Gebruiksaanwijzing /service van het product TA0.1 van de fabrikant Clark Synthesis
Ga naar pagina of 28
Owner ’ s Manual T A0.1 Amplier with Wired Remote Company Overview W arranty Safety Instructions Product Introduction Unpacking Y our Amplier Product Overview Setting Up Y our Amplier Opera.
www .clarksynthesis.com T A0.1 Amplier 2 COMP ANY O VER VIEW Thank you for purchasing a Clark Synthesis T actile Sound Amplier! We are condent this product will be a welcome addition to your audio system.
T A0.1 Amplier 3 www .clarksynthesis.com WARRANTY United States W ar ranty and Retur n P olicy T A0.1 CLARK SYNTHESIS AMPLIFIER WARRANTY Clark Synthesis, Inc. warranties the T A0.1 Amplier to be free from defects and workmanship under normal use for a period of two (2) years from date of original purchase.
www .clarksynthesis.com T A0.1 Amplier 4 SAFETY INSTR UCTIONS READ THESE INSTRUCTIONS. 1. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. 2. HEED ALL WARNINGS. 3. FOLLO W ALL INSTRUCTIONS. 4. DO NO T USE THIS AMPLIFIER NEAR WA TER. 5. CLEAN ONL Y WITH A DR Y CLO TH.
T A0.1 Amplier 5 www .clarksynthesis.com PR ODUCT INTRODUCTION OVERVIEW OF THE AMPLIFIER The T A0.1 amplier is designed exclusively for use with Clark Synthesis transducers. This amplier incorporates the latest digital technology and provides features not available on many ampliers.
www .clarksynthesis.com T A0.1 Amplier 6 UNP A CKING Y OUR AMPLIFIER P ACKA GE CONTENTS Please remove the amplier and accessories from the carton.
T A0.1 Amplier 7 www .clarksynthesis.com PR ODUCT O VER VIEW AC Panel V entilation Remote Control Input/Output Panel V ents.
www .clarksynthesis.com T A0.1 Amplier 8 PR ODUCT O VER VIEW Gain (V olume) Control On/Auto/Off Switch Power Indicator Light Low Pass/Bypass Switch Crossover (X-Over) Control R emote Contr ol Over .
T A0.1 Amplier 9 www .clarksynthesis.com PR ODUCT O VER VIEW R emote Contr ol Over view GAIN (V OLUME) CONTR OL The Gain (V olume) Control on the face of the T A0.1 amplier controls the degree to which the input signal is amplied. The gain level, combined with the level of the input signal, determines the actual volume output.
www .clarksynthesis.com T A0.1 Amplier 10 PR ODUCT O VER VIEW Audio Input/Output Connectors T ransducer Connector High/Low Input Signal Switch Input/Output P anel Ov er view.
T A0.1 Amplier 11 www .clarksynthesis.com PR ODUCT O VER VIEW Input/Output P anel Ov er view A UDIO INPUT/OUTPUT CONNECT ORS The Audio Input/Output Connectors accept standard RCA plugs. These connectors are split into Left and Right channels, as indicated by L and R on the panel.
www .clarksynthesis.com T A0.1 Amplier 12 PR ODUCT O VER VIEW A C P anel Ov er view Remote Control Wire Connector AC Power Cord Connector (IEC-601) AC PO WER CORD CONNECT OR (IEC-601) The AC Power Cord Connector is an adaptable connector that allows users to connect IEC-601 compatible AC cords to the amplier .
T A0.1 Amplier 13 www .clarksynthesis.com The following instructions are a quick overview of the steps necessary to install your new amplier . For more detailed instructions, please refer to the sections in the manual that are referenced below .
www .clarksynthesis.com T A0.1 Amplier 14 SETTING UP Y OUR AMPLIFIER The T A0.1 can be custom mounted for use in a variety of applications. By utilizing the pre-drilled holes in the mounting plate .
