Gebruiksaanwijzing /service van het product C4080I van de fabrikant Canon
Ga naar pagina of 240
Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. Network Guide Network Guide ENG.
.
Color imageRUNNER C5185/C5185i C4580/C4580i C4080/C4080i Network Guide 0 Ot¯.
The manuals for this machine are divide d as follo ws. Please refer to them f or detailed i nf orm ation. The manuals supplied with optional equipme nt are included in the list bel ow . Depending on th e system configuration and product purchased, some manuals may not be needed.
• UFR II Printer Driver Installation and Instruction s UFR II Driver Guide CD-ROM • Mac OS X PS Printer Dri ver Installation and Instruction s Mac PS Driver Guide CD-ROM • Mac OS X UFR II Printe.
Chapter 1 Before Y ou Start Chapter 2 Settings Common to the Network Protocols Chapter 3 Using a TCP/IP Network Chapter 4 Using a NetWare Network (Windows) Chapter 5 Using a NetBIOS Network Chapter 6 .
v Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix How T o Use This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Symbols Used in This Manual .
vi Comm unication En vironment Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Chapter 3 Using a TCP/IP Netwo rk TCP/IP Netwo rk Setup Pr ocedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 Protoco l Settings .
vii UNIX/Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-63 Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-64 F TP Server for imageW ARE Gateway.
viii Windows 98/Me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12 Windows 2000/XP/Server 2003/V ista . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16 Samba (UNIX/Linux) . . . . . . . . . . . . . .
ix Thank y ou f or pur chasing the Canon Color imageR UNNER C5185/C5185i/C4580/C4 580i/ C4080/C4080i. Please read this man ual thoroughly b ef ore oper ating the pro duct to f amiliarize yourself with its capabilities , and to make the most of its man y functions.
x Keys and Buttons Used in This Manual The follo wing symbols and key/b utton names are a f e w e xamples of how ke ys and but tons to be clic ke d or pressed ar e e xpressed in this man ual: • Cont.
xi Abbreviations Used in This Manual In this man ual, product names and mod el names are abbr e viated as f ollows: Microsof t ® Windows ® 98 oper ating syst em: Windows 98 Microsof t ® Windows ® .
xii T rademarks Canon, the Canon logo , imageR UNNER, NetSpot, imageW ARE, MEAP , and the MEAP logo are trademarks of Canon Inc. Adobe, Acrobat , P ostScr ipt, and P ostScript 3 are trademarks of Adobe Systems Incorporated. Apple, Apple T alk, EtherT alk, LocalT alk, Macintosh, Mac OS , and P ow er Macintosh are trade marks of Apple Inc.
xiii Copyright Cop yright 2007 b y Canon Inc. All rights reserved. No par t of this publicat ion ma y be reprod uced or transmit ted in any f or m or by an y means, electron ic or mecha nical, includin g photocopying and reco rding, or by any inf ormation storage or retrie v al system without the prior written per mission of Canon Inc.
xiv.
1-1 CHAPTER 1 Before Y ou Start This chapter describes what you need to know bef ore you start usin g the machine, including the network e nvironments with which the machine is comp atible , and how to check the network environment you are using. Optional Equipment and System Requirements .
Optional Equipment and System Requirements 1-2 1 Before Y ou Start Optional Equipment and System Requirements This section describes the option al equipment and syst em en vironments with wh ich the machine is compatible .
Optional Equipment and System Requirements 1-3 1 Before Y ou Start IMPOR T ANT • The printing function is not a v ailable with Windo ws 98/Me if y ou are using the Color imageR UNNER C5185/C4580/C4080.
Optional Equipment and System Requirements 1-4 1 Before Y ou Start ■ With a TCP/IP Network: • Compatible OS - Microsoft Windows 98 - Microsoft Windows Me - Microsoft Wind ows 2000 Ser ver - Micros.
Optional Equipment and System Requirements 1-5 1 Before Y ou Start • Compatible Protocol - NetBIOS ov er TCP/IP (NetBT) • Compatible Computers - Windows: IBM PC/compatibles - Macintosh: Mac OS X 10.3 or later operating computers/memor y IMPOR T ANT When yo u are using Mac OS X 10.
Optional Equipment and System Requirements 1-6 1 Before Y ou Start ■ With a Server -Based Computing En vironment : • Compatible Windows T er minal Ser ver (Services) - Microsoft Wind ows 2000 Ser ver - Microsoft Wind ows Server 2003 • Compatible Software - Citrix MetaF ram e 1.
Optional Equipment and System Requirements 1-7 1 Before Y ou Star t Sending Data Optional Equipment Requirements Optional equipmen t is not required f or sending data.
Optional Equipment and System Requirements 1-8 1 Before Y ou Star t ■ With a TCP/ IPv4 Network (Using W ebD A V): • Compatible servers - Microsoft Wind ows 2000 Ser v er and IIS 5.0 - Microsoft Wind ows 2000 Prof essional and IIS 5.0 - Microsoft Wind ows XP Prof essional and IIS 5.
Optional Equipment and System Requirements 1-9 1 Before Y ou Star t ■ With a NetW are Network: • Compatible server - Novell NetW are V ersion 3.2/4.
Checking Your Ne twork Environment 1-10 1 Before Y ou Star t Checking Y our Network Environment Ref er to the f ollowing e xamples to confirm the network environm ent that is connected to the machi ne, and t hen perf orm the necessar y operatio ns f or that enviro nment.
Checking Your Ne twork Environment 1-11 1 Before Y ou Star t Sample Macintosh Network In Mac OS 8/9, the AppleT alk (EtherT alk) protocol is used. In Mac OS X, either the AppleT alk (EtherT alk), TCP /IP , or NetBIOS (NetBIOS over TCP/IP) protoc ol can be used.
Checking Your Ne twork Environment 1-12 1 Before Y ou Star t Using a Network with V arious T ypes of Computers If there are v ar ious types of comput ers on the netw ork, the network oper ations y ou are required to perf or m depend on the type of computer s being use d.
2-1 CHAPTER 2 Settings Common to the Network Protocols This chapter describes setting items common to the network protocols, which are require d f or using the machine in a network environment. Before specifying the settings of the desired protocol (Chapters 3 to 6), be sure to set the items explained in this chapter .
Network Environment Setup Procedures 2-2 2 Settings Common to the Network Protocols Network Environment Setup Procedures Bef ore using the machine in a netw ork envir onment, it is necessary to perform the f ollowing set up procedures. 1 Network Cab le Connection (See "Connecting the Ma chine to a Computer or Network," on p.
Connecting the Machine to a Computer or Network 2-3 2 Settings Common to the Network Protocols Connecting the Machine to a Computer or Network The machine can be connected to a computer or net work with a USB cab le or 10Base-T /100Base-TX Ethernet cab le.
Connecting the Machine to a Computer or Network 2-4 2 Settings Common to the Network Protocols CA U TION When connecting the interface cable or ne tw ork ca ble, be sure to obse rve the follo wing precautions to av oid electrical shock. - T urn OFF the ma chine's main power switch before disconn ecting the power cord fr om the po wer outlet.
Connecting the Machine to a Computer or Network 2-5 2 Settings Common to the Network Protocols Connecting to a USB Interface Y ou can connect the ma chine to a computer with a USB port via a USB cabl e. The machine is USB 2.0 Hi-Speed compatible. Th e drivers , and utility that matches the operating system on your computer will be installed.
Connecting the Machine to a Computer or Network 2-6 2 Settings Common to the Network Protocols NO TE • If you c onnect the machin e to a Macintosh via a USB cab le, the Macintosh, if shut do wn, may star t up when the machine star ts up or retur ns from the Sleep mode.
