Gebruiksaanwijzing /service van het product 2009 Challenger SRT8 van de fabrikant Dodge
Ga naar pagina of 440
2009 CHALL ENGER SR T8 CHAL LENGER SR T8 Chrysler LL C 81-226-0914 Second Edition Printed in U.S.A. OWNER ’S MANUAL 2009.
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution there- fore. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction .......................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number ............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
NOTE: It is illegal to remove the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................ 1 2 ▫ W ireless Ignition Node (WIN) ........... 1 2 ▫ FOB W ith Integrated Key .............. 1 3 ▫ Ignition Key Removal ................. 1 3 ▫ Key-In-Ignition Reminder .
▫ T o Open The T runk .................. 2 3 ▫ Using The Panic Alarm ................ 2 4 ▫ Programming Additional T ransmitters ..... 2 4 ▫ T ransmitter Battery Service ............. 2 4 ▫ General Information .................. 2 5 䡵 Remote Starting System .
▫ Event Data Recorder (EDR) ............. 5 4 ▫ Child Restraint ...................... 5 6 䡵 Engine Break-In Recommendations ......... 6 5 䡵 Safety T ips .......................... 6 6 ▫ T ransporting Passengers ............... 6 6 ▫ Exhaust Gas .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a W ireless Ignition Node (WIN) with an integral ignition switch. Y ou can insert the double-sided integrated key into the ignition switch with either side up.
Fob With Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key , which stores in the r ear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead.
NOTE: The power window switches, radio, power sunroof (if equipped), and ignition-power ed power out- lets will remain active for up to 60 minutes after the ignition switch is turned to the LOCK position. Opening either door will cancel this feature. The time for this feature is pr ogrammable.
is automatic, regar dless of whether the vehicle is locked or unlocked. The system uses the factory-mated Remote Keyless Entry (RKE) transmitter with integrated key and W ireless Igni- tion Node (WIN) to prevent unauthorized vehicle opera- tion.
All of the RKE transmitters provided with your new vehicle have been programmed to the vehicle electr onics. Replacement Keys NOTE: Only RKE transmitters that are pr ogrammed to the vehicle electronics can be used to start and operate the vehicle. Once a transmitter is programmed to a vehicle, it cannot be programmed to any other vehicle.
2. Insert the second valid integrated key and turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound and the V ehicle Security Light will begin to flash. T urn the ignition switch to the LOCK position and remove the second key .
VEHICLE SECURITY ALARM The V ehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition switch for unau- thorized operation.
NOTE: • The driver’s door key cylinder and the trunk button on the RKE transmitter cannot arm or disarm the V ehicle Security Alarm. • The V ehicle Security Alarm remains armed during trunk entry . Pressing the TRUNK button will not disarm the V ehicle Security Alarm.
The lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned ON from the LOCK position. NOTE: • None of the courtesy lights will operate if the dimmer control is in the “defeat” position (extr eme downward position), unless the overhead map/r eading lights are turned on manually .
seconds, to unlock both doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you pr ogram the system to unlock either the driver’s door or both doors on the first press of the UNLOCK button on the transmitter .
Settings (Customer-Pr ogrammable Features),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4. • When not using the EVIC, perform the following steps: 1. Press and hold the UNLOCK button on a pr ogrammed transmitter for at least 4 seconds, but no longer than 10 seconds.
Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter . This feature can be turned on or turned off.
Using The Panic Alarm T o turn the Panic Alarm featur e ON or OFF , pr ess and hold the P ANIC button on the transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on.
2. Remove and replace the battery . When r eplacing the battery , match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover . A void touching the new battery with your fingers. Skin oils may cause battery deterioration.
REMOTE ST ARTING SYSTEM This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security . The system has a range of 328 ft (100 m). NOTE: The vehicle must be equipped with an auto- matic transmission to be equipped with Remote Start.
• For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times with the RKE transmitter . However , the ignition switch must be cycled to the ON position before you can repeat the start sequence for a thir d cycle.
DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock.
Power Door Locks The power door lock switch is located on each door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the key is in the ignition, and either door is open, the power locks will not operate.
Automatic Door Locks — If Equipped The auto door lock feature can be enabled or disabled by your authorized dealer . See your authorized dealer for programming. Automatic Unlock Doors on Exit The doors will unlock automatically if: 1. The Automatic Unlock Doors On Exit feature is en- abled 2.
5. A single chime will indicate the completion of the programming. NOTE: If you do not hear the chime, it means that the system did not enter the programming mode and you will need to repeat the pr ocedure. 6. Repeat these steps if you want to return this featur e to its previous setting.
NOTE: • The door window will lower slightly if it is closed completely when opening the door . The window will return to its fully closed position after closing the door . This action allows the door to open without resistance and prevents window and seal damage.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
TRUNK SAFETY W ARNING W ARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat.
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belts for the driver and all passengers, the front airbags for both the driver and fr ont passenger , and the supplemental side curtain airbags for the driver and passengers seated next to a window .
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thr own from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position.
Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to cr eate a fold that begins immediately above the latch plate.
Use Reminder System (BeltAlert 威 ) will alert the driver to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, the BeltAlert 威 will continue to chime and flash the Seat Belt Reminder Light for 96 sec- onds or until the driver’s seat belt is buckled.
The BeltAlert 威 can be reactivated by r epeating this pro- cedure. NOTE: When the BeltAlert 威 is deactivated, the Seat Belt Reminder Light will continue to illuminate as long as the driver’s seat belt is unbuckled. Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked.
Seat Belt Extender If a seat belt is too short even when fully extended your authorized dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the extender and stor e it.
NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity .
This vehicle is also equipped with supplemental side curtain airbags (located above the side windows) to protect the driver and passenger sitting next to a window . Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag deployment.
protection for the driver and fr ont passenger . Side curtain airbags also work with seat belts to improve occupant protection. While the seat belts are designed to pr otect you in many types of collisions, the front airbags will deploy in moderate-to-severe fr ontal collisions.
seat as far back as possible and use the proper child restraint. (Refer to information on Child Restraint in this section.) 5. Y ou should read the instructions provided with your child restraint to make sur e that you are using it pr operly . 6. All occupants should use their seat belts properly .
Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors • Side Door Pressur e Sensors • Airbag W arning L.
• The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON position. These include all of the items listed above except the knee bolster , the instru- ment panel, and the steering wheel and column.
their full size. The bags fully inflate in about 50 to 70 milliseconds. This is about half of the time that it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and fr ont passenger . The driver front airbag gas is vented thr ough vent holes in the sides of the airbag.
If you do have a collision that deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
Enhanced Accident Response System In the event of an impact that causes airbag deployment, with the vehicle stopped, the vehicle communication network intact, and the power intact, the Enhanced Accident Response System performs the following func- tions: • Cuts off fuel to the engine.
