Gebruiksaanwijzing /service van het product FAX-L290 van de fabrikant Canon
Ga naar pagina of 229
HT1-2194-000-V.1.0 PRINTED IN CHINA XXXXXXXX.
ii Pref ace Copyright Cop yright © 2002 by Canon, Inc. All rights reser ved. No part of this publication ma y be reproduced, transmitted, transcribed, stored in a retriev al system, or tr anslated in.
Pref ace iii Super G3 is a phrase used to describe the new gener ation of f ax units that use ITU-T V .34 standard 33.6 Kbps* modems. Super G3 High Speed F ax units allow transmission time of appro ximately three seconds* per page which results in reduced telephone line charges.
iv Pref ace Contents Chapter 1: Introduction T ype Con ventions Used in This Guide ...................................................................1-2 Customer Suppor t ...............................................................................
Pref ace v Chapter 5: Paper Handling P aper Requirements ..............................................................................................5-2 Printable Area .................................................................................
vi Pref ace Chapter 8: Receiving Faxes Receiving Methods ................................................................................................8-2 Receiving F axes A utomatically: F AX ONL Y MODE ...........................................8-3 Setting F AX ONL Y MODE.
Pref ace vii Chapter 10: Copying Documents Y ou Can Cop y ...................................................................................10-2 Making Copies ...........................................................................................
viii Pref ace Chapter 14: Summary of Settings Understanding the Menu System ........................................................................14-2 Printing a List to Check the Current Settings ..................................................14-2 Accessing the Menus .
Pref ace ix Appendix D: Options Optional Handset ..................................................................................................D-2 P ackage Contents ..................................................................................
x Pref ace.
Chapter 1 Introduction 1-1 Introduction Chapter 1 Intr oduction T ype Conventions Used in This Guide ...................................................1-2 Customer Support ..............................................................................
1-2 Introduction Chapter 1 T ype Conventions Used in This Guide Please read the list below of symbols , terms, and abbre viations used in this guide. c Cautions tell you ho w to avoid actions that could injure y ou or damage your F AX. In order to use y our unit safely , always observe these cautions.
Chapter 1 Introduction 1-3 Introduction In addition, this guide uses distinctiv e typef aces to identify buttons and inf or mation in the LCD: • The buttons you press appear in this typef ace: Stop . • Inf ormation in the LCD appears in this typeface: USER SETTINGS .
1-4 Introduction Chapter 1 Impor tant Safety Instructions Read these saf ety instructions thoroughly before using y our F AX. c Except as specifically described in this guide, do not attempt to service the F AX your self.
Chapter 1 Introduction 1-5 Introduction • Unplug the F AX from the wall outlet and contact y our local author ised Canon dealer or the Canon help line in any of the f ollowing cases: – When the pow er cord or plug is damaged or fra yed. – If liquid has spilled into the unit.
1-6 Introduction Chapter 1 • Do not stack bo xes or furniture around the power outlet. K eep the area free so you can reach the outlet quickly . If you notice an ything unusual (smoke , strange odours, noises) around the F AX, unplug the unit immediately .
Chapter 2 Setting Up 2-1 Setting Up Chapter 2 Setting Up Unpacking the F AX ...................................................................................2-2 Removing Shipping Materials ............................................................
2-2 Setting Up Chapter 2 Unpacking the F AX Bef ore unpacking y our F AX, be sure to choose a suitable location f or it ( 1 p . 1-5). Carefully remov e all items from the box. Y ou should ha ve someone help y ou hold the bo x while you lift out the F AX and its protective pac kaging.
Chapter 2 Setting Up 2-3 Setting Up If any items are damaged or missing, notify y our local author ised Canon dealer or the Canon help line immediately . n • Impor tant! Sa ve y our sales receipt for proof of purchase in case your unit requires warranty service.
2-4 Setting Up Chapter 2 Removing Shipping Materials F ollow this procedure to remo v e the shipping materials. K eep them in case you need to transpor t the unit in the future . n The actual shipping materials may diff er in shape, quantity , and position from the ones shown abo ve .
Chapter 2 Setting Up 2-5 Setting Up Assembling the F AX F ollow this procedure to assemb le your F AX: n F or details on attaching the optional handset to your F AX, see Appendix D . 1 Attach the paper loading warning label to the left of the multi-purpose tray.
2-6 Setting Up Chapter 2 Making Connections Connecting the T elephone Line Cor d and Exter nal Devices Y our F AX has three jacks on the side for connection of the following: • T elephone line cord .
Chapter 2 Setting Up 2-7 Setting Up n • Canon cannot guarantee that all ans wer ing machines will be compatib le with your unit, due to varying specifications. • If you ha ve connected an e xter nal de vice to your F AX, be sure to set the correct receive mode ( 1 Chapter 8).
2-8 Setting Up Chapter 2 Connecting the Power Cor d Bef ore connecting the pow er cord, see P ower Supply , p . 1-6. F ollow this procedure to connect the po wer cord: The F AX has no power s witch, so its power is on as long as it is plugged in. Once connected, though, the unit still needs time to warm up before y ou can use it.
Chapter 2 Setting Up 2-9 Setting Up Setting the Language and Countr y* When you connect the po wer cord to an AC outlet f or the first time, y ou need to select the language f or the LCD displa y . For some countries, y ou also need to select the countr y where y ou are using the F AX machine.
2-10 Setting Up Chapter 2 6 Press Set . The F AX enters standby mode . Ex: Once you ha ve selected the language and country , these setting menus will not appear ne xt time you connect the po wer cord. n • T o check the settings made b y the countr y selection, you can print the USER ’ S D A T A LIST ( 1 p .
Chapter 2 Setting Up 2-11 Setting Up Main Components of the F AX SUPPORT TRA YS MUL TI-PURPOSE TRA Y COVER ADF (AUTOMA TIC DOCUMENT FEEDER) DOCUMENT GUIDES OPERA TION P ANEL P APER DELIVERY SELECTOR D.
2-12 Setting Up Chapter 2 Operation Panel The language used f or the Operation P anel varies depending on the countr y of purchase. The f ollowing illustration sho ws the Operation P anel in English.
Chapter 2 Setting Up 2-13 Setting Up Installing the T oner Car tridge This section describes how to install the toner car tridge in the F AX for the v er y first time. If you are replacing a used toner car tridge, see p . 12-7. Bef ore installing the toner car tridge, be sure to read the f ollowing: • Use only FX-3 toner car tridges in your F AX.
2-14 Setting Up Chapter 2 F ollow this procedure to install the toner cartr idge in the F AX: 1 Make sure the F AX is plugged in. 2 Lift the latch and open the front cov er . c Do not open the front co ver without lifting the latch since this may dama ge your unit.
Chapter 2 Setting Up 2-15 Setting Up 5 Place and suppor t the toner car tridge on a flat, clean surf ace, then gently pull on the plastic tab to remov e the plastic seal.
2-16 Setting Up Chapter 2 Loading Paper This section e xplains how to load plain paper in the m ulti-pur pose tra y . F or complete details on paper requirements and selecting paper f or your F AX, see Chapter 5. Bef ore loading paper , be sure to read the f ollowing: c The laser printing process uses high temperatures to fuse toner to the paper .
