Gebruiksaanwijzing /service van het product RE-450X van de fabrikant Canon
Ga naar pagina of 21
E Canon Video Visualizer RE-450X INSTR UCTION MANU AL NTSC/P AL English RE-450X_E 01.10.24 22:14 ページ A.
1 Thank you for purchasing the Canon Video Visualizer RE-450X. The RE-450X is a user-friendly portable image input device with a built-in video camera and a 12 × zoom lens. It projects images of flat documents, three-dimensional objects, film, etc., onto a video monitor.
2 E IMPOR T ANT USAGE INSTRUCTIONS W ARNING: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T EXPOSE THIS PRODUCT T O RAIN OR MOISTURE. FCC NO TICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3 IMPOR T ANT SAFETY INSTRUCTIONS In these safety instructions the word “ product ” refers to the Canon Video Visualizer RE-450X and all its accessories. 1 . Read Instructions — All the safety and operating instructions should be read before the product is operated.
4 E 1 3. Lightning — For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
5 CONTENTS IMPOR T ANT SAFETY INSTRUCTIONS ……… 3 1. NOMENCLA TURE AND FUNCTIONS ………… 6 2. ASSEMBLING, STORING AND CONNECTION … 8 3. OPERA TION ………………………………….
RE-350 V IDE O V ISU AL IZ ER 6 E Power switch (see page 11) Arm Arm lock release lever Rear panel Camera head Lens cap Illumination lamp Document table and Backlight Carrying handle Operation panel After turning the power OFF, wait at least 5 seconds before turning the power ON again.
7 LOW HIGH RED BLUE MANUAL AUTO WHITE PAPER POWER LIGHT BACK LIGHT INPUT SELECT WHITE BALANCE EXPOSURE HARD WIDE TELE NEAR FAR MANUAL AUTO SOFT DETAIL FOCUS ZOOM STILL PICTURE ZOOM PRESET Operation P anel LIGHTS button/indicator Use this button to turn ON the illumination lamps for reflection copies.
8 E Unfold and raise the pair of illumination lamps. Raise the right-hand illumination lamp first ( ), then the left- hand illumination lamp ( ). Press the arm lock release lever, and raise the arm until it stops. Direct the camera head towards the document table.
9 Storing Put the lens cap to the lens. Direct the camera head sideways until it stops. Hold the arm with your right hand and press the arm lock release lever, then pull the arm down to the document table very carefully. Fold the pair of illumination lamps very carefully.
10 E VIDEO OUT S VIDEO OUT RGB OUT RGB IN AC INLET RS-232C To connect the RE-450X to a liquid-crystal projector, use the RGB cable included in the package. Use the power cable included in the package. Connection To protect the RE-450X as well as other equipment in use, make sure all the equipment (if any) is OFF before connecting cables.
11 POWER Turn the power ON. When the power of the RE-450X is turned ON, the POWER indicator on the operation panel lights up. Turn ON the power source of the other equipment to be used. Either the power of the RE-450X or other equipment may be turned on first.
12 E When trying to focus correctly or focusing on a particular point of three-dimensional objects, you can achieve focusing by pressing the manual focusing buttons.
13 D WIDE TELE NEAR FAR MANUAL AUTO FOCUS ZOOM STILL PICTURE ZOOM PRESET STILL PICTURE When an output image is a moving picture, if you press the STILL PICTURE button, the output image will be frozen. The STILL PICTURE indicator lights up while the image is frozen.
14 E LOW HIGH E WHITE PAPER EXPOSURE HARD NE AUTO SOFT DETAIL FO To adjust brightness, turn the EXPOSURE knob. Turn the knob toward the HIGH side to brighten the image. Turn the knob toward the LOW side to darken the image. Use the DETAIL control to adjust picture quality.
15 To RGB input terminal To S-video input terminal or video input terminal VIDEO OUT S VIDEO OUT RGB OUT RGB IN AC INLET RS-232C To output to a video monitor, connect the RE-450X to a monitor ’ s video input terminal using a commercially available video cable.
16 E LOW HIGH RED BLUE MANUAL AUTO WHITE PAPER POWER LIGHT BACK LIGHT WHITE BALANCE EXPOSURE INPUT SELECT BACK LIGHT INPUT SELECT To switch to pictures from external input equipment, press the INPUT SELECT button. The INPUT SELECT indicator lights up, and pictures are output from the equipment connected to the RGB input terminal.
17 VIDEO OUT S VIDEO OUT RGB OUT RS-232C If you want to record using a VCR, connect the RE-450X to the VCR using a commercially available video cable. For details of operation, refer to the instruction manual for the equipment to be used.
18 E Functions Contr olled by a Computer The following functions can be controlled by a computer. For more information, please contact your dealer. Category Abbreviation Meaning Camera control Zoom le.
19 The fluorescent illumination lamps and backlight are consumables. Replace with a new lamp if a lamp starts flickering or becomes dark. For details of replacement, please consult your dealer. If the RE-450X does not function properly, check the following points before contacting your dealer.
20 E Signal output method Image device Effective pixels Synchronization Resolution Imaging speed Projection lens Projection range Zoom Focusing Iris adjustment (exposure) White balance Illumination la.
Een belangrijk punt na aankoop van elk apparaat Canon RE-450X (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon RE-450X heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon RE-450X vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon RE-450X leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon RE-450X krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon RE-450X bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon RE-450X kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon RE-450X . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.