Gebruiksaanwijzing /service van het product ZR70 MC van de fabrikant Canon
Ga naar pagina of 158
Digital Video Camcorder Instruction Manual Camescope vidéo numérique Manuel d’instruction Videocámara digital Manual de Instrucciones English Françai s Español Mini Digital Video Cassette NTSC This instruction manual covers the ZR70 MC, ZR65 MC and ZR60.
2 Introduction E Important Usage Instructions W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Digital Video Camcorder , ZR70 MC/ZR65 MC/ZR60 systems This device complies with Part 15 of the FCC Rules.
3 Introduction E IMPOR T ANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder ZR70 MC/ZR65 MC/ZR60 A and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated.
4 Introduction E 14. Lightning — For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and power -line surges.
5 Introduction E Reference Guide The following manuals are supplied with the camcorder: ❍ Digital Video Camcorder ZR70 MC/ZR65 MC/ZR60 Instruction Manual This manual explains the camcorder operations from basic video recording to the use of the full range of features.
6 Introduction E T able of Contents Introduction Reference Guide ..............................................................................................................5 Thank Y ou for Choosing a Canon ..........................................
7 Introduction Adjusting the AE Shift ..................................................................................................77 Setting the Shutter Speed ......................................................................................
8 Introduction Conventions Used in This Manual Operating Modes : ZR70 MC and ZR65 MC only . Available functions depend upon the operating mode. It is indicated as follows: : Function can be used in this mode. : Function cannot be used in this mode. Other Symbols and References ❍ : Reference page number .
9 Introduction E Thank Y ou for Choosing a Canon The Canon ZR70 MC/ZR65 MC/ZR60 provides a full range of options and functions. We recommend reading this manual thoroughly before you use the camcorder . It will help you to become more familiar with your camcorder , and learn how to operate it properly .
10 Introduction E Introducing the ZR70 MC/ZR65 MC/ZR60 Stabilizes your recordings even in long telephoto shots (in Camera mode). Allows recording even in dark places.
11 Introduction E Components Guide ZR70 MC/ZR65 MC/ZR60 P 1 2 3 4 5 6 7 8 9 D ATA CODE MIX/ SLIDE SHOW DIGIT AL EFFECTS ON/OFF REC (record) SEARCH – button (p. 35) / Record review button (p. 35) / (rewind) button (p. 37) / CARD – button* (p. 111) REC SEARCH + button (p.
12 Introduction E TAPE CARD OF F ( VC R ) P L A Y PLAY C A M E R A CAMERA P O W E R POWER CAMERA OFF PLAY(VCR) } Diopter adjustment lever (p. 20) Viewfinder protect cover (p. 142) PHOTO button (p. 55, 104) Advanced accessory shoe (p. 73) Accessory shoe (p.
13 Introduction E S DV AV MIC Bottom view Terminal cover : Assist lamp (White LED) (p. 59) Remote sensor (p. 24) Stereo microphone (p. 71) S-video IN/OUT terminal (p. 41) DV IN/OUT terminal (p. 87) Terminal cover OPEN/EJECT switch (p. 22) Tripod socket (p.
14 Introduction E WT WIRELESS CONTROLLER WL - D79 START /STOP PHOTO ZOOM SELF T. D.EFFECT. ON/OFF SET MENU TV SCREEN REW PAUSE AV INSERT AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT SEARCH SELECT DATA CODE AUDIO DUB. INDEX SLIDE SHOW CARD WIRELESS CONTROLLER WL - D80 SELF T.
15 Mastering the Basics E Using a Household Power Source Y ou can operate the camcorder from a household power source using the supplied power adapter . The power adapter converts current from a power outlet (100-240 V AC, 50/60 Hz) to the DC current used by the camcorder .
16 Mastering the Basics E Attaching and Charging the Batter y Pack Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message “CHANGE THE BA TTERY P ACK” appears. 1. T ur n the POWER switch to OFF .
17 Mastering the Basics Charging, Recording and Playback Time Below times are approximate and vary according to the charging, recording or playback conditions. Charging Time • Charge the battery pack in temperatures between 41º F and 104º F (5º C and 40º C).
How much power is left? The battery symbols indicate the charge status of the battery pack. When the battery pack is empty , “CHANGE THE BA TTERY P ACK” appears for 4 seconds and starts flashing. The battery charge indicators are not constant – they vary according to the condition under which battery pack and camcorder are used.
