Gebruiksaanwijzing /service van het product XR-EM50 van de fabrikant Aiwa
Ga naar pagina of 20
U XR-EM50 8C-CL5-903-01 011220ASW -H-BF For assistance and information (United States and Puerto Rico) En (English) E (Español) F (Français) MODE D'EMPLOI MANUAL DE INSTRUCCIONES OPERA TING INS.
2 En W ARNING T o reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 En Outdoor Antenna Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
4 En Remote control Detach the battery compartment lid at the rear of the remote control and insert two R6 (size AA) batteries with correct polarity . R6(AA) • Replace the batteries with new ones when the operational distance between the remote control and main unit becomes shorter .
5 En P ARTS AND CONTROLS Main unit: front 1 4 2 3 6 7 5 1 d T APE (REC MUTE) Starts playback and changes the playback side. Also used to enter 4-second blank spaces during recording. TUNER/BAND Selects Radio function and the radio band. AU X Selects the function of external equipment connected to AUX IN jacks.
6 En Remote control 1 4 7 5 6 9 8 ! 0 2 3 Buttons with the same or similar names on the main unit basically have the same function. 1 PO WER 2 0–10, +10 CD: selects a track of the specified number . Radio: tunes in the station with the specified preset number .
7 En ADJUSTMENTS BEFORE OPERA TION ECO CLOCK DISPLA Y SET SHIFT f , g s POWER 6 ST ANDBY/ON T APE, TUNER/BAND , A UX, CD CD , TUNER/BAND , T APE, A UX, s DISPLA Y T ONE f , g ECO mode Reduces power consumption in standby mode with the following operations.
8 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playing a CD 1 Press z CD OPEN/CLOSE to open the disc compartment. Place a disc with the label side up. Then close the disc compartment by pressing z CD OPEN/CLOSE. • When loading an 8-cm disc, place it on the inner circle of the tray .
9 En Programmed play Plays back up to 30 selected tracks in programmed order . 1 Hold down SHIFT and press PROGRAM on the remote control in stop mode. " PRGM " flashes on the display . 2 Press the numbered buttons on the remote control to program a track.
10 En RADIO OPERA TIONS Manual tuning 1 Press TUNER/BAND repeatedly to select a band. The unit switches to the radio from any other function and alternates between FM and AM. 2 Press f or g repeatedly to tune in a station. " TUNE " is displayed when a station is tuned in.
11 En SOUND ADJUSTMENTS V olume T urn VOLUME (press VOLUME + , - on the remote control). Adjust from 0 (minimum) to 30 and MAX (maximum). Tip : Volume level setting is retained during power -off standby . If the unit is turned off with the volume set to 17 or higher , it is automatically turned down to 16 the next time the unit is turned on.
12 En T APE PLA YBACK Playback Use only type I (normal) tapes. 1 Press z PUSH EJECT to open the cassette holder . 2 Insert the tape. Insert with the exposed side down, and press z PUSH EJECT to close the cassette holder . 3 Press d to start play . T o select a reverse mode Hold down SHIFT and press REV MODE repeatedly on the remote control.
13 En T o start CD recording more easily Insert the tape to be recorded, load the disc, and press SYNCHRO REC. Regardless of the function currently selected, CD play and tape recording start simultaneously . • In CD stop mode, tape recording starts from the beginning of the disc (all tracks recording).
14 En 4 Press the numbered buttons on the remote control to enter the length of the recording tape. 10 to 99 minutes can be specified. - For a 60-minute tape press 6 and 0. In a few seconds, the unit determines the tracks to be recorded for each side.
15 En Side A T ab for side A 6 Repeat step 5 to select the rest of the tracks for side A. The remaining recording time of side A is displayed. Y ou cannot select a track with a longer playing time. 7 Hold down SHIFT and press CD EDIT/CHECK on the remote control to switch to side B and select the tracks for the side.
16 En TIMER OPERA TIONS Sleep timer T urns off the unit automatically after a specified time. 1 Hold down SHIFT and press SLEEP on the remote control. " SLEEP " is displayed. 2 Within 6 seconds, press f or g repeatedly to set the sleep timer duration.
17 En T imer recording Timer recording is available only for TUNER and AUX (with an external timer) sources. 1 Hold down SHIFT and press TIMER on the remote control repeatedly so that " 5 REC " is displayed. 2 Within 6 seconds, press SET . 3 Press f or g to set the timer -on time, and press SET .
18 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. T o clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
19 En Specifications MAIN UNIT CX-LEM50 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminal 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (10 .
Printed in China NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Een belangrijk punt na aankoop van elk apparaat Aiwa XR-EM50 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Aiwa XR-EM50 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Aiwa XR-EM50 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Aiwa XR-EM50 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Aiwa XR-EM50 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Aiwa XR-EM50 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Aiwa XR-EM50 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Aiwa XR-EM50 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
