Gebruiksaanwijzing /service van het product 9E138-36b van de fabrikant Cabletron Systems
Ga naar pagina of 36
SmartSwitch 9000 9E132-15, 9E133-36 9E138-12 & 9E138-36 User’s Guide 9031173-02.
.
i Notice Notice Cabletron Systems r eserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletr on Systems to determine whether any such changes have been made.
Notice ii FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesir ed operation.
iii Notice DECLARA TION OF CONFORMITY ADDENDUM Application of Council Directi ve(s): 89/336/EEC 73/23/EEC Manufacturer’ s Name: Cabletron Systems, Inc. Manufacturer’ s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representati ve Name: Mr.
Notice iv.
v Contents Contents Chapter 1 Intr oduction Features........................................................................................................................... 1-1 Related Manuals .......................................................
Contents vi Appendix A EPIMs EPIM-T ........................................................................................................................... A-1 EPIM-F1 and EPIM-F2 ...................................................................
1-1 Chapter 1 Intr oduction The 9E132-15, 9E133-36, 9E138-12, and 9E138-36 MicroLAN™ Switch Modules, shown in Figure 1-1, ar e four channel Ethernet bridges and routers.
Introduction 1-2 The 9E138-36 provides 12 ST -type multi-mode fiber optic connections for each of the three channels, for a total of 36 connections. All ports function as repeaters for incoming data which r etime and retransmit all packets.
1-3 Introduction Figure 1-1. The Ethernet MicroLan Switc h Modules SMB CPU FNB ETHERNET 9E132-15 1 1 23 2 3 4 5 E T H E R N E T 1 2X 3X 4X 5X E T H E R N E T 2 2X 3X 4X 5X E T H E R N E T 3 2X 3X 4X 5.
Introduction 1-4 Related Manuals The manuals listed below should be used to supplement the procedur es and technical data contained in this manual. SmartSwitch 9000 Installation Guide SmartSwitch 9000.
2-1 Chapter 2 Installing the Modules The SmartSwitch 9000 module may be installed into any of the 14 slots that a r e available. T o install, follow the steps below: 1 .
Installing the Modules 2-2 Figure 2-1. Installing the Module Metal Back-Panel Module Guides Module Jack for ESD Wrist Strap Plastic Tab W arning: Ensure that the circuit card is between the card guides. Lock do wn the top and bottom plastic tabs at the same time, applying e ven pressure.
2-3 Installing the Modules Installing EPIMs This section contains procedur es on how to add/replace an Ethernet Port MicroLAN Module (EPIM). After installing the EPIM, refer to Appendix A to verify proper EPIM operation.
Installing the Modules 2-4 Installing the EPIM T o install an EPIM: 1. Remove the coverplate or the EPIM (whichever applies). 2. Slide your new EPIM into place, making sure the connectors on the r ear of the module and inside the HUB attach properly .
2-5 Installing the Modules The Reset Switch The Reset switch is located on the front panel, under the top plastic tab, as shown in Figure 2-4. (Under the right-side tab on the 9E138-36.) It serves two functions: • Pressing the Reset switch twice within thr ee seconds causes the processor (i960) to reset.
Installing the Modules 2-6 User -Accessible Components Figure 2-5 shows the various components that ar e accessible to the user . These consist of an eight-position dip switch (explained in the next section), replaceable PROMs and sockets for RAM. These will be used for future upgrades.
2-7 Installing the Modules Setting the Module Car d DIP Switch An eight-switch DIP switch is located on the module car d, as shown in Figure 2-5 and Figure 2-6.
Installing the Modules 2-8 See the Cautions at the end of this table. T able 2-2. Function of DIP Switch Switch Function Description 8 Clear Password 1 When toggled, this switch clears user-enter ed passwords stor ed in NVRAM and restor es the default passwords.
3-1 Chapter 3 Operation The Ethernet MicroLan Switch Modules pr ovide connectivity between four interfaces: the three fr ont panel Ethernet and the FDDI rings on the backplane (FNB-1 or FNB-2). SmartSwitch 9000 modules connect to either the Internal Network Bus (INB) or the Flexible Network Bus (FNB) bus.
Operation 3-2 Fle xible Netw ork Bus (FNB) The FNB consists of two dual FDDI networks, the FNB-1 and FNB-2, providing up to 400 Mbps of data bandwidth. These FDDI networks are 100% ANSI FDDI- compliant, supporting SMT (version 7.3), MAC, PHY , and PMD standards.