Chapter 2 Setting Up 2-17 Setting Up F ollow this procedure to load a stac k (maximum 10 mm stack height) of A4-siz e plain paper in the multi-purpose tray: 1 Remov e the multi-pur pose tra y cov er from the F AX. 2 Prepare a stack of paper b y tapping it on a flat surf ace to e v en its edges.
2-18 Setting Up Chapter 2 5 Replace the multi-purpose tray co ver . • Be sure to replace this cov er to prev ent dust accumulating inside the unit. 6 Adjust the paper delivery selector if necessar y ( 1 p .
Chapter 3 Registering Information 3-1 Registering Information Chapter 3 Registering Infor mation Guidelines for Entering Number s, Letter s, and Symbols .....................3-2 Correcting a Mistake.....................................................
3-2 Registering Information Chapter 3 Guidelines for Entering Numbers, Letters, and Symbols When you come to a step that requires y ou to enter a name or number , refer to the table belo w to deter mi.
Chapter 3 Registering Information 3-3 Registering Information ■ Changing Between Number and Letter Modes Press T to select n umber mode ( :1 ), uppercase letter mode ( :A ), or low ercase letter mode ( :a ).
3-4 Registering Information Chapter 3 ■ Entering Numbers 1 Press T to s witch to number mode ( :1 ). 2 Press the numeric button that contains Ex: the number y ou want. • T o enter a space, press Space . 3 Continue entering other numbers using Ex: the numeric buttons .
Chapter 3 Registering Information 3-5 Registering Information Registering Sender Infor mation What is Sender Information? When you receiv e a fax, the name of the person or compan y who sent you the f ax, their f ax/telephone number , and the date and time of transmission may be printed in small type at the top of each page.
3-6 Registering Information Chapter 3 Entering the Date and Time F ollow this procedure to set the current date and time: 1 Open the one-touch speed dial panel. 2 Press Data Registration . 3 Press Set three times . • The date and time currently set f or your F AX are display ed.
Chapter 3 Registering Information 3-7 Registering Information 4 Use ∂ or ¨ to select UNIT TELEPHONE # . 5 Press Set . Ex: 6 Use the numeric buttons to enter y our Ex: f ax/telephone number (max. 20 digits, including spaces). • T o enter a space, press Space .
3-8 Registering Information Chapter 3 Setting the T elephone Line T ype Bef ore using your F AX, make sure it is set f or the telephone line type of your telephone system. If you are unsure of y our telephone line type, check with y our local telephone company .
Chapter 3 Registering Information 3-9 Registering Information Dialling Thr ough a Switchboard A PBX (Private Branch Exchange) is an on-site telephone s witchboard. If your F AX is connected through a PBX or other telephone s witching system, you ha ve to dial the outside line access number first, and then the number of the party you are calling.
3-10 Registering Information Chapter 3 ■ If you selected HOOKING in step 8: 9 Press Set . 10 Press Stop to return to standby mode . Ex: ■ If you selected PREFIX in step 8: 9 Press Set . 10 Use the numeric buttons to enter the Ex: outside line access number (max.
Chapter 3 Registering Information 3-11 Registering Information Setting the Summer Time* Some countries adopt the summer time system that shifts the clock time ahead or bac k according to the change in seasons.
3-12 Registering Information Chapter 3 ■ If you selected ON in step 8: 9 Press Set three times . Ex: 10 Use ∂ or ¨ to select the month Ex: in which the summer time star ts. 11 Press Set twice . Ex: 12 Use ∂ or ¨ to select the week Ex: in which the summer time star ts.
Chapter 3 Registering Information 3-13 Registering Information 17 Press Set three times . Ex: 18 Use ∂ or ¨ and Set to select the month, week, da y of the week, and time when the summer time ends, as in steps 10 to 16 f or the BEGIN DA TE/TIME settings.
3-14 Registering Information Chapter 3.
Chapter 4 Document Handling 4-1 Document Handling Chapter 4 Document Handling Document Requirements .........................................................................4-2 Scanned Area of a Document ...............................................
4-2 Document Handling Chapter 4 Document Requir ements The documents you load in the ADF f or sending and cop ying must meet the f ollowing requirements: One-page document Multipage document of the same thickness and weight Size Max. 216 mm × Approx.
Chapter 4 Document Handling 4-3 Document Handling Loading Documents F ollow this procedure to load documents in the ADF: 1 Adjust the document guides to the width of the document. 2 Gently inser t the top of the document, f ace down, in the ADF until y ou hear a beep .
4-4 Document Handling Chapter 4 Adding Pages to the Document in the ADF If you need to add pages to y our document in the ADF , wait until the last page star ts f eeding, then load up to 30 additional pages (10 legal size). The last and first page should ov er lap b y about 2.
Chapter 5 P aper Handling 5-1 P aper Handling Chapter 5 Paper Handling P aper Requirements .................................................................................5-2 Printable Area ............................................................
Paper Requir ements Y ou can load the follo wing paper in the multi-pur pose tra y: Once you ha ve decided which paper y ou want to load, be sure to do the f ollowing: • Check that y our paper is compatible with the F AX ( 1 p.
Chapter 5 P aper Handling 5-3 P aper Handling Printable Ar ea The shaded area shows the printable area of A4-size paper . Selecting Paper for Y our F AX F ollow these guidelines when selecting paper: .
5-4 P aper Handling Chapter 5 Selecting Face-Up or Face-Down Paper Deliver y ■ Paper Path Understanding how paper f eeds through the F AX will help you determine which paper deliv er y slot is appropriate f or the task you are perf or ming.
Chapter 5 P aper Handling 5-5 P aper Handling ■ Selecting Paper Delivery Bef ore selecting paper deliv er y , be sure to take note of the f ollowing: • Alwa ys set the paper delivery selector before printing ( 1 below). • Changing paper delivery while the unit is printing will cause problems.
5-6 P aper Handling Chapter 5 n Y ou can also use f ace-up delivery when cop ying or receiving a large number of pages. In this case, place the F AX near the edge of a table so that the pages can f all aw a y from the unit and av oid blocking the f ace-up delivery slot.
Chapter 5 P aper Handling 5-7 P aper Handling Changing the Paper Size Setting The multi-purpose tray is f actor y-set f or loading A4-size paper . If you want to load a diff erent paper size ( 1 p . 5-2), follo w this procedure to change the paper size setting: 1 Open the one-touch speed dial panel.
5-8 P aper Handling Chapter 5 10 Use ∂ or ¨ to select the custom paper size setting. • Y ou can select from the f ollowing: – CUSTOM1/LONG (Def ault) – CUSTOM2/SHORT • F or details on the paper sizes abov e, see p . 5-2. 11 Press Set . 12 Press Stop to return to standby mode .
Chapter 5 P aper Handling 5-9 P aper Handling Adjusting the T oner Saver Setting By enabling the toner sa ver setting, y ou can reduce toner consumption of the toner car tridge by appro ximately 30% to 40%. This will e xtend the toner car tridge life .
