Gebruiksaanwijzing /service van het product 13-7350 van de fabrikant Dell
Ga naar pagina of 48
Latitude 13-7350 Series User’s Guide Regulatory Model: P58G Regulatory Type: P58G001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents 1 Contacting Dell...................................................................................................... 5 2 System Overview...................................................................................................6 3 Undocking/Docking your Tablet .
Turning On/Off mobile broadbandConnecting to a mobile broadband networkDisconnecting from mobile broadband networkMobile broadband optionsService Provider hardware informationEnabling PIN lock .............................................. 24 Refreshing / Recovering / Re-setting your tablet .
1 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options.
2 System Overview Figure 1. Overview Figure 2. Top view 1. USB 3.0 connector 2. Mini-DisplayPort connector 3. Noble security-cable slot 4. Microphones 5. Ambient-light sensor 6. Camera-status light 7. Camera 8. USB 3.0 connector with PowerShare 9. Power connector 10.
Figure 3. Side view 7.
3 Undocking/Docking your Tablet 1. Slide the button to the left to undock the tablet from the base. 2. Lift upwards and separate the tablet from the base to complete the undock process. 3. To dock the tablet to the base, Slide the button to the left to ensure that the hook is inside of the docked pin.
9.
4 Inserting an SD card 1. Insert the SD card into the SD card slot on the keyboard base. NOTE: The plastic filler piece needs to be removed first before inserting an SD card.
5 Installing the micro-SIM Card CAUTION: Removing the Micro-SIM card when the tablet is on may cause data loss or damage the card. Make sure your tablet is turned off or the network connections are disabled. 1. Insert a paperclip or a SIM removal tool to remove the SIM card tray from the tablet.
6 Setting Up Your Tablet Charging the Tablet CAUTION: Charge the battery in an ambient temperature of 0 °C to 40 °C. CAUTION: Use only the power adapter and power cable that came with your tablet. Using unauthorized power adapters or power cables may cause severe damage to your tablet.
Battery icon Description Battery is fully charged and AC adapter is connected. Battery is charging with AC adapter. Your tablet is running on battery power and the battery is discharging. Your tablet is plugged in, and either no battery is detected or the battery is not working correctly.
Turning off the Screen Using power button Press the Power button to turn off the screen. Using Charms 1. Swipe from the right edge of the display to access the Charms bar. 2. Touch Settings → Power → Sleep to turn off the screen. NOTE: If your tablet is in a sleep state, press the Power button or Windows button once to turn on the screen.
Using charms 1. Swipe from the right edge of the display to access the Charms menu. 2. Touch Settings —> Power —> Shut down to turn off the tablet.
7 Using Your Tablet Screen Orientation For optimal viewing experience, the screen orientation changes automatically to portrait or landscape format depending on how you hold the tablet. NOTE: Some applications may not support automatic screen rotation to portrait or landscape format.
You can also adjust your screen automatically. To adjust the screen brightness automatically: 1. Swipe from the right edge of the display to access the Charms bar. 2. Touch Settings → Change PC settings → PC and devices → Power and sleep . 3. Under Brightness, slide left or right to turn on / turn off the automatic brightness option.
Gesture Actions Functions Swipe or Slide Move your finger in a vertical or horizontal direction on the display • Scroll through the Start screen, web pages, lists, entries, photos, contacts, and so on • Close an application.
Right-Click To perform a right-click on your tablet, Touch and Hold your finger for 2 seconds on any section of the screen or an icon and then release your finger.
Get to know Windows 8.1 You can touch the Help+Tips tile on the Start screen to get help and tips on using Windows 8.1. Swipe Right Swiping-in from the right edge of the display reveals the Charms bar. Charms provide access to the system commands, such as Start, Search, Share, Devices, and Settings options.
You can also enable the camera (front), when the screen is in lock mode. To enable the camera when the screen is in lock mode: 1. Swipe from the right edge of the display to access the Charms bar. 2. Click Settings → Change PC Settings → PC and Devices 3.
NOTE: It is recommended that you turn down the volume level before plugging the headset, and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.
8 Managing your tablet settings Wi-Fi setting Turning On/Off Wi-Fi 1. Swipe from the right edge of the display to access the Charms bar. 2. Touch Settings → Change PC settings → Networks → Airplane mode . 3. Swipe Wi-Fi icon right or left to turn Wi-Fi on or off.
NOTE: Hidden SSIDs and other advanced configurations may require going to the network and sharing center and selecting the option to manually configure the connection. Mobile broadband setting Turning On/Off mobile broadband 1. Swipe from the right edge of the display to access the Charms bar.
Connecting to a mobile broadband network 1. Ensure an active SIM card is inserted into the tablet. 2. Swipe from the right edge of the display to access the Charms bar. 3. Touch Setting → Network → Connections → Your Service Provider → Connect .
• Touch View connection properties to view your connected mobile broadband properties. NOTE: If the option Set as metered connection is enabled, Windows Update will not download updates automatically unless it is a high priority, critical security update.
1. Swipe from the right edge of the display to access the Charms bar. 2. Touch Settings → Change PC Settings → Update and recovery → Recovery . • Refresh your PC without affecting your files • Remove everything and reinstall Windows • Advanced startup 3.
