Gebruiksaanwijzing /service van het product Plaza HD-T2 van de fabrikant Dolby Laboratories
Ga naar pagina of 42
Us er Guide Freeview HD Receiver with Apps Plaza HD T2.
2 WEL COME Thanks for buying this Manhattan Plaza HD•T2 Freeview receiver, designed to provide you with the best in digital TV, radio and apps. Connect to a suitable HD-ready television using HDMI for breathtaking high definition digital pictures and digital sound.
3 CONTENT S In T he Box 5 Your receiver 6 Remote control 8 Pr epar a tion 10 The aerial 10 Connecting your receiver 10 Switching on 11 Tuning in 12 Ev eryday U se 14 Turning on the receiver 14 Changin.
4 1 CONTENT S Adv anced Use (con tinued) Time menu section 28 - Auto standby 28 - Sleep timer 28 - Auto turn on 28 - Auto turn off 28 System menu section 29 - Retune 29 - Manual scan 29 - Network con.
5 In T he Box In your Plaza HD•T2 Freeview receiver pack you should fi nd the following items: 1 def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz ab.
6 YOUR RECEIVER Manhattan Plaza HD•T2 Front CHANNEL CHANGE UP/DOWN Change channels up and down STANDBY Switch the receiver on and off POWER INDICATOR LIGHT (red for standby, blue for on).
7 Manhattan Plaza HD•T2 Rear ANTENNA IN Input for connection to your aerial ETHERNET Network socket for connection to your router & the internet SCART Output for connection to a non-HD televisio.
8 REMOTE CONTROL Plaza HD•T2 def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc def ghi jkl mno tuv pqrs wxyz abc 2nd Generation Remote Con trol Ma.
9 OK Selects the option in a menu. LIST Displays the channel list. GUIDE Displays the programme guide. BACK Exits a menu and returns to the main menu. EXIT Exits a menu and returns to normal TV viewing. Opens YouTube APPS Open Apps menu. V Turns the volume up.
10 Pr epar a tion This section explains how to set up your Plaza HD•T2 to receive Freeview channels. To receive Freeview, you must connect your Plaza HD•T2 receiver to an appropriate TV aerial that has been correctly installed. If your aerial is unable to provide adequate signal, it may need to be realigned.
11 Ensure your television is turned off and connect the HDMI cable supplied between the HDMI socket at the back of your Plaza HD•T2 receiver and an HDMI socket on your television. There may be more than one HDMI socket on your television. If you are not sure which to use, check the television’s manual.
12 Switch on the mains socket the Plaza HD•T2 is connected to. After a few seconds, the receiver’s first Freeview installation screen shown below will appear on the television screen: TUNING IN W.
13 Your Plaza HD•T2 receiver will scan for channels, displaying the total number of TV, radio and data channels found. When the scan is complete, press OK to proceed to the next step. To use the receiver’s parental guidance function, locked channels or restore to factory default, you need to create a PIN.
14 Ev eryday U se This section describes the day-to-day use of your Plaza HD•T2 receiver – how to select the channels that you want to watch, view the programme schedules, and control the basic features.
15 There are other ways to change channel: • Use the browsing bar at the bottom of the screen (see below) • Use the on-screen channel list (see page 17) • Use the programme guide (see page 18) CHANGING THE VOLUME You can increase or decrease the volume by using the V and V buttons on the remote control.
16 While the bar is displayed, press the button to see details of the next programme, and the button to go back again. To see what is on another channel, press the or buttons. To change to this channel, press OK while the bar is still displayed. To remove the bar from the screen at anytime, press EXIT .
17 USING THE CHANNEL LIST Display the on-screen channel list by pressing the LIST button on the remote control. This lists the channels on the left-hand side of the screen, in number order, and displays a preview window of the currently selected channel on the right-hand side of the screen.
18 USING THE PROGRAMME GUIDE The Plaza HD•T2 guide is used to display details of all programmes on in the week ahead and to open Apps such as BBC iPlayer or YouTube. Open the guide selection screen by pressing the GUIDE button on the remote control.
19 You look through the scheduled programmes using the and buttons to move through the channels and the and buttons to highlight programmes showing at different times. As you move the highlight bar through the schedule, the programme summary shown above the list changes to refl ect the programme highlighted.
20 INTERACTIVE TV SERVICES Several Freeview channels broadcast a range of digital text and interactive services, such as news, weather, games, sports information and video, alongside normal TV. If interactive services are available, they will be indicated by an on-screen prompt – usually a red button in the top right-hand corner of the screen.
21 USING THE FAVOURITES LISTS The favourites lists make it easier for you to choose the channel that you want to watch, by limiting the on-screen list to just a few channels, such as those of a particular type, or that one member of the family watches the most.
22 In the channel list, favourites lists can be selected in the same way as the Freeview TV, radio and data channel lists, by pressing the or buttons. Press OK to view a selected channel, to change the favourites lists it is assigned to, or PIN lock it by pressing the yellow button.
23 If you have set up your receiver for a 16:9 Widescreen TV, the options are: • Auto - the broadcaster chooses the best display format. • Widescreen - a 4:3 broadcast is stretched to fill the 16:9 screen. • Pillarbox – a 4:3 broadcast is shown unaltered with black bars on each side.