5-10 P aper Handling Chapter 5.
Chapter 6 Speed Dialling 6-1 Speed Dialling Chapter 6 Speed Dialling What is Speed Dialling? ...........................................................................6-2 Speed Dialling Methods ........................................................
6-2 Speed Dialling Chapter 6 What is Speed Dialling? Instead of having to dial a f ax or telephone number using regular dialling (i.e. with the numeric buttons), y ou can simplify the dialling procedure by registering the f ax/telephone number f or speed dialling.
Chapter 6 Speed Dialling 6-3 Speed Dialling Registering One-T ouch Speed Dialling By registering a fax/telephone n umber under a one-touch speed dialling button, y ou can simplify dialling of that number to the press of a single b utton.
6-4 Speed Dialling Chapter 6 7 Use the numeric buttons to enter the Ex: f ax/telephone number y ou want to register (max. 120 digits, including spaces and pauses). • T o enter a space, press Space . Spaces are optional and are ignored during dialling.
Chapter 6 Speed Dialling 6-5 Speed Dialling 11 This completes the basic one-touch speed dialling settings. T o continue registering other one- Ex: touch speed dialling buttons , press Data Registration and repeat the procedure from step 5. -or- T o end registering one-touch speed Ex: dialling buttons , press Stop to retur n to standby mode .
6-6 Speed Dialling Chapter 6 ■ If you selected REGULAR TX in step 15: 16 Press Set . Ex: 17 Press Stop to return to standby mode . Ex: ■ If you selected PSWD/SUBADDRESS in step 15: The other par ty ’ s f ax machine ma y require an ITU-T standard subaddress and/or pass word to receiv e fax es.
Chapter 6 Speed Dialling 6-7 Speed Dialling 20 Press Set . Ex: 21 T o continue registering other one- touch speed dialling buttons , repeat the procedure from step 5. -or- Press Stop to return to standby mode . Ex: n • Use the destination labels provided with y our F AX to label the one-touch speed dialling buttons .
6-8 Speed Dialling Chapter 6 Registering Coded Speed Dialling By registering a fax/telephone n umber under a coded speed dialling code, y ou can simplify dialling of that number to pressing Coded Dial and entering the registered two- digit code.
Chapter 6 Speed Dialling 6-9 Speed Dialling 8 Press Set twice . Ex: 9 Use the numeric buttons to enter the Ex: f ax/telephone number y ou want to register (max. 120 digits, including spaces and pauses). • T o enter a space, press Space . Spaces are optional and are ignored during dialling.
6-10 Speed Dialling Chapter 6 12 Press Set . 13 This completes the basic coded speed dialling settings. T o continue registering other coded Ex: speed dialling codes, press Data Registration and repeat the procedure from step 7. -or- T o end registering coded speed Ex: dialling codes, press Stop to return to standby mode .
Chapter 6 Speed Dialling 6-11 Speed Dialling ■ If you selected REGULAR TX in step 17: 18 Press Set . Ex: 19 Press Stop to return to standby mode . Ex: ■ If you selected PSWD/SUBADDRESS in step 17: The other par ty ’ s f ax machine ma y require an ITU-T standard subaddress and/or pass word to receiv e fax es.
6-12 Speed Dialling Chapter 6 22 Press Set . Ex: 23 T o continue registering other coded speed dialling codes, repeat the procedure from step 7. -or- Press Stop to return to standby mode . Ex: n T o check y our entr ies, y ou can pr int a list of all the numbers and names registered f or coded speed dialling ( 1 p .
Chapter 6 Speed Dialling 6-13 Speed Dialling Registering Gr oup Dialling If you frequently send documents to the same g roup of f ax numbers , you can “ gro up ” these numbers under a one-touch speed dialling b utton or coded speed dialling code. Y ou can then send to all the fax n umbers in the group in one quic k and simple operation.
6-14 Speed Dialling Chapter 6 ❚ T o register a group under a coded speed dialling code: Press Coded Dial , then use the Ex: numeric buttons to enter the coded speed dialling code ( 00 to 99 ) under which you w ant to register the group . • If a coded speed dialling code has already been registered, CODED SPEED or GROUP DIAL appears.
Chapter 6 Speed Dialling 6-15 Speed Dialling • T o add fax n umbers to a previously registered group , simply enter them as e xplained in this step . • If you enter the wrong destination, or if you w ant to delete a destination already registered in a group , use ∂ or ¨ to select that entr y , then press Clear .
6-16 Speed Dialling Chapter 6 Using Speed Dialling Once you ha ve registered f ax/telephone numbers for one-touch speed dialling ( 1 p . 6-3), coded speed dialling ( 1 p . 6-8), or group dialling ( 1 p . 6-13), you can begin to send documents or make telephone calls with speed dialling.
Chapter 6 Speed Dialling 6-17 Speed Dialling Making a T elephone Call With Speed Dialling F ollow this procedure to dial a telephone n umber registered f or one-touch or coded speed dialling on your F AX: 1 Make sure y ou hav e connected the optional handset or a telephone to the F AX ( 1 p .
6-18 Speed Dialling Chapter 6 Printing Speed Dialling Lists T o chec k the f ax/telephone numbers and names registered f or speed dialling, you can print the speed dialling lists. Y ou may w ant to keep these lists near your F AX to refer to them when dialling.
Chapter 6 Speed Dialling 6-19 Speed Dialling ■ 1-TOUCH SPD DIAL LIST 1 ■ 1-TOUCH SPD DIAL LIST 2 (Detailed List) T 1 # 1 T 1 # 1.
6-20 Speed Dialling Chapter 6 ■ CODED SPEED DIAL LIST 1 ■ CODED SPEED DIAL LIST 2 (Detailed List) A A A A A A A A A A A A T 1 # 1 A A A A A A A A A A A A T 1 # 1.
Chapter 6 Speed Dialling 6-21 Speed Dialling ■ GROUP DIAL LIST.
6-22 Speed Dialling Chapter 6.
Chapter 7 Sending F axes 7-1 Sending Fax es Chapter 7 Sending Faxes Preparing to Send a Fax ..........................................................................7-2 Documents Y ou Can F ax .........................................................
7-2 Sending F axes Chapter 7 Pr eparing to Send a Fax Documents Y ou Can Fax F or inf ormation on the types of documents you can f ax, their requirements, and details on loading documents, see Chapter 4. Setting the Scanning Resolution Y ou can set the scanning resolution of documents you send.
Chapter 7 Sending F axes 7-3 Sending Fax es Setting the Scanning Contrast Y ou can adjust the degree of contrast at which y our document is scanned f or sending and cop ying.
7-4 Sending F axes Chapter 7 Dialling Methods There are se v eral wa ys of dialling the fax n umber(s) you want to send to . The y are as f ollows: • Regular Dialling Dial a f ax number b y using the numeric buttons , similar to dialling a telephone number .
Chapter 7 Sending F axes 7-5 Sending Fax es Sending Methods This section e xplains the two main sending methods: Memor y sending and Manual sending via the handset .