Touch Panel Display Transition 2-7 2 Settings Common to the Network Protocols T ouch Panel Display T ransition The f ollo wing is a flo w diagr am of the touch pan el displa y used in this man ual. Specify the network settings from the Additional Functions scree n displa y ed b y pressing (Additional Fun ctions).
Touch Panel Display Transition 2-8 2 Settings Common to the Network Protocols IMPOR T ANT Settings specified from the control panel beco me eff ectiv e after the machine is restarted, after the procedure. T ur n OFF the machine , wait at lea st 10 seconds, and then turn it ON.
Interface Settings 2-9 2 Settings Common to the Network Protocols Interface Settings This section describes how to specify t he interf ace settings from t he control panel. If y ou are configuring the settings f or the first time, us e the control pan el of the machine.
Interface Settings 2-10 2 Settings Common to the Network Protocols 2 On the Network Settings screen, press [Ethernet Driver Settings] ➞ specify the fo llowing.
Communication Environment Setup 2-11 2 Settings Common to the Network Protocols Communication Environment Setup This section describes how to se t up the en vironment f or communication betw een the machine and computers on y our n etwork. If y ou are config uring the settings f or the first time , use the co ntrol panel of th e machine.
Communication Environment Setup 2-12 2 Settings Common to the Network Protocols IMPOR T ANT • The machine supports the SNMP v . 1 and SNMP v . 3 management functions. Y ou can use them s imultaneously . The [Read Only ]/[Read/Write] functions of SNMP v .
Communication Environment Setup 2-13 2 Settings Common to the Network Protocols 2 Specify the settings f or SNMP v . 3. [On] for <Use SNMP v . 3>: Specify th e user and context according to the following procedures. NO TE An SNMP v . 3 user with the follo wing sett ings is regist ered by default.
Communication Environment Setup 2-14 2 Settings Common to the Network Protocols ● If y ou want to c hange the status of an SNMP v . 3 user: ❑ Press [User Settings] ➞ select the user whose status you w ant to change ➞ press [User On/Off]. ● If you want to edit the context: ❑ Press [Context Settings] ➞ edit the context.
Communication Environment Setup 2-15 2 Settings Common to the Network Protocols 4 On the Network Settings screen, press [Enab le Dedicated Po r t ] ➞ specify the foll owing. [On]: Y ou can set or browse detailed information on the ma chine with a Canon printer driver or utility (UFR II/PCL/PS pr inter drivers, NetSpo t Device Installer , etc.
Communication Environment Setup 2-16 2 Settings Common to the Network Protocols IMPOR T ANT If the optional Color PS Printer Kit is activ ated, tak e note of the f ollowing: - If the print job is sent fr om a Macintosh comp uter to a PS printer , you cann ot specify whether to spool unde r this option.
3-1 CHAPTER 3 Using a TCP/IP Network This chapter descr ibes the settings an d pr ocedures necessar y to connect and use the machine with a TCP/IP networ k. TCP/IP Netw ork Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TCP/IP Network Setup Procedures 3-2 3 Using a TCP/IP Network TCP/IP Network Setup Procedures T o use a TCP/IP network, it is n ecessar y to perf or m the f ollowing procedures . 1 Proto col Settings (See "Pr otoc ol Settings," on p. 3-3.) Specify the protocol settings .
Protocol Settings 3-3 3 Using a TCP/IP Network Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Protocol Settings 3-4 3 Using a TCP/IP Network 1 On the TCP/IP Settings screen, press [IPv4 Settings] ➞ [IP Address Settings]. 2 In [IP Address Settings], specify the f ollowing. ● Using a fixed IP ad dress: ❑ [DHCP], [RARP], and [BOO TP]: [Off] Enter the appropriate values in [IP Address], [Subnet Mask], and [Gateway Address].
Protocol Settings 3-5 3 Using a TCP/IP Network NO TE • If the machine is restarted after DHCP , BOO T P , or RARP settings are specified, the TCP/IP Settings screen displa ys the IP address setting v alues ob tained from the DHCP , BOO TP , or RARP server .
Protocol Settings 3-6 3 Using a TCP/IP Network 5 On the DNS Settings screen, press [DNS Host Name/Domai n Name Settings] ➞ in <IPv4>, specify the follo wing. Enter the name of the ma chine as [Host Name], and the network domain name of the machine as [Domain Name].
Protocol Settings 3-7 3 Using a TCP/IP Network NO TE • If you ha v e a DHCP server running Windows 2000 Server that uses the DHCP service and want to register the machi ne's DNS record, configure the f ollowing settings in the DHCP ser ver: - In the DHCP server , r ight-click the [Sc ope] icon ➞ click [Proper ties].
Protocol Settings 3-8 3 Using a TCP/IP Network 8 On the TCP/IP Settings screen, press [RA W Print Settings] ➞ specify the f ollowing. Specify the Raw print settings if you are using the Color imageR.
Protocol Settings 3-9 3 Using a TCP/IP Network 10 On the TCP/IP Settings screen, press [FTP Print Settings] ➞ specify the f ollow ing. Specify the F TP print setti ngs if you are using the Color ima.
Protocol Settings 3-10 3 Using a TCP/IP Network Specify the WSD print settin gs if you are using Windows Vista, and the Color imageRUNNER C5185i/C4580i/C4080i, or the Color imageRUNNER C5185/ C4580/C4.
Protocol Settings 3-11 3 Using a TCP/IP Network 13 On the TCP/IP Settings screen, press [IPP Print Settings] ➞ specify the f ollow ing. Specify the IPP print settings if yo u are using the Color ima.
Protocol Settings 3-12 3 Using a TCP/IP Network [On] for <Response>: Y ou can use device infor mation from other devices, such as an Address Book or Department ID Management settings, or respond to a multicast discover y from utilities. Optionally , press [Scope Name] and en ter the scope name for a multicast discover y .
Protocol Settings 3-13 3 Using a TCP/IP Network In the following cases, sp ecify the pr oxy setti ngs, accor ding to the ne twork environment you are using: • If you are using the optional Color PS .
Protocol Settings 3-14 3 Using a TCP/IP Network ● If y ou do not want to restrict the IPv 4 addresses of computers from which data (print/f ax/I-fax job) ca n be sent to the m achine: ❑ <Apply .
Protocol Settings 3-15 3 Using a TCP/IP Network ● If y ou want t o restrict the IPv4 a ddresses of computer s on w hich t he machine set ting items ca n be set or br owsed (using the Remote UI or ut.
Protocol Settings 3-16 3 Using a TCP/IP Network 18 On the TCP/IP Settings screen, press [Receiving MA C Address Settings] ➞ specify the follo wing. [On] for <Apply Settings>: Y ou can enable a MAC address filter . Press [Register] ➞ speci fy the MAC addresses to allow access to.
Protocol Settings 3-17 3 Using a TCP/IP Network IMPOR T ANT • A ke y pair to use f or encrypted SSL communication is required to confirm Depar tment IDs and pass words . Ev en if y ou set [Dept. ID Management P assw ord Confirmation] to 'On', Depar tment IDs and passwo rds cannot be confirmed if the ke y pair is corrupted or in v alid.
Protocol Settings 3-18 3 Using a TCP/IP Network 2 In [PING Command], chec k the f ollo wing. Pressing [Start] after entering the desire d IP address existing on the network displays the result of the PING command on the touch panel displa y . If this result is inappropriate, check t he settings described in "Interfac e Settings," on p.
Protocol Settings 3-19 3 Using a TCP/IP Network TCP/IP Settings (IPv6) The following e xp lains the proced ure f or specifying TC P/IPv6 settings with the control pan el. After spec ifying the TCP/I Pv6 setting s, per f orm the procedure in "Confir ming T CP/IP Settings ( IPv6)," on p.