T A0.1 Amplier 15 www .clarksynthesis.com SETTING UP Y OUR AMPLIFIER CAUTION: Before connecting any wires or input/output lines, insure all equipment is off and no signals are being sent from the input device.
www .clarksynthesis.com T A0.1 Amplier 16 SETTING UP Y OUR AMPLIFIER HOME THEA TER There are several different ways to hook up your system in terms of which source material (signal) is delivered to the amplier(s) and transducer(s).
T A0.1 Amplier 17 www .clarksynthesis.com Right Front (RF) and Left Front (LF) Hookup For this hookup, connect the RF and LF Pre-Amp Outputs to the T A0.1 amplier inputs. NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs.
www .clarksynthesis.com T A0.1 Amplier 18 SETTING UP Y OUR AMPLIFIER If you are able to locate the amplier within 3 feet of the transducer (3 ft. is the approximate length of the speaker wire attached to the transducer), connect the transducer wires directly to the amplier .
T A0.1 Amplier 19 www .clarksynthesis.com SETTING UP Y OUR AMPLIFIER The T A0.1 has powered loop-through. This feature enables the user to take the signal from an audio source and pass it to a series of T A0.1 ampliers in order to drive multiple transducers.
www .clarksynthesis.com T A0.1 Amplier 20 OPERA TING Y OUR AMPLIFIER For Home Theater installations, once you have properly set up your amplier , it is important to take time to balance the transducer and subwoofer sound.
T A0.1 Amplier 21 www .clarksynthesis.com OPERA TING Y OUR AMPLIFIER If you are using the LFE/SUB signal as your input for the transducer , insure the 4. Low Pass/Bypass Switch is set to “Low Pass” (see photo #4) and the Crossover Control on the T A0.
www .clarksynthesis.com T A0.1 Amplier 22 SPECIFICA TIONS General Power Supply ................................................................................................................100 – 240 V AC, 50/60 Hz, Auto • Standby Current (1 10 V AC / 220 V AC).
T A0.1 Amplier 23 www .clarksynthesis.com TR OUBLESHOO TING Symptom T roubleshooting Question Remedy No Power Is the power cord plugged into the wall? Plug the power cord into the wall. Is the power cord plugged into the back of the amplier? Plug the power cord into the back of the amplier .
www .clarksynthesis.com T A0.1 Amplier 24 GL OSSAR Y OF TERMS T erm Denition Audio Input/Output Connectors Audio connectors on the amplier that receive or transmit the main signal.
T A0.1 Amplier 25 www .clarksynthesis.com GL OSSAR Y OF TERMS T erm Denition On/Auto/Off Switch The switch next to the Crossover Control that allows the user to place the amplier into Auto On/Standby mode, On, or Off.
www .clarksynthesis.com T A0.1 Amplier 26 INDEX Symbols 5-Way binding post 5, 18 A AC Panel 12 AC Power Cord Connector 5, 12 Audio Input/Output Connectors 10, 11, 13, 16, 17, 19, 24 B Balancing 13 .
T A0.1 Amplier 27 www .clarksynthesis.com INDEX M Mixer 17 Mounting 14 Multiple Signal Hookup 17 O On/Auto/Off Switch 5, 9, 11, 13, 15, 20, 21, 23 P Package Contents 6 Power Indicator (LED) 8, 9 Po.
www .clarksynthesis.com www .clarksynthesis.com 06/2008 V er. 1 ©2008 Clark Synthesis, Inc. For additional questions/concerns/issues, contact Clark Synthesis or visit our web site. Phone: 1-800-898-1945 Fax: 303-797-7501 Web: www .clarksynthesis.com Email: info@clarksynthesis.
Een belangrijk punt na aankoop van elk apparaat Clark Synthesis TA0.1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Clark Synthesis TA0.1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Clark Synthesis TA0.1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Clark Synthesis TA0.1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Clark Synthesis TA0.1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Clark Synthesis TA0.1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Clark Synthesis TA0.1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Clark Synthesis TA0.1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
