Gebruiksaanwijzing /service van het product 315.11726 van de fabrikant Craftsman
Ga naar pagina of 18
Operator's Manual [CRRFTSMRNq Belt Sander Double Insulated Model No. 315.117260 Save this manual for future reference. _, WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
• Warranty ................................................................................................................................................................... 2 • Introduction .......................................................
,_ WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Mainte- nance section of this manual.
-- = m Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
Bett Size ........................................................................................ 3 in. X 21 in. (76 mm X 533mm) Sanding Surface ........................................................................................................ 16.
INSTRUCTIONS Your belt sander has been shipped completely assembled. • Carefully remove the tool and the accessories from the box. • Make sure that all items listed in the packing list are included. • Inspect the tool carefully to be sure no breakage or damage occurred during shipping.
Before using the belt sander, familiarize yourself with all operating features andsafety requirements. However, do not let familiarity withthetoolmake youcareless. _ WARNING: Exercise caution when using the belt sander. Careless actions, for even a fraction of a second, can result in serious personal injury.
DUST COLLECTION BAG REAR HANDLE FRONT HANDLE TENSION RELEASE LEVER SANDING BELT LOCK-ON BUTTON TRACKING KNOB TRIGGER SWITCH BLOWER EXHAUST HOLE Fig. 1 9.
,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, chips, or loose particles being thrown in your eyes resulting in possible serious injury. If the operation is dusty, also wear a face or dust mask.
TO ADJUST SANDING BELT TRACKING See Figures 5 and 6. Belt life is greatly increased if you regularly adjust the sanding belt tracking. When correctly adjusted, the outer edge of the sanding belt should be even with the outer edge of the base of the sander.
USINGTHE DUST COLLECTION BAG The dust collection bagprovides a dust collection system forthe sander. _lt WARNING" Donotuse the dust collection bag when sanding metal. Using the dust collection bag when sanding metal creates a fire hazard, which could damage the tool and lead to serious personal injury.
LOCKINGON THE SANDER See Figure 8. The lock-on feature allows you to lock the trigger switch in the On position. Locking the trigger switch on allows you to operate the sander for extended periods of time.
PROPER HAND PLACEMENT See Figure 10. For ease of operation and maintaining proper control, the sander has a front handle and a rear handle. These handles allow two-handed operation, which aids in maintaining control, keeping the sanding area level with the workpiece, and keeping hands clear of the sanding belt.
,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. ,_ WARNING: The belt sander should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use.
-- CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117260 -- SEE NOTE 8 5 10 14 4 9 3 Note: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Sears repair center.
-- CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117260 -- I The model number wilt be found on a plate attached to the motor housing. Always mention the model ! number in all correspondence regarding your BELT SANDER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key Part No.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Een belangrijk punt na aankoop van elk apparaat Craftsman 315.11726 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Craftsman 315.11726 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Craftsman 315.11726 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Craftsman 315.11726 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Craftsman 315.11726 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Craftsman 315.11726 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Craftsman 315.11726 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Craftsman 315.11726 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
