Gebruiksaanwijzing /service van het product MD1400 van de fabrikant Dell
Ga naar pagina of 37
Dell Storage MD1400 Enclosures Hardware Owner's Manual.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents 1 About your enclosure........................................................................................... 5 Front-panel features and indicators ..........................................................................................
Installing the control panel ........................................................................................................... 29 Backplane .....................................................................................................
1 About your enclosure Front-panel features and indicators Figure 1. Front-panel features and indicators Item Indicator, Button, or Connector Icon Description 1 System identification button The system identification button on the front control panel can be used to locate a particular enclosure within a rack.
Front-bezel features and indicators Figure 2. Front-bezel features and indicators Item Indicator, Button, or Connector Icon Description 1 Enclosure status LED The enclosure status LED lights when the enclosure power is on. Lights solid blue during normal operation.
Hard disk drive indicator patterns Figure 3. Hard disk drive indicators 1. hard disk drive activity indicator (green) 2. hard disk drive status indicator (green and amber) 3.
Hard disk drive- status indicator pattern (RAID Only) Condition Blinks green for three seconds, amber for three seconds, and turns off in six seconds. Rebuild aborted Back-panel features and indicators Figure 4.
NOTE: At least one EMM must be installed in the enclosure. If only one EMM is installed in the enclosure, it must be installed in the primary EMM bay and a blank must be installed in the secondary EMM bay.
Power indicator codes Figure 6. Power indicator codes Item LED Icon Color State 1 DC power Green • ON — Normal operation. Power supply is connected to DC power and the power switch is on. The power supply module is supplying DC power to the array.
• The OpenManage Server Administrator documentation provides information about managing your storage solution using the storage management service within the server administrator. • The Dell PowerEdge RAID Controller (PERC) H830 and Dell 12Gb SAS HBA User’s Guide provides information about configuring RAID.
2 Installing enclosure components Recommended tools You may need the following items to perform the procedures in this section: • Key to the system keylock • #2 Phillips screwdriver • Wrist grounding strap Front bezel (optional) Removing the front bezel 1.
Installing the front bezel 1. Hook the right end of the bezel onto the chassis. 2. Fit the free end of the bezel onto the system. 3. Secure the bezel with the keylock. Hard disk drives Safety: Models AMT, E03J, and E04J Models AMT, E03J, and E04J are intended for installation only in restricted access locations as defined in cl 1.
Figure 8. Removing and installing a 3.5-inch hard disk drive blank 1. hard disk drive blank 2. release tab Installing a hard disk drive blank 1. If installed, remove the front bezel. See Removing the front bezel . 2. Insert the hard disk drive blank into the hard disk drive bay until the blank is fully seated.
Figure 9. Removing and installing a hard disk drive 1. release button 2. hard disk drive 3. hard disk drive carrier handle Installing a hard disk drive CAUTION: Many repairs may only be done by a certified service technician.
Figure 10. Removing and installing a hard drive into a 3.5-inch hard disk drive carrier 1. screws (4) 2. hard disk drive 3. hard disk drive carrier Installing a hard disk drive into a hard disk drive carrier 1. Insert the hard disk drive into the hard disk drive carrier with the connector end of the hard disk drive at the back.
Removing an EMM blank CAUTION: To maintain proper system cooling, make sure you install an EMM blank in the empty slot. 1. Remove EMM 0. See Removing an EMM blank . 2. To remove the EMM blank, press down on the release latch and pull the blank away from the enclosure.
NOTE: Stacking the EMM will damage the sensitive EMI contacts Figure 12. Removing and installing an EMM 1. release lever 2. EMM 3. release tab Installing an EMM CAUTION: Many repairs may only be done by a certified service technician.
AC power supply unit or cooling fan module Your enclosure supports two hot-swappable power supply unit or cooling fan modules. While the enclosure can operate temporarily with one module, both the modules must be present for cooling the enclosure.