19 Mastering the Basics E Installing the Backup Batter y The backup battery allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source or with a battery pack when replacing the backup battery .
20 Mastering the Basics E Preparing the Camcor der Adjusting the Viewfinder (Diopter Adjustment) 1. T ur n on the camcorder and keep the LCD panel closed to adjust the viewfinder . 2. Adjust the diopter adjustment lever . Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of light by the lens).
21 Mastering the Basics E Attaching the Shoulder Strap For extra security and portability , attach the shoulder strap before using the camcorder . Pass the ends through the strap mount and adjust the length of the strap. Mounting the Wide Attachment The WA-30.
22 Mastering the Basics E Loading a Cassette Use only videocassettes marked with the D logo. Loading and Unloading 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover . The cassette compartment opens automatically . 2. Load/unload the cassette.
23 Mastering the Basics Protecting T apes from Accidental Erasur e T o protect your recordings from accidental erasure, slide the tab on the cassette to the left.
24 Mastering the Basics E Using the Wireless Contr oller Y ou can operate the camcorder with the supplied wireless controller from a distance of up to 16 feet (5 m).
25 Mastering the Basics E Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder . Install the backup battery before you begin ( 19). Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu.
26 Mastering the Basics E ❍ Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock.
27 Mastering the Basics 2. T ur n the selector dial to select [SYSTEM] and press the selector dial. 3. T ur n the selector dial to select [D/TIME SET] and press the selector dial. The year display starts to flash. 4. T ur n the selector dial to select the year , and press the selector dial.
28 Mastering the Basics E Recording Movies on a T ape Y ou can use the LCD screen or the viewfinder when recording. Before Y ou Begin Recording Make a test recording first to check if the camcorder operates correctly . Before you make important recordings, clean the video heads ( 142).
29 Mastering the Basics When Y ou Have Finished Recording 1. T ur n the POWER switch to OFF . 2. Close the LCD panel. 3. Replace the lens cap. 4. Unload the cassette. 5. Disconnect the power source. When recor ding outdoors or through a window , do not leave LCD screen, viewfinder or lens exposed to direct sunlight as it may cause damage.
30 Mastering the Basics E Zooming The camcorder’ s zoom lens allows you to choose the best picture angle for your recordings. The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom.
31 Mastering the Basics 5. Press the MENU button to close the menu. ❍ Keep at least 3.28 ft. (1m) to the subject. At wide-angle, you can focus on a subject as close as 0.
32 Mastering the Basics E Using the LCD Screen 1. Push the OPEN button at the LCD panel and open the LCD panel. The LCD screen switches on and the viewfinder switches off.
33 Mastering the Basics E Adjusting the Brightness of the LCD Screen 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T ur n the selector dial to select [BRIGHTNESS] and press the selector dial.
34 Mastering the Basics E 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [DISPLA Y SET UP] and press the selector dial. 3. T ur n the selector dial to select [LCD MIRROR] and press the selector dial. 4. T ur n the selector dial to select [OFF].
35 Mastering the Basics E Searching and Reviewing when Recor ding Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly . Press and r elease the c (record r eview) button.
36 Mastering the Basics E Tips for Making Better Videos Holding the Camcorder For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary , support the camcorder with your left hand.
37 Mastering the Basics E Playing Back a T ape When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker . The built-in speaker is monaural. Use headphones for stereo sound or when using the viewfinder for playback.
38 Mastering the Basics E Special Playback Modes Special playback modes (except of playback pause and fast/rewind playback) can only be operated with the wireless controller . e / a (Playback Pause) T o pause playback, press the e / a button. Press the e / a button to resume playback.
39 Mastering the Basics Playing Back with the Built-in Speaker/Headphones When using the built-in speaker , make sure that “ H ” is not displayed on the screen. When using the headphones, make sur e that “ H ” is displayed. Change the setting as necessary following the procedur e below .
40 Mastering the Basics E Adjusting the V olume *Headphone volume only . T ur n the selector dial up to increase the volume, and down to lower the volume. • A volume bar appears for 4 seconds. • Y ou can turn off the volume completely by turning the selector dial down until OFF appears.