24 If you want to alter the channel list, first press the LIST button to display the channel list screen. To remove a channel, highlight it and press the red button to delete the channel. You need to confirm your choice to ensure you don’t delete a channel accidentally.
25 INFORMATION Press OK to show technical information about your receiver, including the Helpline phone number, signal strength and quality readings. PICTURE MENU SECTION Highlight the option you want to alter using the and buttons. When you have finished making the changes you want, leave the menu system by pressing BACK or EXIT .
26 SCREEN TYPE Press OK to show the screen type menu and use the and buttons to choose between 16:9 Widescreen and 4:3 Traditional. Press OK to confirm your choice.
27 SOUND MENU SECTION Highlight the option you want to alter using the and buttons. When you have fi nished making the changes you want, leave the menu system by pressing BACK or EXIT . AUDIO LANGUAGE The Freeview channels can broadcast in a number of languages.
28 SOUND MENU SECTION (continued) LIP-SYNC DELAY If you are using the S/PDIF output with a sound system and find the sound and picture falling out of sync, you can delay the sound output by a small amount to compensate.
29 AUTO TURN ON You can set the Plaza HD•T2 to switch on automatically at a particular time. Press OK to show the auto turn on menu and use the or buttons to set the timer to turn the receiver on once, every day, each week, on weekdays, weekends, or particular days of the week.
30 SYSTEM MENU SECTION (continued) Press OK to display the Manual Scan menu. Enter the UHF channel (21 - 68), frequency (474Mhz - 850Mhz) and bandwidth (7MHz or 8MHz) to be scanned. You can use the number buttons (0-9) to enter the channel and frequency, or use and to enter the channel, frequency and bandwidth.
31 SOFTWARE UPDATE VIA OAD Press OK to turn on or off the automatic software update. OAD SOFTWARE MANUAL SCAN Press OK to immediately search for new software to download. SOFTWARE UPDATE VIA USB Press OK to load new software for the receiver from a storage device connected to the USB socket on the back of the receiver.
32 AUTOMATIC (DHCP) Ensure the ETHERNET socket at the back of the Plaza HD•T2 is connected to your router or hub. See the Connecting your receiver section (page 10) for more information. You can check that the receiver has successfully connected to the Internet from the information menu.
33 MANUAL (STATIC) If your broadband modem/router is not compatible with DHCP (Dynamic Host Confi guration Protocol), or you wish to manually confi gure the Network Confi guration and IP address, press OK to select the Network Confi guration option.
34 A ppendix A – Saf et y POWER Your receiver requires a 100V to 240V AC ~ 50Hz mains supply and is fitted with a moulded plug. The mains plug is used as the disconnect device and shall remain readily operable. The USB port maximum load is 500mA under normal operation.
35 ELECTRICAL SAFETY Your receiver requires a 100V to 240V AC ~ 50/60Hz mains supply and is fitted with a moulded plug. If the plug breaks or becomes damaged do not use it. If you change the fuse in the plug ensure you refit the fuse cover. If the plug requires replacement please follow these instructions.
36 PROBLEM POSSIBLE CAUSE WHAT TO DO Power light off Power supply cable disconnected. Check the power supply cable. No set up screen Receiver not switched on. Check the mains power cable is plugged in and mains socket is turned on. Turn on receiver. HDMI/SCART cable disconnected.
37 PROBLEM POSSIBLE CAUSE WHAT TO DO No picture or sound HDMI/SCART cable disconnected. Check HDMI/SCART cable connections at receiver and television. Television not switched to HDMI/SCART input.
38 PROBLEM POSSIBLE CAUSE WHAT TO DO TV picture not HD Tuned to an SD channel. Tune to an HD channel. TV not capable of HD. Connect the receiver to an HD-Ready TV. TV connected by SCART. Connect the TV with the HDMI lead. No response with remote control Receiver in standby.
39 PROBLEM POSSIBLE CAUSE WHAT TO DO TV picture not HD Tuned to an SD channel. Tune to an HD channel. TV not capable of HD. Connect the receiver to an HD-Ready TV. TV connected by SCART. Connect the TV with the HDMI lead. No response with remote control Receiver in standby.
40 GUARANTEE The product is guaranteed for 12 months from the date of original purchase. If there’s any defect due to faulty materials or workmanship, please contact us and have your receipt of purchase available for reference.
41 What we do exclude: Except as set out in the preceding paragraph, we exclude all liability for any losses, whether in contract or tort, for any direct, indirect, incidental, special or consequentia.
v2 For assistance, please call the Manhattan helpline on 020 8450 0005 or visit our website at www.manhattan-tv.com v3.
Een belangrijk punt na aankoop van elk apparaat Dolby Laboratories Plaza HD-T2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dolby Laboratories Plaza HD-T2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dolby Laboratories Plaza HD-T2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dolby Laboratories Plaza HD-T2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dolby Laboratories Plaza HD-T2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dolby Laboratories Plaza HD-T2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dolby Laboratories Plaza HD-T2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dolby Laboratories Plaza HD-T2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