Protocol Settings 3-20 3 Using a TCP/IP Network 2 In [Use IPv6], specify the fo llowing. [On] for <Use IPv6>: Y ou can use an IPv6 network. A link local address is automatically set. 3 On the IPv6 Settings screen, press [Stateless Ad dress Settings] ➞ specify the fo llowing.
Protocol Settings 3-21 3 Using a TCP/IP Network 4 On the IPv6 Settings screen, press [Man ual Add ress Settings] ➞ specify the f ollowin g. [On] for <Use Manual Address>: Y ou can set the IPv6 address manually . Enter the IPv6 address value in [Manual Address] and the IP v6 address pr efix length in [Prefix Length].
Protocol Settings 3-22 3 Using a TCP/IP Network 6 On the IPv6 Settings screen, press [IP Ad dress Range Settings] ➞ specify the fo llowing. Y ou need to set <RX/Print Range> if you are using t.
Protocol Settings 3-23 3 Using a TCP/IP Network ● If y ou want to rest rict the IPv6 a ddresses of computer s fr om which data (print/fax/I- fax job) can be sent t o the machine: ❑ <Apply Setti.
Protocol Settings 3-24 3 Using a TCP/IP Network IMPOR T ANT • A total of eight (groups) of IPv6 add resses, r anges of IPv6 addresses , or IPv6 address prefix es can be set. • Y ou cannot specify a multicast address or an address compo sed entirely of z eros f or an IPv6 a ddress.
Protocol Settings 3-25 3 Using a TCP/IP Network 8 In <IPv6>, specify the f ollowing. If you want to use dynamic DNS updati ng, enter th e IPv6 address of the DNS server in [Primary DNS Server]. If you do not want to specify a secondar y DNS server , leave [Secondar y DNS Server] blank.
Protocol Settings 3-26 3 Using a TCP/IP Network IMPOR T ANT If you set <Use DHCPv6> to 'On' in step 5, the domain name you set manually will be ov erwritten. 10 On the DNS Settings screen, press [DNS Dynamic Update Settings] ➞ in <IPv6>, specify the follo wing.
Protocol Settings 3-27 3 Using a TCP/IP Network Confirming TCP/IP Settings (IPv6) The f ollo wing is the procedur e f or con firming that the TCP/IPv6 network connections are prope rly set. 1 On the TCP/IP Settings screen, press [IPv6 Settings] ➞ [PING Command].
Protocol Settings 3-28 3 Using a TCP/IP Network IMPOR T ANT • If you set th e star tup time of the mach ine's netwo rk functions by f ollowing the procedure in "Start up Time Settings," on p . 3-43, ex ecute the PING command only after the time set as the star tup time passes.
Protocol Settings 3-29 3 Using a TCP/IP Network 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [Generate Ke y]. 2 Press [Generate SSL Ke y] ➞ specify the follo wing. In [Key Name], enter a name for the key pair ➞ select a key length.
Protocol Settings 3-30 3 Using a TCP/IP Network 3 Press [Next] ➞ set the self-signed server cer tificate. Y ou cannot set an end date which is earlier than the star t date. Set at least one of the following items ➞ press [Start Key Generatn] to generate a key .
Protocol Settings 3-31 3 Using a TCP/IP Network Registering a Key Pair File and Serv er Certificate File Installed from a Computer Y ou can install a k ey pair from a computer in order to use encrypte.
Protocol Settings 3-32 3 Using a TCP/IP Network Editing Key Pairs and Server Certific ates Y ou can co nfir m the set tings of regist ered key pairs and ser ver cer t ificates. Y ou can also erase unnecessary ke y pairs and se r v er cer tificates, an d set the def ault ke y pair .
Protocol Settings 3-33 3 Using a TCP/IP Network ● If y ou want to eras e a registered ke y pair : ❑ Select the k e y pair to era se ➞ press [Erase]. IMPOR T ANT The ke y pair with (def ault) displa y ed to the le ft of it is set as the def ault k ey pair .
Protocol Settings 3-34 3 Using a TCP/IP Network NO TE • The ke y pair with (def ault) displa y ed to the le ft of it is set as the def ault k ey pair . T o change the def ault k ey pair , select a ke y pair which does not ha v e (def ault) displa yed to th e left of it.
Protocol Settings 3-35 3 Using a TCP/IP Network Editing a CA Certificate Y ou can confirm the settings of registered CA certificates. Y ou can also erase unnecessary CA cer tificates. 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [CA Certificate List] ➞ specify the f ollowing.
Protocol Settings 3-36 3 Using a TCP/IP Network Generating and Confirming a Key Pair and Device Signature Certificate and Us er Certificate for Adding Digital Signatures to PDF Files The machine can add the f ollowing tw o types of digital signature s to PDF files.
Protocol Settings 3-37 3 Using a TCP/IP Network 1 On the TCP/IP Settings screen, press [Certificate Settings] ➞ [Generate Ke y]. 2 Press [Generate/Update De vice Signature K ey] ➞ [Y es]. IMPOR T ANT Y ou can register only one k ey pair . NO TE The name of the generated/updated k e y pair is set to 'De vice Signature Ke y'.
Protocol Settings 3-38 3 Using a TCP/IP Network Confirming a Key Pair and Device Certificate The f ollowin g procedure describes how to confirm a ke y pair and de vice cer tificate generat ed/updated in "Set ting a K e y P air and De vice Cer tificate," on p .
Protocol Settings 3-39 3 Using a TCP/IP Network Confirming a Key Pair and User Certificate The f ollo wing procedure describes how the system manager can confirm the ke y pairs and user cer tificates f or all users. Install the key pair and user cer tifica te used for adding a user signature to PDF files from a comput er .
Protocol Settings 3-40 3 Using a TCP/IP Network If [Certifi cate V erifi cation] is grayed out or <The key is corrupted or invalid.> is displayed, you cannot use the key pair . After erasing the corrupted or invalid key pair , install a new key pair and user cer tificate from a computer .
Protocol Settings 3-41 3 Using a TCP/IP Network ● If y ou want to rece ive e-mail/I -faxes usi ng the machi ne's o wn SMTP receiving function: ❑ Register the host name of the machine with the DNS ser ver ➞ specify the f ollowing. Press [On] for <SMTP Receipt> ➞ press [Off] for <POP>.
Protocol Settings 3-42 3 Using a TCP/IP Network IMPOR T ANT • If the POP ser ver does not suppo r t SSL encr yption, data is not encrypted when [On] is selected for <Allow SSL (POP)>. • In order to sel ect [On] f or <Allow SSL (POP )> to allo w SSL tr ansmiss ion, it is necessary to generate a ke y pair in adv ance.
Protocol Settings 3-43 3 Using a TCP/IP Network IMPOR T ANT If the SMTP host does not support encr ypti on, data is not encr ypted when [On] is selected f or <Allow SSL (SMTP Send)>.
Setting Up a Computer for Printing/Sendin g a Fax 3-44 3 Using a TCP/IP Network Setting Up a Computer for Printing/Sending a Fax After y ou hav e completed the protocol settings f or printing and sending a f ax with the machine , y ou are ready t o set up each of the comp uters f or pr inting or sending a f ax.
Setting Up a Computer fo r Printing/Sending a Fax 3-45 3 Using a TCP/IP Network IMPOR T ANT • Optional equipment is required to print or s end a fax from a computer . For the equipment needed, see "Optional Equipment and System Requirements," on p .
Setting Up a Computer for Printing/Sendin g a Fax 3-46 3 Using a TCP/IP Network Printer Connection Method (LPD/Raw) Windows 98/Me ■ Installing a New Driv er 1 Install the driver .