41 Mastering the Basics E Playing Back on a TV Screen Y ou can connect the camcorder to a TV or VCR to play back your recordings on a TV screen. ❍ Make sure that “ H ” is not displayed on the scr een. If “ H ” is displayed, change the setting ( 39).
42 Mastering the Basics 3. Connect the STV -250N Stereo Video Cable to the camcorder’ s AV terminal and the audio terminals of the TV/VCR. Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red AUDIO terminal R (right).
43 Mastering the Basics Selecting the Audio Output Channel Y ou can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. T ur n the selector dial to select [AUDIO SET UP] and press the selector dial.
44 Using the Full Range of Features E Menus and Settings Many of the camcorder’ s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Set the camcorder to the correct operating mode. 2. Press the MENU button to open the menu.
45 Using the Full Range of Features E Menu and Default Settings Default settings are shown in boldface. CAMERA Menu (CAM. MENU) CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CARD MIX * 2 MIX TYPE CARD CHROMA , CARD LUMI.
46 Using the Full Range of Features E PLA Y (VCR) Menu (VCR MENU) CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options VCR SET UP REC MODE SP, LP 54 AV/PHONES AV , PHONES H 39 AV DV OUT ON, OFF 93 AUDIO SET UP OUTPUT CH L/R , L/L, R/R 43 AUDIO DUB.
47 Using the Full Range of Features E CARD CAMERA Menu (C. CAM. MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA ZR65 MC ZR70 MC Submenu Menu Item Setting Options CAMERA SET UP SHUTTER AUTO , 1/60, 1/100, 1/250 78 WHITE BAL.
48 Using the Full Range of Features E CARD PLA Y (VCR) Menu (C.PLA Y MENU) CARD PLA Y (VCR) CARD CAMERA PLA Y (VCR) CAMERA ZR65 MC ZR70 MC Submenu Menu Item Setting Options CARD COPY CANCEL , EXECUTE.
49 Using the Full Range of Features E Changing the Remote Sensor Mode T wo remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby . T urning the Remote Sensor Off Open the menu and select [SYSTEM].
50 Using the Full Range of Features E Customizing the Camcorder Y ou can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter*, start/stop and self-timer (collectively called the My Camera settings).
51 Using the Full Range of Features E Setting the Light-up Buttons The buttons above the LCD panel light up when the camcorder’ s power is on, or when you press a button.
52 Using the Full Range of Features E Other Camcorder Settings Beep Y ou will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, automatic shut-off, and unusual conditions of the camcorder . The beep will not be recorded.
53 Using the Full Range of Features Demonstration Mode The demonstration mode displays the camcorder’ s main features. It starts automatically when you leave the camcorder turned on without loading a cassette (ZR70 MC/ZR65 MC: and without inserting a memory card) for more than 5 minutes.
54 Using the Full Range of Features E Changing the Recording Mode (SP/LP) Y ou can choose from SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. ❍ T apes recorded in LP mode cannot be used for audio dubbing ( 96) or AV insert ( 94).
55 Using the Full Range of Features E Recording Still Images on the T ape Y ou can record still images on the tape. Starting your recording with a still image allows you to easily locate the beginning of the recording with the Photo Search function ( 85).
56 Using the Full Range of Features ❍ When you turn the POWER switch to OFF while the camcorder is recor ding the still image, it will not turn off until recor ding is complete. ❍ Record still images under suf ficient lighting condition (in which you can identify the subject on the screen).
57 Using the Full Range of Features E Using the Recording Pr ograms The camcorder is equipped with the Easy Recording program and several program AE modes. The availability of functions differs depending on the selected mode. A vailability of Functions in Each Mode: A: Auto setting h : A vailable × : Not available *1 ZR70 MC only .
58 Using the Full Range of Features E Sports Use this mode to record sports scenes (such as tennis or golf), moving objects (such as roller coasters) or when recording from a moving car . ❍ This mode is set at a high shutter speed and should therefor e be used in sufficient light.
59 Using the Full Range of Features Night Use this mode to record in dark places. The shutter speed is adjusted automatically . It is useful when recording in places with changing light conditions (such as in amusement parks). ❍ Night mode cannot be used in CARD CAMERA mode.
60 Using the Full Range of Features Selecting the Program AE Mode 1. Slide the program selector to Q (program AE). 2. Press the selector dial. A list of the program AE modes appears. 3. Select a mode and press the selector dial. The symbol of the mode appears on the upper left corner of the screen.
