Gebruiksaanwijzing /service van het product G11 van de fabrikant Eizo
Ga naar pagina of 43
User’ s Manual Monochrome LCD Monitor.
English 2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
English T ABLE OF CONTENTS 3 T ABLE OF CONTENTS PRECA UTIONS .................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically f or use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product ma y not perform as stated in the specifications.
English PRECA UTIONS 5 W ARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer f or advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS W ARNING Use the enclosed po wer cord and co nnect to the standar d power outlet of y our country . Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. T o disconnect the power cord, grasp the plug firmly and pull.
English PRECA UTIONS 7 W ARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly .
English 8 PRECA UTIONS CA UTION Unplug the unit before c leaning it. Cleaning the unit while it is plugged in to a power outlet may result in electric shock. If you plan to lea ve the unit unused for an e xtended period, disconnect the power cor d from the wall socket after turning off the po wer switch for the saf ety and the power conservation.
English 1. INTRODUCTION 9 1. INTR ODUCTION Thank you very much for choosing an EIZO Monochrome Monitor . 1-1. Features • DVI (p. 41) Digital input (TMDS (p.
English 10 1. INTRODUCTION 1-3. Controls & Connector s Front ENTER AUT O SIGNAL 1 - 2 (4) (2) (5) (6) (3) (7) (8) (1) (1) ScreenManager (2) Main P ower Switch (3) SIGNAL 1-2 Signal selection b.
English 1. INTRODUCTION 11 Rear (9) (11) (10) (12) (13) (14) (15) (16) (9) Height Adjustable Stand (Detachab le) *4 (10) Security Lock Slot *5 (11) SENSOR Serial P or t, Photo Sensor Connector (Mini D.
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the power s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
English 14 2. CABLE CONNECTION [Signal selection] Please use the signal select button on the front panel. (1) The selection menu appears b y pressing the button f or more than 2 seconds.
English 2. CABLE CONNECTION 15 4. Plug the other end of the power cord into a power outlet. W ARNING Use the enclosed po wer cord and connect to the standard power outlet of y our countr y . Be sure to remain within the rated voltage of the power cord.
English 16 3. ScreenManager 3. ScreenManag er 3-1. How to use the ScreenManager ENTER AUT O SIGNAL 1 - 2 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager . [Main Menu ] 2. Making Adjustments and Settings (1) Select the desired sub menu icon using the Control buttons and push the Enter button.
English 3. ScreenManager 17 3-2. ScreenManager Adjustments and Settings. The following table shows all the Screen Manager’ s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only .
English 18 3. ScreenManager 3-3. Useful Functions Adjustment Loc k Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed function • Settings in the ScreenManager . • Signal selection button (Color/Monochrome) Unlock ed function • Adjustment of br ightness b y the control buttons.
English 4. ADJUSTMENT 19 4. ADJUSTMENT 4-1. Screen Adjustment NO TE • Allow the LCD monitor to stabiliz e for at least 20 minutes bef ore making image adjustments.
English 20 4. ADJUSTMENT NO TE • More precise adjustment is av ailable f or using the “Screen Adjustment program” utility software . It can be downloaded from the EIZO homepage (http://www .eiz o .com/). 3. Adjust by using <Screen> menu in the ScreenManager .
English 4. ADJUSTMENT 21 (3) The screen position is incorrect. → Use the <Position> adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The <Position> adjustment moves the image to the correct position.
English 22 4. ADJUSTMENT 4. Adjust the output signal range (Dynamic Range) of the signal. → Use the <Range Adjustment> (p.41) of <Screen> menu.
English 4. ADJUSTMENT 23 4-2. Displaying lo w resolutions Using the <Screen Size> function in the <Others> menu enables to change the screen size of lower resolution (i.e. except 1280 x 1024). 1. Enlarge the screen size when displaying a low resolution.
English 24 4. ADJUSTMENT 3. Set the brightness of the black area surrounding the displayed image. → Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> m ode, the outer area (border) is usually black. Select <Border Intensity> in the <Others> menu and adjust by using the right and left buttons.
