Gebruiksaanwijzing /service van het product 917.270732 van de fabrikant Craftsman
Ga naar pagina of 60
Owner's Manual I CRIIFTSMIIH°i 17 HP ELECTRIC START 42" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR Model No. 917.270732 • Safety • Assembly • Operation • Maintenance • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment.
Warranty ............................................... 2 Safety Rules ......................................... 3 Product Specifications .......................... 5 Assembly .............................................. 7 Operation ...............
IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION • Read, understand, and follow all instructions in the manual and on the machine before starting.
• Keep children out of the mowing area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and when backing, look behind and down for small children. • Never carry children.
A, Look for this symbol to point out impor- tant safety precautions. It means CAU- TION!!! BECOME AWARE!!! YOUR SAFETY IS INVOLVED. _,CAUTION: In order to prevent acciden- tal starting when setting up, transporting, adjusting or making repairs always dis- connect spark plug wire and place wire where it cannot contact spark plug.
Steering Wheel Insert C? [_(1) Hex Bolt 3/8-16 x 1 Steering Boot Steering Wheel (1) Lock washer 3/8 (1) Locknut 5/16-18 _ Steering Wheel Adapter (1) Large Flat Washer (1) Hex Bolt 5/16-18 x 1-1/4 t St.
Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
Battery Door Terminal INSTALL SEAT Adjust seat before tightening adjustment knob. • Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor. • Pivot seat upward and remove from the cardboard packing.
INSTALL MULCHER PLATE (If previously removed) • Raise and hold deflector shield in upright position. • Place front of mulcher plate over front of mower deck opening and slide into place, as shown. • Hook front latch into hole on front of mower deck.
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR WARNING REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF OIL P.
KNOWYOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
For healthier and better looking lawns, mow often and after moderate growth. • For best cutting performance, grass over 6 inches in height should be mowed twice.
BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL • The engine in your tractor has been shipped, from the factory, already filled with summer weight oil. • Check engine oil with tractor on level ground. • Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level.
COLD WEATHER STARTING ( 50 ° F and below) • When engine starts, allow engine to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depend- ing on the temperature.
MAINTENANCE SCHEDULE _____ _/_j*'_ AS YOU COMPLETE /__..._'_, _'_ _'_._y .EGU R SEOV,CE DATES li //// IF Check Brake _perati°n _ _ Check Tire Pressure Check Operator Presence and .
TRACTOR Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See 'q-O ADJUST BRAKE" in the Service and Adjustments section of this manual).
BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open.
ENGINE COOLING FINS Remove any dust, dirt or oil from engine cooling fins to prevent engine damage from overheating. • Remove screws from blower housing and lift housing and dipstick tube assembly off engine. • Cover oil fill opening to prevent entry of dirt.
CLEANING i Clean engine, battery, seat, finish, etc. of all foreign matter. Keep finished surfaces and wheels free of all _]asoline, oil, etc. • Protect painted surfaces with automo- tive type wax.
TO LEVEL MOWER HOUSING Adjust the mower while tractor is parked on level ground or driveway. Make sure bres are properly inflated (See =PROD- UCT SPECIFICATIONS" section of this manual). If tires are over or underinflated, you will not properly adjust your mower.
TO REPLACE MOWER BLADE DRIVE BELT The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. BELT REMOVAL - • Remove mower from tractor (See "TO REMOVE MOWER" in this section of this manual).
NOTE: When the tractor rear wheels move freely, the transaxle is in neutral. • Loosen adjustment bolt in front of the right rear wheel. • Position the gear shift lever in the neutral (N) position.
REPLACING BATTERY ACAUTION: Do not shod battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,rings,etc. Positive terminal must be connected first to prevent sparking from accidental grounding.
• Check that holes "A" in governor control lever and hole in governor plate line-up. If holes "A" are not aligned, loosen clamp screw and move throttle cable until holes are aligned.
Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. _ CAUTION: Never store the tractor w_th gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.
TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Will not start Hard to start Engine will not turn over • Out of fuel. • Engine not "CHOKED" properly. • Engine flooded. • Bad spark plug. • Dirty air filter. • Dirty fuel filter, • Water in fuel.
