Gebruiksaanwijzing /service van het product VRX6671Z van de fabrikant Clarion
Ga naar pagina of 39
VRX667 1z All Rights Reserved. Copyright © 2000: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en Chine / 2000/2 (IT·K) QC-6700B 280-7362-30 Clarion Co., Ltd. Owner’ s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación 6.
2 VRX6671z VRX6671z xx Contents 1. PRECAUTIONS ...................................... 4 W ARNING..............................................4 INFORMA TION FOR USERS.....................4 2. CONTROLS ............................................5 3. NOMENCLA TURE .
1. PRECAUTIONS 1. When the inside of the car is very cold and the player is used soon after switching on the heater , moisture ma y form on the disc (CD/ MD) or the optical parts of the player and proper playback may not be possible. If mois- ture forms on the disc (CD/MD), wipe it off with a soft cloth.
5 VRX6671z 6 VRX6671z VRX6671z 7 3. NOMENCLA TURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “ 2. CONTROLS ” on page 5 (unfold).
VRX6671z 9 RADIO mode display COLOR LCD DISPLA Y INFORMA TION P ANEL MAIN SUB.
10 VRX6671z CD/MD Changer mode display COLOR LCD DISPLA Y INFORMA TION P ANEL SUB MAIN.
VRX6671z 11 TV mode display COLOR LCD DISPLA Y INFORMA TION P ANEL SUB MAIN.
12 VRX6671z Inserting the Batteries 1. T urn the remote control unit over , then slide the rear cover in the direction of the arro w . 2. Inser t the AA (SUM-3, IECR-6/1.5V) batter- ies that came with the remote control unit facing in the directions shown in the figure, then close the rear cov er .
VRX6671z 13 Switches among Radio , CD changer , MD changer and TV . Functions of Remote Control Unit Buttons Notes: • The remote control unit does not work when the panel is closed. • Some of the corresponding buttons on the main unit and remote control unit ha ve diff erent functions.
14 VRX6671z 6. DCP 2. Lock the DCP/Operation Panel at the upper center until a click is heard. 3. Press the power button 1 to turn on the power . CAUTION • The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
VRX6671z 15 7. CAUTIONS ON HANDLING LCD panel/Generalities • Be sure to store the LCD panel inside the main unit when parking the car outdoors for long period of time. The LCD panel will oper- ate properly in a temperature range of 0 to 60 ° C. • Don’t allow any liquids on the set from drinks, umbrellas etc.
16 VRX6671z 8. OPERA TIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “ 2. CONTROLS ” on page 5 (unfold). CAUTION When the unit is turned on, starting and stop- ping the engine with its volume raised to the maximum level may harm your hearings.
VRX6671z 17 Basic Operations • If a title has been input, it is shown in the SUB dis- play . If no title has been input, “ --------- ” appears in the display . T o input a title , refer to the subsection “ Entering titles ” in “ Other Functions ” section.
18 VRX6671z Basic Operations When the panel is closed: Each time you press the Z-EHCR button 9 , the tone eff ect changes in the follo wing order : “ Z-EHCR 1 ” ➜ “ Z-EHCR 2 ” ➜ “ Z-EHCR 3 ” ➜ “ Z-EHCR OFF ” ➜ “ Z-EHCR 1 ” .
VRX6671z 19 T urning on/off the loudness The loudness effect emphasiz es the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness eff ect. ∗ This function is enabled only when the panel is open.
20 VRX6671z 2. Press the right or left side of SEARCH button 2 to automatically seek a station. When the right side of SEARCH button 2 is pressed, the station is sought in the direction of higher frequencies; if the left side of SEARCH button 2 is pressed, the station is sought in the direction of lower frequencies.
VRX6671z 21 Manual memory 1. Press the BAND button % and select the de- sired band. (FM or AM) 2. Select the desired station with seek tuning, manual tuning, or preset tuning. 3. Press and hold one of the PRESET buttons # for 2 seconds or longer to store the cur- rent station into preset memory .
22 VRX6671z CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press the FUNC button 1 and select the CD changer mode to star t pla y .
VRX6671z 23 Fast-forward/Fast-backward ● Fast-forward Press and hold the right side of the SEARCH button 2 f or 1 second or longer . ● Fast-backward Press and hold the left side of the SEARCH but- ton 2 for 1 second or longer . T op function The top function plays from the first track (track No.
24 VRX6671z MD Changer Operations MD changer functions When an optional MD changer is connected through the CeNET cable, this unit controls all MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press the FUNC button 1 and select the MD changer mode to star t pla y .
VRX6671z 25 Scan play The scan play locates and plays the first 10 sec- onds of each track on a disc automatically . This function continues on the disc until it is cancelled or the mode is changed. ∗ The scan play is useful when you want to select a desired track.