7-6 Sending F axes Chapter 7 3 Press Start/Copy to begin scanning f or sending, or if you used speed dialling, wait a f ew seconds f or the F AX to begin scanning automatically . • If you do not w ant the F AX to begin scanning automatically after a f ew seconds, disab le the TIME OUT setting ( 1 p .
Chapter 7 Sending F axes 7-7 Sending Fax es 4 Dial the other par ty ’ s f ax/telephone number . Ex: • F or dialling methods, see p . 7-4. • If you mak e a mistake during dialling, press Hook or hang up the handset and star t again from step 3.
7-8 Sending F axes Chapter 7 Cancelling Sending F ollow this procedure if y ou want to stop sending a document bef ore transmission is completed: ■ If you are sending a document using manual sending via the handset: 1 Press Stop . • The transmission is cancelled.
Chapter 7 Sending F axes 7-9 Sending Fax es Redialling When the Line is Busy There are two methods of redialling: Manual redialling and Automatic redialling . This section e xplains these two methods . Manual Redialling Press Redial/P ause to dial the last number you dialled with the n umeric buttons.
7-10 Sending F axes Chapter 7 2 Press Stop . • The F AX asks you to confirm that you want to cancel automatic redialling. 3 Press T to cancel redialling. • Redialling is not cancelled until you press T . • If you change y our mind and want to continue redialling, press # .
Chapter 7 Sending F axes 7-11 Sending Fax es 8 Use ∂ or ¨ to select the setting you want. • Y ou can select from the f ollowing: – ON Enables automatic redialling. – OFF Disables automatic redialling. ■ If you selected OFF in step 8: 9 Press Set .
7-12 Sending F axes Chapter 7 Sending the Same Document to Several Fax Numbers (Sequential Br oadcasting) This f eature, also called Sequential Broadcasting , allo ws you to send the same document to se ver al fax numbers in one oper ation.
Chapter 7 Sending F axes 7-13 Sending Fax es n • Y ou can enter the f ax numbers in any order . • If you enter a wrong destination, press Clear , then enter the correct destination. • Y ou must enter the second destination within five seconds of entering the first one.
7-14 Sending F axes Chapter 7 Delayed Sending Y our F AX allows you to scan a document into its memory and send it automatically to as many as 125 f ax numbers at a preset time within the ne xt 24 hours. This is called Dela yed sending or Timer sending .
Chapter 7 Sending F axes 7-15 Sending Fax es 7 Enter up to 125 f ax numbers y ou want to send to using any of the f ollowing methods: ❚ One-touch speed dialling: Press the one-touch speed dialling Ex: button(s) y ou want. ❚ Coded speed dialling: Press Coded Dial , then use the Ex: numeric buttons to enter the two- digit code you w ant.
7-16 Sending F axes Chapter 7 Printing a Document Set for Delayed Sending F ollow this procedure to print a document stored in memor y f or delay ed sending: n When you print a document stored in memory for dela yed sending using the f ollowing procedure, the print is reduced to 90% of the original.
Chapter 7 Sending F axes 7-17 Sending Fax es Deleting a Document Set for Delayed Sending F ollow this procedure to delete a document stored in memory for dela yed sending: 1 Open the one-touch speed dial panel. 2 Press Dela yed T ransmission . 3 Use ∂ or ¨ to select DELETE FILE .
7-18 Sending F axes Chapter 7.
Chapter 8 Receiving F axes 8-1 Receiving Fax es Chapter 8 Receiving Faxes Receiving Methods ...................................................................................8-2 Receiving F axes A utomatically: F AX ONL Y MODE .......................
8-2 Receiving F axes Chapter 8 Receiving Methods The F AX provides y ou with se v eral modes f or receiving fax es. T o deter mine which mode best suits your requirements , refer to the tab le below: Once you ha ve decided which mode is suitab le f or your needs , set the mode as described in this chapter .
Chapter 8 Receiving F axes 8-3 Receiving Fax es Receiving Faxes Automatically: F AX ONL Y MODE If you ha ve a separate telephone line f or fax use only , connect y our F AX to this line and set F AX ONL Y MODE. Y our F AX will answer all calls as f ax calls.
8-4 Receiving F axes Chapter 8 11 Confir m that FaxOnly is displa yed in Ex: the LCD . • If FaxOnly is not displa yed, press Receive Mode to select F AX ONL Y MODE . After a fe w seconds, the LCD returns to standby mode. The F AX treats all incoming calls as f ax calls.
Chapter 8 Receiving F axes 8-5 Receiving Fax es Receiving Both Faxes and T elephone Calls Automatically: Fax/T el Mode Set this mode if you only ha ve one telephone line f or fax and telephone use and w ant your F AX to automatically switch betw een f ax and voice calls .
8-6 Receiving F axes Chapter 8 Setting the Options for Fax/T el Mode If you set Fax/T el Mode , you can control precisely ho w the F AX handles incoming calls by adjusting the f ollowing settings: – RING ST ART TIME setting: Adjust the time the F AX takes to chec k whether a call is from a f ax machine or from a telephone (def ault: 8 seconds).
Chapter 8 Receiving F axes 8-7 Receiving Fax es F ollow this procedure to set the Fax/T el Mode options: 1 F ollow steps 1 to 9 on page 8-5. 2 Press Set . Ex: 3 Use the numeric buttons to enter the Ex: RING ST ART TIME duration. • Y ou can select from 0 to 30 seconds .
8-8 Receiving F axes Chapter 8 Receiving Faxes Manually: MANUAL MODE Set this mode if you only ha ve one telephone line that y ou use mainly f or v oice calls, and only occasionally to receiv e f ax es.
Chapter 8 Receiving F axes 8-9 Receiving Fax es ■ If you hear a beep tone or silence: 4 Someone is tr ying to send y ou a fax. Press Start/Copy on y our F AX and hang up to begin receiving the document.
8-10 Receiving F axes Chapter 8 Receiving With an Answering Machine: ANS.MACHINE MODE Connecting an ans wering machine to the F AX allows y ou to receive f ax es and telephone messages while you are out.
Chapter 8 Receiving F axes 8-11 Receiving Fax es Receiving While Per forming Other T asks The F AX is a multitasking de vice so it can receive f axes and v oice calls while you are perf orming other tasks.
8-12 Receiving F axes Chapter 8.
Chapter 9 Special F eatures 9-1 Special Features Chapter 9 Special Featur es Special Dialling .........................................................................................9-2 Entering Pauses in a F ax/T elephone Number ....................
9-2 Special F eatures Chapter 9 Special Dialling Entering Pauses in a Fax/T elephone Number Y ou may need to enter pauses in a f ax/telephone number in the f ollowing situations: – When y ou dial or register an overseas n umber . The length and position of the pause depends on the telephone system of your country .
Chapter 9 Special F eatures 9-3 Special Features Switching T emporarily to T one Dialling Many inf or mation services for banks, airline reservations, hotel reservations , etc., require tone dialling f or their ser vices . If your F AX is set for pulse dialling ( 1 p .
