Gebruiksaanwijzing /service van het product DR-17P van de fabrikant AG Neovo
Ga naar pagina of 46
.
T ABLE OF CONTENTS 2 Safety Information ............................................................................................................4 FCC Declaimers ......................................................................................
3 T ABLE OF CONTENTS Chapter 5: Adjusting the Settings ...................................................................................29 5.1 Brightness Setting .......................................................................................
SAFETY INFORMA TION 4 This FCC Class-B compliant digital device complies with the Interference-Causing Equipment Regulations of Canada. FCC Declaimers This device complies with Section 15 of the FCC listing.
5 SAFETY INFORMA TION WEEE Information for users applicable in European Union countries. The symbol on the product or its packaging signies that this product has to be disposed separately from ordinary household wastes at its end of life.
6 SAFETY INFORMA TION Recommended separation distances between portable and mobile RF communications equipment and the model DR-17P The model DR-17P is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
7 PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information.
8 PRECAUTIONS Cautions When Using Use only the power cord supplied with the LCD display . The power outlet should be installed near the LCD display and be easily accessible. If an extension cord is used with the LCD display , ensure that the total current consumption plugged into the power outlet does not exceed the ampere rating.
9 PRECAUTIONS Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time.
10 PRECAUTIONS Notice for the LCD Display Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country . W ARNING – Do not modify this equipment without authorization of the manufacturer .
1 1 CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer . User manual Power cord Note: ♦ The pictures are for reference only .
12 PRODUCT DESCRIPTION 1.2 W all Mounting Installation Preparation 1.2.1 W all Mounting 1 Remove the base stand. See procedures below . 2 W all mount the LCD display . Screw the mounting bracket to the VESA holes at the rear of the LCD display . 1.2.2 Removing the Base Stand 1 Lay the LCD display face down on a at even surface.
13 PRODUCT DESCRIPTION 1.3 LCD Display Overview 1.3.1 Front View and Keypad Buttons Display screen The LCD display screen is protected by NeoV TM Optical Glass. Green - Power on Amber - Standby mode Off - Power of f SOURCE • Press repeatedly to select the input signal source.
14 PRODUCT DESCRIPTION 1.3.2 Rear View DC power input Use to connect the power cord. COMPOSITE Video input connector Use to connect a composite cable for CVBS input signal. VGA connector Use to connect a PC using a VGA cable for analogue input signal.
15 CHAPTER 2: MAKING CONNECTIONS 2.1 Connecting the Power 1 Connect the power cord to the power adapter . 2 Connect the power adapter to the DC power input at the rear of the LCD display . 3 Connect the power cord plug to a power outlet or a power supply .
16 MAKING CONNECTIONS 2.2 Connecting Input Source Signals 2.2.1 Connecting a Computer Using VGA Cables Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub connector of the computer .
17 MAKING CONNECTIONS Connecting an Audio Device Connect one end of an audio cable to the audio port at the rear of the LCD display and the other end to the audio out port of the computer .
18 MAKING CONNECTIONS S-VIDEO or Using S-Video Cables Connect one end of an S-Video cable to the S-VIDEO connector of the LCD display and the other end to the S-VIDEO connector of your device. For audio input, connect an RCA cable to the audio in connector of the LCD display and the audio out connector of your device.
19 CHAPTER 3: USING THE LCD DISPLA Y 3.1 T urning on the Power POWER button / LED indicator 1 Plug the power cord to a power outlet or power supply . 2 T ouch the POWER button to turn the LCD display on. The LED indicator turns GREEN. When the LCD display is turned on, touch the POWER button to turn off the LCD display .
20 USING THE LCD DISPLA Y 3.3 Adjusting the V olume / Illuminator Function Hot Key VOLUME buttons 3.4 Locking the OSD Menu Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the keypad.
21 USING THE LCD DISPLA Y 3.5 Using Picture-in-Picture (PIP) The Picture-in-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display . 3.5.1 PIP Options T ouch the button repeatedly to enable and scroll among the PIP options.
22 USING THE LCD DISPLA Y 3.5.2 PIP Swap The main and the sub source signals set in PIP Setting can be easily swapped using the keypad. Main source Sub source T ouch the button to swap the main source and the sub source signals. See illustration below .
23 USING THE LCD DISPLA Y 3.7 Using Auto Adjustment Function Auto Adjustment function automatically tunes the LCD display to its optimal setting, including horizontal position, vertical position, clock, and phase. T ouch the button to perform auto adjustment.
CHAPTER 4: ON SCREEN DISPLA Y MENU 24 4.1 Using the OSD Menu Operation 1 Display the main menu screen. E X I T E N T E R S E L E C T 1 2 8 0 x 1 0 2 4 7 5 H z B R I G H T N E S S 5 0 C O N T R A S T 5.
25 ON SCREEN DISPLA Y MENU Note: Availability of some menu items depend on the input source signal. If the menu is not available, it is disabled and grayed out.
26 ON SCREEN DISPLA Y MENU 4.2 OSD Menu T ree Main Menu Submenu Remarks 1. Brightness • Brightness • Contrast • Black Level (for video only) See page 29. 2. Colour Setting • Colour T emperature • Auto Colour (for VGA only) See page 30. 3. Image Setting During PC input signal (for VGA only): • Sharpness • Phase • Clock • H.
27 ON SCREEN DISPLA Y MENU Main Menu Submenu Remarks Image Setting During V ideo input signal: • Sharpness • Saturation • T int • 3D Comb Filter • Noise Reduction • Aspect Ratio • H. Zoom • V . Zoom • H. Position • V . Position See page 32.
28 ON SCREEN DISPLA Y MENU Main Menu Submenu Remarks 10. Language Select the OSD language: EN / FR / DE / ES / IT / PY / RO / PL / CS / NL / TC / SC 1 1. Information Displays settings information such as Input, Resolution, Horizontal and V ertical Frequency , T ime mode, and Firmware version.