English 4. ADJUSTMENT 25 4-3. P o wer-sa ve Setup The <PowerManager> menu in the ScreenManager enables to set the power -save setup. NO TE • Do your part to conser ve energy , tur n off the monitor when y ou are finished using it. Disconnecting the monitor from the power supply is recommended to sa ve energy completely .
English 26 5. CALIBRA TION 5. CALIBRA TION The calibration is available when using the specified optional calibration kit (p.38). Accessories for Calibration Kit • Photo Sensor x 1 • Maintenance cable x 4 • Calibration Software 1. Confirm the graphics board settings (If the graphics board has the settings below).
English 5. CALIBRA TION 27 NO TE • Lead the maintenance cables into the cab le holder after connecting (p.14). • Brightness adjustment is not av ailabl e while the calibrating the monitor . • After the calibration, brightness and other functions are automatically lock ed.
English 28 6. MAKING USE OF USB (Univ ersal Ser ial Bus) 6. MAKING USE OF USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
English 6. MAKING USE OF USB (Univ ersal Ser ial Bus) 29 After connecting the USB cable, the USB function can be set up automatically . 3. After setting up, the monitor’ s USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor .
English 30 7. A TT A CHING AN ARM ST AND 7. A TT A CHING AN ARM ST AND The LCD monitor can be used with an ar m stand by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • Use an arm stand that satisfies the followings .
English 7. A TT A CHING AN ARM ST AND 31 4. Remove the tilt stand by loosening the screws. (4 pcs of M4 x 15 mm BZn/Fe) 5. Attach an arm stand to the LCD monitor securely .
English 32 8. TROUBLESHOO TING 8. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems → See No.1 ~ No.2 • Imaging problems → See No.3 ~ No.13 • Other problems → See No.
English 8. TROUBLESHOO TING 33 Prob lems P oints to check with possib le solutions 3. Display position is incorrect. ! Adjust the image position using the <Position> (p.21) If the problem persists, use the graphics board’ s utility software to change the display position if available.
English 34 8. TROUBLESHOO TING Prob lems P oints to check with possib le solutions 10. The screen is too bright or too dark. ! Adjust the <Brightness> (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker , please contact your dealer .
English 8. TROUBLESHOO TING 35 Prob lems P oints to check with possib le solutions 17. The A uto adjustment button does not operate. ! The adjustment lock is probably on. T o unlock: switch the LCD monitor off. Then, while pressing the Auto adjustment button, switch the power on.
English 36 9. CLEANING 9. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ver use thinner , benzene , alcohol (et hanol, methanol, or isoprop yl alcohol), abrasiv e cleaners, or other strong solvents , as these may cause damage to the cabinet or LCD panel.
English 10. SPECIFICA TIONS 37 10. SPECIFICA TIONS LCD P anel 46 cm (18.1 inch), TFT Monochrome LCD panel Anti-Glare Hard coating 2H Viewing Angle Horizontal: 170 ° , V e rtical: 170 ° Dot Pitch 0.
English 38 10. SPECIFICA TIONS Cer tifications and Standards TÜV Rheinlan d /GM, CB, NR TL/C-TÜV , CE (93/42/EEC), FCC-A, Classification of equipment T ype of protection against electric shock: Clas.
English 10. SPECIFICA TIONS 39 Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data2- 11 TMDS Data1/3 Shield 21 NC 2 TMDS Data2+ 12 NC 22 TMDS Clock shield 3 TMDS Da.
English 40 10. SPECIFICA TIONS USB Ports Preset Timing Chart for Analog input Based on the signal diagram shown below 25 fact ory presets have been registered in the monitor's microprocessor . Dot Clock MHz Frequencies Sync P olarity Mode H kHz V Hz H V V GA 640 × 480 25.
English 11. GLOSSAR Y 41 1 1 . GLOSSAR Y Afterimage The Afterimage is particular to LCD monito rs when the monitor screen is left on for a long period without use.
English 42 11. GLOSSAR Y Resolution The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO G11 display panel consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are displayed as a full screen.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence when the equipment is operated in a commercial environment.
Een belangrijk punt na aankoop van elk apparaat Eizo G11 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Eizo G11 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Eizo G11 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Eizo G11 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Eizo G11 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Eizo G11 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Eizo G11 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Eizo G11 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
