Gebruiksaanwijzing /service van het product 702 van de fabrikant 3M
Ga naar pagina of 23
Handheld RFID Reader Model 702 and Model 802 Owners Manual 3M Security Sy stems Division 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 Copyright © 2003-2004 3M IPC.
.
Copyright 2003-2004, 3M IPC. All rights reserved. Table of Contents Safety Info rmation .......................................................................... 1 Intended Use .....................................................................
.
1 Safety Information Read, understand, and follow all safety information contained in these instructions prior to installation of the 3M™ Handheld RFID Reader Model 702 and Model 802.
2 Safety messages WARNING To reduce the risk associated w ith fire and explosion: Do not attempt to use a damaged battery pack, charger, or power supply; Do not allow battery pack to come in c.
3 Important Notes Important notes summarize best practi ces that can help you avoid damaging the 3M™ Handheld RFID Reader Model 702 and Model 802 (Handheld) and/or corrupting data. IMPORTANT NOTES! Be careful not to damage the handheld. DO NOT drop the Handheld.
4 Safety label locations 702_001 N1 108 Model 702 12 VDC PWR COM/ST A TUS FCC ID: DGF-LSD702 CANADA: ______ S/N: 702XXXX N1 108 Model 802 12 VDC PWR COM/ST A TUS FCC ID: DGF-LSD702 CANADA: ______ S/N:.
5 EMC, USA, and Canada Compliance FCC Radio Frequency Rules and Regulations This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
6 Getting Started The 3M™ Handheld RFID Reader Model 702 and Model 802 (Handheld) are used to read 3M™ RFID Tags placed in items such as books, videocassettes, files, etc. The main difference between the Model 702 and Model 802 hardware is the type of RFID tag that they can read.
7 Handheld components IMPORTANT NOTE! Be careful not to damage the handheld. DO NOT drop the Handheld. DO NOT leave the Handheld in locations where it might fall. DO NOT leave the Handheld in direct sunlight. DO NOT expose the Handheld to heat.
8 Controls and indicators The handheld display includes menu selections and setup screens with various checkboxes. Most tasks are selected using t he menu buttons . You can also use the stylus to select various handheld functions. Use the sty lus to check and uncheck the various checkboxes that appear in the setup screens.
9 Using the Handheld Device for the first time Step 1 – Use your system software to export your data and 3M Handheld software onto a memory card. (See your Software User Manual.) 1 Install the Handheld softw are (located on the CD- ROM delivered with the handheld) on the same computer where you install ed your system software.
10 Inserting the memory card The memory card contains the data and Handheld software required for operation. 1 - Install a pull tab on the memory card The handheld includes a number of pull tabs that you can attach to various memory cards. These pull tabs can make removing memory cards easier.
11 Removing the memory card IMPORTANT NOTE! Alw ays return to the Home screen before remov ing the memory card. This helps avoid corrupting data that y ou collected with the handheld and saved to the memory card. Procedure 1 Press Home to return to the Home screen.
12 Resetting the handheld If the handheld display locks up or stops working, perform the reset procedure described below. Symptoms may include: The power will not come on (screen remains blank). Lines appear on the display or the display is distorted.
13 Formatting a memory card If the Handheld displays database error messages when you insert the memory card, try reformatting the memory card. If this procedure does not work, call 3M Service. (See Requesting service on page 18.) Using Windows to format the memory card 1 Double-click the My Computer icon on your computer’s desktop.
14 Adjusting the antenna If necessary, use the antenna adjustment tool (shipped with the Handheld) to carefully adjust the swivel tightness of the handheld antenna. If the antenna is too loose Use the antenna adjustment tool to tighten (turn clockwise) the antenna adjustm ent screw slightly until the antenna swivels properly.
15 Battery Management The handheld is powered by a rechargeable lithium-ion battery that must be periodically charged. Battery charging guidelines Batteries may be charged overnight or for extended periods. Batteries do not have to be discharged before recharging them.
16 Charging the battery Always keep one of the two batteries fully charged in the battery charger. The typical charge time is four hours. To charge a battery 1 Connect the battery charger. a Connect the pow er supply output to the charger stand. b Plug one end of the pow er cord into the power supply.
17 Replacing the battery Battery replacement Most software options are protected if all power is lost. If a battery is remov ed and replaced in approximately one minute, the handheld will continue to function without interruption.
18 Requesting service Before you call Before you call 3M Service, have t he following information available: Have the Handheld near the phone. Write down the Handheld’s serial number (located on the bottom of the Handheld). Be ready to describe the problem and any error messages in detail.
19 Ordering replacement parts The following consumable parts may be ordered separately: Stock Number Description 78-8123-7939-0 Battery 78-8123-7940-8 Battery charger assembly 26-1014-9577-3 Antenna-a.
Een belangrijk punt na aankoop van elk apparaat 3M 702 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen 3M 702 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens 3M 702 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding 3M 702 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over 3M 702 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van 3M 702 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de 3M 702 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met 3M 702 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
