Gebruiksaanwijzing /service van het product OHD1502 van de fabrikant Directed Electronics
Ga naar pagina of 27
. 15.4 ” (16:9) Overhead Video Monitor MODEL OHD1502 © 2004 Directed Electronics, Inc. N82104 05-04 OWNER ’S GUIDE INST ALLA TION GUIDE.
© 2004 Directed Electronics, Inc Welcome! Thank you for your purchase of Directed ’ s Overhead Monitor with integrated DVD. Prior t o operating this unit, please fully read this instruction manual and retain it for future reference. Warning! The overhead monitor system is designed st rictly for rear-seat entertainment.
© 2004 Directed Electronics, Inc NON-TRANSFERABLE LIMITED CONSUMER WARRANTY Directed Electronics, In c. (Directed) p romises to the orig inal purchaser that the automo tive video monitor and/or sourc.
© 2004 Directed Electronics, Inc Important Information FCC NOTICE This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.
© 2004 Directed Electronics, Inc TABLE OF CONTENTS Safety Instructions and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
© 2004 Directed Electronics, Inc Safety Instructions and Cautions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR M OISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, US E ONLY THE INCLUDED HARDWARE.
© 2004 Directed Electronics, Inc Important WHEN CLEANING THE VEHICLE Do not spray this unit with water or cleaning solutions. Moisture and the chemicals found in clean- ing fluids could damage the consoles finish and interior electronics. A soft damp, lens cleaning cloth should be used to wipe the screen.
© 2004 Directed Electronics, Inc closed position open position This unit should be installed by an authorized Directed dealer. This product is designed to operate with a 12V DC, negative ground battery system. Disconnect the ground wire from the battery terminal prior to connecting the unit to the electrical system.
© 2004 Directed Electronics, Inc NOTE: The vehicle ’ s ignition key must be “ ON ” or “ ACC ” position for the monitor to have power. OF F AC C ON 4.
© 2004 Directed Electronics, Inc Closing the Overhead Monitor Gently push the backside of the monitor until it clicks into the overhead monitor housing.
© 2004 Directed Electronics, Inc 12 9 3 4 5 6 7 9 8 Function Keys DISPLAY FUNCTION KEYS 1. Courtesy Light Button: Activate this switch to “ ON/OFF ” to activate the dome lights. 2. Open/Close Button 3. Door Light On/Off Button: Engage this switch to have the door open switch activate the dome lights.
© 2004 Directed Electronics, Inc Remote Control MOD E ME N UP B C TI TL E PO WE R CL E AR D ISPLA Y SUBTITLE SLO W PRO G RA M REPEAT MU T E AU D IO ANG LE SET UP ZO O M EN TER ME NU ME NU PI P PI P I.
© 2004 Directed Electronics, Inc Replacement of battery NOTE : Before using remote after installation, remove the batter y plastic protective slip. 1 2 1. Move the small latch to the right and slide out the battery holder. 2. Remove old battery and replace it with a new battery (CR2025) with the positive “ + ” sign facing as shown above.
© 2004 Directed Electronics, Inc Loading and Unloading Disc You can use single side and dual layer DVDs, VCDs, CD-audio and CD-R compatible 12cm discs with this system. Loading Discs 1. Press at the upper right corner to open the door. 2. Load with the recorded side (the shiny side) facing u p.
© 2004 Directed Electronics, Inc DVD Function Key 1 2 3 7 5 4 9 8 6 ○ 1 Lock/Unlock Button ○ 3 Audio Button ○ 4 Menu Button ○ 5 Up Button ○ 6 Down Button ○ 7 Left Button ○ 8 Right Butto.
© 2004 Directed Electronics, Inc DVD Playback Press the Power button on the player or the remote controller, and “ Read ” appears on the TV screen. If there hasn ’ t a disc in the DVD player, “ No disc ” will be displayed on the screen. Load a disc into the unit.
© 2004 Directed Electronics, Inc 3. In File Switch Region, you can press the Left and Right arrow buttons to sw itch the highlight, then press Enter. For example, if a disc with MP3 and JPEG files but without any Video files is loaded, the color of the letter “ ” and “ ” will appear to white and “ ” black.
© 2004 Directed Electronics, Inc (3) TV Type 4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won ’ t be seen.
© 2004 Directed Electronics, Inc (6) Default Choose this option to resume all the setup options to default settings. Language Setup (1) OSD Language The language setup options are illustrated below: The OSD Language Menu allows the user to select the language for the on-screen display.
© 2004 Directed Electronics, Inc Installation About the Installation The installation of the overhead monitor syst em requires experience in both mechanical and electrical procedures. If you do not posses the necessary experienc e or tools to attempt this installation, contact a local Clarion dealer fo r assistance.
© 2004 Directed Electronics, Inc Installation Procedure 1. Identify the polarity of the dome light circuit and set the switch on the bottom of the overhead monitor housing. 2. Test fit the overhead monitor system on the ce iling of the vehicle, ve rifying it is not going to interfere with the safe operation of the vehicle.
© 2004 Directed Electronics, Inc Connection Diagram If you are uncertain as to what the proper connections are. Please contact a qualified Directed technician for further installation assistance.
© 2004 Directed Electronics, Inc Complete System Diagram IR Transmitter DVD DVD Video Out IN Power OUT IN YELLOW (B+) BLACK (GEN ) GRAY (Door Switch) RED (ACC) BLACK (GEN ) YELLOW (+12V) VCR 19.
© 2004 Directed Electronics, Inc Sample Installation Warning! Make sure that the screw s you use to mount the bracket, monitor, or optional spacers are not to long! If the screws are to long, they will damage the roof of the vehicle. Take gr eat care when planning this part of the installation.
© 2004 Directed Electronics, Inc Package Contents 1 Overhead Monitor 1 5M Power Cable 1 75cm Power Cable 1 Metal Mounting Bracket 1 Screws For Metal Mounting Bracket 1 IO Box 1 Trim Ring 1 Remote Con.
© 2004 Directed Electronics, Inc Troubleshooting No Picture Press the POWER and SOURCE buttons to make sure the monitor is on and the proper input is selected. If there is still no pictur e press the PICTURE button. If the menu appears, check the source unit and video connections .
© 2004 Directed Electronics, Inc Specifications System Laser Semiconductor Laser Signal Format NTSC, PAL Audio Characteristics DVD Video (PCM@96KHz) 20Hz-40KHZ ∀ 1dB DVD Video (PCM@48Khz) 20Hz-40KHZ ∀ 1dB Frequency Response CD 20Hz-40KHZ ∀ 1dB Signal-to-Noise Ratio 90dB Harmonic Distortion 0.
Een belangrijk punt na aankoop van elk apparaat Directed Electronics OHD1502 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Directed Electronics OHD1502 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Directed Electronics OHD1502 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Directed Electronics OHD1502 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Directed Electronics OHD1502 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Directed Electronics OHD1502 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Directed Electronics OHD1502 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Directed Electronics OHD1502 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