61 Using the Full Range of Features E Using Digital Effects Y ou can use the digital effects during recording and playback. Faders ( 62): Begin or end scenes with a fade to or from black.
62 Using the Full Range of Features Faders Fade T rigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) Jump (JUMP) Flip (FLIP) E The image gradually fades in. The image gradually fades out. The image begins as a vertical line in the center and expands sideways until it fills the whole screen.
63 Using the Full Range of Features E Puzzle (PUZZLE) Zigzag (ZIGZAG) Beam (BEAM) Tide (TIDE) The image appears in 16 pieces. The pieces move around until the puzzle is solved. The image is divided into 16 pieces. The pieces move around and disappear .
64 Using the Full Range of Features Selecting a Fader 1. In CAMERA mode, set the program selector to Q . 2. Press the DIGIT AL EFFECTS button. [D.EFFECTS | ], [F ADER], [EFFECT] and [MUL TI-S] appear . 3. Select [FADER]. 4. Select the fader option. 5.
65 Using the Full Range of Features E Effects Art (ART) The image becomes like a paint (solarization). Black and White (BLK & WHT) The image becomes black and white. Sepia (SEPIA) The image becomes monochrome with a brownish tint. Mosaic (MOSAIC) The image is blurred through enlarging the size of some pixels.
66 Using the Full Range of Features Selecting an Effect 1. Press the DIGIT AL EFFECTS button. [D.EFFECTS OFF], [F ADER], [EFFECT] and [MUL TI-S] appear . 2. Select [EFFECT]. 3. Select the effect. 4. Press the DIGIT AL EFFECTS button. The name of the selected effect flashes.
67 Using the Full Range of Features E Using the Multi-Image Screen The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time. Sound will be recorded normally . This feature can be used in CAMERA and PLA Y (VCR) mode.
68 Using the Full Range of Features Capturing 10 . Press the ON/OFF button. • MANUAL: Images will be captured each time you press the ON/OFF button. The blue frame indicating the next sequence disappears after the last image. T o cancel the last captured image, pr ess and hold the ON/OFF button.
69 Using the Full Range of Features E T ur ning Off the Image Stabilizer The image stabilizer allows you to obtain steady recordings even at telephoto.
70 Using the Full Range of Features E Recording With the Self-Timer 1. Press the (self-timer) button. “ ” appears. When recor ding movies 2. Press the start/stop button. The camcorder starts r ecording after a 10-second countdown (2 seconds when using the wireless contr oller).
71 Using the Full Range of Features E Audio Recording Changing the Audio Mode Y ou can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later .
72 Using the Full Range of Features ❍ Low sound may be reduced together with the wind noise. W e recommend turning off the wind screen for normal r ecordings. ❍ The wind screen function cannot be turned on/off during r ecording. ❍ The wind screen function can also be used for audio dubbing (when [AUDIO DUB.
73 Using the Full Range of Features E Using the VL-3 Video Light (Optional) This video light enables you to record brightly in color even in dark places. This VL-3 Video Light attaches to the camcorder’ s advanced accessory shoe for cable-free operation and is powered by the camcorder’ s power supply .
74 Using the Full Range of Features E Using the DM-50 Micr ophone (Optional) The high sensitive Directional Stereo Microphone DM-50 attaches to the advanced accessory shoe for cable-free operation and is powered by the camcorder’ s power supply . Use it for recording or dubbing audio.
75 Using the Full Range of Features E Adjusting the Focus Manually Some subjects may not be suitable for autofocus. In such case, focus manually . Autofocus may not work well on the following subjects: 1. Set the program selector to Q . 2. Adjust the zoom.
76 Using the Full Range of Features 5. Press the FOCUS button to return to autofocus. The setting resets to autofocus when you switch the pr ogram selector to [ . Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks.
77 Using the Full Range of Features E Adjusting the AE Shift Y ou can adjust the AE (auto exposure) function to lighten or darken the image. This allows you to compensate for backlit or overexposed scenes. Available Levels: –2 to +2, in 0.25 intervals (excluding –1.
78 Using the Full Range of Features E Setting the Shutter Speed In the Auto mode, you can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (AUTO) mode.
79 Using the Full Range of Features ❍ Guidelines for Recording with High Shutter Speeds: - Outdoor sports such as golf or tennis: 1/2000 - Moving objects such as cars or roller coasters: 1/1000, 1/5.
