Gebruiksaanwijzing /service van het product CLASSIC PLUS 26 van de fabrikant Denso
Ga naar pagina of 26
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
OPERA TION MANUAL CLASSIC PLUS 14 and CLASSIC PLUS 26.
ii.
iii TABLE OF CONTENTS FOREWORD ............................................................................................ 1 Definition of T erms .......................................................................... 1 GENERAL WARNINGS & CAUTIONS .
iv.
1 FOREWORD Congratulations on pur chasing the MovinCool portable air conditioner . This manual explains how to assemble, install, operate, and maintain the MovinCool Classic Plus 14 and Classic Plus 26 portable air condi- tioning units.
2 GENERAL W ARNINGS & CAUTIONS • All electrical work, if necessary , should only be performed by qualified electrical personnel. Repair to electrical components by non-certified technicians may result in personal injur y and/or damage to the unit.
3 INVENTOR Y & ASSEMBL Y Inventory After unpacking your MovinCool unit, please check to make sur e you have the following items: ❏ Classic Plus 14 or Classic Plus 26 MovinCool Unit (1) ❏ Cool .
4 INVENTOR Y & ASSEMBL Y Assembly CAUTION: Befor e assembling make sure the unit is on a flat, level surface and the casters ar e in the LOCKED position. (Both the Classic Plus 14 and Classic Plus 26 MovinCool units have locking swivel casters in the front only .
5 INST ALLA TION Choosing and Installation Site CAUTION: Following are some pr ecautions to consider before choosing your installation site. Please review car efully as improper installation may r esult in personal injury or damage to the unit. • Do not use the unit in areas wher e leakage of flammable gas may occur .
6 INST ALLA TION (cont.) Moving the Unit Unlock the casters and push the MovinCool unit fr om the front panel edge to a flat, level surface and set the casters back to the LOCKED position.
7 INST ALLA TION (cont.) Plugging in the Unit • Check the pr ongs and sur face of the power cor d plug for dust/dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth. • Check the power cor d, plug and prongs for damage or excess play .
8 FEA TURES Both models feature: • An electronic contr ol panel which allows the user to control the unit’ s operation easily . • Dual fan speeds (either High or Low) in both COOL and Fan Only modes. •A digital display that indicates the temperatur e SET POINT (either Fahrenheit or Celsius) in which the COOL Mode will operate.
9 OPERA TION Control Panel Befor e operating the unit, it is impor tant to familiarize yourself with the basic controls located on the contr ol panel. ➀ C OOL ON/OFF Activates/deactivates the COOL mode/ Button turns the unit off. ➁ F AN ON/OFF Activates/deactivates the HIGH or LOW Buttons fan mode.
10 OPERA TION (cont.) Operating in COOL Mode The unit can be operated in COOL mode by pr essing the COOL ON/OFF button (LED illuminates). NOTE: In COOL mode the unit can only be turned off by pressing the COOL ON/OFF button again, not by pressing the fan buttons.
11 OPERA TION (cont.) Operating Modes Both Classic Plus models operate in 2 modes, F AN Only and COOL . When in F AN Only mode the unit circulates the surrounding air .
12 OPERA TION (cont.) Emptying the Drain T ank During COOL mode, condensate will accumulate in the drain tank. When the drain tank becomes full, the FULL T ANK LED will flash and the unit will shut off automatically . NOTE: If you want to empty the drain tank, while the unit is in operation, press the COOL ON/OFF button to turn the unit off.
13 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 14 model ONL Y) A drain pump kit (CPK-3) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
14 OPERA TION (cont.) DRAIN PUMP KIT (Optional) (Classic Plus 26 model ONL Y) A drain pump kit (CPK-4) is available to allow continuous operation and to eliminate the need for a drain tank. • When the water collects to level (A) in the pump reservoir , the drain pump begins to operate and dischar ge the water .
15 DAIL Y INSPECTION & MAINTENANCE Emptying the Drain T ank To empty the drain tank, refer to instructions on page 12. Cleaning the Air Filters Clean the air filters once a week. If the unit is used in a dusty environ- ment, mor e frequent cleaning may be requir ed.
16 DAIL Y INSPECTION & MAINTENANCE (cont.) In-Season/Off-Season Inspection & Maintenance ■ In-Season ➀ Check the prongs and surface of the power cor d plug for dust and/or dirt. If dust and/or dirt are pr esent, wipe off with a clean, dry cloth.
17 Self-Diagnostic Codes Self-Diagnostic Codes will be displayed on the Contr ol Board under the following conditions: Code Condition dF When the evaporator thermistor disengages the compr essor . FL When the drain tank switch shuts off the unit ( FULL T ANK LED flashes).
18 TECHNICAL SPECIFICA TIONS MODEL ITEM/FEA TURES Classic Plus 14 Classic Plus 26 Rating Conditions dry bulb 95 o F (35 o C) 95 o F (35 o C) wet bulb 83 o F (28.3 o C) 83 o F (28.3 o C) humidity (60%) (60%) Specifications power frequency 60Hz 60Hz line voltage, single phase 115 V 208/230V power consumption 1.
LIMITED W ARRANTY DENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOL Products only to the extent stated in its of ficial written warranties.
T echnical Services Department DSCA P/N: LA990009-1217 Fourth Issue: April 2003 GAC P/N: LA484007-1431 Printed in the U.S.A. DENSO SALES CALIFORNIA, INC.
Een belangrijk punt na aankoop van elk apparaat Denso CLASSIC PLUS 26 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Denso CLASSIC PLUS 26 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Denso CLASSIC PLUS 26 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Denso CLASSIC PLUS 26 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Denso CLASSIC PLUS 26 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Denso CLASSIC PLUS 26 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Denso CLASSIC PLUS 26 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Denso CLASSIC PLUS 26 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
