Gebruiksaanwijzing /service van het product IN2010N van de fabrikant Dell
Ga naar pagina of 28
Dell™IN2010NFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page AboutYourMonitor Dell™IN2010NFlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts and .
The IN2010N flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 20 - inch (508 mm) viewable area display. ■ 1600 x 900 resolution, plus full - screen support for lower resolutions.
.
Bottom view Monitor Specifications Power Management Modes IfyouhaveVESA'sDPMS™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use.
Flat Panel Specifications * IN2010N Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%). Resolution Preset Display Modes 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self - test 6 GND -R 7 GND -G 8 GND -B 9 Computer 5V/3.
Electrical Physical Characteristics VGA, 720 x 400 31. 469 70.0 87 28.3 - /+ VGA, 640 x 480 31. 469 59.940 25.2 -/ - VGA , 640 x 480 37.5 00 75.0 00 31.5 -/ - VESA, 800 x 600 37. 879 60.3 17 40.0 +/+ VESA, 800 x 600 46. 875 75.0 00 49.5 +/+ VESA, 1024 x 768 48.
Environmental Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™IN2010NFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Safety Information that ships with your monitor.
Back to Contents Page Setting Up Your Monitor Dell™IN2010NFlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™IN2010NFlatPanelMonitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™IN2010NFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table fora complete list of all the options available for the monitor. 3. Press the buttononcetoactivatethehighlightedoption.
NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration. Color Settings Input Color Format Mode Selection Pr.
Sports Nature Hue Saturation Demo Mode Reset Color Settings Back Mode suitable for sports scenes. Mode suitable for nature scenes. This feature can make the video image color shift from green to purple. Use this feature to adjust the skin tone. Use or button to adjust the hue from '0' to '100'.
Horizontal Position Vertical Position Sharpness Pixel Clock Phase Reset Display Setting Back Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). Use the and buttons to adjust image up and down.
Language Menu Transparency Menu Timer Menu Lock DDC/CI LCD Conditioning Factory Reset Back Language option to set the OSD display to one of 6 languages (English, Espanol, Francais, Deutsch, Japanese, Simplified Chinese). Allows you to adjust the OSD background from opaque to transparent.
OSD Warning Messages When the monitor does not support a particular resolution mode you will see the following message : This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problems for more information. Setting the Maximum Resolution To set the maximum resolution for the monitor. 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1600x900.
Using the Tilt Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Back to Contents Page NOTE: The stand is attached when the monitor is shipped from the factory.
Back to Contents Page Setting Up Your Monitor Dell™IN2010NFlatPanelMonitor Important instructions to set the display resolution to 1600x900 (Maximum) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1600 x 900 pixels by performing the following steps: 1.
Dell™IN2010NFlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™IN2010NFlatPanelMonitor User's Guide Attaching the Base Connecting the Monitor Attaching the Soundbar (.
2. Turn on the monitor and the computer. If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems . Attaching the Soundbar (Optional) Removing the Base After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base.
Back to Contents Page Solving Problems Dell™IN2010NFlatPanelMonitorUser'sGuide Self - Test Built - in Diagnostics Common Problems Product - .
4. Carefully inspect the screen for abnormalities. 5. Press the shortcut button 4 key on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.
Product - Specific Problems TroubleshootingtheDell™Soundbar(Optional) l Reset the monitor to Factory Settings. l Perform monitor self - test feature check to determine if the intermittent problem occurs in self mode. Missing Color Picture lacks color l Perform monitor self - test feature check.
Back to Contents Page l Set all Windows volume controls to their maximum. l Increase the volume of the audio application. l Test the Soundbar using another audio source (i.
Een belangrijk punt na aankoop van elk apparaat Dell IN2010N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dell IN2010N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dell IN2010N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dell IN2010N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dell IN2010N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dell IN2010N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dell IN2010N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dell IN2010N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