Setting Up a Computer fo r Printing/Sending a Fax 3-47 3 Using a TCP/IP Network IMPOR T ANT If you use LPD , enter one of the f ollowing in [L PR Queue Name] in the [Add P or t] dialog bo x of Canon LPR2: -L P The machine prints according to its spool settings .
Setting Up a Computer for Printing/Sendin g a Fax 3-48 3 Using a TCP/IP Network NO TE • The print application will be LPD and the print queue will be set to <L P> if the driver has been installed according to the abov e procedures . • This machine enab les you to specify print queues other than <LP>.
Setting Up a Computer fo r Printing/Sending a Fax 3-49 3 Using a TCP/IP Network 2 In the printer properties dialog bo x of the printer y ou installed, select the [P or ts] sheet ➞ clic k [Add P ort]. 3 In the [Printer P or ts] dialog bo x, fr om [A vailab le ports types], select [Standar d TCP/IP P ort] ➞ clic k [Ne w P or t].
Setting Up a Computer for Printing/Sendin g a Fax 3-50 3 Using a TCP/IP Network 5 In the printer pr operties dialog box, cl ic k [Configure P ort] ➞ select [LPR] or [Raw]. If you use LPD, you can specify one of the followin g print queues i n [Queue Name].
Setting Up a Computer fo r Printing/Sending a Fax 3-51 3 Using a TCP/IP Network Mac OS X 1 Install the driver . Install the driver according to the instructions in the ma nual for each driver . • If you want to use the UFR II printer driver See the Mac UFR II Driver Guide .
Setting Up a Computer for Printing/Sendin g a Fax 3-52 3 Using a TCP/IP Network NO TE • The admintool utility is included with the ope rating system . Fo r specific oper ating instructions, see the operating s ystem manua l. • Y ou can specify one of the f ollowing p rint queues.
Setting Up a Computer fo r Printing/Sending a Fax 3-53 3 Using a TCP/IP Network 2 After installing Canon LPR2, restart the computer . For instructions on how to install Canon LPR2 and set po rts, see th e Canon LPR2 User's Guide (PDF manual).
Setting Up a Computer for Printing/Sendin g a Fax 3-54 3 Using a TCP/IP Network Windows 2000/XP/S erver 2003/Vista If y ou are using Windows 2000/XP/Server 2003, you can also se t IPP b y installing Canon LPR2. Canon LPR2 enab les y ou to set po r ts easily .
Setting Up a Computer fo r Printing/Sending a Fax 3-55 3 Using a TCP/IP Network 3 Select the option f or locating the printer on th e Internet or on y our intranet ➞ enter the URL of y our printer . If you want to use r egular IPP printi ng, enter the following URL in [URL].
Setting Up a Computer for Printing/Sendin g a Fax 3-56 3 Using a TCP/IP Network Printer Connection Method (F TP) The f ollowin g procedure describes how to perf or m pr inting b y using FTP . 1 Go to the MS-DOS pr ompt or the command prompt ➞ log in to the machine's FTP server .
Setting Up a Computer fo r Printing/Sending a Fax 3-57 3 Using a TCP/IP Network Printer Connection Method (WSD) The f ollowin g procedure describes how to perf or m pr inting with WSD when using Windows Vista. If a dialog bo x is displa y ed while yo u are perf or ming this procedure, ent er a user name and pass word.
Setting Up a Computer as a File Server 3-58 3 Using a TCP/IP Network Setting Up a Computer as a File Ser ver T o send data from the mach ine to a computer o n your network , you need to specif y the setting s of the com puter for receiving data .
Setting Up a Computer as a File Server 3-59 3 Using a TCP/IP Network F TP Ser ver Settings Windows 2000/XP/Server 2003/Vista This section descr ibes the proc edures for using the de f ault home dir ector y unde r [Def ault FTP Site]. T o use other settings, enter t he FTP site and home directory by ref erring to the IIS docum entation.
Setting Up a Computer as a File Server 3-60 3 Using a TCP/IP Network 3 In the [Default FTP Site Pr oper ties] dialog bo x, on the [Home Directory] sheet, select both [Read] and [Write]. 4 Right-clic k [My Computer] ➞ c lic k [Pr operties] to open the [System Prope rties] dialog box ➞ confirm [Full computer name].
Setting Up a Computer as a File Server 3-61 3 Using a TCP/IP Network 5 Right-clic k [My Computer] ➞ c lic k [Manage] to open the [Computer Management] window ➞ under [System T ools], in [Local Users and Gr oups], right-c lic k the [Users] f older ➞ clic k [New User].
Setting Up a Computer as a File Server 3-62 3 Using a TCP/IP Network 7 Set a recipient ad dress using the contr ol panel. Sample recipient setting: • Server side settings: • The machine's rec.
Setting Up a Computer as a File Server 3-63 3 Using a TCP/IP Network UNIX/Linux F or more inf or mation on the system requirements f or using a UNIX/Linu x computer as an FTP server , see "System Requirements" in "Sending Data," on p .
Setting Up a Computer as a File Server 3-64 3 Using a TCP/IP Network IMPOR T ANT • T o use the host name of the abo v e e xample f or [Host Name], it is necessary to use a DNS server . (This applies e ven if the machine and the FTP server are in the same subnet.
Setting Up a Computer as a File Server 3-65 3 Using a TCP/IP Network 6 Set a recipient ad dress using the contr ol panel. Sample recipient setting: • Server side settings (set using the above proced.
Setting Up a Computer as a File Server 3-66 3 Using a TCP/IP Network F TP Ser ver for imageWARE Gateway An FTP ser v er f or image W ARE Gatewa y is required f or receiving data fro m the machine, whe n used with imageW ARE Gatewa y . 1 Set up the FTP server fo r imageW ARE Gate wa y ➞ specify the folder to store data sent fr om the mac hine.
Setting Up a Computer as a File Server 3-67 3 Using a TCP/IP Network W ebDA V Ser ver Settings The W ebD A V sending function is a function f or sending sca nned image files , image files f or receive.
Setting Up a Computer as a File Server 3-68 3 Using a TCP/IP Network 2 Create a virtual directory . ❑ Star t IIS ➞ from the IIS snap-in, select the Web site to add a director y to. ❑ On the [ Action] menu, point to [New] ➞ select [Vir tual Director y].
Setting Up a Computer as a File Server 3-69 3 Using a TCP/IP Network • The machine's address settings: IMPOR T ANT • Up to 128 alphanumeric characters ca n be entered f or [Host Name] on the control panel. Also , up to 255 alphanumeric characters can be entered f or [Folder P a th].
Setting Up a Computer as a File Server 3-70 3 Using a TCP/IP Network Apache for Windows 2000/ 2000 Ser ver/XP/Server 2003/UNIX/Linux/ Mac OS X The f ollowin g procedures describe ho w to create the &q.
Setting Up a Computer as a File Server 3-71 3 Using a TCP/IP Network ❑ Specify the ser ver name. Directive to be changed: • Before change #ServerName localho st:80 • After change #ServerName localho st:80 ServerName Apache-Serv er .ccm.canon.co.
Setting Up a Computer as a File Server 3-72 3 Using a TCP/IP Network • The machine's address settings: IMPOR T ANT • Up to 128 alphanumeric charac ters can be entered f or [Host Name] on the control panel. Also , up to 255 alphanumeric char acters can be entered f or [Fo lder P ath].