26 VRX6671z TV Operations TV functions When an optional TV tuner is connected through the CeNET cable , this unit controls all TV tuner functions. T o w atch TV requires a TV tuner . For your saf ety , the driver should not watch the TV or operate the controls while driv- ing.
VRX6671z 27 Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the PRESET buttons # for 2 seconds or longer to store the cur- rent station to that preset memory . Auto store A uto store selects 6 TV stations automatically and stores each one into a preset memory .
28 VRX6671z TV Operations Adjusting the brightness and tone of color Notes: • This operation is av ailable only when the car is stopped and the parking brake is applied. • This function is not availab le when the display is stored. • The HUE setting can be adjusted only when the NTSC mode is selected.
VRX6671z 29 Rear Vision Camera Monitoring the rear vision camera The rear vision camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CAA-147). Notes: • This function is not av ailable when the displa y is stored.
30 VRX6671z Other Functions Always turning on the button illumination on the operation panel Note: • The follo wing operation is enabled when the panel is open. The button illumination on the operation panel when the display is turned upward, can be switched between “ ON ” and “ OFF ” .
VRX6671z 31 Other Functions Clock Adjustment 1. Press the ADJ button * to display the ad- justment selection displa y . 2. Move the JOYSTICK ¡ up or down to select CLOCK, then press ENT at the center of the JOYSTICK ¡ to display the clock adjustment displa y .
32 VRX6671z DSP operations DSP control function If the DSP (DPH7500z), sold separately , is con- nected to this unit using the CeNET cable, all the functions of the DSP can be controlled. ∗ When the DSP is connected, an external ampli- fier is required.
VRX6671z 33 4. After adjustment (setting), operate the JO Y - STICK ¡ rightward or leftward to move the cursor to “ MENU ” and press the ENT at the center of the JOYSTICK ¡ to return to the adjustment selection display . 5. Press the ADJ button * again to return to the ST ANDARD displa y .
34 VRX6671z Easy mode/G.EQ operations Note: • The adjustment made in easy mode is not reflected in the adjustment in professional mode. Respec- tively , the adjustment made in prof essional mode is not reflected in the adjustment in easy mode. G.EQ effect ON/OFF ∗ The factory default setting is “ ON ” .
VRX6671z 35 8. Operate the JOYSTICK ¡ rightward or left- ward to select “ MENU ” and press the ENT at the center of the JOYSTICK ¡ to change into the A UDIO-MODE display . Easy mode/DSP operations DSP effect ON/OFF ∗ The factory default setting is “ ON ” .
36 VRX6671z 7. T o set a title of the stored USER pattern, op- erate the JOYSTICK ¡ rightward or leftward to select “ TITLE ” and press the ENT at the center of the JOYSTICK ¡ to change into the Title Input displa y . ∗ For title inputting method, refer to the section “ Entering titles ” .
VRX6671z 37 P1 to P6, and press the ENT at the center of the JO YSTICK ¡ to call corresponding P .EQ patter n. In this display , pressing the No. but- ton in correspondence to the PRESET buttons # can also call the P .
38 VRX6671z ∗ By pressing the PRESET buttons # 1 to 6 for 2 seconds or longer in the P .EQ adjusting dis- pla y , the P .EQ pattern can be stored in the USER memory .
VRX6671z 39 9. IN CASE OF DIFFICUL TY Power does not turn on. (No sound is produced.) Nothing happens when buttons are pressed. Display is not accurate. The remote controller does not work. The image is not displayed. The display is dark. The color of the display is light or a shade of color is not good.
40 VRX6671z When the TV tuner is con- nected, the image gets unclear . The TV tuner has a double or triple image. The TV tuner has spots or stripes in the image.
VRX6671z 41 ERROR 2 ERROR 3 ERROR 6 ERROR 2 ERROR 3 ERROR 6 ERROR H ERROR 2 ERROR 3 ERROR 6 10. ERR OR DISPLA YS If an error occurs, one of the f ollo wing displa ys is displa y ed. T ake the measures described to eliminate the problem. If an error display other than the ones described above appears, press the RESET button.
42 VRX6671z 11. SPECIFICA TIONS FM T uner Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50dB Quieting Sensitivity: 17 dBf Alternate Channel Selecitivity: 75 dB Stereo Separation(1 .
VRX6671z 43 1. BEFORE ST ARTING..................................................43 2. P ACKA GE CONTENTS...............................................43 3. GENERAL CAUTIONS................................................44 4. CA UTIONS ON INST ALLA TION.
Een belangrijk punt na aankoop van elk apparaat Clarion VRX6671Z (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Clarion VRX6671Z heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Clarion VRX6671Z vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Clarion VRX6671Z leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Clarion VRX6671Z krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Clarion VRX6671Z bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Clarion VRX6671Z kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Clarion VRX6671Z . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