NOTE: Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/perchlorate. Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in an impact.
In conjunction with other data gathered during a com- plete accident investigation, the electronic data may be used by Chrysler LLC and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle performance.
Data Parameters that May Be Recorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled safety systems, including the airbag system • Airbag disable light status.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
• Rearward-facing child seats must NEVER be used in the front seat of a vehicle with the fr ont passenger airbag unless the airbag is turned off. An airbag deployment could cause severe injury or death to infants in this position.
• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back.
• Carefully follow the instr uctions that come with the restraint. If you install the r estraint improperly , it may not work when you need it. • Buckle the child into the seat according to the child restraint manufactur er’s directions.
child seats. Y ou should NEVER install LA TCH-compat- ible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent rear - seating positions, or if your child restraints ar e not LA TCH-compatible, install the restraints using the vehi- cle’s seat belts.
window . These tether strap anchorages are under a plastic cover with this symbol on it. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate fr om the buckle and twist the short buckle end belt several times to shorten it.
NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the br eak-in and not interpreted as an indication of dif ficulty .
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision.
Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and sidewall for cuts and cracks.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................. 7 5 ▫ Automatic Dimming Mirror ............. 7 5 ▫ Outside Mirrors ..................... 7 6 ▫ Outside Mirrors Folding Featur e ......... 7 6 ▫ Power Mirrors .
䡵 V oice Recognition (VR) System — If Equipped .......................... 1 0 7 ▫ V oice Recognition (VR) System Operation . . 107 ▫ Commands ....................... 1 0 9 ▫ V oice T raining ..................... 1 1 2 䡵 Seats ............
䡵 W indshield W ipers And W ashers ......... 1 2 5 ▫ Intermittent W iper System ............. 1 2 6 ▫ Mist Feature ....................... 1 2 7 ▫ W indshield W ashers ................. 1 2 7 ▫ Headlights On W ith W ipers (A vailable W ith Auto Headlights Only) .
䡵 Power Sunroof — If Equipped ........... 1 4 0 ▫ Opening Sunroof — Partially ........... 1 4 1 ▫ Opening Sunroof — Expr ess ........... 1 4 1 ▫ Closing Sunroof — Partially ........... 1 4 1 ▫ Closing Sunroof — Expr ess ...........
MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated.
Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirr or . NOTE: The passenger-side convex outside mirr or will give a much wider view to the rear , and especially of the lane next to your vehicle.
Power Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move.
Illuminated V anity Mirrors An illuminated vanity mirror is located on the sun visor . T o use the mirror , rotate the sun visor downwar d and swing the mirror cover upwar d. The light turns on automatically . Close the mirror cover to turn of f the light.
uconnect 姞 phone — IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated uconnect 威 phone. Refer to your “Navigation User’s Manual” for uconnect 威 phone operating instruc- tions for these radios. Radio sales code can be located on the lower right corner of the Radio faceplate.
uconnect 威 allows you to transfer calls between the sys- tem and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The uconnect 威 phone is driven through your Bluetooth 威 “Hands-Free Pr ofile” cellular phone.
The uconnect 威 phone is fully integrated with the vehi- cle’s audio system. The volume of the uconnect 威 phone can be adjusted either from the radio volume contr ol knob or from the steering wheel radio contr ol (right switch), if so equipped.
Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say ⬙ Help ⬙ following the beep. The uconnect 威 phone will play all the options at any prompt if you ask for help. T o activate the uconnect 威 phone from idle, simply press the PHONE button and follow the audible prompts for directions.
• For identification purposes, you will be prompted to give the uconnect 威 phone a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give your cellular phone a priority level between one and seven, with one being the highest priority .
• The system will prompt you to say the name of the person you want to call. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the uconnect 威 phonebook or downloaded phonebook.
The uconnect 威 phone will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations.
• This downloaded phonebook cannot be edited or deleted on the uconnect 威 phone. These can only be edited on the cellular phone. The changes are trans- ferred and updated to uconnect 威 phone on the next phone connection.
Edit uconnect 威 Phonebook Entries NOTE: • Editing names in the phonebook is recommended when the vehicle is not in motion. • Automatic downloaded phonebook entries cannot be deleted or edited. • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Edit.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose.
List All Names in the uconnect 威 Phonebook • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The uconnect 威 phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available.
Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular phone. Press the PHONE button to place the current call on hold and answer the incoming call.
Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call.
Call Continuation Call continuation is the progr ession of a phone call on the uconnect 威 phone after the vehicle ignition key has been switched to OFF .
Emergency Assistance If you are in an emer gency and the cellular phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the uconnect 威 phone is operational, you may reach the emer gency number as follows: • Press the PHONE button to begin.
T owing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.
When calling a number with your uconnect 威 phone that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can press the VOICE RECOGNITION button and say the sequence you wish to enter , followed by the word ⬙ Send.
T urning Confirmation Prompts ON/OFF T urning confirmation prompts off will stop the system from confirming your choices (e.g., the uconnect 威 phone will not repeat a phone number befor e you dial it). • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations.
Mute/Un-Mute (Mute OFF) When you mute the uconnect 威 phone, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the uconnect 威 phone: • Press the VOICE RECOGNITION button.
• The uconnect 威 phone will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the VOICE RECOGNITION button and say “Select” or “Delete.
Things Y ou Should Know About Y our uconnect 姞 phone uconnect 威 phone T utorial T o hear a brief tutorial of the system features, press the PHONE button and say “uconnect 威 T utorial.
• Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice recognition period.
Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation from the driver’s seat.
102 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 103 3.
104 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment.
When you press the VR button, you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR button, listen for the beep, and say your command.
Commands The V oice Recognition (VR) system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR button.
Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select t.
Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the VR button to stop recor ding.
NOTE: Keep in mind that you have to press the VR button first and wait for the beep before speaking the “Barge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, uconnect 威 phone V oice T raining featur e may be used.
Power Seats The power seat switches are on the outboar d side of the front seat cushions. The power seat switch can be moved forward and backwar d as well as up and down to control the position of the seat. The power seatback switch is used to adjust the angle of the seatback.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for- ward to incr ease and rearwar d to decrease the desired amount of lumbar support. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of a rear impact.
Heated Seats The driver seat and front passenger seat ar e heated. The heaters provide the same heat level for both cushion and seatback. The controls for each heater ar e located near the bottom center of the instrument panel. After turning the ignition ON, you can choose from High, Low , or Off heat settings.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion, or other physical conditions must exer- cise care when using the seat heater .
W ARNING! • Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury .
2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 6 in (15 cm), and then drop it.
LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instrument panel lights, instru- ment panel light dimming, interior lights and fog lights.
