Gebruiksaanwijzing /service van het product HP-5103K van de fabrikant Edimax
Ga naar pagina of 30
HP - 5103 User Manual 03- 201 4 / v1.0.
1 COPYRIGHT Copyright Edim ax Technology Co., Ltd. al l rights reserved. No part of this publication may be reprodu ced, transmitted, transc ribed, stored in a retrieval system, or translated in t.
2 Contents Chapter 1: Introduction ..................................................................................................................................... 3 1.1 Product Features ...........................................................
3 Chapter 1 : In troduction 1.1 Product Featur es Easy plug-n-play setu p and 12 8-bit AES security Max. powerline spe ed up to 500Mbp s Backward compatib le with 20 0Mbps powerline adapte.
4 1.3 Compatibility AV 500 p owerline devices (HomeP lug AV standard) are incompatible an d cannot be used with 14 Mbps and 85Mb ps powerline devices ( HomePlug 1.0 an d 1.1 standards ). 1.4 System Requir ements Operating System Utility supports Wind ows XP/Vista /7/8 CPU Intel P entium III 1.
5 Chapter 2 : In terfaces 2.1 LEDs LED Status Description LAN Green LAN port connecte d Blinking LAN activity (transf erring data) Off LAN port not conn ected PLC Green/Red The green indicator turns on and the red indicator turns bli nks slowly when the devic e is detecting a powe rline link.
6 2.2 Button Interface Description Ethernet Port This is a Fast Ether net port for connecting to a computer or othe r devices with a networ k port. Group/Reset Creates an encrypt ed powerline network group automatically (press the button for less tha n 3 seconds).
7 Chapter 3:Utility Software Installa tion 3.1 Win 8 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer.
8 Step 4 Click right button on WinPCap 4.1.2 then click “ Properties ” . Step 5 Click Comp atibility tab and check “ Run this program in compatibility mode for:", then selec t Windows 7, then c lick “ Apply ” . Step 6 Then click “ WinPc ap_4_1_2 ” .
9 Step 7 When the following WinPcap Compatibility Assistan t appears, selec t Run the program without ge tting help..
10 Step 8 After the installation is comp lete, click “ Finish ” ..
11 Step 9 Click th e “ Edimax PowerLine Utilit y ” , the “ PLC 50 0Mbps Utility ” appears, c lick “ Next ” to continue..
12 Step 10 Select where you want to install the utility software, and then click “ Next ” . Step 11 After the installation is complete, click “ Close ” .
13 Step 12 An icon will ap pear on your d esktop. Click the icon to open the utility software. Note: You can manage all t he connecte d powerline adapte rs with th e utility software.
14 3.2 Win XP/Vista / 7 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive.
15 Step 4 If you have not installed Win Pcap version 4.1.2 ( or higher) on your compute r before. The wizard will guide you through the setup process..
16.
17 Step 5 When th e “ Edimax PowerLine Utility ” setup wizard appears, click “ Next ” to continue. Step 6 In the “ Lic ense Agreement ” scree n, please select “ I Agree ” and then click “ Next ” to continue.
18 Step 7 Select where you want to install the utility software, and then click “ Next ” . Step 8 If you confirm to install the utility, click “ Next ” .
19 Step 9 After the installation is comp lete, click “ Close ” . Step 10 An icon will ap pear on your d esktop. Click the icon to open the utility software. Note: You can manage all th e connected powerline adapters with the utility software. However, i nstalling th e utility software i s optional.
20 Chapter 4 : Using the Utility Softw are 4.1 Main Tab The “ Main ” tab provides a list of p owerline adap ters connected to the net work. The upper p anel displays local powerline adapters . Th e lower pan el displays remote powerline adapters in the network.
21 4. 2 Diagnostics Tab The “ Diagnostics ” tab displays the system information and history of all rem ote devices. The upper p anel displays techn ical data concern ing the software and hardware on th e host compute r and t he lower panel displays th e history of all re mote devic es.
22 4. 3 About Tab The “ About ” tab contains some b asic information ab out the software. You can also enable or d isable the autoscan fun ction under “ Pr eferences ” .
23 Chapter 5 : Grou p Button This section dem onstrates how to add or remove d evices from a HomeP lug AV n etwork with the “ Group ” button. 5.1 Forming a Hom ePlug AV Logical N etwork When two d.
24 5.2 Joining a Netw ork If you want to add a new powerline device to an existing network , follow th e following procedures: Step 1 Press the “ Group ” b utton on an adapter in th e existing net work (adapter A or B) for less than 3 seconds. The Power LED will st art to blink.
25 5.3 Leaving a Netw ork & Joining an other Network If you want to remove a p owerline device from an existing network and ad d it to another net work, follow the following procedu res: Step 1 Press the “ Group ” b utton on the adapte r to be removed (adapter B) for at least 10 seconds.
26 Chapter 6: Trou bleshooting If your powerline ada pters have difficu lty communicatin g with each other, try the following proc edures: Try power cyc ling the u nit by unplugging it from the electric outlet for 10 seconds an d plugging it in again.
27 Federal Communic ation Commissi on Interfere nce Statement This equipment has b een tested and f ound to comply with the limits f or a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These li mits are designed to provide re asonable pr otection against harmful interferenc e in a residential installation.
28 EU Declaration of Confor mity English: This equipment is in comp liance with the essential r equirements and other relevant pr ovisions of Directive 2004/108/EC, 2 009/125/EC.
29.
Een belangrijk punt na aankoop van elk apparaat Edimax HP-5103K (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Edimax HP-5103K heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Edimax HP-5103K vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Edimax HP-5103K leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Edimax HP-5103K krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Edimax HP-5103K bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Edimax HP-5103K kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Edimax HP-5103K . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
