Gebruiksaanwijzing /service van het product L363T-C van de fabrikant Eizo
Ga naar pagina of 44
User’ s Manual T ouch Panel Color LCD Monitor It shall be assured that the fi nal system is in compliance to IEC60601-1-1 requirements..
English 2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening.
English T ABLE OF CONTENTS 3 T ABLE OF CONTENTS PRECA UTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been adjusted specific ally for use in the region to which it was originally shipped. If operated outsi de the region to which it was originally shipped, the product may not per form as stated in the specifications.
English PRECA UTIONS 5 WA R N I N G If the unit begins to emit smoke, smells like something is b urning, or makes strange noises, disconnect all power connection s immediately and contact y our dealer for advice. Attempting to use a malfunctionin g unit can be dangerous.
English 6 PRECA UTIONS WA R N I N G T o av oid dang er of suffocation, keep the plastic packing ba gs awa y from babies and c hildren. Use the enc losed po wer cor d and connect to th e standar d power outlet of your coun try . Be sure to remain within the rated v oltag e of the power cor d.
English PRECA UTIONS 7 WA R N I N G When attaching an arm stand, please refer to the user ’ s manual of the arm stand and install the unit secur ely with the enclosed scr ews. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage.
English 8 PRECA UTIONS CA UTION Do not touch the plug with wet hands. T ouching them may result in electric shock. Use an easil y accessible po wer outlet. This will ensure that you can disconnect the power quickly in case of a problem. P e riodically c lean the area around the plug.
English 1. INTRODUCTION 9 1. INTR ODUCTION Thank you very muc h for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant • DVI (p.
English 10 1. INTRODUCTION 1-3. Contro ls & Connector s Fr ont S I G . S I G . AUTO AUTO ENT. ENT. (4) (5) (6) (7) (8) (3) (1) (2) SIG. AUT O ENT .
English 1. INTRODUCTION 11 Rear (10) (9) (11) (12) (14) (15) (16) POWER INPUT POWER INPUT DVI D-SUB (13) (9) P ower Co nnector (10) USB P or t (Upstream) (11) Exter nal line in (ste.
English 12 2. CABLE CO NNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your mo nitor to the PC, change the display screen settin gs (resolution (p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the pow er s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear o f the monitor and the other end of the cable into the video connector on the PC.
English 14 2. CABLE CO NNECTION 2. Plug the power cord into the power connector on the rear of the monitor . Then, plug the other end of the cord into a power outlet. WA R N I N G Use the enc losed po wer cord and connect to th e standar d power outlet of y our country .
English 2. CABLE CONNECTION 15 NO TE • Whene ver finished, turn off the PC and the monito r . T ouch operation is ef f e ctiv e until tur ning off both PC and monitor . • F or the users with glo ves, w e recommend to use touch pa nel pointer , “TP1” (optional).
English 16 2. CABLE CONNECTION 2-4. Sound Connections NO TE • Alwa ys switch the monitor and audio de vices or computers off wh ene ver connecting or disconnecting an y audio devi ces (computer or CD pla yer) to the monito r . • Use the enclosed stereo mi ni-jac k cabl e f or connecting audio de vices or computers to the monitor .
English 3. ScreenManager 17 3. ScreenManag er 3-1. How to use the ScreenMana ger S I G . S I G . AUTO AUTO ENT. ENT. SIG. AUTO ENT. 1. Entering the ScreenManager Press the Enter Button once to display the main menu of the ScreenManager .
English 18 3. ScreenManager 3-2. Adjustments and Settings The following table shows all the ScreenManager’ s adjustment and setting menus. “*” indicates adjustments of an alog input only and “**” indicates di gital input only . Main menu Sub menu Reference Clock * Phase * P osition * Range Adjustment * Screen Smoothing 4-1.
English 3. ScreenManager 19 3-3. Useful Functions Adjustment Loc k Use the “Adjustment Lock ” function to prevent an y accidental changes. Lock e d function • Auto Adjustment Button adjustments and settings in the ScreenManager . Unlock ed function • Adjustment of brightness by the Control Buttons.
English 20 3. ScreenManager EIZO Logo disappearing function When switching on the Power Switch on the control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.
English 4. ADJUSTMENT 21 4. ADJUSTMENT The monitor displays the digital input image correctl y based on its pre-setting data. Adjust the brightn ess (p.24). 4-1. Screen Adjustment Screen adjustments for the LCD monito r should be used in suppressing screen flickering and also for adjusting the screen to its pr oper position.
English 22 4. ADJUSTMENT 2. W e recommend setting the desktop pattern to that as shown in the diagram below . NO TE • More precise adjustment is a vailab le f or using the “Screen Adjustment progr am” utility software. It can be downloaded from the EIZO hom epage (http://www .
English 4. ADJUSTMENT 23 (3) The screen position is incorrect. → Use the <Position> adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The “Position” adjustment moves the image to the correct position.
English 24 4. ADJUSTMENT 6. T o Set the Brightness of the screen. → Use the <Brightness> adjustment. The brightness of the entire screen is controlled by changing the brightness of the backlight. Select < Brightness > in the screen menu and adjust b y using the Up and Down Buttons.