Headlights On with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUT O (A) position.
Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is ON, the headlights are of f, and the parking brake is off. The headlight switch must be used for normal nighttime driving.
Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight beam selection, and passing lights. The multifunction lever is located on the left side of the steering column.
High Beam/Low Beam Select Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you to switch the headlights back to low beam. Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you.
because a door is open. This includes the glove box light, but not the trunk light. T o restore interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the headlight switch and is located on the left side of the instrument panel.
the ON position. The multifunction lever is located on the left side of the steering column. Rotate the end of the multifunction lever to the first detent past the intermittent settings for low-speed wiper operation, or to the second detent past the intermittent settings for high-speed wiper operation.
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with the defroster before and during windshield washer use.
The Headlights On with W ipers feature can be enabled or disabled. Refer to ”Headlights On with W ipers,” under “Personal Settings (Customer-Pr ogrammable Features)” under “Electronic V ehicle Information Center (EVIC)” in Section 4.
outward or push it inwar d as desired. T o lock the steering column in position, push the control handle inwar d until fully engaged. W ARNING! Do not adjust the steering wheel while driving.
T o Activate Push and release the ON/OFF button located on the end of the Electronic Speed Contr ol lever . The indicator light in the instrument cluster will illuminate to show that the speed control system is on. T o turn the system off, push and release the ON/OFF button again.
• Press the brake pedal, or pr ess the clutch pedal to the floor (manual transmission). • Pull the speed control lever towar d you (CANCEL). Pushing and releasing the ON/OFF button or turning the ignition OFF erases the set speed from memory .
Using Electronic Speed Control on Hills NOTE: The Electronic Speed Contr ol system maintains speed up and down hills. A slight speed change on moderate hills is normal. The automatic transmission will downshift while climb- ing uphill or descending downhill.
Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn on the light. Pr ess it a second time to turn off the light.
The HomeLink 威 buttons are located in the over head console, and contain one, two, or three dots/lines desig- nating the differ ent HomeLink 威 channels. NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver .
Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for up to 20 seconds. The EVIC will display “CLEARING CHANNELS.
NOTE: Some gate operators and garage door openers may requir e you to replace Step 3 with pr ocedures noted in the “Gate Operator/Canadian Programming” section. 4. Press and hold the just-trained HomeLink 威 button. If the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT .
6. Firmly press and r elease the “learn” or “training” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed.
has successfully accepted the frequency signal. The EVIC display will change from “CHANNEL # TRAIN- ING” to “CHANNEL # TRAINED.” If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section.
The HomeLink 威 Universal T ransceiver is disabled when the V ehicle Security Alarm is active. T roubleshooting Tips If you are having tr ouble programming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter .
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening Sunroof — Partially Press and hold the switch in the r earward position. Release the switch when the sunroof is in the position desired and it will stop moving. If you continue to hold the switch in the rearwar d position, the sunroof will open fully and then stop automatically .
Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
this feature is pr ogrammable. Refer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Customer-Pr ogrammable Features)” under “Electr onic V ehicle Information Center (EVIC)” in Section 4. Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed.
W ARNING! T o avoid serious injury or death: • Do not use a three-prong adapter . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CAUTION! (Continued) • After the use of high power draw accessories or long periods of the vehicle not being started (with accessories still plugged in), the vehicle must be driven a sufficient length of time to allow the alternator to recharge the vehicle’s battery .
Illuminated Front Cupholders — If Equipped The front cupholders ar e illuminated with LEDs. They are turned on with the headlights or parking lights. Refer to “Interior Lights” under “Lights” in Section 3. Rear Cupholders The rear seat cupholders ar e located in the center armrest between the rear seats.
Console Storage The center console has a storage compartment located underneath the armrest, and also contains a 12-V olt power outlet, a molded-in coin holder (designed to hold various size coins). The center console may also be equipped with a Universal Consumer Interface (UCI).
REAR WINDOW FEA TURES Rear Window Defroster The rear window defr oster button is located on the climate control (Mode) knob. Pr ess this button to turn on the rear window defr oster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defr oster is on.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es .............. 1 5 3 䡵 Instrument Cluster ................... 1 5 4 䡵 Instrument Cluster Description ........... 1 5 5 䡵 Electronic V ehicle Information Center (EVIC) .
䡵 Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD Changer (MP3/WMA AUX Jack) . . . 182 ▫ Operating Instructions - Radio Mode ..... 1 8 2 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play) ............ 1 8 7 ▫ Notes On Playing MP3/WMA Files .
▫ Operation Instructions — CD Mode For CD And MP3 Audio Play ................. 2 1 1 ▫ Notes On Playing MP3 Files ........... 2 1 3 ▫ List Button (CD Mode For MP3 Play) ..... 2 1 6 ▫ Info Button (CD Mode For MP3 Play) .... 2 1 6 䡵 Universal Consumer Interface (UCI) — If Equipped .
䡵 Kicker 威 High Performance Sound System W ith Driver-Selectable Surr ound (DSS) – If Equipped .......................... 2 2 7 䡵 Remote Sound System Controls .......... 2 2 8 䡵 CD/DVD Disc Maintenance ............. 2 2 9 䡵 Radio Operation And Cellular Phones .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlets 5 — Heated Seat Switch 9 — Ignition Switch 2 — Instrument Cluster 6 — ESP OFF Switch 10 — T runk Release Switch 3 — Glove Compartment 7 — Ha.
INSTRUMENT CLUSTER 154 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of two trip odometer settings.
7. Electronic Thr ottle Control (ETC) W arning Light This light will turn on briefly as a bulb check when the ignition switch is turned ON. This light will also turn on while the engine is running if ther e is a problem with the Elec- tronic Thr ottle Control (ETC) system.
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (1 16°C) or greater , pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–1 10°C).
10. Airbag W arning Light This light will turn on for six to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, or stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
14. Oil Pressur e W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on.
19. Odometer / Electronic V ehicle Information Center (EVIC) Display The odometer shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to “T rip Odometer Button” for additional information. NOTE: U.
If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir , it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Pr ogram (ESP) sys- tem.
Operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected.
reduces fuel ef ficiency and tire tr ead life, and may affect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the d.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
the key is in the ON position before engine start. If the MIL does not come on when turning the key from LOCK to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start.
• T ire Pressur e Monitor System • Personal Settings (Customer-Pr ogrammable Features) • Compass Display • Outside T emperature Display • T rip Computer Functions • uconnect 威 phone Disp.
SCROLL Button Press the SCROLL button to scroll thr ough T rip Functions, Performance Pages, uconnect 威 gps (If Equipped), System Status Messages, and Personal Settings (Customer-Pr ogrammable Features). The SCROLL button also functions as a remote sound system control.