Installing an AC power supply unit or cooling fan module 1. Slide the power supply unit or cooling fan module into the chassis until the release tab clicks into place. 2. Connect the power cable to the power supply unit or cooling fan module and plug the cable into a power outlet.
Figure 15. Power indicator codes Item LED Color State 1 Power output Green • ON — Normal operation. Power supply is connected to DC power and the power switch is on. The power supply module is supplying DC power to the array. • OFF — Indicates any one of the following: – The power switch is off.
DC power supply module back panel features Figure 16. DC power supply module back panel features Item Feature Description 1 Power supply release lever Unlocks the power supply module for removal from the storage array. 2 Connector on the power supply module Connects the power supply module to the DC power supply module.
Required Wires • One UL 4 AWG, 2 m maximum (stranded) black wire [–(48–60) V DC] • One UL 4 AWG, 2 m maximum (stranded) red wire (V DC return) • One UL 4 AWG, 2 m maximum (stranded) green/ye.
Wiring the power cables WARNING: For equipment using –(48–60) V DC power supplies, a qualified electrician must perform all connections to DC power and to safety grounds. Do not attempt connecting to DC power or installing grounds yourself. All electrical wiring must comply with applicable local or national codes and practices.
Figure 19. Connecting the dc power cables 1. attached (trapped) finger screws 2. connector on the power supply cable 3. connector on the power supply module Removing a DC power supply WARNING: For equipment using –(48–60) V DC power supplies, a qualified electrician must perform all connections to DC power and to safety grounds.
Figure 20. Removing and installing a dc power supply module 1. release latch 2. power supply module 3. power supply module handle Installing a DC Power Supply Module WARNING: For equipment using –(48–60) V DC power supplies, a qualified electrician must perform all connections to DC power and to safety grounds.
NOTE: The line input LED lights up when the power cable is connected, even if the switches on the power supply modules are off. NOTE: When installing, hot-swapping, or hot-adding a new power supply, allow several seconds for the system to recognize the power supply module and determine its status.
Technical specifications NOTE: The following specifications are only those required by law to ship with your system. For a complete and current listing of the specifications for your system, go to dell.
Figure 21. Removing and installing the control panel 1. control panel 2. chassis 3. release tab Installing the control panel 1. Align the control panel with the slot on the enclosure. 2. Slide the control panel into the enclosure until the release tab clicks into place.
3. Remove the hard disk drives. See Removing a hard disk drive . 4. Remove the EMMs. See Removing an EMM . 5. Remove the power supply or cooling fan modules. See Removing an AC power supply unit or cooling fan module . 6. Remove the control panel. See Removing the control panel .
Figure 23. Removing and installing the backplane 1. screws (5) 2. captive screws (2) 3. backplane Installing the backplane 1. Align the holes on the backplane with the holes on the enclosure. 2. Tighten the captive screw to secure the backplane to the chassis.
3 Troubleshooting your enclosure Safety first—for you and your enclosure CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
• If the AC power LED is not lit, check the power cord and power source into which the power supply is plugged. – Connect another device to the power source to verify if it is working. – Connect the cable to a different power source. – Replace the power cable.
Troubleshooting Enclosure Management Modules CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
6. Ensure that all the cables are attached correctly according to the enclosure mode you selected. For more information about enclosure modes, see Dell Storage MD1400 and MD 1420 Enclosure Hardware Deployment guide . 7. If you reseated the cables, reboot the host server.
• Hard disk drives • EMMs • Power supply unit or cooling fan modules • Control panel • Backplane 2. Ensure that all the cables are properly connected and that there are no damaged pins in the connectors. 3. Run diagnostics available in Server Administrator.
4 Getting help Contacting Dell NOTE: Dell provides several online and telephone-based support and service options. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Een belangrijk punt na aankoop van elk apparaat Dell MD1400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dell MD1400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dell MD1400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dell MD1400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dell MD1400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dell MD1400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dell MD1400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dell MD1400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
