right corn er of t he 6C105.
Installi ng the 6E2 33-49 Smar tS witch in to the 6C105 Chassis 3-4 Insta llation Figure 3-1 Installing an Inter face Module 1 2 3 45 PS1 PS2 Plastic Locking T ab Slot Number 2693-02 2159-01 Circuit C.
Connecti ng to the Networ k Install ation 3-5 3.5 CONNECTING TO THE NET W ORK This s ection pr ovides the pro cedures fo r connecti ng unshiel ded twis ted pair ( UTP) se gments to the modules. T o make conne ctions to an optional HSIM instal led in the HSIM slot of a Smar tSwitch, r efer to the instru ctions shipped wi th tha t de vice.
Connectin g to the Networ k 3-6 Insta llation Figu re 3 -2 S tra ight Cable Con nect ion ETHERNET 6E233-49 24 48 37 36 25 24 1 12 5 9 67 8 10 11 12 1234 13 RESET COM CPU 2693_07 RJ21 Screw Screw Port .
Connecti ng to the Networ k Install ation 3-7 Figure 3-3 Connection Us ing the RJ21 Angle A dapter 3. Tighten the two screws on t he RJ21 s traight cable connector or RJ21 angle adapt er, as appli cable , to sec ure it to the d evic e. 4. If using the RJ21 angl e ada pter, plug the RJ21 righ t- angl ed conne cto r as shown in Fi gure 3-3 .
Completin g the Insta llation 3-8 Insta llation b. Verify that the RJ21 conne ctor associat ed with the twisted pair segment has the proper pino uts and che ck the cable for conti nuity. c. Check tha t the twisted pai r conn ection meets the dB l os s and cable spec if ic ations outline d in Chapt er 2 .
T ro ubl eshooti ng 4-1 4 T r oub leshooting This chap ter provid es information c oncerning t he follo wing: • Using the LANVIEW diagnostic and s t atus monitori ng system ( Sectio n 4.1 ) • T roubleshoo ting netw ork and module operatio nal probl ems ( Section 4 .
Using LANVIEW 4-2 T roubleshoot ing Figure 4-1 LANVIEW LEDs ETHERNET 6E233-49 24 48 37 36 25 24 1 12 5 9 67 8 10 11 12 1234 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 3.
Using LA NVIEW T r oubleshooting 4-3 NO TE NO TE NO TE NO TE The ter ms flashing , bl inking , and solid used in th e LED definition tab les of this chapter ind i cate the f ollo wing: Flashing indi cates an irregul ar LED pulse. Blinking in dicates a steady LED pulse, (appr oximatel y 50% on, 50% off).
Using LANVIEW 4-4 T roubleshoot ing TX Of f Port enab led, and no acti vity . Should fl ash green e very tw o seconds i ndicating BPDUs bein g sent if ST A is enab led and th ere is a valid link. 1. Ensure that the ST A is enable d and that th ere is v alid lin k.
T r oubleshooting Checklist T r oubleshooting 4-5 4.2 T R OU BLESHOOTING CHECKLIST If th e 6 E233-49 SmartSwitch is not w or kin g pr ope rly , ref er t o Ta b l e 4 - 2 for a checkl ist of pos sib le problems, causes, and recommend ed actions to re solve the pr oblem.
T ro ubl eshooting Checklist 4-6 T roubleshoot ing T able 4-3 P ower Syst em T roubleshooting P os sible Causes Instruction Loss of po wer to the 6C105 chassi s. Perfor m the fol lo wing steps: 1. Check ON/OFF swit ches of 6C105 po wer su pplies. All switche s must be in the ON ( | ) posi tion.
T r oubleshooting Checklist T r oubleshooting 4-7 T a ble 4-4 Firmware T roubleshooting P oss ible Cause Instruction Autobaud en abled. Press ENTER (RETURN) (may tak e up to four times). T erminal setup is not co rrect . Refer to the Local Managem e nt Use r’ s G uide for s etup procedur es.