• T runk Ajar (with a single chime) • Oil Change Required • Low W asher Fluid (with a single chime) • Channel # T ransmit • Channel # T raining • Channel # T rained • Clearing Channels .
• Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer Engine Oil Change Indicator System Oil Change Required Y our vehicle is equipped with an engine oil change indicator system.
T rip Functions Press and r elease the MENU button until one of the following T rip Functions displays in the EVIC: • A verage Fuel Economy • Distance T o Empty • T rip A • T rip B • Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions.
When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of ⬙ LOW FUEL. ⬙ This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ⬙ LOW FUEL ⬙ text and a new DTE value will display .
Performance Features W ARNING! Measurement of vehicle statistics with the Perfor- mance Features is intended for off-highway or of f- road use only and should not be done on any public roadways. It is recommended that these features be used in a controlled environment and within the limits of the law .
• The feature will “r eady” when the vehicle speed is at 0 mph (0 km/h). The word “READY” will flash when conditions are met for the event to begin. • Dashes will display if the vehicle fails to reach 60 mph (100 km/h) in less then 10 seconds.
1/8 Mile, 1/4 Mile When selected, this screen displays the time it takes the vehicle to travel 1/8 mile (1/4 mile) within 30 seconds and the vehicle’s speed when it reaches 1/8 mile (1/ 4 mile). • The feature will “r eady” when the vehicle is at 0 mph (0 km/h).
Digital Speedometer When selected, this screen displays vehicle speed and recor ds top speed. • Press and hold the FUNCTION SELECT button for three seconds to toggle between curr ent speed and top speed. • T o reset top speed, quickly press and r elease the FUNCTION SELECT button when top speed is displayed.
NOTE: Under certain conditions, the display may be superseded by another display of higher priority . But when the ignition switch position is changed, the display always re-appears. Compass Display COMP ASS Button The compass readings indicate the dir ection the vehicle is facing.
5. Complete one or more 360–degr ee turns (in an area free fr om large metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally . Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North.
4. Press and r elease the FUNCTION SELECT button until the proper variance zone is selected, accor ding to the map. 5. Press and r elease the compass button to exit. Driver-Selectable Surround Sound (DSS) – If Equipped Press and r elease the MENU button until “Surround Sound” displays in the EVIC.
Press and r elease the MENU button until Personal Set- tings displays in the EVIC. Use the SCROLL button to display one of the following choices. Language When in this display , you may select one of three languages for all display nomenclature, including the trip functions and the uconnect 威 gps (if equipped).
the doors will unlock on the first press of the RKE transmitter UNLOCK button. T o make your selection, press and r elease the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Pr ess” appears.
Hill Start Assist (HSA) — If Equipped When on is selected, the HSA system is active. Refer to “HSA (Hill Start Assistance)” under “Electronic Brake Control System” in Section 5 of this manual for system function and operating information.
SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry .
Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. Push the rotary TUNE/SCROLL control knob a fifth time and F ADE will display .
Program T ype 16-Digit Character Display Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rh.
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window .
CAUTION! This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal.
R W/FF (CD MODE) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Rewind) button works in a similar manner . AM or FM Button (CD MODE) Switches the radio to the radio mode.
Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3/ WMA files). Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs.
ID3 T ag information for artist, song title, and album title are supported for ID3 version 1 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium.
INFO Button (DISC Mode for MP3/WMA Play) Pressing the INFO button r epeatedly will scroll thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if available). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode.
TIME Button (Auxiliary Mode) Press the TIME button to change the display fr om elapsed playing time to time of day . The time of day will display for five seconds.
AM/FM/CD/DVD RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional.
T o Manually Set the Clock — RER/REN 1. T urn on the radio. 2. T ouch the screen where the time is displayed. 3. T ouch the screen where “User Clock” is displayed. The clock setting menu will appear on the screen. 4. T o move the hour forward, touch the screen wher e the word “Hour” with the arr ow pointing upward is dis- played.
Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the radio is turned of f. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen where the time is displayed.
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display .
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
SALES CODE RES/RSC — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Recognition System (Radio) — If Equipped Refer to “V oice Recognition System (VR)” in Section 3.
5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressing the SETUP button. For vehicles equipped with satellite radio, press the SETUP button, use the TUNE/SCROLL control to select SET CLOCK, and then follow the above procedur e, starting at Step 2.
Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. Push the rotary TUNE/SCROLL control knob a fifth time and F ADE will display .
Program T ype 16-Digit Character Display Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rh.
SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button.
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.
NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD.
Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features. Please visit Apple’s website for software updates. NOTE: • If the radio has a USB port, connecting an iPod 威 to this port does not play the media.
• The iPod 威 can be controlled using the radio buttons to Play , Browse, and List the iPod 威 contents. • The iPod 威 battery charges when plugged into the UCI connector . Controlling The iPod 姞 Using Radio Buttons T o get into the UCI (iPod 威 ) mode and access a connected iPod 威 , press the “AUX” button on the radio faceplate.
• Use the << SEEK and SEEK >> buttons to jump to the previous or next track. If the << SEEK button is pressed during the first two seconds of the track, it will jump to the previous track in the list; if you pr ess this button at any other time in the track, it will jump to the beginning of the track.
• T urning it clockwise (forward) and counterclock- wise (backward) scr olls through the lists, displaying the track detail on the radio display . Once you have the track to be played highlighted on the radio display , press the TUNE contr ol knob to select and start playing the track.
the same steps to go to the desired track in that list. Not all iPod 威 sub-menu levels are available on this system. • MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your iPod 威 .
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle.
Selecting uconnect 姞 studios (Satellite) Mode Press the SA T button until ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while in the Satellite radio mode. Satellite Antenna T o ensure optimum reception, do not place items on the roof ar ound the rooftop antenna location.
SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next channel, pausing for eight seconds before con- tinuing to the next. T o stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able).
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
KICKER 姞 HIGH PERFORMANCE SOUND SYSTEM WITH DRIVER-SELECT ABLE SURROUND (DSS) – IF EQUIPPED Y our vehicle is equipped with a state of the art audio amplifier that provides 5.1-channel surr ound sound from any stereo audio sour ce. A new featur e of the Kicker 威 audio system offers the ability to choose surr ound sound for any audio source.
REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the three and nine o’clock positions. V ehicles equipped with steering wheel-mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC).
FUNCTION SELECT Button When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SELECT button to operate various radio, media, and Universal Customer Interface (UCI) functions (i.e., advance presets, select next folder , jump to or start playing songs in playlists, etc.
NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have copyright encoding. T ry a known good disc before considering disc player service.
Blower Control Use this control to r egulate the amount of air forced thr ough the ven- tilation system in any mode. The blower speed increases as you move the control to the right fr om the “O” (Off) position.
