Gebruiksaanwijzing /service van het product L 75670 FL van de fabrikant AEG
Ga naar pagina of 36
L 75270 FL L 75470 FL L 75670 FL WASHING MACHINE USER MANUAL.
SERVICE When contacting Service, ensure that you have the followin g data available . The information can be found on the rating plate. Model PNC Serial Number The following symbols are used in this user manual: Warning - Importan t Safety information.
FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it.
SAFETY INFORMATION Before the installatio n and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to a different person.
internal components and cause leak- ages or malfunctions. • Do not install and connect a dam - aged appliance. • Make sure to remove all packaging and transport bolts. • Make sure that the mains plug is dis- connected from the mains socket during installation.
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol . Put the packaging in applicable con- tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less water and energy, obey these instructions: • Set a programme without the pre- wash phase to wash laundry with nor- mal soil.
TECHNICAL INFORMATION Dimensions Width / Height / Depth 605 / 850 / 605 mm Total depth 640 mm Electrical connection: Voltage Overall power Fuse Frequency 230-240 V 2200 W 10 A 50 Hz Level of protectio.
PRODUCT DESCRIPTION 1 2 3 8 9 5 6 7 4 10 11 12 1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump 7 Feet for the appliance level 8 Water drain hose 9 Water in let val ve 10 Mains cable 11 Transit bolts 12 Feet for the appliance level ACCESSORIES 1 2 3 4 1 Spanner To remove the tran sit bolts.
CONTROL PANEL Cottons + Prewash Extra Silent Synthetics + Prewash Easy Iron Delicates W ool/Silk Economy 20 Min. - 3 kg Quick Intensive Jeans Curtains Super Eco Rinse Spin/Drain On/Off Te m p .
C • The display symbols. 2) Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. If the programme is completed but the s ymbol stays on: • There is water in the drum.
EXTRA RINSE BUTTON 7 Press button 7 to add rinsing phases to a programme. Use this function for persons allergic to detergents and in areas where the wa- ter is soft. STAIN BUTTON 8 Press button 8 to add the stain phase to a programme. Use this function for laundry with hard stains to remove.
PROGRAMMES Programme Temperature Type of load max. weight of load Cycle description Functions Cottons 95° - Cold White and coloured cotton with normal soil. max. 7 kg Wash Rinses Long spin SPIN REDUCTION RINSE HOLD STAIN EXTRA RINSE TIME SAVE 1) Cottons + pre- wash 95° - Cold White and coloured cotton with heavy soil.
Programme Temperature Type of load max. weight of load Cycle description Functions Spin / Drain 3) All fabrics The maximum load of the laundry is rela- ted to the t ype of laundry. Drainage of the water Spin phase at the maximum speed. SPIN REDUCTION NO SPIN Rinse Hand was hed items.
3) The default phase of the spin speed is related to cotton items. Set the spin speed. Make sure that it agrees with the laundry. 4) Set this function to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 5) Set this programme to decrease the time and the consumption of energy and water.
BEFORE FIRST USE 1. To activate the drain system, put 2 litre of water in the main wash com- partment of the detergent dispens- er. 2. Put a small quantity of detergent in the main wash com partment of the detergent dispenser. Set and start a programme for cott on at the highest temperature without laun- dry.
FILLING THE DETERGENT AND ADDIT IVES The detergent compartment for the prewas h phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, pu t it immediately before you start the programme.
3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap.
CHANGE A FUNCTION You can change only some functions before they operate. 1. Press button 4 . The indicator flashes. 2. Change the function set. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours.
To drain the water: 1. If necessary, decrease the spin speed. 2. Press th e Start/ Pause bu tton 4 . The appliance drain the water and spin. 3. When the programme is comple- ted and the door lock symbol goes off, you can open the door 4. Deactivate the appliance.
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. • Some coloured items can discolour with the first wash.
Water hardne ss table Level Type Water hardness °dH °T.H. mmol/l Clarke 1 soft 0-7 0-15 0-1.5 0-9 2 mediu m 8-14 16-25 1.6-2. 5 10-16 3 hard 15-21 26-37 2.
CARE AND CLEANING WARNING! Disconnect the appliance from the mains supply before you clean it. DESCALING The water we use contains limescale. If it becomes necessary, use a water soft- ener to remove limescales. Use a special product made for wash- ing machines.
DETERGENT DISPENSER To clean the d ispenser : 1 2 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid additive compartment. 4. Clean all the pa rts with wat er. 5. Clean the dispenser recess with a brush. 6. Put back the dispenser in the re- cess.
To clean t he drain pump : 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of the drain pump to co llect the water that flows out. 4. Press the two levers and pull for- ward the drainage duct to let the water flow out .
1 2 9. Clean the filter under the water tap and put i t back in t he pump into the sp ecia l guid es. 10. Make sure that you tighten correct- ly the filter to prevent leakages.
When you drain the water with the emergency drain procedure, you m ust activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the deter- gent dispenser.
TROUBLESHOOTING The start of the appliance does n ot oc- cur or it stops d uring operation. First try to find a solution to the prob- lem (refer to the table). If not, contact the service centre. With some prob lems, the acou stic signals operate and the display shows an alarm code: • - The appliance does not fill with water.
Problem Possible cause Possible solution The anti-flood de- vice is on. • Disconnect the appliance. • Close the water tap. • Contact the serv ice centre. The spin phase does not operate. The spin phase is off. Set the spin programme. The filter of the drain pump is blocked.
Problem Possible cause Possible solution The appliance fills with water and drain immediately. The end of the drain hose is too low. Make sure that the drain hose is in the correct position. The washing re- sults are not satis- facto ry. The detergent you used was not sufficient or cor- rect.
INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum.
6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses. 1 2 7. Remove the polystyrene protection from the bottom. 8. Pull up the appliance in vertical po- sition.
12. Replace the pla stic spacers w ith the plastic caps. You can find these caps in the user manual bag. WARNING! Remove all the packaging and the transit bolts before you in- stall the appliance. We recommend that you keep the packaging and the transit bolts for when you move the ap- pliance.
Installation on a not hard floor When you install the appliance on a not hard floor (wooden planks floor), put a rigid support plinth under the appli- ance feet to prevent the noise and the vibration. Assemble the pli nth with a waterp roof wood panel (min.
Water-stop device A The inlet hose has a wa ter stop device. This device prevents water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault . If this occur, close the water tap and contact the service centre to replace the hose.
• If the end of th e drain hose is this (see the drawing), you can push it di- rectly into the stand pipe. Without the plastic h ose guide. •T o a s i n k s p i g o t . Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip.
www.aeg.com/shop 132939750-A-112011.
Een belangrijk punt na aankoop van elk apparaat AEG L 75670 FL (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AEG L 75670 FL heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AEG L 75670 FL vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AEG L 75670 FL leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AEG L 75670 FL krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AEG L 75670 FL bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AEG L 75670 FL kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AEG L 75670 FL . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