9-4 Special F eatures Chapter 9 Confir ming a Dial T one * This f eature allows y ou to set your F AX to listen f or and detect a dial tone in the middle of a f ax/telephone number bef ore dialling the rest of the number . This is called Dial tone detection .
Chapter 9 Special F eatures 9-5 Special Features Documents Stor ed in Memor y This section describes how to perf orm different operations with documents stored in memor y . Y ou will find instructions for printing a list of documents in memor y , as well as procedures f or printing, sending, and deleting documents stored in memor y .
9-6 Special F eatures Chapter 9 Printing a Document Stor ed in Memor y F ollow this procedure to print a document stored in memor y: n When you print a document stored in memory using the following procedure , the print is reduced to 90% of the original.
Chapter 9 Special F eatures 9-7 Special Features Sending a Document Stor ed in Memor y F ollow this procedure to send a document receiv ed in memor y: 1 Open the one-touch speed dial panel. 2 Press Memory Reference . 3 Use ∂ or ¨ to select RESEND DOCUMENT .
9-8 Special F eatures Chapter 9 ❚ Regular dialling: Use the numeric buttons to enter the Ex: f ax number y ou want, then press Set . • Y ou can only enter one f ax number this way . n • If you enter a wrong destination, press Clear , then enter the correct destination.
Chapter 9 Special F eatures 9-9 Special Features Deleting a Document Stor ed in Memor y F ollow this procedure to delete a document stored in memory: 1 Open the one-touch speed dial panel. 2 Press Memory Reference . 3 Use ∂ or ¨ to select DELETE DOCUMENT .
9-10 Special F eatures Chapter 9 Polling What is Polling? In normal faxing, a f ax machine sends a document to another fax machine . With polling, a f ax machine calls another f ax machine and requests that a document be sent to it; in other words , it “ polls ” that f ax machine.
Chapter 9 Special F eatures 9-11 Special Features F ollow this procedure to poll one or se ver al fax machine(s): 1 Open the one-touch speed dial panel.
9-12 Special F eatures Chapter 9 Cancelling Polling Receiving T o cancel polling receiving, f ollow the same procedure as f or cancelling receiving ( 1 p . 8-11). Polling Sending In polling sending, your F AX holds a document in its polling box so that other f ax machines can retriev e it.
Chapter 9 Special F eatures 9-13 Special Features 5 Press Set three times . 6 Use the numeric buttons to enter a Ex: name f or the polling bo x (max. 24 characters, including spaces). • If you are unsure ho w to enter characters, see p . 3-2. 7 Press Set twice .
9-14 Special F eatures Chapter 9 11 Press Set twice . Ex: 12 Use ∂ or ¨ to select if the document remains in the F AX ’ s memor y after it is polled. • Y ou can select from the f ollowing: – ON The document in the polling bo x is deleted after it is retriev ed by one fax machine.
Chapter 9 Special F eatures 9-15 Special Features Scanning a Document into the Polling Box F ollow this procedure to store a document in the polling bo x so that other fax machines can retriev e it: n Y ou need to set up the polling bo x before y ou can scan a document into the polling bo x ( 1 p .
9-16 Special F eatures Chapter 9 2 Press Data Registration . 3 Press Set . 4 Use ∂ or ¨ to select POLLING BOX . 5 Press Set . 6 Use ∂ or ¨ to select the setting you want. • Y ou can select from the f ollowing: – CHANGE DA T A Select this setting if you w ant to change the polling bo x settings.
Chapter 9 Special F eatures 9-17 Special Features Restricting Use of Y our F AX By enabling this f eature, y ou can pre vent unauthorised use of y our F AX to make calls and send f ax es. Enabling Restriction of Y our F AX F ollow this procedure to enab le restr iction of y our F AX: 1 Open the one-touch speed dial panel.
9-18 Special F eatures Chapter 9 10 Press Stop to return to standby mode . Ex: Restriction of your F AX is now enab led. No one can make calls or send f ax es.
Chapter 9 Special F eatures 9-19 Special Features 9 Press Set . 10 Press Stop to return to standby mode . Ex: Restriction of your F AX is now disab led.
9-20 Special F eatures Chapter 9 Restricting Reception By enabling this f eature, y ou can restrict reception of fax es to only the numbers registered f or speed dialling on your F AX. This f eature is useful to prev ent reception of unsolicited f ax es (e.
Chapter 9 Special F eatures 9-21 Special Features 11 Press Set . 12 Press Stop to return to the standby mode . Ex: ■ If you selected OFF in step 8: 9 Press Set .
9-22 Special F eatures Chapter 9.
Chapter 10 Cop ying 10-1 Copying Chapter 10 Copying Documents Y ou Can Copy .....................................................................10-2 Making Copies .......................................................................................
10-2 Cop ying Chapter 10 Documents Y ou Can Copy F or inf ormation on the types of documents you can cop y , their requirements, and details on loading documents, see Chapter 4. Making Copies F ollow this procedure to mak e copies: 1 Adjust the paper delivery selector if necessar y ( 1 p .
Chapter 10 Cop ying 10-3 Copying 7 If you w ant to make multiple copies, Ex: use the numeric buttons to enter the number of copies. • Y ou can mak e up to 99 copies. n The F AX copies at 400 × 300 dpi f or single copies, and at 200 × 300 dpi f or multiple copies.
10-4 Cop ying Chapter 10.
Chapter 11 Repor ts and Lists 11-1 Reports and Lists Chapter 11 Repor ts and Lists Summary of Repor ts and Lists .............................................................11-2 A CTIVITY REPORT .......................................................
11-2 Repor ts and Lists Chapter 11 Summar y of Reports and Lists The table belo w shows the lists and repor ts that can be printed from your F AX. Ref er to the pages indicated f or more details. Report or List USER’S D A T A LIST A CTIVITY REPOR T TX (T ransmission) REPOR T RX (Reception) REPOR T MUL TI TX/RX (T ransaction) REPOR T DOC .
Chapter 11 Repor ts and Lists 11-3 Reports and Lists ACTIVITY REPOR T The F AX is f actor y-set to automatically print an A CTIVITY REPOR T after e very 20 transactions. If you want to print an A CTIVITY REPORT bef ore it is automatically printed, follo w this procedure: 1 Open the one-touch speed dial panel.
11-4 Repor ts and Lists Chapter 11 TX (T ransmission) REPOR T The F AX is f actor y-set to print a TX (transmission) REPOR T only when an error occurs during sending.
Chapter 11 Repor ts and Lists 11-5 Reports and Lists MUL TI TX/RX (T ransaction) REPORT A MUL TI TX/RX (transaction) REPOR T similar to the one below , is printed when you send the same document to se v eral f ax numbers, or when y ou poll multiple f ax numbers in one operation.
11-6 Repor ts and Lists Chapter 11.
Chapter 12 Maintenance 12-1 Maintenance Chapter 12 Maintenance P eriodic Cleaning ...................................................................................12-2 Cleaning the F AX’ s Exter ior.................................................
12-2 Maintenance Chapter 12 Periodic Cleaning This section describes the necessar y cleaning procedures f or your F AX. Please note the f ollowing bef ore cleaning your unit: • Be sure to disconnect the power cord bef ore cleaning the F AX.
