Gebruiksaanwijzing /service van het product DCS-3710 van de fabrikant D-Link
Ga naar pagina of 52
.
2 D-Link DCS-3710 User Manual Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 Hardware Overview ......................................
3 D-Link DCS-3710 User Manual D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes.
4 D-Link DCS-3710 User Manual Product Overview Product Overview If any of the above items are missing, please contact your reseller. CAT5 Ethernet Cable DCS-3710 Network Camera Camera Stand Power Adap.
5 D-Link DCS-3710 User Manual Hardware Overview Hardware Overview Hardware Overview Rear LED Power and network indicator I/O Connector I/O connectors for external devices BNC Video analog output Reset.
6 D-Link DCS-3710 User Manual Hardware Overview Lens Connector Connect to a CS mount ICR Sensor The IR-Cut Removable sensor judges lighting conditions and switches from color to infrared accordingly F.
7 D-Link DCS-3710 User Manual Hardware Overview DC-Iris Connector Connector for DC auto iris lens DIP Switch Toggles several different camera options Iris Level Can be used to adjust the auto iris 1. AES: Auto Electric Shutter 2. DC IRIS: Use an auto iris (DC drive) 3.
8 D-Link DCS-3710 User Manual Hardware Overview SD Card Slot Local SD card for storing recorded images and video.
9 D-Link DCS-3710 User Manual Hardware Overview Conguration with Wizard Insert the DCS-3710 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run .
10 D-Link DCS-3710 User Manual Hardware Overview Click Yes to accept the License Agreement. To start the installation process, click Next . Note: The installation may take several minutes to nish.
11 D-Link DCS-3710 User Manual Hardware Overview Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
12 D-Link DCS-3710 User Manual Hardware Overview Enter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank. Click Next , to proceed to the next page. The Setup Wizard will appear and display the MAC address and IP address of your camera(s).
13 D-Link DCS-3710 User Manual Hardware Overview Take a moment to conrm your settings and click Restart . Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started.
14 D-Link DCS-3710 User Manual Conguration Web-based Conguration Utility Conguration This section explains how to congure your new D-Link Network Camera using the Web-based Conguration Utility. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.
15 D-Link DCS-3710 User Manual Conguration This section shows your camera’s live video. You can select your video prole and view or operate the camera. For additional information about web conguration, please refer to the user manual included on the CD-ROM or the D-Link website.
16 D-Link DCS-3710 User Manual Conguration Live Video This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen.
17 D-Link DCS-3710 User Manual Conguration Setup Wizard To congure your Network Camera, click Internet Connection Setup Wizard . Alternatively, you may click Manual Internet Connection Setup to manually congure your Network Camera and skip to page 22.
18 D-Link DCS-3710 User Manual Conguration Select Static IP if your Internet Service Provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct conguration information and click Next to continue.
19 D-Link DCS-3710 User Manual Conguration Congure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP address.
20 D-Link DCS-3710 User Manual Conguration This wizard will guide you through a step-by-step process to congure your camera's motion detection functions. Click Next to continue. Step 1 This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement.
21 D-Link DCS-3710 User Manual Conguration Step 3 This step allows you to specify how you will receive event notications from your camera. You may choose not to receive notications, or to receive notications via e-mail or FTP. Please enter the relevant information for your e-mail or FTP account.
22 D-Link DCS-3710 User Manual Conguration Network Setup LAN Settings: DHCP: Static IP Address: IP Address: Subnet Mask: Default Gateway: Primary DNS: Secondary DNS: Enable UPnP: Enable UPnP Port Forwarding: Settings for your local area network.
23 D-Link DCS-3710 User Manual Conguration Enable PPPoE: User Name: Password: HTTP Port: Access Name for Stream 1~3: HTTPS Port: RTSP Port: Maximum Upload/Download Bandwidth: Enable this setting if your network uses PPPoE. The unique name of your account.
24 D-Link DCS-3710 User Manual Conguration Dynamic DNS DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modied. A user name and password are required when using the DDNS service.
25 D-Link DCS-3710 User Manual Conguration Image Setup In this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.
26 D-Link DCS-3710 User Manual Conguration Brightness: Contrast: Saturation: Sharpness: WDR Level: Reset Default: Adjust this setting to compensate for backlit subjects. Adjust this setting to alter the color intensity/strength. This setting controls the amount of coloration, from grayscale to fully saturated.
27 D-Link DCS-3710 User Manual Conguration Audio and Video You may congure 3 video proles with different settings for your camera. Hence, you may set up different proles for your computer and mobile display. In addition, you may also congure the two-way audio settings for your camera.
28 D-Link DCS-3710 User Manual Conguration Motion Detection Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used for monitoring.
29 D-Link DCS-3710 User Manual Conguration Time and Date This section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera.
30 D-Link DCS-3710 User Manual Conguration Event Setup The Event Setup page includes 4 different sections. • Event • Server • Media • Recording 1. To add a new item - "event, server or media," click Add . A screen will appear and allow you to update the elds accordingly.
