Gebruiksaanwijzing /service van het product 917.273322 van de fabrikant Craftsman
Ga naar pagina of 64
Owner's Manual £RAFTZMIIN + 260 HP ELECTRIC START 50" MOWER AUTOMATIC GARDEN TRACTOR Model No. 917.273322 • Safety • Assembly • Operation • Maintenance • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment.
Wal'ranty ............................................... 2 iSafety Rules .................. 2 !Pro_luct Spec f cat ons ...... 5 ;Assembly .............................................. 7 _3pe, ratibn ............................................ 12 Maihtenance Schedule .
• Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. • Turn off blades when not mowing. • Stop engine before removing grass catcher or unclogging chute. • Mow only in daylight or good artificial light.
• Never run a machine inside a closed area. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up.
PRODUCT SPECIFICATIONS GASOLINE CAPACITY AND TYPE: OILTYPE 'API-SF/SG/SH): 3.5 GALLONS UNLEADED REGULAR SAE 10W30 (ABOVE 32°F) SAE 5W-30 (BELOW 32°F) OIL CAPACITY: W/FILTER: 4.5PINTS W/O FILTER: 4.0PINTS SPARK PLUG: CHAMPION GAP: .030") RC12YC GROUND FORWARD: 5.
Steering Wheel Steering Sleeve Steering Sleeve Extension Steering Wheel Insert (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Knob _ Seat (1) Shoulder Bolt 5/16-18 _, Mower (4) Retainer Springs (single loop.
Nose Roller i l)))llllllllll (2) Hex Bolts 3/8-16 x 1 (2) Nylon Locknuts 3/8-16 (2) Washers 17/32 x 7/8 x 16 Ga. Video Cassette Keys (2) Keys Slope Sheet Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes.
BEFORE REMOVING TRACTOR FROM SKID AI-I'ACH STEERING WHEEL • Remove hex bolt, lock washer and large flat washer from steering shaft. • Position front wheels of the tractor so they are pointing straight forward. • Slide the steering sleeve over the steering shaft.
TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) • Press lift lever plunger and raise attachment lift lever to its highest position.
INSTALL MOWER AND DRIVE BELT Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage parking brake. • Cut and remove ties securing anti- sway bar and belts. Swing anti-sway bar to left side of mower deck.
CHECK TIRE PRESSURE The tires on your tractor were overin- flared at the factory for shipping pur- poses. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. f BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL.
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
The cutting height range is approxi- mately 1-1/2" to 4", The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.
TO TRANSPORT When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheel- =ng position. Free wheel control is located at the rear drawbar of tractor. • Raise attachment lift to highest position with attachment lift control.
• Sit on seat in operating position, depress clutch/brake pedal and set parking brake. • Place motioncontrol lever in neutral (N) position. • Move attachment clutchto "DISEN- GAGED" position. • Move throttle controlto fast position • Pull chokecontrol out for a cold enginestart attempt.
NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system. • Move motion control lever to neutral (N) position. Shut- off engine and set parking brake. • Engage transmission by placing freewheel control in driving position (See "TO TRANSPORT" in this section of manual).
PILL ,. DATES R EGU LAR SERVICE /_./_O_sE R VICE DATE S Check Operator Presence and T Interlock Systems V _ I R Check for Loose Fasteners V' i1_, iA Sharpen/Replace Mower Blades V', I 0TC Lu.
TRACTOR Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual).
BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life, • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open.
Air S_i n Plug Oil Fill Cap/ Dipstick CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.
,_CAUTION: Before performing any service or adjustments: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key.
• If adjustment is necessary, make adjustment on one side of mower only. • To raise one side of mower, tighten lift link adjustment nut on that side. • To lower one side of mower, loosen lift link adjustment nut on that side. NOTE: Each full turn of adjustment nut will change mower height about 3/16".
Left Hand Mandrel Cover II Screws Idler Pulleys Primary Idler Arm Spring Electric Clutch Pulley t Left Hand Mandrel Mower Drive Belt Belt Keepers Bolt in '" J Mower _7 / Housing TO REPLACE MOWER BLADE DRIVE BELT Park the tractor on level surface.
Eventually, the internal brake will wear which may cause the mower blades to not engage, or, to not stop as required. Adjustments should be made by your nearest authorized service center/ department. • Make sure attachment clutch and ignition switches are in "OFF" position.
• Retighten belt keeper above transaxle pulley. • Place belt around clutching idlers as shown, making sure to route belt inside of all belt keepers. • Check to be sure belt is positioned correctly and is on proper side of all belt keepers. • Reinstall mower.
TO REMOVE WHEEL FOR REPAIRS FRONT WHEEL • Block up axle securely. • Remove axle cover, retaining ring and washers to allow wheel removal. • Repair tire and reassemble. • Replace washers and snap retaining ring securely in axle groove. • Replace axle cover.
TO REPLACEHEADLIGHTBULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.
TO ADJUST CHOKE CONTROL The choke control has been preset at the factory and adjustment should not be necessary, check adjustment as de- scribed below before loosening cable. If adjustment is necessary, proceed as follows: • With engine not running, move choke control (located on dash panel) to full choke position.
Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.
TROUBLESHOOTING CHART _ROBLEM Will not start Hard to start Engine will not turn over Engine clicks but will not start Loss of power CAUSE • Out of fuel. • Engine not "CHOKED" properly. • Engine flooded. • Bad spark plug, • Dirty air filter.
PROBLEM Loss of power Continued TROUBLESHOOTING CHART CAUSE • Faulty spark plug. • Dirty fuel filter. • Stale or dirty fuel. • Water in fuel. Excessive vibration Engine continues to run when operator leaves seat with attach- ment clutch engaged Poor cut - uneven Mower blades will not rotate Poor grass • Spark plug wire loose.
TROUBLESHOOTINGCHART PROBLEM CAUSE Poor grass discharge (Contn) Headlight(s) not working (if so equipped) Battery willnot :harge Loss of Drive Engine "backfires" when turning engine "OFF" • Worn, bent or loose blade. • Buildup of grass, leaves, and trash under mower.
TRACTOR -- MODEL NUMBER 917.273322 SCHEMATIC FUEL SHUT-OFF SOLENOID HEADLIGHTS PTO SWITCH POSITION CIRCUIT OFF C÷G,B÷H ON C÷F,B+E A*D BELAY IGNITION SWITCH POSITION CIRCUIT "MAKE" OFF M *.
TRACTOR -- MODEL NUMBER 917.273322 ELECTRICAL 22 16' ,i_. /.
TRACTOR -- MODEL NUMBER 917.273322 ELECTRICAL KEY PART NO. NO, DESCRIPTION 1 144927 Batted/ 2 74760412 Bolt Hex Head 1/4-20 x 3/4 8 7603J Tray, Battery 10 145211 Bolt 1/4-20 x 7.
TRACTOR -- MODEL NUMBER 917.273322 CHASSIS AND ENCLOSURES I / 134 21 _141 5_. _140 ' _138 / _47 ! - i k 37 ,. "_, _135 _17 133 31 l " 68/-I / 35f_! -" 1790_ h .. 7_ . 17 I 'K_ 7--_ " - --6 -- _ _130 14_477 1/49 147 / 122 / 150 _, / 122 8 / 68 I "_-30 147 122 / 147 122 28 .
TRACTOR -- MODEL NUMBER 917.273322 CHASSIS AND ENCLOSURES KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 150253 Rail, Frame RH VGT 56 154914 2 140506 Drawbar, Gt 4 73800700 Nut, Lock Hex 7/16 Unc 58 137113 5 163976 Dash 60 17490620 6 157882 Dash Asm.
TRACTOR -- MODEL NUMBER 917.273322 GROUND DRIVE 73 F ;" 77 82 81 83 ,, 72 J 33 9 69 104 108_ ,.'_ _- 107 2 J 48 54 66 15 47 -," ' _115 " 7799 ,: ' ;: " : _116 23 / 67 .
TRACTOR -- MODEL NUMBER 917.273322 GROUND DRIVE KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 2 7070E Key 1/4 x25 71 151179 3 7563R Washer, Thrust, Axle 72 STD541431 5 STD541437 Nut, Crownlock 3/8-16 .
TRACTOR -- MODEL NUMBER 917.273322 STEERING 27 42 19 27 16 30 6 17 _ 14 / L , i, 13" s 13 i // / 8 42.
TRACTOR -- MODEL NUMBER 917.273322 STEERING KEY PART NO. NO. DESCRIPTION 1 159944X428 2 137094 3 6855M 4 161849 5 161848 6 6266H 7 121748X 8 12000029 9 121232X 10 74781044 11 136518 12 7390100O 13 121.
TRACTOR -- MODEL NUMBER 917.273322 ENGINE 22 _' 18 15 17 //_j/ • ÷._ _ 16 39 j_ 47_ 37 / "!_ 39 "_ 45 '_42 43 ' '_ 9 i.
TRACTOR -- MODEL NUMBER 917.273322 ENGINE KEY PART NO. NO. DESCRIPTION 1 ....... Engine {See Breakdown) KohlerCV25S-69526 2 150249 Muffler Side 1-1/8" 5 13200300 Elbow STD 90 Degree 3/8 - 18 NPT .