Chapter 12 Maintenance 12-3 Maintenance Cleaning the F AX ’ s Interior T o pre vent toner powder and paper dust from accum ulating inside the F AX and aff ecting print quality , clean the unit ’ s print area per iodically . F ollow this procedure to clean inside the F AX: 1 Disconnect the power cord from the F AX.
12-4 Maintenance Chapter 12 5 When you are finished, reinsert the toner car tridge. Hold the toner car tridge by its handle and inser t it into the F AX as f ar as it will go , making sure that its tabs are aligned with the rails inside the unit. • Alwa ys hold the toner car tridge by its handle.
Chapter 12 Maintenance 12-5 Maintenance Cleaning the Scanner Components F ollow this procedure to periodically check and clean the scanner components: 1 Disconnect the power cord from the F AX. 2 Use both hands to gently open the operation panel. • It only opens par tially .
12-6 Maintenance Chapter 12 5 Use a clean, soft, dr y , lint-free cloth to wipe any paper dust from the areas surrounding the separation roller (shaded area in the the illustration). 6 When you are finished, close the operation panel b y pressing it down from the centre.
Chapter 12 Maintenance 12-7 Maintenance Replacing the T oner Car tridge The only component of your F AX you will need to replace is the FX-3 toner car tridge. Although Canon manuf actures many diff erent toner car tridges, the FX-3 toner car tridge is the only one designed f or use with your F AX.
12-8 Maintenance Chapter 12 4 Hold the toner car tridge by its handle and remov e it from the F AX. • Discard the old toner car tridge immediately according to the local laws and regulations f or disposal of consumables . T o recycle your used toner car tridge, simply f ollow the instructions included with your new FX-3 toner car tridge.
Chapter 12 Maintenance 12-9 Maintenance 8 Hold the toner car tridge by its handle and inser t it into the F AX as far as it will go , making sure that its tabs are aligned with the rails inside the unit. • Alwa ys hold the toner car tridge by its handle.
12-10 Maintenance Chapter 12.
Chapter 13 T roub leshooting 13-1 T roubleshooting Chapter 13 T roubleshooting Clearing Jams .........................................................................................13-2 Jams in the ADF ................................................
13-2 T roub leshooting Chapter 13 Clearing Jams Jams in the ADF When a document jams or misf eeds in the ADF , the LCD displa ys CHECK DOCUMENT . F ollow this procedure to clear the document jam: n Y ou do not need to unplug the F AX when clear ing document jams.
Chapter 13 T roub leshooting 13-3 T roubleshooting Paper Jams When paper jams in the F AX, the LCD displa ys CLEAR P APER JAM . T r y clearing the jam by f ollowing the procedure in J ams in the P aper Delivery Slots below . If this does not clear the jam, f ollow the procedure in J ams Inside the Unit .
13-4 T roub leshooting Chapter 13 2 Hold the toner car tridge by its handle and remov e it from the F AX. • T o av oid exposing the toner car tridge to light, place it in its protective bag or wrap it in a thic k cloth. 3 Mov e the paper release lev er back.
Chapter 13 T roub leshooting 13-5 T roubleshooting 4 Locate the paper jam and clear it as e xplained on the f ollowing pages . z Multi-purpose tray area: Hold the unit steady and carefully pull the jammed paper straight out from the unit. • Do this carefully to pre vent tearing the jammed paper .
13-6 T roub leshooting Chapter 13 x Fixing assembly area: T op edge of the jammed paper in the fixing assembl y: Push the jammed paper back q , then pull it carefully tow ards you to remo ve it w . c The fixing assembly becomes extremel y hot when the unit is in use.
Chapter 13 T roub leshooting 13-7 T roubleshooting 5 When you are finished, reinsert the toner car tridge. Hold the toner car tridge by its handle and inser t it into the F AX as f ar as it will go , making sure that its tabs are aligned with the rails inside the unit.
13-8 T roub leshooting Chapter 13 AUTO REDIAL BUSY/NO SIGNAL CHANGE CARTRIDGE — #018 — The unit is waiting to redial the other par ty ’ s f ax number because the line was b usy or the other par ty did not ans wer when y ou tried to send the document.
Chapter 13 T roub leshooting 13-9 T roubleshooting CHECK COVER CHECK DOCUMENT CHECK P APER SIZE CHECK POLLING ID CHECK PRINTER — #001 — #021 #008 — The front cov er is open. A document is jammed in the ADF . The size of the paper in the multi-purpose tray and that specified in the P APER SIZE setting are diff erent.
13-10 T roub leshooting Chapter 13 CHK SUBADDR/PSWD CLEAR P APER JAM DOC. TOO LONG ECM RX ECM TX LOAD P APER MEMORY FULL #083/102 — #003 — — — #037 Y ou attempted to send a document or poll another f ax machine with the incorrect subaddress and/or pass word.
Chapter 13 T roub leshooting 13-11 T roubleshooting MEMORY USED nn % NO RX P APER NO TEL # NOT A V AILABLE PSWD POLL REJECT PSWD TX REJECTED — #012 #022 — #084 #081 Shows the percentage of memor y currently in use. The other par ty ’ s f ax machine is out of paper or its memor y is full.
13-12 T roub leshooting Chapter 13 REC’D IN MEMORY SELECT POL REJCT SUBADD TX REJECT TX/RX CANCELLED TX/RX NO. nnnn TX/RX NO. nnnn SCANNING P .nnn MEMORY FULL (Three messages toggle.) — #082 #080 — — — The unit received the f ax in memor y because paper or toner ran out, or a paper jam occurred during reception.
Chapter 13 T roub leshooting 13-13 T roubleshooting Paper Feeding Pr oblems ■ Paper does not feed properly . The multi-purpose tra y may contain too many sheets. • Make sure y ou load the correct quantity ( 1 p. 5-2). The paper may not be loaded correctl y .
13-14 T roub leshooting Chapter 13 Y ou dialled or have been pr ovided with an incorrect n umber . • Dial the number again, or chec k that you ha ve the correct number . The other party ’ s fax machine may be out of paper . • Contact the other par ty and ask them to mak e sure paper is loaded in their f ax machine.
Chapter 13 T roub leshooting 13-15 T roubleshooting ■ Errors occur fr equently while sending. The telephone lines may be in poor condition, or you ma y have a bad connection. • Lower the tr ansmission speed ( 1 TX ST ART SPEED , p. 14-10). n If none of these solutions solve the prob lem, unplug the F AX and wait f or at least five seconds.
13-16 T roub leshooting Chapter 13 An error ma y have occurred during reception. • Check the LCD f or an error message ( 1 p . 13-8). • Print an ACTIVITY REPOR T and check f or an error code ( 1 p. 11-3). The multi-purpose tra y may be empty . • Make sure paper is loaded in the m ulti-pur pose tr a y ( 1 p .
Chapter 13 T roub leshooting 13-17 T roubleshooting T oner may be lo w or unevenl y distributed. • Redistribute the toner inside the toner car tridge ( 1 p . 12-7). If the problem persists, replace the toner car tridge ( 1 p. 12-7). ■ Cannot receive using Err or Correction Mode (ECM).