Mode Control Use this control to choose fr om several patterns of air distribution. Y ou can select either a primary mode as iden- tified by the symbols on the control, or a blend of two of these modes. • Panel Air is directed thr ough the outlets in the instrument panel and the center console.
• Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maxi- mum blower and temperature settings for best wind- shield and side window defrosting.
NOTE: The air conditioning compressor will not engage until the engine has been running for a few seconds. • MAX A/C For maximum cooling use the A/C and recir culation buttons at the same time and set the temperature contr ol to full cool by rotating the temperatur e control knob full counterclockwise.
If Outside Ambient T emperature Is Mode Overrides T o T emperature Overrides T o Rear W indow Defroster Active Less than 40°F Mix Full Heat Y es Between 40°F and 80°F No Override No Override No Mor.
V acation Storage Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower settings.
Outside Air Intake Make sure the air intake, located dir ectly in front of the windshield, is free of obstr uctions such as leaves. Leaves collected in the air intake may reduce airflow , and if they enter the plenum, they could plug the water drains.
Control Setting Suggestions for V arious W eather Conditions 238 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ................... 2 4 3 ▫ Manual T ransmission — If Equipped ..... 2 4 3 ▫ Automatic T ransmission — If Equipped . . . 244 ▫ Keyless Go ....................... 2 4 5 ▫ Normal Starting .
䡵 AutoStick 威 ......................... 2 6 3 ▫ AutoStick 威 Operation ................ 2 6 3 ▫ AutoStick 威 General Information ......... 2 6 4 䡵 Driving On Slippery Surfaces ............ 2 6 4 ▫ Acceleration ....................... 2 6 4 ▫ T raction .
䡵 T ire Safety Information ................ 2 8 5 ▫ T ire Markings ..................... 2 8 5 ▫ T ire Loading And T ire Pressur e ......... 2 9 0 䡵 T ires — General Information ............ 2 9 4 ▫ T ire Pressur e ...................... 2 9 4 ▫ T ire Inflation Pressur es .
▫ Fuel System Cautions ................ 3 1 1 ▫ Carbon Monoxide W arnings ........... 3 1 2 䡵 Adding Fuel ........................ 3 1 3 ▫ Fuel Filler Cap (Gas Cap) ............. 3 1 3 ▫ Loose Fuel Filler Cap Message .......... 3 1 5 䡵 V ehicle Loading .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle.
W ARNING! Do not attempt to push or tow your vehicle to get it started. Unburned fuel could enter the catalytic con- verter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to obtain a start from another vehicle.
Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running.
NOTE: The ENGINE ST AR T/STOP button should only be removed or inserted with the ignition in the OFF position. Normal Starting Using the ENGINE ST AR T/STOP Button — Automatic T ransmission Only NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.
2. The ignition switch will return to the OFF position. 3. If the shift lever is not in P ARK, the ENGINE ST ART/ STOP button must be held for two seconds before the engine will shut off. The ignition switch position will remain in the ACC position until the shift lever is in P ARK and the button is pressed twice to the OFF position.
switch position will remain in the ACC position until the vehicle is stopped and the button is pressed twice to the OFF position. Keyless Go Functions – W ith Driver ’ s Foot OFF the Brake Pedal/Clutch Pedal (In P ARK or NEUTRAL Position) The Keyless Go feature operates similar to an ignition switch.
If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . (Continued) W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started.
Clearing a Flooded Engine (Using ENGINE ST AR T/STOP Button) — Automatic T ransmission Only If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold W eather ⬙ proce- dures, it may be flooded.
CAUTION! T o prevent damage to the starter , wait 10 to 15 sec- onds before trying again. After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather .
CAUTION! • Never drive with your foot resting on the clutch pedal, or try to hold the vehicle on a hill with the clutch pedal partially engaged, as this will cause abnormal wear on the clutch. Refer to “Electronic Brake Control System/Hill Start Assist ⴖ in this section.
The six-speed manual transmission has a spring that centers the shift lever near third and fourth gear . This spring helps you know which gear you are in when you are shifting. Be car eful when shifting from first to second or downshifting from sixth to fifth.
prevent shifts into REVERSE. When at a complete stop, you may notice light shift efforts into REVERSE with the ignition key ON, and increased shift ef forts into REVERSE with the ignition key OFF . This is normal operation of the transmission reverse inhibitor system.
W ARNING! Skipping more than one gear while downshifting, could cause you to lose control of your vehicle. Y ou could have an accident. CAUTION! • If you skip more than one gear while downshift- ing or downshift at too high an engine speed, you could damage the engine, transmission, or clutch.
W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
• The electronically-contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles.
This may result in a slightly dif ferent feeling or r esponse during normal operation in DRIVE position. After the transmission cools down, it will return to normal operation.
W ith Keyless Go T o activate the override, with a valid keyfob (FOBIK) inside of the vehicle, and without the brake pedal pressed, pr ess the ST AR T/STOP button once to go to the ACC position, or twice to go to the ON position. Then, press the pink-color ed tab through the access port with a small flat-bladed screwdriver or alike.
When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK.
NEUTRAL This range is used when the vehicle is standing for prolonged periods with the engine r unning. The engine may be started in this range. Set the parking brake if you must leave the vehicle. CAUTION! Coasting the vehicle or driving for any other reason with the shift lever in NEUTRAL can result in transmission damage.
Delayed Shifts in Cold T emperatures During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature as well as vehicle speed. This featur e im- proves warm up time of the engine and transmission to achieve maximum efficiency .
Have the transmission checked at your authorized dealer as soon as possible. If the problem has been momentary , the transmission can be reset to r egain all forward gears. AUTOSTICK 姞 Autostick 威 is a driver-interactive transmission that of fers manual gear shifting to provide you with mor e control of the vehicle.
until an upshift or downshift is chosen. When you wish to disengage Autostick 威 , hold the shift lever to the right for at least two seconds. The transmission will now operate automatically , shifting between the five available gears. Autostick 姞 General Information • Y ou can start out in first or second gear .
W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.
CAUTION! • Due to lower ground clearance, driving your ve- hicle up steep driveways, approach ramps or near parking blocks may cause vehicle damage to the front fascia and ground effects. • Driving through snow more than 4 inches (100 mm) deep may cause vehicle damage to the front fascia and ground effects.
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
P ARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. The “Brake W arning Light” in the instrument cluster will turn on when the parking brake is applied and the ignition switch is ON. NOTE: This light only shows that the parking brake is applied.
Manual T ransmission — If Equipped The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o release the parking brake, pull the parking brake release handle. Automatic T ransmission — If Equipped The foot operated parking brake is positioned below the lower left corner of the instrument panel.