4-1 CHAPTER 4 Using a NetW are Network (Windows) This chapter descr ibes settings and proced ures for using the machine with a NetW are network. NetW are Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NetWare Network Setup Procedures 4-2 4 Using a NetW are Network (Windows) NetW are Network Setup Procedures T o use a NetW are netwo rk, it is necessar y to perf orm the f ollowi ng procedures . 1 NetW are Print Service Settings (See "NetWa re Print Service Sett ings," on p.
NetWare Print Service Settings 4-3 4 Using a NetW are Network (Windows) NetW are Print Ser vice Settings T o pr int using a NetW are network, you need t o specify print ser vice settings, including print server and q ueue settings . Y ou can use the softwa re listed belo w to specify the print ser vice set tings from your comp uter .
NetWare Print Service Settings 4-4 4 Using a NetW are Network (Windows) ■ Queue Server Mode and Remote Printer Mode The machine suppor ts both the queue ser ver mode and the remote printe r mode.
NetWare Print Service Settings 4-5 4 Using a NetW are Network (Windows) ❑ If you are using the remote printer m ode, select [P aralle l] from [T ype] ➞ clic k [Communication] to open the [P arallel Communication] dialog box. Select [LPT1] fr om [Port], and [Manual load] under [Connection type].
NetWare Print Service Settings 4-6 4 Using a NetW are Network (Windows) ❑ Enter the name of th e queue y ou are set ting up ➞ press [ENTER] on the ke yboard. ❑ Select the name of the queue you specified ➞ press [ENTER] on the keyboard. ❑ Select [Queue Ser vers] ➞ press [ENTER ] on the keyboard.
NetWare Print Service Settings 4-7 4 Using a NetW are Network (Windows) ❑ Select the queue you set up in step 3 ➞ press [ENTER] on the keyboard. 7 Press [ESC] on the ke yboar d repeatedl y until y ou return to the [Exit PCONSOLE] window ➞ select [Y es] to quit PCONSOLE.
Protocol Settings 4-8 4 Using a NetW are Network (Windows) Protocol Settings This section describes how to sp ecify the protocol settings f or the machine using the control panel. If you ar e configuring the settings f or the first time, use the control panel of the mach ine.
Protocol Settings 4-9 4 Using a NetW are Network (Windows) 2 Press [Settings] ➞ specify the print service details. Specify the same tree, context, file se rver , and print server names that you specified in "NetWar e Print Service Se ttings," on p.
Protocol Settings 4-10 4 Using a NetW are Network (Windows) ❑ Press [Log In] ➞ in the Enter Network Pass word screen, enter the name and passw ord of a user to whom the browse right is granted. If the browse rig ht is limited to the spec ific user , it is necessar y to log in to NetW are as a user to whom the browse right is granted.
Protocol Settings 4-11 4 Using a NetW are Network (Windows) ● Setting Bindery PServer or RPrinter using the ke yboar d on t he touch panel displa y: ❑ In [File Ser v er], enter the name of the file ser ver to which the desired print ser ver belongs ➞ in [Pr int Ser ver], enter the name of the desired print ser ver .
Setting Up a Computer for Printing/Sendin g a Fax 4-12 4 Using a NetW are Network (Windows) Setting Up a Computer for Printing/Sending a Fax After y ou ha v e completed spe cifying the NetW are print ser vice settings and printer protocol settings , y ou are ready to set up each of the computers f or printing or sending a f ax.
Setting Up a Computer as a File Server 4-13 4 Using a NetW are Network (Windows) Setting Up a Computer as a File Ser ver T o send data from the m achine to a computer o n your network , you need to specif y the setting s of the com puter for receiving data .
Setting Up a Computer as a File Server 4-14 4 Using a NetW are Network (Windows) 3 Set a recipient ad dress fr om the contr ol panel. There are two methods for specifying the re cipient address; selec.
Setting Up a Computer as a File Server 4-15 4 Using a NetW are Network (Windows) • Example 2 If "SALES_US" cont ain s the user accou nt "john" • Example 3 If "SALES" .
Setting Up a Computer as a File Server 4-16 4 Using a NetW are Network (Windows) IMPOR T ANT • If you w ant to use [Browse ] to specify each item, mak e sure you pres s [Browse] after the e xpiration of the time specified in "Startup Time Settings ," on p .
5-1 CHAPTER 5 Using a NetBIOS Network This chapter descr ibes settings and proced ures for using the machine with a NetBIOS network. NetBIOS Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Protocol Settings.
NetBIOS Network Setup Procedures 5-2 5 Using a NetBIOS Network NetBIOS Network Setup Procedures T o use a NetBIOS network, it is necessary to perf orm the f ollowing p rocedures. 1 Proto col Settings (See "Pr otoc ol Settings," on p. 5-3.) Specify the protocol settings .
Protocol Settings 5-3 5 Using a NetBIOS Network Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Protocol Settings 5-4 5 Using a NetBIOS Network 1 On the Netwo rk Settings screen, press [SMB Server Settings] ➞ specify the f ollowin g. [On] for <Use SMB Server>: Y ou can use th e SMB server . In [Server], enter the name of a compute r that the machine conn ects to, using the keyboard on the touch panel display .
Protocol Settings 5-5 5 Using a NetBIOS Network 2 On the TCP/IP Settings screen, press [WINS Configuration] ➞ specify the f ollow ing. [On] for <WINS Resolution>: Y ou can resolve the name with WINS. Enter the IPv4 address of a WINS server in [WINS Server Address].
Setting Up a Computer for Printing/Sendin g a Fax 5-6 5 Using a NetBIOS Network Setting Up a Computer for Printing/Sending a Fax After you hav e completed the pr otocol setting s, y ou are ready t o set up each of the computers f o r printing or sending a f ax.
Setting Up a Computer fo r Printing/Sending a Fax 5-7 5 Using a NetBIOS Network Windows 98/Me The f ollo wing is the procedure f or specifying a NetBIOS network with Windows 98/ Me.
Setting Up a Computer for Printing/Sendin g a Fax 5-8 5 Using a NetBIOS Network Windows 2000/XP/S erver 2003/Vista The f ollo wing is the p rocedure f or specifying a NetBIOS netw ork with Windows 2000/XP/Server 2003/Vista . In the f ollo wing procedur es, ite ms displa y ed on the screens f or Windows 2000 are used.
Setting Up a Computer fo r Printing/Sending a Fax 5-9 5 Using a NetBIOS Network Printer Connection Method Windows If Windo ws 2000/XP/Server 20 03/Vista is on y our netw ork, the f ollo wing procedure enab les you t o set up a print server f or more efficient management of net work printers.
Setting Up a Computer for Printing/Sendin g a Fax 5-10 5 Using a NetBIOS Network 2 Install the driver . Install the driver according to the follo wing procedures indicated in the manual for each driver . (The UFR II printe r driv er is not available for Windows 98/Me.
Setting Up a Computer as a File Server 5-11 5 Using a NetBIOS Network Setting Up a Computer as a File Ser ver T o send data from the m achine to a computer o n your network , you need to specif y the setting s of the com puter for receiving data. Y o u can send data over a NetBIOS network to a Windo ws or Samba (UNIX/Lin ux) shared f older .
Setting Up a Computer as a File Server 5-12 5 Using a NetBIOS Network Connecting to a NetBIOS Ne twork and Configuring a Shared Folder Windows 98/Me If a suitab le Windows 200 0/XP/Server 2003/ Vista .
Setting Up a Computer as a File Server 5-13 5 Using a NetBIOS Network 3 On the [Access Contr ol] sheet, select the le vel of access contr ol. If you select [User -level access contr ol], specify a domain in which a list of users and groups is saved. 4 On the [Identification] sheet, confirm the compu ter name.