80 Using the Full Range of Features E Setting the White Balance The camcorder’ s auto white balance system adjusts the colors to appear natural for different lighting conditions. However , you can use the preset modes to reproduce colors more accurately , or set a custom white balance to obtain the optimal setting.
81 Using the Full Range of Features For T (Indoor) or U (Outdoor) Setting: 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SET UP]. 3. Select [WHITE BAL.]. 4. Select T (indoor) or U (outdoor). T or U appears. 5. Close the menu. For Custom White Balance: 1.
82 Using the Full Range of Features E Magnifying the Image The playback image can be magnified by 2 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. • A frame appears indicating the position of the enlarged part. 2. Move the image.
83 Using the Full Range of Features E Displaying the Data Code Once date and time are set, the camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). (ZR70 MC/ZR65 MC: Only date and time appear when playing back a memory card).
84 Using the Full Range of Features Selecting the Date/Time Display Combination Open the menu and select [DISPLA Y SET UP]. Select [D/TIME SEL.], set it to [DA TE] or [TIME] and close the menu. Selecting the Data Code Display Combination Open the menu and select [DISPLA Y SET UP].
85 Using the Full Range of Features E Photo Search/Date Sear ch Y ou can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. 1. Press the SEARCH SELECT button to choose between photo search and date sear ch.
86 Using the Full Range of Features E Retur ning to a Pr e-marked Position If you wish to return to a particular scene later , mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. 1. Press the ZERO SET MEMOR Y button at the point you wish to return to later .
87 Editing E Recording to a VCR or Digital V ideo Device Y ou can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality .
88 Editing Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. E Side with an arrow Commercially available DV cable Signal flow.
89 Editing E Recording fr om Analog Video Devices (VCR, TV or Camcorder) Y ou can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder . ❍ Anomalous signals sent from the connected device may be r ecorded as anomalous picture (although it may not appear so on the scr een), or it may not be recor ded at all.
90 Editing E Recording fr om Digital Video Devices (DV Dubbing) Y ou can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality . ❍ When recor ding from digital video devices, make sure that “A V DV” is not displayed on the screen.
91 Editing Copyright Signal Certain software tapes are copyright protected. If you attempt to play back such tape, “COPYRIGHT PROTECTED PLA YBACK IS RESTRICTED” appears and you will not be able to view the contents of the tape.
92 Editing E Converting Analog Signals into Digital Signals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder , you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal.
93 Editing T urning On the Analog-Digital Converter Press the A V DV button on the wireless controller . OR Open the menu and select [VCR SET UP]. Select [A V DV OUT], set it to [ON] and close the menu. ❍ For normal use, set [A V DV OUT] to [OFF] (so that “A V DV” does not appear on the screen).
94 Editing E Replacing Existing Scenes (A V Insert) Y ou can insert and replace images/audio on the tape of the camcorder with images/audio from other video devices connected via A V terminal or DV terminal. ❍ Make sure that “ H ” is not displayed on the scr een.
95 Editing Example: A V Insert from a VCR 1. Connect the camcorder to the VCR. See Playing Back on a TV Screen ( 41). 2. VCR: Load a recorded cassette. Locate the scene you wish to insert and pause playback shortly before the scene. 3. Set the camcorder to PLA Y (VCR) mode and load a recorded cassette.
96 Editing E Audio Dubbing Y ou can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). ❍ Use only tapes recor ded in SP mode 12-bit audio sound with this camcorder . Audio dubbing will stop if the tape has a blank section or a section recor ded in LP mode, 16-bit or 12-bit 4-channel sound.
97 Editing E Using a Microphone ❍ When using the built-in microphone: do not connect any cables to the microphone terminal or the accessory shoe. ❍ When using an external microphone: Connect it to the microphone terminal. ❍ When using the DM-50 Microphone: Do not connect any cables to the microphone terminal.
98 Editing E 7. Press the STOP 3 button on the wireless contr oller to stop dubbing. Audio device: Stop playback. Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.
99 Editing E Connecting to a Computer Using a DV (IEEE1394) Cable Y ou can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board (optional software required). ❍ Do not disconnect the DV cable, or turn off the camcorder or computer while data is being transferred to the computer .