W ARNING! Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons.
pedal force r equired to slow or stop, and potential activation of the “Brake W arning Light.” In the event power assist is lost for any reason (for example, repeated brake applications with the engine OFF) the brakes will still function.
• A slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. W ARNING! • The Anti-Lock Brake System (ABS) contains so- phisticated electronic equipment that may be sus- ceptible to interference caused by improperly in- stalled or high output radio transmitting equipment.
W ARNING! (Continued) • The capabilities of an Anti-Lock Brake System (ABS) equipped vehicle must never be exploited in a reckless or dangerous manner , that could jeopardize the user’s safety or the safety of others.
ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system commonly r eferred to as ESP . This system includes the Anti-Lock Brake System (ABS), the T raction Control System (TCS), the Brake Assist System (BAS), and the Electronic Stability Pr ogram (ESP).
A feature of the TCS system functions similar to a limited-slip differ ential and controls the wheel spin across a driven axle. If one wheel on a driven axle is spinning faster than the other , the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning.
W ARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
W ARNING! There may be situations on minor hills (i.e., less than 8%), with a loaded vehicle, or while pulling a trailer , when the system will not activate and slight rolling may occur . This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle.
8. Rotate the steering wheel back to center and then an additional half-turn to the right. 9. T urn the ignition switch to the OFF position and then back to the ON position. If the sequence was completed properly , the “ESP/TCS Indicator Light” will blink sev- eral times to confirm HSA is disabled.
W ARNING! The ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those result- ing from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
switch and the “ESP/TCS Indicator Light” will illumi- nate. T o turn the ESP ON again, momentarily press the ESP OFF switch and the “ESP/TCS Indicator Light” will turn off.
“Electronic V ehicle Information Center (EVIC)” in Sec- tion 4. T o turn ESP ON again, momentarily press the ESP OFF switch. NOTE: The ⬙ ESP OFF ⬙ message will display and the audible chime will sound when the shift lever is moved into the P ARK position from any position other than P ARK and then moved out of the P ARK position.
Synchronizing ESP The Malfunction Indicator Light for the ESP is combined with BAS indicator . If the power supply is interrupted (battery disconnected or discharged), the “ESP/BAS Malfunction Indi- cator Light” may illuminate with the engine running.
NOTE: • The “ESP/TCS Indicator Light” and the “ESP/BAS Malfunction Indicator Light” will turn on momen- tarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned OFF previously .
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.
TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a ti.
T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard te.
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
ST ARTING AND OPERA TING 293 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Over-inflation reduces a tire’s ability to cushion shock. Objects on the road and chuckholes can cause damage that result in tire failure. • Unequal tire pressures can cause steering prob- lems. Y ou could lose control of your vehicle.
The pressur e should be checked and adjusted as well as inspected for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essure. Do not make a visual judgement when determining proper inflation.
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tir es during the winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall.
Tire Rotation — Four Season/RSA Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” as shown in the following diagram. Tire Rotation — F1 Three Season T ires The suggested rotation method is the “side-to-side” as shown in the following diagram.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle r ecom- mended cold placard pr essure. The tire pr essure will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.
For example, your vehicle may have a recommended cold (parked for more than thr ee hours) placard pr essure of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressur e is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressur e to approximately 23 psi (158 kPa).
NOTE: • The TPMS is not intended to replace normal tir e care and maintenance or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e.
The TPMS consists of the following components: • Receiver module, • Four TPM sensors, • CORAX Receiver module, • V arious TPMS messages, which display in the Elec- tronic V ehicle Information .
turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning If a system fault is detected, the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid.
of the dashes. A system fault can occur due to any of the following: 1. Signal interference due to electr onic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals.
Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations.
CAUTION! DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. Problems that r esult from using methanol/gasoline or E85 ethanol blends are not the r esponsibility of the manufacturer .
MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles.
• An out-of-tune engine or certain fuel or ignition mal- functions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunc- tioning and may requir e immediate service.
• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light (MIL) to turn on.
Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC).
Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
Loading T o load your vehicle properly , first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as evenly as possible.
.
WHA T TO DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ............... 3 2 0 䡵 If Y our Engine Overheats ............... 3 2 0 䡵 TIREFIT T ire Repair ................... 3 2 1 䡵 Jump-Starting ....................... 3 2 7 䡵 Freeing A Stuck V ehicle .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the switch bank near the bottom center of the instrument panel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (1 16 °C) or greater pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–1 10°C).
The TIREFIT system is located under an access panel in the trunk. 1. Air pump hose 2. Power plug and cable 3. AIR PUMP switch 4. Pressur e gauge 5. TIREFIT sealant bottle 6.
W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire.
Sealing T ire with TIREFIT 1. T urn on the Hazard W arning flashers. 2. Move the shift lever into P ARK (automatic transmis- sion) or in gear (manual transmission), turn OFF the engine and set the parking brake. 3. Remove the TIREFIT kit from the tr unk.
13. T urn on the Hazard W arning Flashers. 14. Move the shift lever into P ARK (automatic transmis- sion) or in gear (manual transmission), turn OFF the engine and set the parking brake. 15. Disconnect the air pump hose 1 from the underside of the sealant bottle 5 by flipping the hose valve open.
24. Connect the air pump hose valve to the tire valve and flip the hose valve closed. 25. Check the pressur e in the tire by r eading the pressure gauge 4. If the pressur e is 19 psi (1.3 bar) or greater , proceed to the following step. NOTE: If the pr essure is less than 19 psi (1.
• If TIREFIT is liquid, clean water and a damp cloth will remove the material fr om the vehicle or tire and wheel components. Once TIREFIT sealing material has dried, it can easily be peeled off and pr operly discarded. • Do not exceed 55 mph (90 km/h) until the tire has been inspected.
W ARNING! (Continued) • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin, or cloth- ing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush contami- nated area immediately with large quantities of water .
3. Set the parking brake, place the automatic transmis- sion in P ARK (manual transmission in NEUTRAL), and turn the ignition switch to the LOCK position on both vehicles.
the instrument cluster) r emains on continuously after starting the engine of the vehicle with the discharged battery . 8. When removing the jumper cables, r everse the above sequence exactly . Be careful of the moving belts and fan. W ARNING! • Y ou should not try to start your vehicle by pushing or towing.
NOTE: T urn off the Electronic Stability Pr ogram (ESP) before r ocking the vehicle. Refer to “Electronic Stability Program,” or “T raction Control” in Section 5. CAUTION! • When “rocking” a stuck vehicle by moving be- tween “1st” and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result.
T owing This V ehicle Behind Another V ehicle (Flat T owing With All Four Wheels On The Ground) Flat towing of vehicles is permitted within the following limitations: W ith The Ignition Key Y our vehi.