9 Synchronizing your tablet Using Microsoft account If your computer has Microsoft Windows 8.1 installed, you can synchronize user settings of your tablet with your computer using a Microsoft account.
10 Cleaning Your Tablet CAUTION: Before you clean your tablet, disconnect all cables. Clean your tablet with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances. 1. Turn off your tablet. For more information on turning off your tablet, see Turning Off Your Tablet.
11 Troubleshooting Battery problem Problems Possible causes Possible solutions Battery does not charge • Unplug the Dell AC power adapter from the wall and verify that the outlet is functioning. • Check all cable connections and plug back into the wall, then back into the tablet.
connect to, or temporarily turn off the wireless connection on your tablet. • Use your tablet in airplane mode. System problem Problems Possible causes Possible solutions Tablet does not turn on The battery is completely discharged. 1. Charge the tablet for at least 4 hours.
Touchscreen problem Problems Possible causes Possible solutions Touchscreen responds slowly or improperly Protective cover prevents the tablet from recognizing your inputs. • Shutdown and restart your tablet. • Gently wipe the display with a clean dry cloth.
Setting Up a WLAN using a Wireless Router and a Broadband Modem 1. Contact your Internet service provider (ISP) to obtain specific information about the connection requirements for your broadband modem. 2. Ensure that you have wired Internet access through your broadband modem before you attempt to set up a wireless Internet connection.
3. Reset the wireless router if using a private network; open the browser to view the landing page if using a public network. 4. Contact your internet service provider for assistance. No mobile broadband connection • The mobile broadband has been capped.
12 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hard.
NOTE: If you cannot find your Service Tag, click Detect My Product . Proceed with the instructions on screen. 4. If you are unable to locate or find the Service Tag, you can select your product from the products list under the General Support . 5. Choose the Product Type from the list.
Option Function interacting with flash memory. Processor Type Displays the processor type available on the tablet. Core Count Displays the core count of the tablet. Processor ID Displays the processor ID of the tablet. Current Clock Speed Displays the current clock speed of the tablet.
Option Function Native Resolution Displays the resolution of the tablet. Audio Controller Displays the audio controller used in the tablet. WiGig Device Displays the WiGig device in the tablet. Wi-Fi Device Displays the Wi-Fi device in the tablet. Cellular Device Displays the cellular device in the tablet.
Table 4. Advanced Boot Options Option Function Enable Legacy Option ROMs During the UEFI boot mode, the Enable Legacy Option ROMs option will allow legacy option ROMs to load. This option is not allowed if Secure Boot is enabled. Enable UEFI Network Stack Enable UEFI Network Stack function with IPV4/ IPV6 PXE protocol support.
Option Function Keyboard Illumination Allows you to choose the keyboard illumination features. Keyboard Backlight with AC Allows user to use keyboard illumination features with the AC power connected. Miscellaneous Devices Allows you to enable or disable various on-board devices.
Option Description Click OK after entering the password details. Strong Password Enable strong password - This option is disabled by default. Password Configuration This field controls the minimum and maximum number of characters allowed for the admin and system passwords.
Option Description CPU XD Support This option enables or disables the Execute Disable mode of the Processor. • Enable CPU XD Support (Default Enable) Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is set.
Option Description • 2 Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of the processor. • Enable Intel(R) SpeedStep (Default) C States Control Allows you to enable or disable the additional processor sleep states.
Option Description • Primary AC Use • Custom NOTE: Some of the battery settings may not be available for all battery types. To enable this option, you should disable the Advanced Battery Charge Configuration Mode.
Option Description • GPS • Bluetooth Wireless Switch Determines if wireless devices can be controlled by the wireless switch. Table 15. Maintenance Option Description Service Tag Displays the service tag of your tablet. Asset Tag Allows you to create a system asset tag if an asset tag is not already set.
Video Video controller Integrated Graphics (iGPU GT2) Resolution 1920 x 1080 pixels Communications Network adapter LTE, HSPA+ Wireless WLAN, BT Ports and Connectors Audio one global 3.5 mm jack Video one Mini DisplayPort on tablet base USB 3.0 two USB 3.
Camera (Front) Type OV 2724 (2 MP) Resolution 1080p supported Camera (Back) Type IMX 134 (8 MP) Resolution 1080p supported Storage Storage 128 GB / 256 GB / 512 GB Solid state drive Battery Type • Tablet – 30.
AC Adapter Type Input voltage 100 VAC to 240 VAC Input current (maximum) 1.3 A Input frequency 50 Hz to 60 Hz Output power 23.4 W / 30 W Output current (30 W) 2.31 A Rated output voltage 19.5 Vdc Temperature range: Operating 0 °C to 40 °C (32 °F to 104 °F) Non-operating –40 °C to 70 °C (–40 °F to 158 °F) Physical (Notebook) Height 320.
Een belangrijk punt na aankoop van elk apparaat Dell 13-7350 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dell 13-7350 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dell 13-7350 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dell 13-7350 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dell 13-7350 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dell 13-7350 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dell 13-7350 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dell 13-7350 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