13-18 T roub leshooting Chapter 13 T elephone Pr oblems ■ Cannot dial. The telephone line cord ma y not be connected properly . • Make sure it is connected properly ( 1 p . 2-6). The power cor d may not be plugged in securely . • Check that the po wer cord is plugged securely into the F AX and into the wall outlet ( 1 p .
Chapter 13 T roub leshooting 13-19 T roubleshooting Y ou may not have remo ved the plastic seal from the toner cartridge . • Make sure y ou install the toner car tr idge properly ( 1 p . 2-13). The toner cartridg e ma y need to be replaced. • Replace the toner car tridge ( 1 p .
13-20 T roub leshooting Chapter 13 General Pr oblems ■ F AX has no power . The power cor d may not be plugged in securely . • Check that the po wer cord is plugged securely into the F AX and into the wall outlet ( 1 p . 2-8). If the unit is plugged into a power strip , make sure the pow er strip is plugged in and turned on.
Chapter 13 T roub leshooting 13-21 T roubleshooting If Y ou Cannot Solve a Pr oblem If you cannot solv e the problem after ha ving ref erred to the inf ormation in this chapter , contact your local authorised Canon dealer or the Canon help line.
13-22 T roub leshooting Chapter 13 If a Power Cut Occurs If power is suddenly lost due to a po wer cut or accidental unplugging, a built-in battery retains the F AX ’ s settings.
Chapter 14 Summar y of Settings 14-1 Summary of Settings Chapter 14 Summar y of Settings Understanding the Menu System ..........................................................14-2 Printing a List to Check the Current Settings .......................
14-2 Summar y of Settings Chapter 14 Understanding the Menu System The F AX menu system allows y ou to customise the wa y your unit oper ates. It consists of se v en menus, each containing settings that control diff erent functions of your F AX.
Chapter 14 Summar y of Settings 14-3 Summary of Settings Accessing the Menus F ollow this procedure to access the diff erent menus: 1 Open the one-touch speed dial panel. 2 Press Data Registration . 3 Press Set . 4 Use ∂ or ¨ to select the menu you want.
14-4 Summar y of Settings Chapter 14 DA TE & TIME UNIT TELEPHONE # UNIT NAME TX TERMINAL ID TTI POSITION TELEPHONE # MARK SCAN CONTRAST OFFHOOK ALARM VOLUME CONTROL CALLING VOLUME KEYP AD VOLUME ALARM VOLUME LINE MONITOR VOL RX CALL LEVEL TEL LINE TYPE R-KEY SETTING Sets the current date and time ( 1 p .
Chapter 14 Summar y of Settings 14-5 Summary of Settings TX REPORT PRINT WITH IMAGE RX REPORT ACTIVITY REPORT Enables/disab les automatic pr inting of a TX (transmission) REPOR T ( 1 p. 11-4). PRINT ERROR ONL Y : Prints a repor t only when a transmission error occurs.
14-6 Summar y of Settings Chapter 14 ECM TX MID P AUSE SET AUTO REDIAL REDIAL TIMES REDIAL INTERV AL TIME OUT Enables/disab les Error Correction Mode (ECM) dur ing transmission. Selects the length of a pause entered within a f ax/telephone number with the Redial/P ause button.
Chapter 14 Summar y of Settings 14-7 Summary of Settings ECM RX RX MODE INCOMING RING RING COUNT MAN/AUTO SWITCH F/T RING TIME REMOTE RX REMOTE RX ID MEMORY RX RX P AGE FOOTER Enables/disab les Error Correction Mode (ECM) dur ing reception. Selects the receive mode ( 1 Chapter 8).
14-8 Summar y of Settings Chapter 14 RX REDUCTION P APER SIZE ECONOMY PRT TONER SUPPL Y LOW Enables/disab les reduction of fax es to fit on the paper loaded in the multi-purpose tray . If you select ON , y ou can select the direction of the reduction.
Chapter 14 Summar y of Settings 14-9 Summary of Settings SETUP FILE FILE NAME P ASSWORD TX P ASSWORD ERASE AFTER TX CHANGE DA T A P ASSWORD DELETE FILE P ASSWORD Sets up the polling bo x to hold a document to be polled ( 1 p . 9-12). Enters the name f or the polling box.
14-10 Summar y of Settings Chapter 14 UN/LOCK PHONE LOCK PHONE P ASSWORD RX RESTRICTION DA TE SETUP DISPLA Y LANGUAGE TX ST ART SPEED Enables/disab les restr iction of the F AX ( 1 p . 9-17). Enables/disab les restr iction of the F AX to make calls and send f axes .
Chapter 14 Summar y of Settings 14-11 Summary of Settings Setting Description Sub-Settings RX ST ART SPEED COUNTRY SELECT * SUMMER TIME * Selects the speed at which the F AX star ts receiving.
14-12 Summar y of Settings Chapter 14.
Appendix A Specifications A-1 Specifications Appendix A Specifications General Specifications ............................................................................A-2 Facsimile ...................................................................
A-2 Specifications Appendix A General Specifications P ower Source – 200–240 V – 50/60 Hz P ower Consumption – Maximum: 500 W – Standby: Approx. 3.5 W W eight Appro x. 10 kg (With components attached) Dimensions En vironmental Conditions – T emperature: 10 °– 32.
Appendix A Specifications A-3 Specifications Fax Resolution – F AX ST ANDARD: 8 pels/mm × 3.85 lines/mm – F AX FINE: 8 pels/mm × 7.7 lines/mm – F AX PHO T O: 8 pels/mm × 7.
A-4 Specifications Appendix A.
Appendix B Default Settings f or Each Countr y B-1 Default Settings for Eac h Country Appendix B Default Settings for Each Countr y Default Settings for Eac h Country .........................................................B-2 UK, GERMANY , FRANCE, IRELAND .
B-2 Def ault Settings f or Each Countr y Appendix B Default Settings for Each Countr y The def ault settings in the menus depend on the country you hav e purchased the F AX. A “–” symbol in the table indicates that the men u item or setting option is not availab le.
Appendix B Default Settings f or Each Countr y B-3 Default Settings for Eac h Country Country Menu/Setting RX SETTINGS Menu ECM RX RX MODE INCOMING RING RING COUNT MAN/A UTO SWITCH F/T RING TIME REMO .
B-4 Def ault Settings f or Each Countr y Appendix B Country Menu/Setting USER SETTINGS Menu TX TERMINAL ID TTI POSITION TELEPHONE # MARK SCAN CONTRAST OFFHOOK ALARM V OLUME CONTROL CALLING V OLUME KEY.
Appendix B Default Settings f or Each Countr y B-5 Default Settings for Eac h Country Country Menu/Setting RX SETTINGS Menu ECM RX RX MODE INCOMING RING RING COUNT MAN/A UTO SWITCH F/T RING TIME REMO .
B-6 Def ault Settings f or Each Countr y Appendix B.