Setting Up a Computer as a File Server 5-14 5 Using a NetBIOS Network 5 Open the pr operties dialog box of the f older y ou want to share ➞ on the [Sharing] sheet, clic k [Share As] ➞ enter the share name in [Share Name].
Setting Up a Computer as a File Server 5-15 5 Using a NetBIOS Network • The machine's recipient settings: IMPOR T ANT • If you w ant to use [Browse ] to specify each item, mak e sure y ou press [Brow se] after the e xpiration of the time specified in "Startup Time Settings," on p .
Setting Up a Computer as a File Server 5-16 5 Using a NetBIOS Network Windows 2000/XP/S erver 2003/Vista It is recommended that the file server be configure d by th e network administr ator . The number of users or clients that can access a server running Win dows 2 000/XP/ Ser ve r 2003/Vista is limited.
Setting Up a Computer as a File Server 5-17 5 Using a NetBIOS Network 4 Restart the computer if prompted. 5 Confirm the computer name. If you are using Windows 2000, right-click the [My Computer] icon ➞ click [Manage] to open the [Co mputer Management] window .
Setting Up a Computer as a File Server 5-18 5 Using a NetBIOS Network 6 Right-clic k the [My Computer] icon ➞ c lic k [Manage] to open the [Computer Management] windo w ➞ under [System T ools], in [Local User s and Gr oups], fr om the [User s] f older , c lic k [New User].
Setting Up a Computer as a File Server 5-19 5 Using a NetBIOS Network NO TE In an Activ e Director y environmen t, the pr ocedures f or setting up users differ from the above .
Setting Up a Computer as a File Server 5-20 5 Using a NetBIOS Network ❑ Click [P er missions] to display the dialog box. Select or add the users or groups to whom you want to give access to the shared folder ➞ under [Permissions], select both [Change] and [Re ad].
Setting Up a Computer as a File Server 5-21 5 Using a NetBIOS Network Sample recipient setting: • Server side settings (set and confirmed in the above step.
Setting Up a Computer as a File Server 5-22 5 Using a NetBIOS Network NO TE • Y ou can send data using the follo wing f orm ats. A DNS server is required f or the latter c ase: 192.
Setting Up a Computer as a File Server 5-23 5 Using a NetBIOS Network • The machine's recipient settings: For a sample screen, see the example of Windows 2000/XP /Server 2003/Vista screen (see p.
Setting Up a Computer as a File Server 5-24 5 Using a NetBIOS Network.
6-1 CHAPTER 6 Using an AppleT alk Network (Macintosh) This chapter descr ibes settings and proced ures for printing via an AppleT alk network . AppleT alk Network Setup Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AppleTalk Network Setup Procedures 6-2 6 Using an AppleT alk Network (Macintosh) AppleT alk Network Setup Procedures T o pr int via an AppleT alk network, it is necessary to perf orm the follo wing procedures .
Protocol Settings 6-3 6 Using an AppleT alk Network (Macintosh) Protocol Settings This section describes how to specify t he protocol settings f or the machine using the control panel. If y ou are co nfiguring the settings f or the fir st time , use the control panel of the mach ine.
Setting Up a Computer for Printing 6-4 6 Using an AppleT alk Network (Macintosh) Setting Up a Computer for Printing After y ou ha v e completed th e machine protoco l settings, install the printer driver on the Macintosh that will do the printing, an d then make the settings f or the pr int destination.
7-1 CHAPTER 7 T roubleshooting This chapter describes how to resolve printing problems. Network Connection Problems and Remedies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Printing Problems and Rem edies . . . . . . . . . . .
Network Connection Problems and Remedies 7-2 7 T roubleshooting Network Connection Problems and Remedies This section describes the causes of netw ork connection prob lems , and ho w to resolv e them. Unable to Set up a Network Cause [Change Settings/D isplay Conn ection Confirm.
Network Connection Pr oblems and Remedies 7-3 7 T roubleshooting Remedy Check the f ollowing: • If the dial-up router does not hav e to send pack ets via broadcast, change the router setting s to ensure that it send s pack ets via a method other than broadcast.
Printing Problems and Remedies 7-4 7 T roubleshooting Printing Problems and Remedies This section describes how to re solve basic printing problems. Unable to Install a Driver (TCP/IP Netw ork) Cause .
Printing Problems and Remedies 7-5 7 T roubleshooting Remedy Check the f ollowing: • Confirm that the IPv4 addresse s are proper ly set up . If the IPv4 addresses were set using DHCP , BOO TP , or RARP , confirm that they are operating. • Confirm that the IPv6 addresse s are proper ly set up.
Printing Problems and Remedies 7-6 7 T roubleshooting Cause 6 The IP address of the computer from wh ich data (print/fax/I-f ax job) is to be sent to the machine is not per mitted by the settings f or <RX/Print Rang> in [IP Address Range Settings] on the IPv4 or IPv6 Settings screen.
Printing Problems and Remedies 7-7 7 T roubleshooting • Confirm th at the correct printer is se t as the ou tput destination for the computer that is printi ng.
Printing Problems and Remedies 7-8 7 T roubleshooting Cause 4 The IPv4 address of the computer from which data (print/fax/I-f ax job) is to be sent to the machin e is not permitted by the settings f or <RX/Pr int Range> in [IP Address Range Settings] on the IPv4 Settings screen.
Printing Problems and Remedies 7-9 7 T roubleshooting • Confirm that the proper pr inter ha s been selected as the destination. • Confirm that [AppleT alk] is active. • Confir m that the AppleT alk connecti on method is EtherT alk or Ether net. Cause 4 An error message is displa yed on the touch panel display of the machine.
Data Sending/File Sharing Problems and Remedies 7-10 7 T roubleshooting Data Sending/File Sharing Problems and Remedies This section describes how to re solv e data sending/file sharing problems . Unable to Send Data/Share Files (FT P) Cause 1 The FTP server is not set correctly .
Data Sending/File Sharing Problems and Remedies 7-11 7 T roubleshooting Cause 3 The machine was turned OFF while sending data to the FTP ser ver , and when the machine was tur ned back ON, it attempted to resend the data. (If a Windows 2000/XP/Server 2003/Vista FTP ser ver is being used.
Data Sending/File Sharing Problems and Remedies 7-12 7 T roubleshooting • Star t the NW ADMIN f or this server . If [Root] is display ed at the upper left cor ner of the screen, th e lay er below it is the conte xt. If [Root] is not display ed, go to the [View] men u ➞ click [Go Up a Lev el] to change to the displa y below [Root].
Data Sending/File Sharing Problems and Remedies 7-13 7 T roubleshooting <Check the server .> is display ed when you try to use a WebD A V server . Cause The W ebD A V ser ver is unav ailable . Remedy Confirm the status of the WebD A V server . <TCP/IP error> is displa yed when you try to send to a W ebD A V ser ver .
Data Sending/File Sharing Problems and Remedies 7-14 7 T roubleshooting Cause 2 The pro xy ser ver does not suppor t SSL encr ypted communica tion. Remedy If the W ebD A V client is connected to the Internet via a proxy ser ver , set the pro xy ser ver to use SSL.
Data Sending/File Sharing Problems and Remedies 7-15 7 T roubleshooting • Confirm the proxy server settings (see st ep 16 in "TCP/IP Settings (IPv4)," on p . 3-3.) Cause 2 Access to the destination was denied. Remedy Check the settings of the W ebD A V server .
Encrypted SSL Data Communication Problems and Remedies 7-16 7 T roubleshooting Encr ypted SSL Data Communication Problems and Remedies This section describes how to re solv e encrypted SSL data communication prob lems. <The defa ult ke y is not set.