CAUTION! • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • If the transmission is not operative or if the vehicle is to be towed more than 30 miles (48 km), then the only approved method of towing is with a flatbed truck.
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.1L ............ 3 3 8 䡵 Onboard Diagnostic System — OBD II ..... 3 3 9 ▫ Loose Fuel Filler Cap ................ 3 3 9 䡵 Emissions Inspection And Maintenance Programs .............
▫ Brake System ...................... 3 5 8 ▫ Clutch Hydraulic System (Manual T ransmission) — If Equipped ..... 3 5 9 ▫ Manual T ransmission — If Equipped ..... 3 5 9 ▫ Automatic T ransmission — If Equipped . . . 360 ▫ Rear Axle .....
䡵 Fluids, Lubricants, And Genuine Parts ...... 3 8 2 ▫ Engine ........................... 3 8 2 ▫ Chassis .......................... 3 8 3 MAINT AINING YOUR VEHICLE 337 7.
ENGINE COMP ARTMENT — 6.1L 1 — Remote Jump-Start Positive Battery Post 6 — Power Steering Fluid Reservoir 2 — Integrated Power Module 7 — Air Cleaner Filter 3 — Coolant Pressur e Cap 8 —.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
T rip Odometer button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL.
5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service manuals are available which include detailed service information for your vehicle.
The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off or befor e starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings.
recommendation and be within the operating tempera- ture shown in the engine oil viscosity chart. The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compart- ment” in this section.
Engine Oil Filter Selection This manufacturer’s engines have a full-flow type oil filter . Use a filter of this type for replacement. The quality of replacement filters varies considerably . Only high quality filters should be used to assure most ef ficient service.
Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease such as MOP AR 威 Spray White Lube to assure quiet, easy opera- tion and to protect against r ust and wear .
reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the residual water . When refilling the washer fluid r eservoir , apply some washer fluid to a cloth or towel and wipe the wiper blades clean.
inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush, and Refill If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to r emove all deposits and chemicals. Properly dispose of the old antifreeze solution.
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to five years or 102,000 miles (170 000 km) before r eplacement.
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated.
When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment.
• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
the proper level. Refer to “Fluids, Lubricants, and Genu- ine Parts” in this section for the correct fluid type. CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or damage to the transmission.
CAUTION! (Continued) • The fluid level is preset at the factory and it does not require adjustment under normal operating conditions. If a transmission fluid leak occurs, visit your authorized dealer immediately . Severe damage to the transmission may occur .
Rear Axle Fluid Level Check Check the fluid level by removing the fill plug on the axle. The fluid level should be at the bottom of the fill hole. Add fluid, if necessary , to maintain the proper level. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover to remove.
• If your vehicle is damaged due to an accident or similar cause that destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
Y our leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed pr omptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean or equivalent.
quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments that may scratch the elements. When cleaning the rear view mirr or , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirr or .
FUSES Integrated Power Module (IPM) The Integrated Power Module (IPM) is located in the engine compartment. This module contains fuses and relays. CAUTION! • When installing the integrated power module cover , it is important to ensure the cover is prop- erly positioned and fully latched.
Cavity Car- tridge Fuse Mini- Fuse Description 1 — 15 Amp Blue W asher Motor 2 — 25 Amp Neutral Powertrain Control Module (PCM) 3 — 25 Amp Neutral Ignition Run/Start 4 — 25 Amp Neutral EGR Sol.
Cavity Car- tridge Fuse Mini- Fuse Description 2 0——— 2 1——— 2 2——— Rear Power Distribution Center There is also a power distribution center located in the trunk under the spar e tire access panel. This center contains fuses and relays.
CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure.
Cavity Car- tridge Fuse Mini- Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Integrated Power Mod- ule (IPM) 3 ——— 4 40 Amp Green — Integrated Power Mod- ule .
Cavity Car- tridge Fuse Mini- Fuse Description 1 6——— 17 — 20 Amp Y ellow Cluster 18 — 20 Amp Y ellow Selectable Power Outlet 19 — 10 Amp Red Stop Lights 2 0——— 2 1——— 2 2—.
Cavity Car- tridge Fuse Mini- Fuse Description 35 — 5 Amp Orange Antenna Module - if equipped/Power Mir- rors 36 — 25 Amp Clear Hands-Free Phone - if equipped//Radio 37 — 15 Amp Blue T ransmissi.
window switch, and the passenger power window switch are fused by the 25 Amp circuit br eaker in cavity 13. If you experience temporary or permanent loss of these systems, see your authorized dealer for service. VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days, you may want to take these steps to protect your battery .
LIGHT BULBS — Exterior Bulb Number Low Beam Headlight – High Intensity Discharge (HID) ................ D 1 S (Serviced at Authorized Dealer) High Beam Headlight ..................... 9005 Front Park/T urn Light ................... 3157A Front Fog Light .
W ARNING! A transient high tension occurs at the bulb sockets of HID headlights when the headlight switch is turned ON. It may cause serious electrical shock or electro- cution if not serviced properly .
3. Remove the fasteners from the back of the tail light assembly . 4. Pull back the trunk liner . 5. Remove the remaining fasteners fr om the back of the tail light assembly .
6. Pull the tail light assembly clear from the vehicle to access the bulbs. 7. Push the electrical connector locking tab to the side. 8. Disconnect the electrical connector . 9. T urn the appropriate bulb and socket assembly coun- terclockwise to r emove it from the tail light assembly .
13. Reinstall tail light retainer . 14. Close the trunk. Center T ail/Backup Light See your authorized dealer for bulb replacement. Center High-Mounted Stop Light (CHMSL) The CHMSL uses LED lights that are not serviceable separately . The CHMSL must be r eplaced as an assembly , see your authorized dealer .
3. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 4. Reinstall the bulb and socket assembly . 5. Reattach the light to the rear fascia, and then install the screws.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 19 Gallons 72 Liters Engine Oil with Filter 6.1 Liter Engine (SAE 0W -40) 7 Quarts 6.6 Liters Cooling System * 6.1 Liter Engine (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula) 15 Quarts 14.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) Engine Oil (6.
Chassis Component Fluids, Lubricant, or Genuine Part Manual T ransmission MOP AR 威 A TF+4 Automatic T ransmission Fluid Automatic T ransmission MOP AR 威 A TF+4 Automatic T ransmission Fluid Brake Master Cylinder MOP AR 威 DOT 3, SAE J1703 should be used.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ..... 3 8 6 䡵 Maintenance Schedule ................. 3 8 6 ▫ Required Maintenance Intervals .
EMISSION CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emission Contr ol System.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the requir ed maintenance intervals.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.
48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the air conditioning filter . ❏ Inspect the brake linings, and replace if necessary .
72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the air conditioning filter . ❏ Inspect the brake linings, and replace if necessary .