29 CHAPTER 5: ADJUSTING THE LCD DISPLA Y 5.1 Brightness Setting E X I T A D J U S T S E L E C T B R I G H T N E S S 5 0 C O N T R A S T 5 0 B R I G H T N E S S C O L O U R S E T T I N G I M A G E S E .
30 ADJUSTING THE LCD DISPLA Y 5.2 Colour Setting E X I T S E L E C T C O L O U R T E M P . 1 2 8 R 1 2 7 G 1 0 6 B 6 5 0 0 K 5 4 0 0 K 9 3 0 0 K s R G B A U T O C O L O U R U S E R E N T E R B R I G H.
31 ADJUSTING THE LCD DISPLA Y 5.3 Image Setting (VGA only) Note: During DVI input source signal, Image Setting is disabled and grayed out. B R I G H T N E S S C O L O U R S E T T I N G I M A G E S E T.
32 ADJUSTING THE LCD DISPLA Y 5.4 Image Setting (V ideo signals) E X I T A D J U S T S E L E C T C O N T R A S T S A T U R A T I O N 5 0 S H A R P N E S S 5 0 T I N T 5 0 3 D C O M B F I L T E R N O I S E R E D U C T I O N O N O F F O F F L O W H I G H V .
33 ADJUSTING THE LCD DISPLA Y Item Function Operation Range / V alue Aspect Ration Adjusts the aspect ratio of the screen image. T ouch the or buttons to select the value. Overscan Underscan Native Aspect Ratio can be set to: • OVERSCAN - The aspect ratio increases by 5%.
34 ADJUSTING THE LCD DISPLA Y 5.5 PIP Setting E X I T A D J U S T S E L E C T P I P O F F P I P P A P M A I N S O U R C E V G A D V I C V B S S - V I D E O S U B S O U R C E V G A D V I C V B S S - V .
35 ADJUSTING THE LCD DISPLA Y Item Function Operation Range / V alue Sub Pic. Size (Sub Picture Size) Allows you to select the size of the sub source image. Available only in PIP mode. • 1 - Small image size. • 2 - Medium image size. • 3 - Large image size.
36 ADJUSTING THE LCD DISPLA Y 5.6 OSD Setting E X I T A D J U S T S E L E C T H . P O S I T I O N 5 0 T R A N S P A R E N C Y 5 0 V . P O S I T I O N 5 0 O S D T I M E R 1 0 0 B R I G H T N E S S C O .
37 ADJUSTING THE LCD DISPLA Y 5.7 Audio Setting E X I T A D J U S T S E L E C T V O L U M E 5 0 A U D I O O N O F F D V I S O U R C E P C V I D E O B R I G H T N E S S C O L O U R S E T T I N G I M A .
38 ADJUSTING THE LCD DISPLA Y 5.8 Other Setting E X I T A D J U S T S E L E C T M O D E G R A P H P O W E R S A V I N G O N O F F O N O F F D C R R E C A L L P R E S S T E X T B R I G H T N E S S C O .
39 ADJUSTING THE LCD DISPLA Y Item Function Operation Range / V alue DCR (Dynamic Contrast Ratio) Activates DCR. This feature provides automatic adjustment of picture brightness and contrast at high speed and dynamic contrast range, such as when watching movies.
40 ADJUSTING THE LCD DISPLA Y 5.9 Auto Brightness 5.9.1 EcoSmart Sensor With the built-in EcoSmart sensor , users can enable the Auto Brightness feature to automatically adjust the LCD screen brightness according to the ambient light. This feature comforts the eyes and helps optimise energy efciency .
41 ADJUSTING THE LCD DISPLA Y 5.10 Input Select D V I P R E S S V G A P R E S S C V B S P R E S S S - V I D E O P R E S S E X I T E N T E R S E L E C T B R I G H T N E S S C O L O U R S E T T I N G I .
CHAPTER 6: APPENDIX 42 6.1 W arning Messages W arning Messages Cause Solution I N P U T S I G N A L O U T O F R A N G E The resolution or the refresh rate of the graphics card of the computer is set too high. • Change the resolution or the refresh rate of the graphics card.
43 APPENDIX 6.2 T roubleshooting Problem Possible Cause and Solution No picture. • LED indicator is OFF . • Check if the LCD display is turned ON. • Check if the power cord is properly connected to the LCD display . • Check if the power cord is plugged into the power outlet.
44 APPENDIX 6.3 T ransporting the LCD Display T o transport the LCD display for repair or shipment, place the display in its original packaging carton. 1 Place the two foam cushions on each side of the LCD display for protection. 2 Place the LCD display down in the box.
45 CHAPTER 7: SPECIFICA TIONS 7.1 Display Specications DR-17P Panel Panel Size 17” Max. Resolution SXGA 1280 x 1024 Frequency (H/V) H: 24 kHz - 82 kHz V : 50 Hz - 76 Hz @ 1280x1024 / 75Hz Power Power T ype External DC 24V , 1.
46 SPECIFICA TIONS 7.2 Display Dimensions 3 6 1 . 7 m m 2 7 8 m m 2 4 0 m m 1 7 2 m m 4 0 9 . 2 m m 6 9 . 5 m m 1 0 0 m m 3 7 m m 7 5 m m 1 0 0 m m 7 5 m m Company Address: 5F-1, No.
Een belangrijk punt na aankoop van elk apparaat AG Neovo DR-17P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AG Neovo DR-17P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AG Neovo DR-17P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AG Neovo DR-17P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AG Neovo DR-17P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AG Neovo DR-17P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AG Neovo DR-17P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AG Neovo DR-17P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