3-3 Operation System Diagnostic Contr oller This diagnostic controller is composed of a Z-80 micr oprocessor and its supporting logic. The diagnostic controller is designed to contr ol the power-up se.
Operation 3-4 i960 Core The i960 core in the FNB module serves two major functions: it pr ovides the packet forwarding logic and performs all network management services. FNB modules can be configured to r un as layer 2 bridges, layer 3 routers, or as Fast Packet Switches.
4-1 Chapter 4 LANVIEW LEDs The front panel LANVIEW LEDs, shown in Figur e 4-1, indicate the status of the module and may be used as an aid in troubleshooting.
LANVIEW LEDs 4-2 The functions of the System Management Bus (SMB) and CPU LEDs are listed in T able 4-1. The function of the FNB Receive LED is listed in T able 4-2. The function of the FNB T ransmit LED is listed in T able 4-3. T able 4-1. SMB and CPU LEDs LED Color State Description Green Functional Fully operational.
4-3 LANVIEW LEDs The functions of the Ethernet Receive LEDs are listed in T able 4-4. The functions of the Ethernet T ransmit LEDs are listed in T able 4-5.
LANVIEW LEDs 4-4.
5-1 Chapter 5 Specifications Safety This equipment meets the following safety requir ements: • UL 1950 • CSA C22.2 No. 950 • EN 60950 • IEC 950 • EMI Requirements of FCC Part 15 Class A •.
Specifications 5-2 Ph ysical Dimensions All except 9E138-36: 35.0 D x 44.0 H x 3.0 W centimeters (13.8 D x 17.4 H x 1.2 W inches) 9E138-36: 35.0 D x 44.0 H x 6.0 W centimeters (13.8D x 17.4H x 2.4W inches) W eight All except 9E138-36: Unit: 1.36 kg. (3 lb) Shipping: 1.
A-1 Appendix A EPIMs The 9E132-15 MicroLAN Switch Extension Module pr ovides one port per channel for Cabletron Systems EPIMs. EPIMs allow connecting to the 9E132-15 using differ ent media types. Cabletron Systems of fers a variety of EPIMs whose specifications are explained in the following sections.
EPIMs A-2 Figure A-1. EPIM-T Pinouts EPIM-F1 and EPIM-F2 The EPIM-F1 and EPIM-F2 support Multimode Fiber Optic cabling. Each EPIM has an internal Cabletron Systems FOT-F™ Fiber Optic Transceiver. The EPIM-F1 is equipped with SMA Connectors and the EPIM-F2 is equipped with ST Connectors.
A-3 EPIM-F3 T ransmitter power parameters are listed T able A-2. EPIM-F3 The EPIM-F3 supports Single Mode Fiber Optic cabling. It has an internal Cabletron Systems FOT-F™ Fiber Optic Transceiver and is equipped with ST Connectors. Figure A-3 shows the EPIM-F3.
EPIMs A-4 Figure A-3. EPIM-F3 T able A-3. EPIM-F3 Specifications Parameter T ypical Minimum Maximum T ransmitter Peak W ave Length 1300 nm 1270 nm 1330 nm Spectral W idth 60 nm - 100 nm Rise T ime 3.0 nsec 2.7 nsec 5.0 nsec Fall T ime 2.5 nsec 2.2 nsec 5.
A-5 EPIM-C EPIM-C The EPIM-C supports thin-net coaxial cabling and is equipped with an internal Cabletron Systems TMS-3™ Transceiver. Y ou can use the TERM switch on the front of the EPIM-C to set the internal 50-ohm terminator . This eliminates the need to connect the port to a tee-connector and terminator .
EPIMs A-6 The AUI Cable must not exceed 50 meters in length. If 28 A WG thin office dr op AUI cable is used, then the maximum cable length is limited to 15.24 meters. Figure A-5. The EPIM-A and EPIM-X T able A-4 lists the DB-15 pinouts. T able A-4. DB-15 Pinouts Pin Number Represents Pin Number Represents 1 Logic Ref.
Een belangrijk punt na aankoop van elk apparaat Cabletron Systems 9E138-36b (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cabletron Systems 9E138-36b heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cabletron Systems 9E138-36b vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cabletron Systems 9E138-36b leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cabletron Systems 9E138-36b krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cabletron Systems 9E138-36b bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cabletron Systems 9E138-36b kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cabletron Systems 9E138-36b . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
