Gebruiksaanwijzing /service van het product M170 van de fabrikant 3M
Ga naar pagina of 33
M170 Flat Panel Display T ouch Monitor User Guide 3M Touch Systems Read and understand all safety information contained in this document before using this product.
2 M170 FPD Monitor Installation Guide The information in this document is subject to change without notice. No part of th is document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 3M Touch Systems.
Content s Overview Important Safety Information .................................................................................... 5 Intended Use .......................................................................................................
4 M170 FPD Monitor Installation Guide Lock Out Feature .............................................................................................. 28 Chapter 4 Maintenance and Troubleshooting Maintaining Your Touch Monitor .........................
Overview Welcome to the world of 3M Touch Systems — a world where using a computer is as simple as touching the screen. This guide describes how to set up your M170 Flat Panel Display (FPD) touch monitor. This document assumes you have basic computer skills.
6 M170 FPD Monitor Installation Guide CAUTION To avoid the risk of electric shock which may resul t in minor or moderate injury: • The socket-outlet should be installed near the equipment and should be easily accessible. • Use a power cable that is properly grounded.
Overview 7 • Do not expose this display t o heat. Passive heat may cause damage t o the case and other parts. • Do not install this display in areas wh ere extrem e vibrations m ay be generated. For example, nearby manufacturi ng equipment may produce strong vibrations.
8 M170 FPD Monitor Installation Guide • Operating system used • Information on addi tional peripherals Technical Support is available Monday through Friday 8 a.m. to 8 p.m. US Eastern Standard Time – 9 a.m. to 5 p.m . throughout Europe. Limited call back service Saturdays and Sundays.
CHAPTER 1 Introduction to Flat Panel Displays The 3M Touch Systems product line of Flat Pa nel Display (FPD) touch monitors offers the M170 monitor for desktop and countertop applications with built-in multim edia options.
10 M170 FPD Monitor Installation Guide Capacitive and Resistive Options The monitor is available with 3M Touch System’s ClearTek® capacitive touch screen. Capacitive is the touch screen of choice for public access applications requiring high levels of durability and reliable performance 24 hours a day, 7 days a week.
CHAPTER 2 Setting Up Y our M170 FPD Monitor This chapter describes how to set up and integrate your 3M Touch Systems M170 FPD monitor into a touch application.
12 M170 FPD Monitor Installation Guide Unpacking Your Touch Monitor Carefully unpack the carton and inspect the contents. Your M170 monitor comes with most of these cables already connected.
Chapter 2 Setting Up Your M170 FPD Monitor 13 Figure 2. Removing the Base Cover Base Cover Tabs 65-2220 1. Make sure the monitor is in its full up right position. 2. Push in and lift up on each of the two tabs lo cated on the left and ri ght sides of the base cover.
14 M170 FPD Monitor Installation Guide Figure 4. Removing the Cable Connector Cover 65-2218 Keep tabs against LCD 5. Lift this cover slightly so that th e tabs are up against the rear o f the LCD to keep them from catching on the cab les below. Tilt the cover do wn as you slide the cov er out from behind the support rods.
Chapter 2 Setting Up Your M170 FPD Monitor 15 Figure 6. Disassembling the LCD from Its Base for Arm Mounting Step 1 – Unlock front mechanism and disconnect all cables from the LCD. Step 2 -- With the unit laying face down safely and securely on a nonabrasive surface, remove the two screws connecting the name plate and support rods to the LCD.
16 M170 FPD Monitor Installation Guide Countertop Base Mounting Option Keyhole slots in the bottom of the base plate en able you to secure the unit to a desktop or countertop. Use standard screws in the deskt op or countertop and then slide the base plate on for a secure fit.
Chapter 2 Setting Up Your M170 FPD Monitor 17 Figure 8. Adjusting the Viewing Angle Lift up latch to release lock and raise or lower display to suit y our needs. Push down latch to engage lock and stabilize display position. Lift up on the latch to release lock.