Appendix C Countr y-specific F eatures C-1 Country-specific Features Appendix C Countr y-specific Featur es United Kingdom .......................................................................................C-2 Connecting Exter nal De vice ........
C-2 Countr y-specific F eatures Appendix C United Kingdom Connecting External Device If the connectors of the e xternal devices cannot be connected to the jac ks on the F AX, you will need to purchase one or more B .T . adaptors to connect them as follo ws: Ringer Equivalence Number (R.
Appendix C Countr y-specific F eatures C-3 Country-specific Features Ger many This product is designed for use f or residential, commercial and light-industr ial pur poses .
C-4 Countr y-specific F eatures Appendix C Connecting an Answering Machine By connecting an ans wering machine to the same telephone line jack on the w all as the F AX, you can not only receiv e documents from another fax, b ut also receive v oice calls.
Appendix C Countr y-specific F eatures C-5 Country-specific Features Australia For Y our Safety T o ensure saf e operation the three-pin plug supplied must be inser ted only into a standard three-pin power point which is eff ectively earthed through the nor mal household wiring.
C-6 Countr y-specific F eatures Appendix C Setting the F AX for Network Switch F ollow this procedure to set the receiv e mode to NET SWITCH : 1 Open the one-touch speed dial panel. 2 Press Data Registration . 3 Press Set . 4 Use ∂ or ¨ to select RX SETTINGS .
Appendix C Countr y-specific F eatures C-7 Country-specific Features New Zealand Caution 1. This equipment may not necessarily provide f or the effectiv e hand-ov er of a call to or from a telephone connected to the same line.
C-8 Countr y-specific F eatures Appendix C Setting the F AX for Network Switch F ollow this procedure to set the receiv e mode to NET SWITCH : 1 Open the one-touch speed dial panel. 2 Press Data Registration . 3 Press Set . 4 Use ∂ or ¨ to select RX SETTINGS .
Appendix D Options D-1 Options Appendix D Options Optional Handset .....................................................................................D-2 P ackage Contents .............................................................................
D-2 Options Appendix D Optional Handset* An optional handset is av ailable in cer tain countries f or connection to your F AX. Contact your local authorised Canon dealer f or more information on purchasing this option. n Please note that the shape of your handset ma y differ from the one sho wn in this section.
Appendix D Options D-3 Options Attaching the Handset to Y our F AX F ollow this procedure to attach the handset to y our F AX: 1 Use a screwdriv er to remov e the two cov ers on the left side of the unit. 2 Remov e the screws from the plugs and inser t the plugs into the holes on the handset cradle.
D-4 Options Appendix D Maintaining Y our Handset T o maintain y our handset in top working condition, be sure to f ollow these guidelines: • Do not leav e your handset e xposed to direct sunlight. • Do not install your handset in hot or humid conditions .
Appendix E F AX-L290 Instructions E-1 F AX-L290 Instructions Appendix E F AX-L290 Instructions Introduction ..............................................................................................E-2 Differences Between the F AX-L290 and F AX-L240 .
E-2 F AX-L290 Instructions Appendix E Intr oduction This Appendix provides inf or mation rele vant only to purchasers of the F AX-L290 model. Please be sure to read this section bef ore reading the rest of this guide.
Appendix E F AX-L290 Instructions E-3 F AX-L290 Instructions Connecting the F AX-L290 to Y our PC T o connect y our F AX to a PC , you will need to purchase a printer cable that matches the interf ace connector on your PC: • A USB cable no longer than 5 metres Y ou can purchase the cable from y our local authorised Canon dealer .
E-4 F AX-L290 Instructions Appendix E Print Media Requir ements In addition to the paper listed in Chapter 5, you can also load the f ollowing print media in the multi-purpose tray: Print Media Size Quantity Env elopes European DL 7 env elopes (220 × 110 mm/ 8.
Appendix E F AX-L290 Instructions E-5 F AX-L290 Instructions Selecting Print Media F ollow these guidelines when selecting en velopes and transparencies: n F or paper guidelines, see Chapter 5. ■ Envelopes • Use standard env elopes with diagonal seams and flaps.
E-6 F AX-L290 Instructions Appendix E Loading Envelopes F ollow this procedure to load up to 7 en velopes in the multi-purpose tra y: 1 Prepare the env elopes. ❚ Arrange the stac k of env elopes on a firm, clean surface, and press do wn fir mly on the edges to mak e the folds crisp.
Appendix E F AX-L290 Instructions E-7 F AX-L290 Instructions 3 Inser t the stac k into the multi-purpose tra y q (print side facing y ou), then adjust the paper guides to the width of the stack w . 4 Replace the multi-purpose tray co ver . • Be sure to replace this cov er to prev ent dust accumulating inside the unit.
E-8 F AX-L290 Instructions Appendix E.
Inde x I-1 Index Index + button 2-12, 3-7 ∂ button 2-12, 14-3 ¬ button 2-12, 3-4 ® button 2-12, 3-3, 3-4 ¨ button 2-12, 14-3 ( 1 p . n-nn), definition 1-2 1-T OUCH SPD DIAL LIST 1 description 11-.
I-2 Inde x Components, F AX 2-11, 2-12. See also individual component names Connecting answ er ing machine 2-6, 2-7 B.T . adaptor C-2 data modem 2-6, 2-7 external de vice 2-6, 2-7 handset 2-6 power co.
Inde x I-3 Index F F/T RING TIME setting 8-6, 8-7, 14-7 F ace-down delivery 5-4, 5-5 slot 2-11, 5-4 F ace-up delivery 5-4, 5-5, 5-6 slot 2-11, 5-4 F ax, definition 1-2 F AX 2-2 assembling 2-5 cleaning 12-2 to 12-6 clearing jams 13-2 to 13-7 components 2-11, 2-12.
I-4 Inde x MANU AL MODE description 8-2 setting 8-8, 8-9 Manual redialling 7-9 cancelling 7-9 Manual sending via the handset 7-6, 7-7 cancelling 7-8 Manual setting.
Inde x I-5 Index definition 9-10 receiving. See P olling receiving sending. See P olling sending P olling box changing settings 9-15, 9-16 deleting settings 9-15, 9-16 scanning document into 9-15 sett.
I-6 Inde x RX REPORT . See also RX (Reception) REPOR T setting 14-5 RX RESTRICTION setting 9-20, 14-10 RX SETTINGS menu. See RX (Reception) SETTINGS menu RX ST ART SPEED setting 14-10 RX TO MEMOR Y se.
Inde x I-7 Index T oner car tridge 2-2 compar tment 2-11 installing 2-13 to 2-15 replacing 12-7 to 12-9 T oner saver setting 5-9 T ONER SUPPL Y LOW setting 14-8 T OUCH T ONE setting 3-8, 14-4 T ransfer charging roller 2-11 T ransmission repor t.
I-8 Inde x.
HT1-2194-000-V.1.0 PRINTED IN CHINA XXXXXXXX.
Een belangrijk punt na aankoop van elk apparaat Canon FAX-L290 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon FAX-L290 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon FAX-L290 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon FAX-L290 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon FAX-L290 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon FAX-L290 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon FAX-L290 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon FAX-L290 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