100 Using a Memory Card ZR65 MC ZR70 MC E Inserting and Removing the Memor y Card The chapter Using a Memory Card ( 100-133) refers to functions of the ZR70 MC and ZR65 MC only . Y ou can use SD Memory Cards or a commercially available MultiMediaCards with this camcorder .
101 Using a Memory Card ZR65 MC ZR70 MC E Selecting the Image Quality/Size Changing the Still Image Quality Y ou can choose between Superfine, Fine and Normal. Open the menu and select [CARD SET UP]. Select [SI QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu.
102 Using a Memory Card ZR65 MC ZR70 MC E ❍ The indication may not decrease even though a r ecording has been made, or may decrease by 2 images at once. ❍ All indicators are displayed in gr een when a memory card is played back. ❍ The remaining image capacity indicates the number of still images, even when movies are r ecorded.
103 Using a Memory Card ZR65 MC ZR70 MC E T o change the setting, open the menu and select [CARD SET UP]. Select [FILE NOS.], set it to [RESET] and close the menu.
104 Using a Memory Card ZR65 MC ZR70 MC E Recording Still Images on a Memory Car d Y ou can record still images with the camcorder , from a tape in the camcorder ( 105), or from devices connected via the DV terminal or A V terminal ( 106).
105 Using a Memory Card ZR65 MC ZR70 MC Recording fr om a T ape in the Camcor der Y ou can record images from a tape in the camcorder as still images on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape. 3. Press the PHOTO button halfway when the scene you wish to recor d appears.
106 Using a Memory Card ZR65 MC ZR70 MC E Recording fr om Other Video Devices Y ou can record images from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. When recor ding via the AV terminal, make sur e that “A V DV” is displayed on the screen.
107 Using a Memory Card ZR65 MC ZR70 MC E Recording Panoramic Images (Stitch Assist Mode) Y ou can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer .
108 Using a Memory Card ZR65 MC ZR70 MC E ❍ Compose each image so that it overlaps 30 to 50% of the adjoining image. T ry to keep the vertical misalignment within 10%. ❍ Do not include moving subject in the overlapping portion. ❍ Do not try to stitch images that include both distant and close subjects.
109 Using a Memory Card ZR65 MC ZR70 MC E Recording Motion JPEG Movies on a Memory Card Y ou can record Motion JPEG movies with the camcorder , from a tape in the camcorder ( 110), or from devices connected via the AV terminal (analog line-in) or the DV terminal ( 110).
110 Using a Memory Card ZR65 MC ZR70 MC Recording fr om a T ape in the Camcor der Y ou can record movies from a tape in the camcorder on a memory card. 1. Set the camcorder to PLA Y (VCR) mode. 2. Play back the tape. 3. Press the start/stop button when the scene you wish to recor d appears.
111 Using a Memory Card ZR65 MC ZR70 MC E Playing Back a Memor y Car d Y ou can play back memory card images on the LCD screen, viewfinder screen, or on a connected TV screen (see Playing Back on a TV Screen ( 41) ). Y ou can display a single image (single image display 111), 6 at one time (index screen 112), or one after another (slide show 112).
112 Using a Memory Card ZR65 MC ZR70 MC E Index Screen 1. In single image display , press the (index screen) button. • Up to 6 images appear . • Movies are displayed with the first scene as a still image indicated by “ ”. 2. Press the CARD +/– button to change the image selection.
113 Using a Memory Card ZR65 MC ZR70 MC Card Jump Function Y ou can locate still images/movies without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images.
114 Using a Memory Card ZR65 MC ZR70 MC E Protecting Images Y ou can protect important images from accidental erasure during single image display or index screen display . If a memory card is formatted, all images, even pr otected ones, will be erased permanently .
115 Using a Memory Card ZR65 MC ZR70 MC E Erasing Images Y ou can erase images singly or all at once. Be careful when erasing images. Erased images cannot be r ecovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first or last scene is displayed as a still image.
116 Using a Memory Card ZR65 MC ZR70 MC E Selecting Still Images for Printing (Print Or der) Y ou can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards.
117 Using a Memory Card ZR65 MC ZR70 MC Erasing All Print Orders 1. In single image display , open the menu and select [CARD OPERA TIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear .
118 Using a Memory Card ZR65 MC ZR70 MC E Printing with the Direct Print Function Y ou can print still images by connecting the camcorder to a Canon Bubble Jet Printer with Direct Print function. The Direct Print function can also be used with the print order settings ( 116).
