Gebruiksaanwijzing /service van het product 78-16019-02 van de fabrikant Cisco Systems
Ga naar pagina of 32
CHAPTER 3-1 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 3 Initial Configuration This chapter describes how to conf igure the Cisco ONS 15530 so it can be accessed by other devices.
3-2 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Starting Up the Cisco ONS 15530 The CPU switch module provides a slot on the front panel that accommodates a CompactFlash card.
3-3 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Passwords Modem Support The auxiliary port of the Cisco ONS 15530 provides modem connection support. The follo wing settings on the modem are required: • Enable auto answer mode.
3-4 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface Configuring IP Acces.
3-5 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface The Cisco ONS 15530 NME interface should no w be operating correctly .
3-6 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring the Host Name Example Switch# show interfaces fastethernet 0 FastEthernet0 is up, line protocol is up Hardware is AmdFE, address is 0000.
3-7 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About NTP Note The host name is also synchronized with the standby CPU switch module. The host name prompt on the standby CPU switch module appears with “sby-” as a pref ix.
3-8 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring NTP implementation allows a machine to be conf igured so that it acts as though it is synchronized using NTP , when in fact it has determined the time using other means.
3-9 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring Security Features The.
3-10 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features method you hav e implemented) in the form of accounting records. Each accounting record contains accounting attribute-v alue (A V) pairs and is stored on the security serv er .
3-11 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring TACACS+ T o conf igure your router to support T A CACS+, perform the follo wing tasks: Step 1 Use the aaa new-model global conf iguration command to enable AAA.
3-12 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Refer to the “Conf iguring Passwords and Pri vileges” part in the Cisco IOS Security Conf iguration Guide .
3-13 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Figure 3-1 shows the v alid hardware transition states for a system with redundant CPU switch modules.
3-14 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Redundant Operation Requirements For fully redundant operation, the follo wing requirements must be met: • T wo CPU switch modules are required.
3-15 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy • The acti ve CPU switch module f ails.
3-16 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Forcing a Switchover from ROM Monitor Mode Y ou can manually force the standby CPU switch module to take ov er as the active CPU switch module R OM monitor mode.
3-17 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Autoboot .
3-18 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The follo win.
3-19 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The following.
3-20 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Maintenance Mode Y ou can conf igure the Cisco ONS 15530 to enter the redundancy maintenance mode.
3-21 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Examples The followin.
3-22 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy The follo wing exampl.
3-23 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy deviation_numbers_str.
3-24 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Privilege.
3-25 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Example The followin.
3-26 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register • Enable booting from a TFTP server • Recov er a lost password • Boot the system manually using the boot command at the bootstrap program prompt.
3-27 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Bit 12 and bit 11 in the conf iguration register determine the data transmission rate of the console terminal.
3-28 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register T able 3-7 describes the v alues for the boot f ield.
3-29 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Changing the Software Configuration Register Changing the Soft.
3-30 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Fan Failure Shutdown About Fan Failure Shutdown The Cisco ONS 15530 fan assembly is located at the bottom of the chassis and contains six indi vidual fans and a fan controller board.
3-31 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown Displaying the Fan Tray Failu.
3-32 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 78-16019-02 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 78-16019-02 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 78-16019-02 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 78-16019-02 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 78-16019-02 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 78-16019-02 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 78-16019-02 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 78-16019-02 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