TRACTOR -- MODEL NUMBER 917.273322 SEAT ASSEMBLY - 1 • i ,i _-_ _ 10 . ,E I _ , . i" 5 !_1_ 15 4 [ ' 18 ,/ ( 17 12 " ,i, 2 _If 20 8-_ 7 'J i ' 22 ,t "; 21 i 3 KEY NO. 1 2 3 4 5 6 7 8 10 12 13 PART NO. DESCRIPTION 140124 Seat 140551 Bracket, Pivot Seat 140675 Strap, Fender 127018X Bolt, Shoulder 5/16-18 x .
DECALS TRACTOR -- MODEL NUMBER 917.273322 18 13 7 6 3 15 13 8 14 12 KEY PART NO. NO. 1 164096 2 164758 3 171702 4 171703 5 140837 6 133644 7 171814 8 164884 9 1632O4 10 156439 11 4900J 12 146790 13 163268 14 160397 KEY PART DESCRIPTION NO.
TRACTOR -- MODEL NUMBER 917.273322 LIST ASSEMBLY 40 43 38 39 42 35 73 34 31 I _ 29 _2 --33 / 2 7 8 1 / i ¸¸' 3 / 12_._ 2s2P 12 _ 24_'_ ,_3 _ 13 ' !!- a ;_ J _ " 12 _ 16 23 ---_ 1.
TRACTOR -- MODEL NUMBER 917.273322 LIST ASSEMBLY KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 29 30 31 32 33 34 35 38 39 40 41 42 43 70 72 NOTE: PART NO. DESCRIPTION 121006X Rod Asm., Lever 159187 Shaft Asm., Lift Vgt 159189 Lever Asm.
TRACTOR - MODEL NUMBER 917.273322 MOWER DECK 48 _49 _ 63 58 103_ / 64 5 '-- 33 114 ! / 34. 105 / 45 48 48 98 / 94 / 2 21 29 22 5O.
TRACTOR - MODEL NUMBER 917.273322 MOWER DECK KEY PART NO. NO. 1 156690 2 STD541431 5 138457 6 STD624008 7 130832 8 850857 9 STD551137 10 140296 11 137380 12 129895 13 137553 14 137152 15 110485X 16 14.
TRACTOR - MODEL NUMBER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L _I08 I2) 52.
TRACTOR -- MODEL NUMB ER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 164591 Assembly, Housing, LH 72 153767 2 164592 Assembly, Housing, RH 73 142904 7 153765 Oil Seal .
TRACTOR -- MODEL NUMBER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L 6 KEY PART NO. NO. 1 144569 2 122716X 3 122745× 4 122715X 5 122700X 6 122699X 8 122767X 12 122717X 13 122748X 14 122749X 15 144571.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CYLINDER HEAD VALVE & BREATHER I 15,_ 3 30 (_ -- 28 I 29 n 1_ 20 L_j_ 19 _ 26 27 _17 , 7-- _js flO 2 CRANKCASE I 21_ 22 20- I C)--19 "-_ , ___ _1,"-" ,3-.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 HEAD/VALVEIBREATHER CRANKCASE KEY PART KEY PART NO. NO. DESCRIPTION NO.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 IGNITION / ELECTRICALJ a_3 0f4 25 __6 24 AIR INTAKE t 11 ! 1(; Is / 13 9 BLOWER HOUSING AND BAFFLES I 8 , / 3 5.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 IGNITIONICHARGING BLOWER HOUSING & BAFFLES KEY PART KEY PART NO. NO. DESCRIPTION NO. NO, DESCRIPTION 1 54-755-15 Kit, grass screen (includes 2-4,and 24 113 18) 2 M-0403025 Screw, hex.
TRACTOR-- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 STARTING SYSTEM I t8--@ , _ 17 1 _11 i_ -13 10--_9 5__4 IL PAN LUBRICATION I EN GIN E CONTROLS J 24 "_®.
TRACTOR - MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 STARTING SYSTEM OIL PAN/LUBRICATION KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 12-098-03 Starter, soleno{d shift 2 M-0839080 Screw, hex. flange M8xl.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CRANKSHAFT J --1 EXHAUST I 1 / 1 7 lo lO 9 lO 15 61.
TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CRANKSHAFT FUEL SYSTEM KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 24-014-72 Crankshaft (Includes 2) 1 24-853-27 2 52-139-09 Plug, cup 2 24-041.15 EXHAUST 3 24-053o27 KEY PART NO, NO.
SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION SIGHTING GUIDE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. 15 ° MAX. t A Operate your Tractor up and down the face of slopes (not I I • ,A greater than 15 ), never across the face.
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800,4-MY-HOME'" (1-800-469-4663) Para pedir servicio de reparacibn a domicilio 1-800-676-5811 In Canada for all y.
Een belangrijk punt na aankoop van elk apparaat Craftsman 917.273322 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Craftsman 917.273322 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Craftsman 917.273322 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Craftsman 917.273322 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Craftsman 917.273322 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Craftsman 917.273322 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Craftsman 917.273322 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Craftsman 917.273322 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
