Gebruiksaanwijzing /service van het product 486.24504 van de fabrikant Craftsman
Ga naar pagina of 28
Operators Manual CRAFI".SHAN+ I H.P. SOFT TOP SYSTEM AND CART Model No. 486.24504 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions.
WARRANTY ............................................................... 2 SAFETY RULES ........................................................ 3 ACCESSORIES AND ATTACHMENTS ................... 5 FULL SIZE HARDWARE CHART .............................
Any power equipment can cause injury if operated improperly or if the user doesnot understand howto operate the equipment. Exercise caution at all times, when using power equipment. • Read and follow all instructions in this manual before attempting to assemble or operate this equipment.
TO AVOID SERIOUS INJURY • Read Owner's Manual and all safety labels on machine before starting and using machine. • Do Not remove top cover or attempt to empty contents of cart while engine is running. • Do Not stand behind cart in exhaust discharge area while engine is running.
These accessories were available when the unit was purchased. They are also available at most Sears retail outlets and service centers. Most Sears stores can order repair parts for you when you provide the model numbers of your tractor and Vac System.
A jT jU I I SHOWN FULL SIZE N J W J X Y I BB _J J CC NOT SHOWN FULL SIZE DD EE J 6.
ATTENTION! Keep contents of each hardware package separate for easier assembly. Ref. Qty. Description CONTENTS OF LARGE VAC HARDWARE PACKAGE A 3 Bolt, Hex 3/8" x 3" B 2 Shoulder Bolt C 1 Hex.
jl 3 _18 19 6 J 10 J 11 22 _ 29 25 J 31 j21 33 CARTON CONTENTS Ref. Qty. Description 1 1 Cover 2 2 Top Connecting Tube 3 2 Support Tube, R.H. 4 2 Support Tube, L.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel andengine oil recommendations. TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver (1) Pliers (1) 3/8" Wrench (2) 7/16" Wrenches (2) 1/2" Wrenches (2) 9/16" Wrenches (1) 3/4" Wrench - (2) if hitch plate in fig.
• Pull the cartbody halves together. • Tightenthe four truss head bolts. Tightenthe six hex bolts in the sides of the cart. Tightenthe three hex bolts in the bottom of the cart, keeping the bottom aligned.
Assemble a spacer tube ontoeach end of the axle as shown in figure 7. Assemble a 1"flatwasher, a wheel (valve stem facing out), andanother 1"flatwasher onto the axle as shown in figure 7. Secure the wheel witha 1/8" x 1-1/2" cotter pin, spreading the ends so thata hub cap wilt fit over the pin.
Assemble the reduced ends of the R.H. support tubes into the ends of the L.H. support tubes. Fasten the tubes together using two 1/4" x 1"curved head bolts, inserted from the top,andtwo 1/4" (SEMS) hex nuts. See figure 11. 1/4" x 1" CURVED HEAD BOLT "_ I / 1/4" HEX NUT (SEMS) SUPPORT TUBE L.
• Assemble a plastic wheel to each engine mount bracket using a 3/8" shoulder bolt and 3/8" hex lock nut. See Figure 14. 3/8"SHOULDER FIGURE 14 Attach the vac tongue to your tractor's draw bar for easier mounting of the engine base assembly.
• Place the hose hanger rod assembly down into the hose hanger bracket on the impeller housing assem- bly. See figure 18. • Loop the 25" tarp strap under the hose.
ASSEMBLING THE #62468 DECK ADAPTER TO THE MOWER DECK NOTE: Not all of the parts in the deck adapter hardware package will be used for any one particular fit up. • Remove the mower discharge deflector from your mower deck. Save the deflector and hardware for remounting deflector.
• Assemble the adapter bracket to the deck using two 5/16" x 1" hex bolts, 5/16" flat washers and 5/16" hex lock nuts. See figure 25. NOTE: It may be necessary to use extra 5/16" flat washers to shim under the bracket next to the deck surface.
FOR 1990 AND NEWER MURRAY TRACTORS WITH A 46" DECK Tape 46" template onto deck adapter. Mark and then cut out adapter. Fasten the angle bracket and the mounting bracket to the mower deck as shown in figure 34. Use two 5/16" x 3/4" carriage bolts, 5/16" flat washers and 5/16" lock nuts.
KNOW YOUR VAC SYSTEM Read this owner's manual and safety rules before operating your Vac System. Compare the illustration below with your Vac System to familiarize yourself with the various controls and their locations.
HOW TO START YOUR VAC SYSTEM _, ARNING: Never start or run the engine without all covers being properly attached to the blower housing and cart. • Check oil and gas in Vac engine. • Attach spark plug wire to spark plug. • Move choke lever on engine to CHOKE position.
CUSTOMER RESPONSIBILITIES • Read and follow the maintenance schedule and the maintenance procedures listed in this section. MAINTENANCE SCHEDULE _e_&_ _,o_ e Fill in dates as you ,_ e_-_e_ complete regular service.
• Clean the engine and the entire unit thoroughly. • Refer to engine manual for correct engine storage instructions. • If storing in an unventilated or metal storage shed, coat metal parts withlight oil or silicone to prevent rust. • Store unit in a clean, dry area.
REPAIR PARTS FOR MODEL 486.24504 CART BODY 11 8 10 8 5 9 i 13 17 27 19 16 12 32 / 12 / 23 24 --_ REF. NO. ) ) i PART NO. 24096 62457 23487 24497 24984 43594 43093 43601 48637 43014 43866 46978 1509-69 HA20186 43814 23490 46980 QTY. REF. PART DESCRIPTION NO.
REPAIR PARTS FOR MODEL 486.24504 VAC SYSTEM IMPELLER HOUSING ASSEMBLY REF NO. PART QTY. DESCRIPTION NO. 1 629-0241A 1 Harness, Wire 2 24634 1 Housing Ass'y.
REPAIR pARTS FOR MODEL 486.24504 VAC SYSTEM j_ f J 23 45 22 j 18 ADAPTER #62466 8_ 27 12_ 32 13 / J 27 13 12 / 4O J S 27 37 39 9 19 19 14 16 24.
REPAIR PARTS FOR MODEL 486.24504 VAC SYSTEM REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3O 31 32 PART NO. 734-0973 24957 24956 43182 43063 43085 738-0373 430.
26.
O e= 'o e- e= o O • -, e= ;'_== _ o_ == _.=o 0 ._.._o .E_o_ ,0.,., ,m =1 ,,,c ,- e- _o, _ _ "r-E5 _ _ 0 _o-_ | CAUTION: Do not operate your tractor and Vac System on a slope in excess of 10 degrees. Be sure of your tractor's towing and braking capabilities before operating on a slope.
Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anyt,me, day or n,ght (1-800-469-4663) www.
Een belangrijk punt na aankoop van elk apparaat Craftsman 486.24504 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Craftsman 486.24504 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Craftsman 486.24504 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Craftsman 486.24504 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Craftsman 486.24504 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Craftsman 486.24504 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Craftsman 486.24504 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Craftsman 486.24504 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.