Gebruiksaanwijzing /service van het product DIN-PWS50 van de fabrikant Crestron
Ga naar pagina of 24
Crestron Green Light™ DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Operations & Installation Guide.
This document was prepared and written by th e Technical Documentation departm ent at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of t heir respective owners.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Contents Crestron Green Light™ DIN Rail 50 Watt Cresnet ® Power Suppl y: DIN-PWS50 1 Introduc tion .........................................................................................
.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Crestron Green Light™ DIN Rail 50 Watt Cresnet ® Power Supply: DIN-PWS50 Introduction The DIN-PWS50 is a 50 Watt Cresnet ® Power Supply module designed to snap onto a standard DIN rail for installation in a wall mount enclosure.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Applications The following diagram shows a DIN-PWS50 in a typical application. DIN-PWS50 in a Typical Application 2 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Specifications Specifications for the DIN-PWS50 are listed in the following table. DIN-PWS50 Specifications SPECIFICATION DETAILS Output Power Per Output Port 50 Watts (2.08 Amps @ 24 Volts DC, Regulated), limited power source Module Total 50 Watts (2.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Physical Description This section provides information on the connections, controls and indicators available on your DIN-PWS50. DIN-PWS50 Physical View 4 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply DIN-PWS50 Overall Dimensions 58 mm (2.29 in) 106 mm (4.18 in) 94.2 mm (3.71 in) 90 mm (3.55 in) 2 3 1 4 Operations & Installation Guide – DOC.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Connectors, Controls & Indicators # CONNECTORS * , CONTROLS & INDICATORS DESCRIPTION 1 100-240V~50/60Hz (2) Sets of (3) captive screw terminals, each set paralleled Line power input, neutral and ground with pass through Maximum wire size: 2.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Industry Compliance This unit has been manufactured to comply with UL’s Standards for Safety in Canada and the United States.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Setup Network Wiring When wiring the Cresnet ® network, consider the following: • Use Crestron Certified Wire. NOTE: Cresnet HP cannot be used. • Use Crestron power supplies for Crestron equipment.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply The DIN-PWS50 is designed for installation on a DIN rail. Refer to the following diagram when installing. Installing the DIN-PWS50 DIN-PWS50 DIN RAIL RELEASE DIN RAIL (NOT SUPP LIED) TOP 1. Place the top of the DIN-PWS50’s rail mount over the top of the DIN rail.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Hardware Hookup Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 8 before attaching the 4-position terminal block connector.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Hardware Connections for the DIN-PWS50 NET: TO CONTROL SYSTEM AND OTHER CRESNE T DEVICES 100-240~50/60H z: FROM AC POWER LINE FUSE IS LO CATED UNDER THIS COV ER POWER TO OTHER DEVICES Operations & Installation Guide – DOC.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Fuse Replacement If the DIN-PWS50 does not power up when it is plugged into an AC outlet, the fuse may need to be repl aced. The fuse holder is located on the front panel, under the cover in the lo wer left corner.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Check Network Wiring Use the Right Wire In order to ensure optimum perform ance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply NOTE: All Crestron certified Cresnet wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pa ir is the Y conductor and the Z conductor.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for credit, exchange or service without prior authorization from CRESTR ON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply Operations & Installation Guide – DOC. 6667A DIN Rail Power Supply: DIN-PWS50 • 17 This page is intention ally left blank.
DIN Rail 50 Watt Cresnet ® Power Supply Crestron DIN-PWS50 This page is intention ally left blank. 18 • DIN Rail Power Supply: DIN-PWS50 Operations & Installation Guide – DOC.
Crestron DIN-PWS50 DIN Rail 50 Watt Cresnet ® Power Supply This page is intention ally left blank. Operations & Installation Guide – DOC. 6667A DIN Rail Power Supply: DIN-PWS50 • 19.
Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6667A 15 Volvo Drive Rockleigh, NJ 07647 (2020749) Tel: 888.CRESTRON 05.08 Fax: 201.
Een belangrijk punt na aankoop van elk apparaat Crestron DIN-PWS50 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Crestron DIN-PWS50 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Crestron DIN-PWS50 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Crestron DIN-PWS50 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Crestron DIN-PWS50 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Crestron DIN-PWS50 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Crestron DIN-PWS50 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Crestron DIN-PWS50 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