Encrypted SSL Data Communication Problems and Remedies 7-17 7 T roubleshooting <Cannot register beca use the algori thm of this key is not suppor ted.> is display ed when you tr y to register a key pair file. Cause Y ou are tr ying to register a key pair file which uses the DSA algorithm.
Encrypted SSL Data Communication Problems and Remedies 7-18 7 T roubleshooting <Digital sig. cer t. access err .> is display ed. Cause 1 Access to the user cer tificate wa s denied when sending a PDF with a user signature.
8-1 CHAPTER 8 Appendix This chapter includes the network settin g s, specifications , glossary , and inde x. Network Setting Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Confirming Settings .
Network Setting Items 8-2 8 Appendix Network Setting Items If y ou are configuring the settings f or the f irst time in "Interf ace Settings," on p . 2-9 and "TCP/IP Settings (IPv4), " on p . 3-3 or "TCP/IP Settings (IPv6)," on p .
Network Setting Items 8-3 8 Appendix ■ TCP/IP Settings *1 This item is av ailab le only if y ou are using the Color imageR UNNER C5185i/C4580i/C4080i, or the Color imageR UNNER C5185/C4580/C4080 wit.
Network Setting Items 8-4 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery IPv6 Settings: Use IPv6 Use IPv6 O n/Off Off N/A IPv6 Settings: State.
Network Setting Items 8-5 8 Appendix *1 This item is av ailab le only if y ou are using the Color imageR UNNER C5185i/C4580i/C4080i, or the Color imageR UNNER C5185/C4580/C4080 with the f ollowing opt.
Network Setting Items 8-6 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery DNS Settings: DNS Host Name/Dom ain Name Settings: IPv4 Host Name 47 .
Network Setting Items 8-7 8 Appendix *1 This item is av ailab le only if y ou are using the Color imageR UNNER C5185i/C4580i/C4080i, or the Color imageR UNNER C5185/C4580/C4080 with the f ollowing opt.
Network Setting Items 8-8 8 Appendix *1 This item is av ailab le only if you are using the Color imageR UNNER C5185i/C45 80i/C4080i, or the Color imageR UNNER C5185/C4580/C408 0 with the follo wing op.
Network Setting Items 8-9 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Multicast Discov er y Response On/Off On Scope Name Scope name to be .
Network Setting Items 8-10 8 Appendix *3 [Genera te/Update De vice Signatur e K e y] is enab led if t he Univer sal Send PDF Security Fea ture Set is activat ed by registering a license k e y . *4 [K ey and Cer tificate List f or Users] is enab led if the optional Digit al User Signature PDF Kit is activ ated b y registering a license ke y .
Network Setting Items 8-11 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Cer tificate Settings: CA Cer tificate List Cer tificate Detai ls V .
Network Setting Items 8-12 8 Appendix *5 This item is ava ilable only if the optional Color PS Printe r Kit or the optional W eb Access Software is activ ated b y registering a license k e y .
Network Setting Items 8-13 8 Appendix *1 This item is av ailab le only if y ou are using the Color imageR UNNER C5185i/C4580i/C4080i, or the Color imageR UNNER C5185/C4580/C4080 with the f ollowing op.
Network Setting Items 8-14 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Binder y PSer ver Settings Print Ser ver 47 Characters maximum (NULL.
Network Setting Items 8-15 8 Appendix Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery NDS PSer ver Settings Print Ser ver 64 Characters maximum (NULL) N/A.
Network Setting Items 8-16 8 Appendix ■ AppleT alk Settings* 1 *1 This item is av ailab le only if you are using the Color imageR UNNER C5185i/C45 80i/C4080i, or the Color imageR UNNER C5185/C4580/C4080 with t he optional Color UFR II/PCL Printer Kit or the optional Color PS Printer Kit.
Network Setting Items 8-17 8 Appendix ■ SNMP Settings Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Get Printer Mgmt Info from Host On/Off Off Use SNMP v .
Network Setting Items 8-18 8 Appendix ■ Enable Dedicated P or t Settings ■ Spool Settings* 1 *1 This item is av ailab le only if you are using the the Color imageR UNNER C5185i/C4580i/C4080i , or .
Network Setting Items 8-19 8 Appendix ■ E-Mail/I-Fax Settings Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery SMTP Receipt On/Off On POP On/Off On SMTP .
Network Setting Items 8-20 8 Appendix NO TE Use the control panel of the de vice to set it ems which cannot be set using the Remote UI. Item Setting Description Default Setting Can be set in Remot e UI Device Information Delivery Au thent.
Confirming Settings 8-21 8 Appendix Confirming Settings Y ou can pr int a u ser's data list to confir m th e networ k settings m ade from th e machine's touch panel displa y .
Confirming Settings 8-22 8 Appendix 11/06/2006 MON 17:10 iR C5185 002 ..
Confirming Settings 8-23 8 Appendix 11/06/2006 MON 17:10 iR C5185 003 ..
Viewing the Network Access Log 8-24 8 Appendix Viewing the Network Access Log This machine lo gs attempts to gain acc ess from IP ad dresses tha t it has bee n set to reject.
Obtaining the Public Key of the Machine to Use SSL with Window s Vista 8-25 8 Appendix Obtaining the Public Key of the Machine to Use SSL with Windows Vista If you w ant to use IPPS printing, it is necessar y to obtain the public ke y of the machine and install it in Windows Vi sta by f ollowing the procedure below .
Obtaining the Public Key of the Machine to Use SSL with Windows Vista 8-26 8 Appendix 10 If y ou deselected [Enable Pr otected Mode (requires restarting Internet Explorer)] in step 5, select it again.
Specifications 8-27 8 Appendix Specifications Specifications are subject to change without no tice. Hardware Specifications Software Specifications *1 IPv6 is not supported.
Glossary 8-28 8 Appendix Glossar y Numerics 10Base-T The Etherne t standard suppor tin g data transf er rates up to 10 Mbps, which utilizes a twisted-pair cable. 100Base-TX The Ether net standard suppor t ing data transfer rates up to 100 Mbps, which utilizes two pairs of high-grade twisted-pair cab les.
Glossary 8-29 8 Appendix Aut o R e d i a l When A uto Redial is set to 'On', the ma chine automatically redials the recipient's f acsimile number if the line is busy , or if there is a se nding error . The machine will wait two minutes (def ault) after the initial attempt bef ore redialing.
Glossary 8-30 8 Appendix CMYK Cyan (C), Magenta (M), Y ellow (Y) and Blac k (K). CMYK is the standard color model used f or offset printing of full-color docum ents, using the secondar y colors of light (plus blac k). CMYK is a subtractiv e proces s, which subtracts reflected colors from white.
Glossary 8-31 8 Appendix CSV Comma Separated V alue file. An ASCII te xt file commonly used to store the v alues held in a table. In the CSV file, commas are used to separate the values of the various columns in the original ta ble , whereas each new line in the CSV file indicates a new row in the original table.
Glossary 8-32 8 Appendix DNS Domain Name System. The system that a ssociates the IP address assigned to a computer with the domain name. DNS server Domain Name System ser ver . A ser ver wh ich maintains a database that translates the doma in names of Internet servers , such as www .
Glossary 8-33 8 Appendix F File f ormats File formats are used to sav e image data. This machine suppor ts six different file f ormats, TIFF , JPEG, PDF , PDF (Compact), PDF (OCR), and PDF (T race).
Glossary 8-34 8 Appendix Gatewa y Address The default address of a network or Web site . It provides a single d omain name and point of entr y to the site. H HP-GL/2 A graphics language that enables computer applications to draw graphic images using printe rs.
Glossary 8-35 8 Appendix Internet Pr otoco l (IP) The underlying set of networking rules tha t describes how data is transmitted across the Inter net. Inter net Protocol enables data from one computer to be split into pack ets, and sent to another comp uter with a spec ific IP address.