31 D-Link DCS-3710 User Manual Conguration Application In a typical application, when motion is detected, the DCS-3710 Network Camera sends images to a FTP server or via e-mail as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices.
32 D-Link DCS-3710 User Manual Conguration Server Name: E-mail: FTP: Network Storage: SD Card: Enter the unique name of your server. Enter the conguration for the target e-mail server account. Enter the conguration for the target FTP server account.
33 D-Link DCS-3710 User Manual Conguration Media Name: Snapshot: Source: Send pre-event image(s) [0~4]: Send post-event image(s) [0~7]: File name prex: Add date and time sufx to le name: Video clip: Source: Pre-event recording: Maximum duration: Maximum le size: File name prex: System log: Enter an unique name for media.
34 D-Link DCS-3710 User Manual Conguration Send post-event image (s) [0~7) Specify to capture the number of images after a trigger is activated. A maximum of seven images can be generated. For example: If both the Send pre-event images and Send post-event images are set to four, a total of 9 images are generated after a trigger is activated.
35 D-Link DCS-3710 User Manual Conguration If the Pre-event recording is set to ve seconds and the Maximum duration is set to ten seconds, the Network Camera continues to record for another four seconds after a trigger is activated. File name prex Enter the text that will be added at the beginning of the le name.
36 D-Link DCS-3710 User Manual Conguration Event name: Enable this event: Priority: Delay: Trigger: Video Motion Detection: Periodic: Digital input: System Boot: Time: Trigger D/O: Server: Enter a name for the event. Select this box to activate this event.
37 D-Link DCS-3710 User Manual Conguration Recording entry name: Enable this recording: Priority: Source: Recording schedule: Recording settings: Destination: Total cycling recording size: Size of each le for recording: File Name Prex: The unique name of the entry.
38 D-Link DCS-3710 User Manual Conguration Format SD Card: View Recorded Picture: Playback Recorded Video: Refresh: Click this icon to automatically format the SD card and create "picture" & "video" folders.
39 D-Link DCS-3710 User Manual Conguration Advanced This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors and alarm relays.
40 D-Link DCS-3710 User Manual Conguration RS-485 You may congure the RS-485 settings or communication specications (baud rate, data bit, stop bit, and parity bit) for your camera. RS-485 is a serial communication method for computers and devices.
41 D-Link DCS-3710 User Manual Conguration ICR You may congure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity in low light environments. Automatic: Day Mode: Night Mode: Schedule Mode: DC Power Output: The Day/Night mode is set automatically.
42 D-Link DCS-3710 User Manual Conguration HTTPS This page allows you to install and activate an HTTPS certicate for secure access to your camera. Enable HTTPS Secure Connection: Create Certicate Method: Status: Note: Enable the HTTPS service.
43 D-Link DCS-3710 User Manual Conguration Access List Here you can set access permissions for users to view your DCS-3710. Allow list: Start IP address: End IP address: Delete allow list: Deny list: Delete deny list: The list of IP addresses that have the access right to the camera.
44 D-Link DCS-3710 User Manual Conguration Maintenance You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create the unique name and congure the OSD setting for your camera.
45 D-Link DCS-3710 User Manual Conguration Backup and Restore In this section, you may backup, restore and reset the camera conguration, or reboot the camera. Save To Local Hard Drive: Local From Local Hard Drive: Restore to Factory Default: Reboot Device: You may save and document your current settings into your computer.
46 D-Link DCS-3710 User Manual Conguration Firmware Upgrade The camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available rmware version.
47 D-Link DCS-3710 User Manual Conguration Status This page displays detailed information about your device and network connection. Device Info.
48 D-Link DCS-3710 User Manual Conguration This page displays the log information of your camera. You may download the information by clicking Download .
49 D-Link DCS-3710 User Manual Conguration This page provides helpful information regarding camera operation. Help.
50 D-Link DCS-3710 User Manual Appendix DI/DO Schematics Appendix.
51 D-Link DCS-3710 User Manual Appendix Technical Specications General Specication 1/3” Megapixel WDR Progressive Scan CMOS Removable IR-cut Filter: Auto/Schedule/Manual 3A Control: AGC, AWB, AES DC Iris vari-focal Lens: 2.8~12mm, F1.
52 D-Link DCS-3710 User Manual Appendix Power Input 100-240VAC, 50/60Hz, 12V DC 1.25A Dimensions (W x D x H) 80mm x 140mm x 53mm Operating Temperature 0˚~40˚C (32˚-104˚F) Storage Tempe.
Een belangrijk punt na aankoop van elk apparaat D-Link DCS-3710 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen D-Link DCS-3710 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens D-Link DCS-3710 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding D-Link DCS-3710 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over D-Link DCS-3710 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van D-Link DCS-3710 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de D-Link DCS-3710 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met D-Link DCS-3710 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
