Gebruiksaanwijzing /service van het product NI-1 van de fabrikant Cisco Systems
Ga naar pagina of 28
C HAPTER 6-1 Cisco Provis ioning Cent er User’s Guid e 78-11339-01 6 Configuring the Cisco NI-1 DLSAM Equipment Module The Cisco 6100/6130 NI-1 DSLAM Equ ipment Module supports provisioning of cross connections on Cisco 6100/6130 NI-1 DSL access co ncentrators.
6-2 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Supported Equipment • Subtended N etwork Configuration. Allo ws up to se ven Cisco 6100/6130 chassis t o be linked to a sin gle W AN trunk.
6-3 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Summary of Configuration Tasks Note In order to conf igure the NI-1 DLSA M Equipment Module you must ha ve installed it during the CPC Serv er and Client inst allation procedures.
6-4 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Step 4 Run the follo wing commands in succession to source the Server en vironment and start the CPC Server: cd /opt/SY/Activator/Server/mng/utility .
6-5 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Before You Upload: Creating a Network Object One network object must be crea ted for each network. The follo win g steps explain ho w to create a network object.
6-6 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Creating a Node Object Y ou should create node objects for all Cisco 6100/6130 nodes in t he network. The foll ow ing steps explain ho w to create a node object.
6-7 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload T ransit Cost This is the cost of crossing the sub-network. Thi s attrib ute is used by the Threader to determine the lo west cost path when threading a service.
6-8 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Network Upload Uploading the Fabric and Servi ce Elements fo.
6-9 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Initial System Upload Uploading the Fabric Elem ents for a Network Object Gi ven that the network obj ect is in place, you can no w upload fabric.
6-10 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Re-Upload Uploading the Fabric Elements for a Node Object After you create a node object, you may want to upload just the f abric elements for that node.
6-11 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Logical Ports T o re-upload y ou need to upload the f abric and Serv ice elements for t hat node.
6-12 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Naming Logical Ports Deleting Logical Ports Deleting an A TM logical port will d elete an agent subscr iber from the Cisco 610 0/6130.
6-13 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Working with Service Element Profiles Service element prof iles provide you with access to th e Cisco-specif ic attributes for a particular Serv ice element.
6-14 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Step 4 Sav e and apply the pr ofile ob ject by cli cking the Sa ve an d A pply butto ns on the toolbar .
6-15 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Figure 6-1 Cisco 61 0 0/6130 DSL Phys ica.
6-16 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T able 6-4 lists the configurabl e attribut es for a Cisco 6100/ 6130 DSL physical p ort prof ile.
6-17 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Cisco 6100/6130 Modem Card Ty p e The modem card type (line card type) that contai ns this physical port CAP ADSL, DMT2ADSL, 2B1QSDSL CAP ADSL Modem Card Subtype The modem card subtype.
6-18 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles T raining Mode The training mode for the ph ysical port. In standard mode, the modem attempts to train us ing the method specifi ed by T1.
6-19 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles A TU-C CAP CPE Signature This attribut e specif ies a CPE software signature (w hich corresponds to a speci fic v e rsion).
6-20 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Reed Solomon Reed Solomo n erro r encoding can be config ured for the A TU-C running in CAP mode.
6-21 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM Logical Port Profile Attributes The A TM logical port prof ile provides you with acce ss to the A TM attributes that you can configure for an A TM logical port.
6-22 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-2 Cisco 61 0 0/6130 A TM Logi cal P or t Pr ofile Object V i ewer T able 6-5 lists the configurabl e attrib utes for a Cisco 6100/ 6130 A TM logical port prof ile.
6-23 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles Administrati ve Status Specify the administrativ e status of the logical port.
6-24 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Multiple Ranges Specify whether or not to enable or disable mult iple ranges. TR UE, F ALSE F ALSE EMS Name The name of the logical port used in the Element Management System.
6-25 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles ATM-ATM Cross Connection Service Element .
6-26 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles Figure 6-3 C isco 61 00/61 30 A TM-A TM Cr .
6-27 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working wit h Service Elem ent Profiles T able 6-6 lists the configurabl e attribut es for a Cisco 6100/613 0 A TM-A T M cross connections.
6-28 Cisco Provisioning C enter User’s Guide 78-11339-01 Chapter 6 Configuring the Cisco NI-1 DLSAM Equipment Module Working with Service Element Profiles A to Z, Z to A Directions Bandwidth (kbits/ s) The bandwidth for the cr oss connection.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems NI-1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems NI-1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems NI-1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems NI-1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems NI-1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems NI-1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems NI-1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems NI-1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