132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary .
* This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 0 5 ▫ Prepar e For The Appointment .......... 4 0 5 ▫ Prepar e A List ..................... 4 0 5 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 1 1 ▫ T readwear ........................ 4 1 2 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
high quality service. The manufacturer’s authorized deal- ers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer’s service manager first.
Chrysler LLC Customer Center P .O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: (800) 992-1997 Chrysler Canada Inc. Customer Center P .O. Box 1621 W indsor , Ontario N9A 4H6 Phone: (800) 465–2001 In Mexico Contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.
Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after the manufactur er’s New V ehicle Limited W arranty expires. The manufacturer stands be- hind only the manufacturer’s Service Contracts.
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Street, SW ., W ashing- ton, D.C. 20590.
• Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -controlled ve- hicle systems and features.
T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under contr olled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
.
INDEX 10.
About Y our Brakes .................... 270,272 ABS (Anti-Lock Brake System) ............ 273,276 Adding Engine Coolant (Antifreeze) .......... 3 5 5 Adding Fuel ........................... 3 1 3 Adding W asher Fluid ..................... 3 4 9 Additives, Fuel .
Automatic Door Locks ................... 29,30 Automatic Headlights .................... 1 2 0 Automatic T ransaxle Special Additives ...................... 3 6 1 Automatic T ransmission ............. 259,360,361 Adding Fluid ...................... 361,383 Autostick .
Brake/T ransmission Interlock ............... 2 5 8 Break-In Recommendations, New V ehicle ........ 6 5 Brightness, Interior Lights .................. 1 2 5 Bulb Replacement ..................... 374,375 Bulbs, Light .......................... 69,374 Calibration, Compass .
Computer , T rip/T ravel .................... 1 7 0 Connector U C I ................................ 2 1 7 Universal Consumer Interface (UCI) ......... 2 1 7 Console .............................. 1 4 6 Console, Floor .......................... 1 4 6 Console, Overhead .
Dipsticks Oil (Engine) .......................... 3 4 2 Power Steering ........................ 2 6 9 Disabled V ehicle T owing ................... 3 3 1 Disposal Antifreeze (Engine Coolant) ............... 3 5 6 Engine Oil ...........................
Coolant (Antifreeze) ................. 353,382 Cooling ............................. 3 5 3 Exhaust Gas Caution .................. 67,312 Fails to Start .......................... 2 4 9 Flooded, Starting ...................... 2 4 9 Fuel Requirements .
Fluid, Brake ........................... 3 8 3 Fluid Capacities ......................... 3 8 1 Fluid Leaks ............................. 6 9 Fluid Level Checks Automatic T ransmission ................. 3 6 0 Brake .............................. 3 5 8 Cooling System .
Gauges Coolant T emperature ................... 1 5 6 Fuel ............................... 1 5 5 Speedometer ......................... 1 5 5 T achometer .......................... 1 5 5 General Information ............ 17,25,107,264,308 General Maintenance .
HomeLink 威 (Garage Door Opener) T ransmitter . . . 133 Hood Release .......................... 1 1 8 Ignition ............................... 1 3 K e y ............................... 12,13 Ignition Key Removal ..................... 1 3 Illuminated Entry .
Leaks, Fluid ............................ 6 9 Life of T ires ............................ 2 9 9 Light Bulbs .......................... 69,374 Lights .............................. 69,120 Airbag ........................ 50,54,68,158 Alarm .............
Oil Pressur e .......................... 1 5 9 Parade Mode (Daytime Brightness) ......... 1 2 5 Passing ............................. 1 2 4 Reading .......................... 124,133 Seat Belt Reminder ..................... 1 5 9 Security Alarm (Theft Alarm) .
Manual T ransmission ............... 251,359,362 Fluid Level Check ................... 359,362 Shift Speeds .......................... 2 5 3 Map/Reading Lights .................. 124,133 Master Cylinder (Brakes) .................. 3 5 8 Methanol .....
Recommendation ................... 343,381 V iscosity ......................... 343,381 Oil Filter , Change ........................ 3 4 4 Oil Filter , Selection ....................... 3 4 5 Onboard Diagnostic System .............. 339,340 Opener , Garage Door (HomeLink 威 ) .
Programmable Electr onic Features ............ 1 7 8 Programming T ransmitters (Remote Keyless Entry) .................... 2 0 Radial Ply T ires ......................... 2 9 7 Radiator Cap (Coolant Pressur e Cap) .......... 3 5 5 Radio Operation ....
Safety Checks Inside V ehicle ................. 6 8 Safety Checks Outside V ehicle ............... 6 9 Safety Defects, Reporting .................. 4 0 9 Safety , Exhaust Gas ....................... 6 7 Safety Information, T ire ................... 2 8 5 Safety T ips .
Service Assistance ....................... 4 0 5 Service Contract ......................... 4 0 8 Service Engine Soon Light (Malfunction Indicator) .................... 1 6 4 Service Manuals ........................ 4 1 0 Setting the Clock ...........
Column Lock ......................... 1 2 8 Power ........................... 268,269 T ilt Column .......................... 1 2 8 Wheel, T ilt ........................... 1 2 8 Steering Wheel Mounted Sound System Controls ...........................
Pressur e Monitor System (TPMS) ........... 3 0 3 Pressur e W arning Light .................. 1 6 2 Quality Grading ....................... 4 1 1 Radial .............................. 2 9 7 Replacement ......................... 2 9 9 Rotation ........
T urn Signals ......................... 123,157 UCI Connector ......................... 2 1 7 uconnect 威 (Hands-Free Phone) ............... 7 9 Uniform T ire Quality Grades ................ 4 1 1 Universal Consumer Interface (UCI) Connector . . . 217 Universal T ransmitter .
W indshield Defroster ................ 68,232,233 W indshield W ashers ................ 125,127,349 Fluid ............................... 3 4 9 W indshield W iper Blades .................. 3 4 9 W indshield W ipers ....................... 1 2 5 W iper Blade Replacement .
INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/AL TERATIONS THINGS TO KNOW BEFORE STAR TING YOUR VEHICLE A WORD ABOUT YOUR KE.
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel.
2009 CHALL ENGER SR T8 CHAL LENGER SR T8 Chrysler LL C 81-226-0914 Second Edition Printed in U.S.A. OWNER ’S MANUAL 2009.
Een belangrijk punt na aankoop van elk apparaat Dodge 2009 Challenger SRT8 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dodge 2009 Challenger SRT8 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dodge 2009 Challenger SRT8 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dodge 2009 Challenger SRT8 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dodge 2009 Challenger SRT8 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dodge 2009 Challenger SRT8 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dodge 2009 Challenger SRT8 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dodge 2009 Challenger SRT8 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