18 M170 FPD Monitor Installation Guide Table 1. Applicable Display Mode and Refresh Rate Display Mode Refresh Rate DOS 720 x 400 at 70Hz VGA 640 x 480 at 60Hz 640 x 480 at 72Hz 640 x 480 at 75Hz SVGA .
Chapter 2 Setting Up Your M170 FPD Monitor 19 Multimedia Features The M170 FPD monitor comes with speakers built into the display bezel. The multimedia cable can be connected to the rear of the monitor for input.
20 M170 FPD Monitor Installation Guide Table 2. Supported Mag Stripe Card Readers ID Tech® MagTek® all MiniMag™ readers all "mini" sized readers IDT 3331-02U IDT 3321-33 2180201 IDT 3331.
Chapter 2 Setting Up Your M170 FPD Monitor 21 4. Plug the AC/DC power suppl y into the M170 FPD. Be sure to use the power supply incl uded with the monitor. WARNING To avoid the risk of electric shock which coul d result in serious injury or death: • This device must be operat ed with the original power supply, part num ber: HJC, HASU05F.
22 M170 FPD Monitor Installation Guide Testing the M170 FPD Note: The M170 FPD has a power status LED located on the front of the bezel. After connection, turn on the power switch located on the front bezel. Before you test your touch monitor, make sure all cables are connected properly and routed through the cable management system.
Chapter 2 Setting Up Your M170 FPD Monitor 23 Calibrating the Touch Screen After you connect your touch monitor and install TouchWare™ software, you must calibrate the touch screen.
.
CHAPTER 3 V ideo Display Options This chapter provides guidelines for adjusti ng the video display and using the monitor controls to adjust the image to your liking. Before you make any adjustments: • Be sure to adjust the control s in your normal lighti ng conditions.
26 M170 FPD Monitor Installation Guide If you do not press the Menu, Select, or ◄ /left or ► /right adjust buttons for 45 seconds, the monitor adjustment program times out and hides the menu options. You can press the Menu button at any time to display the options again.
Chapter 3 Video Display Options 27 AUTO CONFIG If you change your display to Windows shut down mode, this adjustm ent will work better. Click on t he "Start" button at the bottom right side, and then click Shut Down. This will bring you to the Windows shutdown mode.
28 M170 FPD Monitor Installation Guide Icon Description OSD BLENDING: To adjust the brightness of the OSD MENU. LANGUAGE Selects a language am ong English, German, French, Spanish, Italian, Si mplified Chinese or Traditional Chinese.
CHAPTER 4 Maintenance and T roubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling 3M Touch Systems, try the suggested actions that are appropriate to the problems you are experiencing with the monitor.
30 M170 FPD Monitor Installation Guide • Apply the cleaner with a soft, lint-free clo th. Avoid using g ritty cloths. • Always dampen the cloth and then clean the scr een. Be sure t o spray the cleaning liquid onto the cloth, not the screen, so that drips do not seep inside the display or stain the bezel.
Chapter 4 Maintenance and Troubleshooting 31 Troubleshooting the Touch Screen If you are experiencing problems with the touch screen, check the following list of common installation errors.
32 M170 FPD Monitor Installation Guide This equipment has been tested and found to comply within limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfe rence in residential installations.
Rear Edge of Base Not Shown F ront Edge of Base Drill 4 Mounting Holes 0.178" (4.5 mm) Dia. Locking Mechanism Receptacle 0.21" (5.5 mm) 5.71" (145 mm) 3.74" (95 mm) 0.39" (10 mm) 0.70" (17.8 mm) Place this template on mounting surface and drill four holes as shown f or mounting screws.
Een belangrijk punt na aankoop van elk apparaat 3M M170 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen 3M M170 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens 3M M170 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding 3M M170 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over 3M M170 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van 3M M170 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de 3M M170 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met 3M M170 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