TROUBLESHOOTING CHART PROBLEM CAUSE Engine clicks but • Weak or dead battery. will not start • Corroded battery terminals. • Loose or damaged wiring.
TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Poor cut- uneven • Worn, bent or loose blade. Mower blades will not rotate Poor grass discharge Headlight(s) not working (if so equipped) • Mower deck not level. • Buildup of grass, leaves, and trash under mower.
TROUBLESHOOTING CHART PROBLEM Battery will not charge Engine "backfires" • when turning engine "OFF" CAUSE • Bad battery cell(s). • Poor cable connections. • Faulty regulator (if so equipped). • Faulty alternator. Engine throttle control not set at "SLOW" position for 30 seconds before stopping engine.
SCHEMATIC TRACTOR -- MODEL NUMBER 917.270732 BATTERY AMMETER OPTIONAL) )G AI( IGNITION SWITCH IGNITION SWITCH ! D k _.mTE i '© ( _A_ME NT CLUTCH SU_K (CLUTCH OFF) SEAT SWITCH (NOT OCCUPIED) A (OPTIONAL) '_ SPARK _ _GNIT_ON _ PLUG = FUELt UNIT GAP PLUGS ON I _UE i "[WIN CYL.
TRACTOR -- MODEL NUMBER 917.270732 ELECTRICAL 42 ? L 41 I I I :?2.
TRACTOR -- MODEL NUMBER 917.270732 ELECTRICAL KEY PART NO. NO. DESCRIPTION 1 144925 Battery 2 74760412 Bolt Hex Hd 1/4-20unc x 3/4 8 156417 Case Battery 16 153664 Switch, Interlock 21 166181 Harness A.
TRACTOR - - MODEL NUMBER 917.270732 CHASSIS AND ENCLOSURES 53 2O8 54 12 74 2O8 34.
I HA_ | gl'l - - MUIJI-L NUMI'I_.H _11/.2/U/_2 CHASSIS AND ENCLOSURES KEY PART NO. NO. DESCRIPTION 1 16983O 2 169061 3 17060612 5 155272 9 168337X013 10 STD533710 11 155927 12 145660 13 1721.
TRACTOR -.. MODEL NUMBER 917.270732 GROUND DRIVE 36.
TRACTOR - - MODEL NUMBER 917.270732 GROUND DRIVE KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 ........ Transaxle (See Breakdown) 62 8883R Cover, Pedal Peerless 206-545C 63 140186 Pulley.
TRACTOR -- MODEL NUMBER 917.270732 STEERING ASSEMBLY 62 ,+ i | b 27 17 / 29 _l 2g 15 15 47 64& 67 67 67 13 43 / I I / I $ 38.
I M/._t., I UM - - MUUI:L FIUMUP,.H 911.2/U/'32 STEERING ASSEMBLY KEY PART NO. NO. DESCRIPTION 1 139768 2 154427 3 169840 4 169839 5 6266H 6 121748X 7 19272016 8 12000029 9 3366R 10 169832 11 STD.
ENGINE TRACTOR - - MODEL NUMBER 917.270732 I 29 OPTIONAL EQUIPMENT Spark Arrester 72 62 81 38 76 13 4 23 l' 4O.
ENGINE TRACTOR - - MODEL NUMBER 917.270732 KEY PART NO. NO. DESCRIPTION 1 162157 Control, Throttle 2 17720410 Screw, Hex Head, Thread Cutting 114-20 x 5/8 3 .
TRACTOR -- MODEL NUMBER 917.270732 SEAT ASSEMBLY 17 12 KEY PART NO. NO. 1 127428X 2 140551 3 71110616 4 19131610 5 145006 6 STD541437 7 124181X 6 17000616 9 19131614 10 155925 11 166369 12 121246X DES.
DECALS TRACTOR - - MODEL NUMBER 917.270732 9 13 6 3 4 2 13 10 2O 21 14 8 21 12 KEY PART NO. NO. 1 156368 2 171760 3 171696 4 171697 5 165406 6 133644 9 166887 9 163204 10 166439 12 146046 DESCRIPTION Decal, Oper. Instr. Decal, Replacement Decal, Hood, R.