119 Using a Memory Card ZR65 MC ZR70 MC E Printing 1. In single image display , select the still image you wish to print and press the selector dial. The print setting menu appears. 2. Set the number of copies and the print style. • Selecting the Number of Copies .
120 Using a Memory Card ZR65 MC ZR70 MC E Selecting the paper size: 1. In the print setting menu, tur n the selector dial to select [Style] and press the selector dial. 2. Make sure that is selected and press the selector dial. 3. T ur n the selector dial to select the paper size and press the selector dial.
121 Using a Memory Card ZR65 MC ZR70 MC E Printing with Print Order Settings Y ou can print still images you have selected with the Print Order function. If you wish to print more than 1 copy , set the number of copies in the print order ( 116). 1. Connect the printer to the camcorder ( 118).
122 Using a Memory Card ZR65 MC ZR70 MC E Combining Images (Card Mix) Y ou can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording.
123 Using a Memory Card ZR65 MC ZR70 MC E Card Luminance Key (CARD LUMI.) Combines illustrations or title with your recordings. The live video recording will appear in place of the light area of the card mix image. Y ou can create your own title or illustration by drawing on a white paper and recording it to the memory card.
124 Using a Memory Card ZR65 MC ZR70 MC E Selecting the Card Mix Ef fect 1. Set the program selector to Q . 2. Open the menu and select [ CARD MIX]. The card mix menu appears. 3. Select the image you wish to combine with the CARD +/– button. 4. Select [MIX TYPE].
125 Using a Memory Card ZR65 MC ZR70 MC Recording with the Car d Mix Effect Movie: 1. Press the start/stop button to begin recor ding. The combined image is recor ded on the tape. 2. Press the start/stop button to end recor ding. Still Image: 1. Press the PHOTO button halfway .
126 Using a Memory Card ZR65 MC ZR70 MC E Copying Still Images Y ou can copy still images from tape to memory card, or from memory card to tape. ❍ All still images from the selected still image onwar d will be copied. ❍ The image size of a still image copied from tape to memory car d will be 640 × 480.
127 Using a Memory Card ZR65 MC ZR70 MC Copying Still Images from Memory Car d to T ape Load a cassette with enough free space, and insert a recorded memory card. Make sure that the protect tab on the cassette is set to allow recording. 1. Select the first still image you wish to copy with the CARD +/– buttons.
128 Using a Memory Card ZR65 MC ZR70 MC E Formatting a Memor y Card Format new memory cards, or when you get the message “CARD ERROR”. Y ou can also format a memory card to erase all images recorded on it. The camcorder formats memory cards in the Design rule for Camera File system (DCF) standard.
129 Using a Memory Card ZR65 MC ZR70 MC E Connecting to a Computer Using a USB Cable Y ou can download images from the memory card to a computer using the supplied USB cable. With the supplied software, you can easily download, browse and archive images, and arrange still images for printout.
130 Using a Memory Card ZR65 MC ZR70 MC E Creating a Start-up Image Y ou can create a start-up image using a still image on the memory card or a sample start-up image provided on the DIGIT AL VIDEO SOLUTION DISK and save it as [MY IMAGE]. ❍ Make sure to insert a memory car d with enough remaining capacity .
131 Using a Memory Card ZR65 MC ZR70 MC E Memory Card Information Images recorded on a memory card with this camcorder can be transferred to a computer using the following products for SD Memory Cards or MultiMediaCards: PC Card Adapter: An adapter to insert a memory card into the card slot on the computer .
132 Using a Memory Card ZR65 MC ZR70 MC Sample Images 27 sample images are pre-recorded on the supplied SD Memory Card: 8 card chroma key images, 5 card luminance key images, 2 camera chroma key images and 12 card animation images.
133 Using a Memory Card ZR65 MC ZR70 MC The sample images recor ded on the supplied SD Memory Card are intended only for the personal use with this camcorder .
134 Additional Information E Screen Displays LCD Screen Displays Y ou can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLA Y SET UP]. Select [DISPLA YS], set it to [OFF <PLA YBK>] and close the menu.
135 Additional Information Screen Displays during Basic Recor ding/Playback indicates flashing. CAMERA mode (battery pack attached): • Remote sensor mode and audio mode disappear after 4 seconds. PLA Y (VCR) mode: • Remote sensor mode and volume bar disappear after 4 seconds.