Glossary 8-36 8 Appendix K Key p ai r In SSL security , the key pair consists of a public ke y and a private ke y . A p ublic k ey is known to "e v eryone," and a private or secret key , is known only to the recipient of the message. L LAA Locally Administered Addr ess.
Glossary 8-37 8 Appendix LPR2 A Canon software utility that realizes netw ork pr inting on TCP/IP networks when using the LPR, RA W , or IPP print protoc ol. Built into the print archite cture of Win dows , Canon LPR2 enables network users to easily specify por t settings for network printi ng.
Glossary 8-38 8 Appendix NDPS Nov ell Distributed Print Ser vices. A printin g system de veloped b y Nov e ll, f or managing pr inters in a networ k environment. NetBEUI NetBIOS Enhanced User Interface . NetBEUI is a network protocol or iginally design ed by IBM, and later e xtended b y Microsoft and Nov ell.
Glossary 8-39 8 Appendix O OS/2 A f amily of multitasking operating systems dev eloped b y IBM f or Intel x86-based computers. OS/2 pro vides a graphical user interf ace similar to Windows, as we ll as a command line interface similar to DOS . Add-ons to OS/2 enable it to run DOS and Windows applications.
Glossary 8-40 8 Appendix PDF P or table Document F ormat. The page description languag e used in Adobe Systems' Acrobat document exchange system, which is restricted neither by de vice nor resolution.
Glossary 8-41 8 Appendix Protoc ol A set of rules that govern the transmissi on of data across a network. Examples of protocols are FTP , D HCP , BOO TP , RARP , IPP , TCP/IP , and LD AP . Pro xy server A ser ver that includes a function for accessing remote ser vers in place of clients on the local network.
Glossary 8-42 8 Appendix Remote UI Remote User Interface . The Remote UI is softw are that enables y ou to perform operations, which are usually performed on the ma chine's control panel , using a Web browser (such as Netscape Navigator/Communicator or Microsoft Inter net Explorer) ov er a network.
Glossary 8-43 8 Appendix S Scanning Area The area actually scanned is slightly smal le r than the size of the ori ginal document. Therefore , words or images near the edges of the d ocument ma y not be scanned. As a result, make sure that there is some ma rgin space on all sides o f the document you are sending.
Glossary 8-44 8 Appendix SNMP v . 1 Used f or read only access when used in c onjunction with SNMP v . 3 f or setting MIB Access P er mission lev els. Can be set to [R ead/Write] if securi ty is not necessar y . SNMP v . 3 Management functi ons of SNMPv .
Glossary 8-45 8 Appendix Subaddress Subaddress is the globa l telecommunications standard specified by the ITU-T (Inter national T elecommunication Un ion-T elecommunication Standardization Se ctor).
Glossary 8-46 8 Appendix T TCP/IP T ransmission Control Protocol/Inter net Protoc ol . The protocol used to connect to the Inter net and wide area network s. T elephone Line T ype Depending on the type of phone line that you hav e, set the machine to touch tone (T) or pulse (P) dialing.
Glossary 8-47 8 Appendix Ultra Fine A resolution mode fo r sending or iginals at 16 dots/mm x 15.4 lines/mm (eight times the standard resolution ). If the receiving fa x machine does not suppor t this mode, the original is automatically sent in the Super Fine or Fi ne mode.
Glossary 8-48 8 Appendix X X.509 (DER) X.509 is a standard for digital k e y cer tificate s defined by the ITU (Internati onal T elecommunications Union). DER (Distinguished Encoding Rules) is a bina ry encoding format for digital key data. Y YCbCr YCbCr is a color space used in video systems.
Index 8-49 8 Appendix Index Numerics 10Base-T , 2-4, 8-28 100Base-TX, 2-4, 8-28 A Activity Repor t, 8-28 Add P o r t, 3-47 ADF, 8-28 Allow SSL (POP), 8-20 Allow SSL (SMTP Receiv e), 8-20 Allow SSL (SM.
Index 8-50 8 Appendix Erase, 8-11 Canon Dr iver Inf o rmation Assist Ser vice, 8-29 CCITT/ITU-T, 8-29 Cer tificate Settings, 8- 9, 8-10 CA Cer tificate List, 8-11 Generate K ey, 8-9 K ey and Cert ific.
Index 8-51 8 Appendix Domain, 8-32 Domain Name , 3-6, 8-6 dpi, 8-32 E ECM, 8-32 E-mail Address, 8-19 E-Mail/I-F ax Settings, 8-19 E-mail Address, 8-19 POP, 8-19 POP Address, 8-19 POP Inter val, 8-19 P.
Index 8-52 8 Appendix Setting a ke y pair and de vice cer tificate, 3-36 Get Printer Mgmt Info from Host, 8-17 H Host Name, 3-6, 8 -6 HP-GL/2, 8- 34 HTTP, 3-44, 8-34 I I-f ax, 8-34 imageP ASS, 8-34 im.
Index 8-53 8 Appendix Editing CA cer tifi cate, 3-35 Editing ke y pairs and ser ver certificate, 3-32 Generating k ey pair and server certi ficate, 3-28 Registering CA cer tificate file installed from.
Index 8-54 8 Appendix NetW are server, 1-12 NetW are Settings, 4-8, 8-13 F rame T ype , 8-13 IPX Exter nal Network Numbe r, 8-13 NetW are, 8-13 Node Number, 8-13 P ac ket Signature, 8-13 Print Ser vic.
Index 8-55 8 Appendix Spool, 3-50, 3-52 Print Ser ver, 8-14 Print ser ver name, 4-9 Print Ser ver P assw ord, 8-14 Print Ser vice, 4-8, 8-13 Binder y PSer ver, 4-8 Binder y remote pr inter mode (RPrinter), 4-8 NDS PSer ver, 4- 8 NDS remote printer mode (NPr inter), 4-8 Printer connection method for NetBIOS network, 5-9 Mac OS X 10.
Index 8-56 8 Appendix Response, 8-9 RGB, 8-42 RIP, 8-42 Rotar y Pulse, 8-42 RPrinter, 4-4, 4-8 RPrinter Settings, 8-14 File Ser ver, 8-14 Print Ser ver, 8-14 Printer Number, 8-14 RX, 8-42 RX P ass wor.
Index 8-57 8 Appendix User Settings, 8-17 SNMP v . 1, 8-44 SNMP v . 3, 8-44 SNTP, 8-7, 8-44 SNTP Settings, 8-7 NTP Server Address, 8-7 NTP Server Check, 8-7 P olling Interval, 8-7 Use SNTP, 8-7 Solari.
Index 8-58 8 Appendix Subnet Mask, 3-4, 8-3 Use HTTP, 3-12, 8-12 Use Multicast Discov er y, 8-8 Use P ASV Mode for FTP, 8-8 Use Proxy, 8-12 Use Pro xy within the Same Domain, 3-13, 8-12 Use WSD, 8-8 U.
Index 8-59 8 Appendix W W atermar k, 8-47 W ebD A V, 1-8, 8-47 W ebD A V ser ver, 8-47 W ebD A V server settings, 3-67 Apache for Windo ws 2000/2000 Ser ver/XP/ Ser ver 2003/UNIX/Linux/Mac OS X, 3-70 .
Index 8-60 8 Appendix.
.
USRM1-1074-03 © CANON INC. 2007 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.
Een belangrijk punt na aankoop van elk apparaat Canon C4080I (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon C4080I heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon C4080I vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon C4080I leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon C4080I krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon C4080I bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon C4080I kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon C4080I . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