TRACTOR -- MODEL NUMBER 917.270732 LIFT ASSEMBLY 7 13 5 4 6 2 8 / j • / / 6 5 19 13 32 32 13 19 20 20 15 44.
TRACTOR - - MODEL NUMBER 917.270732 LIFT ASSEMBLY KEY PART NO. NO. DESCRIPTION 1 159460 Washer Asm inner Spdng W/Plunger 2 159471 Shaft Asm. Lift 3 105767X Pin Groove 4 12000002 E Ring #5133-62 5 19211621 Washer 21/32 x 1 x 21 Ga. 6 120183X Beadng Nylong 7 125631X Grip Handle Fluted 8 122365X Sutton Plunger Read 11 139865 Link Asm Lift L.
MOWER DECK TRACTOR -- MODEL NUMBER 917.270732 f 34 "_ 21 16 1 13-- 10_ 9_ 21 22 3 24 25 27 46.
I M/as!t.o1 lt.Pl'i - - IVl!,.JUl" I. I_IUIVIDIPI'I tO I I .'*IUIO j MOWER DECK KEY PART NO. NO. 1 165892 2 STD533107 3 138017 4 165460 5 STD624008 6 130832 8 850857 9 STD551137 10 140296 11 134149 12 129895 13 137645 14 128774 15 110485X 16 140329 18 72140505 19 132827 20 159770 21 STD5414.
TRACTOR -- MODEL NUMBER 917.270732 PEERLESS TRANSAXLE - - MODEL NUMBER 206-545C 157 I I 11 47 13 MODEL and SERIAl NUMBERS HERE 157 48.
TRACTOR -- MODEL NUMBER 917.270732 PEERLESS TRANSAXLE - - MODEL NUMBER 206-545C KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 772147 Transaxle Cover 41A 790079 2 780086A Needle Beadng 5/.
TRACTOR - - MODEL NUMBER 917.270732 BRIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 914 1023 13_ 4o_ 1022 1034 1029 _ 71 1033 VALVE OVERHAUL KIT 1022 51 868_) 307_ REQUIRES SPECIAL TOOLS TO INSTALL.
TRACTOR -- MODEL NUMBER 917.270732 3RIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 754_ 5 127 LMTICARBURETOR PART NUMBER 142 LOCATIONS 276 THiS CARBURETOR SERVICES BOTH CHOKE-A-MATIC AND MANUAL CHOKE SYSTEMS 977 CARBURETOR GA.
TRACTOR - - MODEL NUMBER 917.270732 BRIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 801 797A 524 165 1051 783A 305 1044 _ 75 1051 ,',' J 1036 LABEL-EMISSIONS I 52.
I M/ILi.p I Ul'l - - IVIUUr.i. I_IUIVIDr'I'I _ I I ./..! UI Of. BRIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 _-- NIKKI 130A (_ 1 95A 633A _) 117A i]I 137A 276A 950 121A CARBUR.
BRIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 690156 Cylinder Assembly 2 399265 Bushing/Seal Kit 3 391086 -k Seal-Oil 4 494238 Sump.
TRACTOR -- MODEL NUMBER 917.270732 3RIGGS ENGINE-MODEL NUMBER 311707, TYPE NUMBER 0132-E3 "EY PART KEY PART 10. NO. DESCRIPTION NO. NO. DESCRIPTION ;09 693551 Motor-Starter (For Steel Ring Gear O.
56.
57.
58.
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION SIGHTING _. _CUT GUIDE TH-i_S ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL I Operate your Tractor up and down the face of slopes (not I greater than 15°), never across the face. Make turns gradu- I ally to prevent tipping or loss of control.
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME SM Anytime, day or night (1-800-469-4663) www.
Een belangrijk punt na aankoop van elk apparaat Craftsman 917.270732 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Craftsman 917.270732 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Craftsman 917.270732 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Craftsman 917.270732 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Craftsman 917.270732 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Craftsman 917.270732 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Craftsman 917.270732 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Craftsman 917.270732 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