136 Additional Information E Screen Displays during Advanced Recor ding/Playback CAMERA Mode * ZR70 MC 1/100 CARD MIX FADE–T 1 2 bit 16:9 1 sec PHOTO WS ON 12:00 PM JAN.
137 Additional Information E CARD CAMERA Mode * ZR70 MC ZR65 MC ZR70 MC 50 1024 320 1/100 1 2 CLOSE 12:00 PM JAN.1,2003 T W 0 AE MF S.FINE Accessory attached to the Advanced Accessory shoe* ( 73) Stil.
138 Additional Information E List of Messages Message Explanation You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack.
139 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred.
140 Additional Information E Direct Print Related Messages ZR65 MC ZR70 MC Message Explanation Paper cassette is not correctly inserted or is out of paper. The paper jammed during printing. The ink cartridge is not inserted or is out of ink. The printer is experiencing a data transmission error.
141 Additional Information E Maintenance Camcorder Handling Pr ecautions ❍ Do not carry the camcorder by the LCD panel or viewfinder . ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car , and high humidity .
142 Additional Information ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Viewfinder ❍ Rotate the viewfinder upward. Remove the protect cover and clean the glass with a cotton swab.
143 Additional Information E Condensation Moving the camcorder rapidly between hot and cold temperature may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder .
144 Additional Information E Using the Camcorder Abr oad Power Sources Y ou can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Center for information on plug adapters for overseas use.
145 Additional Information E T roubleshooting If you have a problem with your camcorder , refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Recording/Playback Problem Cause Solution Battery pack is exhausted.
146 Additional Information Recording Playback E Problem Cause Solution Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end ( flashes on the screen).
147 Additional Information E Memory Card Operation ZR65 MC ZR70 MC Problem Cause Solution Memory card was not facing the correct direction. Memory card is full. Memory card is not formatted. Memory card is not inserted. File number reached maximum value.
148 Additional Information E System Diagram (A vailability differs from ar ea to area) MultiMediaCard IFC-300PCU USB Cable Bubble Jet Printer with direct print function PC Card Adapter USB Reader/Writ.
149 Additional Information E Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. Y ou can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center .
150 Additional Information E WD-30.5 Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. FS-30.5U Filter Set Neutral density and MC protector filters help you to control difficult lighting conditions.
151 Additional Information E SC-1000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. SC-A50 Soft Carrying Case This lightweight bag keeps the camcorder within easy reach without weighing you down or getting in the way .
152 Additional Information E Specifications ZR70 MC/ZR65 MC/ZR60 7.4 V DC 2.9 W (Using viewfinder), 3.8 W (Using LCD screen) EIA standard (525 lines, 60 fields) NTSC color signal 2 rotary heads, helic.
153 Additional Information E Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 32 – 104˚F (0 – 40˚C) 1.3 × 0.94 × 0.08 in. (32 × 24 × 2.
154 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 98 16:9 wide screen . . . . . . . . . . . . . . 52 6-second auto date . . . . . . . . . . . . 84 Abroad, using the camcorder . . . 144 Accessories. . . . . . . . . . . .
155 Additional Information E Menus . . . . . . . . . . . . . . . . . . . . . . 44 Microphone . . . . . . . . . . . . . . . . . . 71 MIC terminal . . . . . . . . . . . . . . . . . 71 Movie size * 1 . . . . . . . . . . . . . . . . 102 MultiMediaCard * 2 .
156 Additional Information E CANON ® ZR70 MC/ZR65 MC/ZR60 DIGIT AL VIDEO CAMCORDER LIMITED W ARRANTY The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon ZR70 MC/ ZR65 MC/ZR60 Digital Video Camcorder (“DV Camcorder”) pur chased and used in the United States.
157 Additional Information E CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED W ARRANTY The limited warranty set forth below is given by Canon Canada Inc.
CANON INC. U.S.A. CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92618 USA CANON U.
Een belangrijk punt na aankoop van elk apparaat Canon ZR70 MC (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Canon ZR70 MC heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Canon ZR70 MC vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Canon ZR70 MC leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Canon ZR70 MC krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Canon ZR70 MC bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Canon ZR70 MC kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Canon ZR70 MC . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.