Gebruiksaanwijzing /service van het product Power Supply System van de fabrikant CyberPower Systems
Ga naar pagina of 32
PowerPanel ® Business Edition USER MANUAL Rev. 0.9 2007/10/26 Copyright © 2006-2007 Cyber Power Syst ems, Inc. All rights reserved..
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 1 PowerPanel ® Business Edition USER’S MANUAL PowerPanel ® Business Edition provides power management Services. PowerPanel Business Edition consists of Agent and Slave .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 2 CONTENT MONITOR THE BATTERY BACKUP STATUS AND VIEW THE BATTERY BACKUP INFORMATIO N [A GENT ONLY] ................................................
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 3 Configure Setti ng s o f E vent Ac ti ons for the Selected Event .......................................... 21 Configure Overall Action Settings .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 4 MONITOR THE BATTERY BACKUP STATUS AND VIEW THE BATTERY BACKUP INFORMATION [AGENT ONLY] • Bat.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 5 o * Buck : The present input vo ltage of utility powe r is too high. The Battery Backup will decrease ou tput voltage to normal range. o Overload : The present load exceeds th e maximum loa d the Battery Backup can support.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 6 • Status : Displays the present operating status of the Battery B ackup. o Normal : The system status is normal. o * Fault : The s ystem is in fa ult state due to an internal malfunction.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 7 VIEW THE POWER SYSTEM INFORMATION AND CONFIGURE POWER SYSTEM LOCATION [SLAVE O NLY] • Introd.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 8 The Power System Location page lets you configure the power system address and view the connection state of Power System.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 9 CONFIGURE THE BATTERY BACKUP SETTINGS AND PERFORM DIAGNOSTICS [AGENT ONLY] • Configure the B.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 10 o Turn off when utility power fails for minutes : Sets how long the utility pow er is off before tur ning off this outlet. The valid value is 0- 120.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 11 • * Restore power when the batteri es have been charged to a percentage of battery capa city : Sets how much battery capacity must be present for the B attery Backup to restore power.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 12 • The Battery Backup alarm is : If you enable this optio n, the Battery Backup alarm will so und when it switches to battery mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 13 The runtime calibration synchronizes th e runtime estimate with the current load and battery capacity. When a runtime calibration initiates, Calibration is initiated event occurs.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 14 CONFIGURE PROTECTED SYSTEM AND VIEW THE SUMMARY • Configure pro tecte d system identificati.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 15 SNMP-TRAP comm unity key : Find thi s setting on Networ k- >Trap Notification page. Ad d a TrapReceiver and ty pe Slave IP and community key to fill the fields.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 16 2. The details of the equipment will be shown in the tex t field of name , location, contact, a nd powered by which outlet. 3. Modif y th e detail s of the equipm ent in tho s e t ext fields .
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 17 CONFIGURE ACTION SETTINGS FOR DIFFERENT EVENTS • Configure Settings of Event Ac tions for Se lected Events from the Event List. • Configure Settings of Even t Actions in the Event List in Quick Setting Mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 18 overloaded Battery-test failure The battery-test failed to pr ovide battery power normally. Batteries are not present Batteries are not present; the Battery Backup cannot provide b attery power in this cond ition.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 19 Leaves bypass mode Leaves bypass mode and switch to line mode or ba ttery mode, battery p ower will be used. Battery-test is successful The Battery test was successfu l, battery powe r is normal.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 20 Output is no longer overloaded Output is normal a nd no longer overloaded. Bypass is no longer overloaded Output is no longer overloa ded in bypass mode.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 21 You can configure the actions enabled or disabled in event list. There is only one step to do. Click the top-right Qu ick Setting Mode icon. Then you can enable or disable each setting of even t actions by checking or unchecking the check box.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 22 receivers which are not belong to local users, those notification receivers will not receive the notifica tion.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 23 • Shutdown Sequence : o Initiate a shutdow n sequence for this event : If you enable th is option, the Battery Backup will initia te a shutdown sequence when the event occurs.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 24 o SMTP server requires validati on : If you enable this option, the e- mail will be sen t using the cre denti als you supply. If you enable this option, complete the account and password field.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 25 4. Click the Cancel b utton to cancel ad ding an e-mail receiver. o Remove an e- mail receiver 1. Select the e-mail receiver from the e-mail receivers list a nd click it.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 26 Note: Google®, Google® Talk, and Gmail™ are either registered trademarks or t rademarks of Google® Corporation in the U nited States and/or other cou ntries.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 27 • Runtime : The rema ining runtime of the Battery Backup (minutes). DISPLAY OPTION The display option let you to decide the status records you want to view.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 28 MANAGE SCHEDULED SHUTDOWN AND RESTART SETTINGS [AGENT ONLY] The Schedule page lets you manage your shutdown schedules.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 29 SHUTDOWN SCHEDULE MESSAGES Messages Description The maximum dura tion is 30 days. Modify the Shutdown Time and Reboot Time . A sched ule with duratio n over 30 days is not allowed.
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 30 CHANGE THE AUTHENTICA TION USERNAME AND PASSWORD The Authentication page allows you to change the username or the password. The default username and password are "admin".
PowerPan el ® Business Edition Copyright © 2006-2007 Cyber Power Syst ems, Inc. Al l rights reserved. 31 CONNECT TO THE SYSTEM FROM REMOTE COMPUTER You can connect to the administrator system from remote computer as following steps. • You need to know the admi nistrator system host IP.
Een belangrijk punt na aankoop van elk apparaat CyberPower Systems Power Supply System (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen CyberPower Systems Power Supply System heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens CyberPower Systems Power Supply System vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding CyberPower Systems Power Supply System leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over CyberPower Systems Power Supply System krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van CyberPower Systems Power Supply System bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de CyberPower Systems Power Supply System kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met CyberPower Systems Power Supply System . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
