Gebruiksaanwijzing /service van het product LV-8227A van de fabrikant Canon
Ga naar pagina of 84
MUL TIMEDIA PROJECT OR User ’ s M anu al.
2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology .
3 Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design ..............
4 .
5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain th em for late r use.
6 Immediately turn the power off, unplug the projector , and contact your dealer under the following conditions, otherwise a fire or an electric shock may result. – If smoke comes out from it.
7 – Remove the batteries when they have been exhausted or not in use for an extended period of time. – Be sure to replace both batteries at the same time.
8 Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Hot air is exhausted from the exhaust vent.
9 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
10 ⑤ ⑦ ⑧ ③ ② ⑥ ① .
11 ② ③ ① ⑥ ⑤ ⑧ ④ ④ Connect the composite video output signal to this jack (p.
12 ⑦ Lights yellow when the projection lamp reaches its end of life (pp.68, 75).
13 LV -RC06 T o ensure safe operation, please observe the following precautions: – Do not bend, drop or expose the remote control unit to moisture or heat.
14 T o ensure safe operation, please observe the following precautions : ● Use two (2) AAA type batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery .
15 For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen.
16 Adjustable Foot Foot Lock Latch Pr o j e ct i o n a ng l e c a n b e a dj u s t ed u p t o 1 0 .
17 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
18 External Audio Equipment Audio cable (stereo) S-VIDEO cable Audio Output.
19 .
20 This projector uses nominal input voltages of 100- 240 V AC and it automatically selects the correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor .
21 The preparation display will disappear after 30 seconds. (See page 59 for Lamp mode status.) Connect the projector ’s AC power cord into an AC outlet.
22 PI N ( Pe rs on al Id en ti fi ca ti on N um be r) co de is a security code that allows the person who knows it t o o pe r at e t he p r oj e ct o r. S et t in g a P IN c o de prevents unauthorized use of the projector .
23 .
24 OK P O WER A U TO S E T MENU LAMP REPLACE WARNING VOL VOL T h e p r o j e c t o r c a n b e a d j u s t e d o r s e t v i a t h e O n - S c r e e n M e n u .
25 Main Menu For detailed functions of each menu, see “Menu T ree” on pages 73-74.
26 Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. .
27 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select . Press the Point ► or the OK button to access the submenu items.
28 High ........... Brighter than the Normal mode. Normal ...... Normal brightness Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life.
29 Press the P-TIMER button on the remote control unit to operate the Count up/Count down function. Refer to p.57 for detail of Setting for the P-timer function.
30 LV -RC06 Choose by pressing the COMPUTER button on the remote control unit. 1 2 3 When the Auto input function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.
31 This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment.
32 When the image is not stable or flicker , or when the image is not in right position as inputing ANALOG PC signal, press the AUTO SET button on the remote.
33 Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector .
34 T o store the adjusted data, select and then press the Point ► or the OK button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the OK button.
35 LV -RC06 .
36 Reset Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select and then press the Point ► or the OK button.
37 .
38 Select . The On-Screen Menu disappears and appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image.
39 This projector has the picture screen resize function, which enables you to customize the image size.
40 Select . The On-Screen Menu disappears and appears. Press the OK button to expand the image size. Use the Point ▲▼◄► buttons to pan the image.
41 Choose VIDEO or by pressing the VIDEO or the S-VIDEO button on the remote control unit.
42 LV -RC06 Choose or by pressing the COMPONENT or the COMPUTER button on the remote control unit. Choose HDMI by pressing the HDMI button on the remote controller .
43 1 .
44 LV -RC06 .
45 1 2 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63).
46 An interlaced video signal can be displayed in progressive mode. Select one of the following options. ........ Disabled. L 1 ........ For an active picture. L 2 ........ For a still picture. .
47 .
48 This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. T o correct keystone distortion, press the OK button.
49 This projector has the picture screen resize function, which enables you to customize the image size.
50 This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. T o correct keystone distortion, press the OK button.
51 Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select and press the Point ► or the OK button to access the submenu items.
52 • During is in progress, If the MENU button or the POWER button is pressed, will stop.
53 This function decides whether to display On-Screen Displays. On ........................ Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough.
54 This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select and press the OK button. A confirmation box appears and select to capture the projected image.
55 Use the Point ▲▼ buttons to enter a number . Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box.
56 T ime left before Lamp is off. For reducing power consumption as well as maintaining the lamp life, the Power management mode function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: .
57 This function is available when operating the projector via network. .
58 Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels.
59 This projector provides two different remote control codes: the factory-set initial code ( ) and the secondary code ( ).
60 This function locks the top control and remote control unit buttons to prevent operation by unauthorized persons.
61 Use the Point ▲▼ buttons to select , On 1 or On 2 , and then press the OK button to make a choice.
62 This function provides the following options in the cooling fans’ operation when the projector is turned off (p.23). L 1 .... Normal operation L 2 .... Slower , lower-sound and longish-time than the normal operation ( L 1 ).
63 This function returns all setting values except for the , .
64 The Information Menu is used for checking the status of the image signal being projected and the operation of the projector .
65 OK P O WER A U TO SE T MENU LAMP REPLACE WARNING VOL VOL The W ARNING indicator shows the state of the function which protects the projector . Check the state of the W ARNING indicator and the POWER indicator to take proper maintenance.
66 Filter prevents dust from accumulating on the optical elements inside the projector . Should the Filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector .
67 .
68 When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly .
69 T h is p r o j e c t o r u s e s a h i g h -p r e s s u r e l a m p w h i c h mu s t b e h a n d l e d c a r e f ul l y a n d properly .
70 – Solutions – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – W ait until the POWER indicator stops blinking to turn on the projector again.
71 – Check the connection between your computer or video equipment and the projector . See pages 17-19. – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector .
72 – Check menu or menu and adjust them. See pages 33-34, 38-40.
73 Menu T ree V olume Mute On/Off .
74 Auto 1080i 1035i 720p 575p 480p 575i 480i 0–63 0–63 Off (2) Auto P AL SECAM NTSC NTSC 4.
75 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow .
76 Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock.
77 • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected correctly . In such a case, confirm your PC settings.
78 Projector T ype Multi-media Projector Dimensions (W x H x D) 13.13” x 3.98” x 9.
79 Model No. L V -CA32 .
80 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
81 .
82 Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code.
83 Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.47) 79.6(3.13) 46.2(1.82) 3.7(0.15) 17.1(0.67) 33.6(1.32) 35.9 (1.41) 85.4(3.36) 83.8(3.30) 10.0˚ 247.
© CANON INC. 2012 MD2PC 1 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerni ng this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC.
Een belangrijk punt na aankoop van elk apparaat Canon LV-8227A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon LV-8227A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon LV-8227A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon LV-8227A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon LV-8227A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon LV-8227A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon LV-8227A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon LV-8227A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