T ro ubl eshooting Checklist 4-8 T roubleshoot ing T able 4-5 Management System T r oubleshooting P ossi ble Causes Instruction Cannot ac cess Local Management. 1. Fir mware ima ge faul t - refe r to Ta b l e 4 - 4 . 2. Management syst em fault - re fer to Ta b l e 4 - 5 .
T r oubleshooting Checklist T r oubleshooting 4-9 T able 4-6 Device Setup T roubleshooting P oss ible Causes Instructio n The 6E233-49 SmartSwitch detect a looped conditi on. 1. V e rify th at Span ning Tree is en abled . Refer to the Local Manage ment User’ s Guide for i nstru ctions on setting the type of ST A.
Usi ng t h e RESET B u tton 4-10 T roubleshoot ing 4.3 USING THE RESET BUTTO N The RESET b utton, locate d near the upper plastic locki ng tab of t he module (r efer to Figu re 4-2 ), reset s the 6E233- 49 SmartSwitch proc essor without af fectin g the NVRAM.
Specif ications A-1 A Spe cifica tions This appen dix pro vides operating spe cif ication s for the Cab letron Sys tems 6E233-49 Smar tSwitch Interf ace Module. Cable tron Syst ems reserv es the r ight to ch ange th ese speci ficatio ns at an y time without not ice .
Input/Outp ut P or ts A-2 Specif ications A.4 INPUT/OUTPUT P ORTS 6E233-49 Specifications A.5 COM P ORT PINOUT ASSIGNMENTS The COM port i s a serial co mmunicati ons port that suppor ts Local Ma nagement or con nection to a UPS. Ta b l e A - 1 shows the COM port pin assignments: A.
Optiona l Installati ons and M ode Switc h Bank Setti ngs B-1 B Opti ona l In st al lat ions and Mode Swit ch Bank Settings This appe ndix cov ers the follo wing items: • Required tools ( Section B.1 ) • Locatio ns, functions, and settings for the m ode switches ( Sectio n B.
Setting th e Mode Swi tches B-2 Optiona l Instal lations a nd Mode Sw itch Ban k Setting s Figure B-1 M odule Mode Switch Lo cation/Component La yout Switch de fi nitions and posi tions are as fo llo ws: • Switches 1 through 4 – For Cabl etron S ystems use o nly .
SIMM Upgrade Option al Instal lations and Mode S witch Ba nk Settin gs B-3 • Switch 8 – Reset P assword/Communi ty Strings. Changi ng the positio n of this switch clears only the user-ent ered pass words stored i n NVRAM , and r estores the default passw ords.
SI MM Up g rad e B-4 Optiona l Instal lations a nd Mode Sw itch Ban k Setting s B.3.2 Installing th e DRAM SIMM T o install a DRAM SIMM, ref er to Figure B-3 and proceed as f ollow s: 1. With the SIMM ali gnment n otch orie nted as shown in Figure B-3 , insert the SIMM down between t he conn ector te eth.
Installi ng Optional High Speed I nterface Modules Option al Instal lations and Mode S witch Ba nk Settin gs B-5 B.4 INSTALLING OPTIONAL HIGH SPEED INTERFACE MODULES Figure B- 4 sho ws the locat ion of the connec t or for an opti onal High Spe ed Interfac e Module (HSIM) .
.
Index-1 Inde x Numerics 10BA SE-T requirem ents 2-1 C Cable specifications 100BASE- T network 2-1 COM port pin as s ignm ents A-2 Connect ing to the netwo rk 3-5 D Documents, related xvii E Enviro nme.
Index-2 T Troubleshoo ting 4-1 checklist 4-5 U Unpacking 3-1 V VLAN Redirect F u nction, intr oductio n to 1-5.
Een belangrijk punt na aankoop van elk apparaat Cabletron Systems 6000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cabletron Systems 6000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cabletron Systems 6000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cabletron Systems 6000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cabletron Systems 6000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cabletron Systems 6000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cabletron Systems 6000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cabletron Systems 6000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