English 4. ADJUSTMENT 25 4-2. Color Adjustment The <Color> menu in the ScreenManager enables to change the color of the scree n. By using the <Color Mode>, the adjustment mode can be selected from <Custom mo de> (to adjust the color settings according to your preference) and <sRGB> mode.
English 26 4. ADJUSTMENT Color Mode Menu Custom sRGB Function Descriptions Adjustable range T o change the saturation -128 ∼ 127 Setting the minimum le vel (-128) tur ns the image to the monochrome. Saturation √ - NO TE • The <Saturation> adjustment ma y cause undisplay a ble color tone .
English 4. ADJUSTMENT 27 4-3. P ower -save Setup The <PowerManager> me nu in the ScreenManager enables to set the power -save setup. NO TE • Do you r par t to conser ve energy , tur n off the monitor when y ou are finished using it. Disconnecting the monitor from the po wer supply is recommended to sa ve energy completely .
English 28 4. ADJUSTMENT P ower sa ve fo r speaker When the monitor is in the power -saving mode, sound of speaker also erases simultaneously can be performed. [Procedure] (1) Set the PC’ s power saving settings. (2) Select <Sound>. (3) Select “Disable”.
English 5. A TT A CHING A ST AND 29 5. A TT A CHING A ST AND The LCD monitor can be used with othe r stand by removing the tilt stand and attac hing the stand to the LCD monitor . NO TE • If you will use the other stand, confirm the follo wings to the manufacturers bef ore selecting.
English 30 6. TROUBLESHOO TING 6. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems : See No.1 ~ No.2 • Imaging problems : See No.3 ~ No.9 • Other problems : See No.
English 6. TR OUBLESHOO TING 31 Prob lems P oints to check wi th possible solutions 3. Display position is incorr ect. Adjust the image position using the <Position> (p.23) The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings.
English 32 6. TROUBLESHOO TING Prob lems P oints to check wi th possible solutions 10.The <Smoothing> cannot be selected. <Smoothing> is disabled when the screen i s displayed in the 1024 x768. 11.The Enter Button does not operate. The adjustment lock is probably on.
English 6. TR OUBLESHOO TING 33 • T ouch Panel problems Prob lems P oints to check wi th possible solutions 14.Cursor is jittery . / Drawing lines are not straight and smooth. The influence of metal may cause jittery cursor . Using the monitor with dual-monito r system may cause jittery cursor .
English 34 7. CLEANING 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ver use thinner , benzen e, ethanol, ab rasiv e cleaners, or other st rong solv ents, as these ma y cause damage to the cabinet or panel.
English 8. SPECIFICA TIONS 35 8. SPECIFICA TIONS L363T -C LCD P anel 38 cm (15.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: H: 170 ° , V : 170 ° (CR ≥ 10) Response T ime: approx.
English 36 8. SPECIFICA TIONS T emperature Operating: 0 ° C ~ 35 ° C (32 ° F ~ 95 ° F) Storage: -20 ° C ~ 60 ° C (-4 ° F ~ 140 ° F) Humidity 30% to 80% R.
English 8. SPECIFICA TIONS 37 L353T -C LCD P anel 38 cm (15.0 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: H: 150 ° , V : 160 ° (CR ≥ 5) Response T ime: approx.
English 38 8. SPECIFICA TIONS T emperature Operating: 0 ° C ~ 35 ° C (32 ° F ~ 95 ° F) Storage: -20 ° C ~ 60 ° C (-4 ° F ~ 140 ° F) Humidity 30% to 80% R.
English 8. SPECIFICA TIONS 39 Default settings Analog input Digital input Brightness 100% Smoothing 3 T emperature Off (normal white: appro x. 6500 K) P owerManager VESA DPMS D VI DMPM Input Signal Auto Off T imer Disable Language English Optional T ouch P anel P ointer TP1 Dimensions Unit mm (inches) 235 (9.
English 40 8. SPECIFICA TIONS Pin Assignment D-Sub mini 15 pin connector Pin No. Signal Pin No. Signal Pin No. Signal 1 Red video 6 Red ground 1 1 Ground Shor ted 2 Green video 7 Green ground 12 Data (SD A) 3 B lue video 8 Blue ground 13 H. Sync 4 Ground 9 No pin 14 V.
English 9. GLOSSAR Y 41 9. GLOSSAR Y Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use.
English 42 9. GLOSSAR Y Gamma Generally , the relationship that the light intensity values of a monitor change nonlinearly to the input signal level is called “Gamma Characteristic”. On the monitor , low gamma values display the whitish images and high gamma values display the high contrast images.
i APPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Über sichten für Analog Ein gang Synchr onis ation des Signaux pour Analog numerique Based on the signal diagram show n below 12 factory presets ha ve been registered in the monitor's microprocessor .
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör ge hörige Schwenkarm verwendet wird, muss statt dessen ein gee igneter anderer Schwenkarm instal liert werden.
Een belangrijk punt na aankoop van elk apparaat Eizo L363T-C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Eizo L363T-C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Eizo L363T-C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Eizo L363T-C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Eizo L363T-C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Eizo L363T-C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Eizo L363T-C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Eizo L363T-C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
