Gebruiksaanwijzing /service van het product L565 van de fabrikant Eizo
Ga naar pagina of 42
User’ s Manual Color LCD Monitor.
English 2 SAFETY SYMBOLS This manual uses the safety symbols bel ow . They denote critical information. Please read them carefully . W ARNI NG Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening.
English T ABLE OF CONTE NTS 3 T ABLE OF CONTENTS PRECA UTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been a djusted specifically f or use in the region to which it was originally shipped. If operated outside th e region to which it wa s originally shipped, the product ma y not perf or m as stated in the specifications.
English PRECA UTIONS 5 WA R N I N G Keep small objects or liquids a way fr om the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS WA R N I N G The equipment m ust be connected to a ground ed main outlet. Not doing so may cause in fire or electric shock. Use the correct v oltage. * Do not overload your power circuit, as this may result in fire or electric shock.
English PRECA UTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the p ower cord and cables when movin g the unit. Movin g the unit with the cord attached is dangerous.
English 8 PRECA UTIONS LCD P anel The screen may have defective pixels. Thes e pixels may appear as slightly light or dark area on the screen. This is due to the char acteristics of the panel itself, and not the product. The backli g ht of the LC D p anel has a fixed life s p an.
English 1. INTR ODUCTION 9 1. INTR ODUCTION Thank you very muc h for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant • DVI (p.34) Digital input (TMDS (p.35 )) compliant. • Horizontal scanning frequency: 24.8 - 80 kHz (Digital input: 31.
English 10 1. INTRODUCTIO N 1-3. Controls & Connector s Fr ont S I G . S I G . AUTO AUTO ENT. ENT. (4) (5) (6) (7) (8) (9) (3) (1) (2) SIG. AUT O ENT .
English 1. INTR ODUCTION 11 Rear (11) (10) (12) (13) (14) (15) (16) (10) P ower Connec tor (11) Exter nal line in (stereo mini -jac k) (12) D VI-D Input Connector (Signal 1) (13) D-Sub mini 15 pin Inp.
English 12 2. CABLE CO NNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your mo nitor to the PC, ch ange the display screen settings (res olution (p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the pow er s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the c onnector at the rear o f the monitor and the other end of the cable in to the video connector on the PC.
English 14 2. CABLE CO NNECTION 2. Plug the power cord into the power connector on the rear of the monitor . Then, plug the other end of the cor d into a power outlet. WA R N I N G Use the enc losed po wer cor d and connect to th e standar d power outlet of y our country .
English 2. CABLE CONNECTION 15 2-3. Sound Connections NO TE • Alwa ys switch the monitor and audio de vi ces or computers off whene ver connecting or disconnecting an y audio devi ces (computer or CD pla yer) to the monitor . • Use the enclosed stereo mini-ja ck cab le fo r conn ecting audio de vices or computers to the monitor .
English 16 3. ScreenManager 3. ScreenMana g er 3-1. How to use the ScreenMana ger S I G . S I G . AUTO AUTO ENT. ENT. SIG. AUTO ENT. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenM anager . [Main Menu ] 2.
English 3. ScreenManager 17 NO TE • Double clicki ng the Enter b utton at any time also e xits the ScreenManager men u. 3-2. Adjustments and Settings The following table shows all the ScreenMa nager’ s adjustment and setting menus. “*” indicates adjustments of analog input only and “** ” indicates digital input only .
English 18 3. ScreenManager 3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock ” function to prevent an y accidental chan ges. Lock ed function • Auto adjustment b utton adjustments and settings in the ScreenManager . Unlock ed function • Adjustment of contrast and br ightness b y the control buttons.
English 3. ScreenManager 19 EIZO Logo disappearing function When switching on the power button o n the front panel, the EIZO logo is displyed for a while. If you desire to display or undisplay th is logo, use this function. (Default is logo appearing.
English 20 4. ADJUSTM ENT 4. ADJUSTMENT The monitor displays the digital input im age correctly based on its pre-setting data. Adjust the con trast and brightness (p.23). 4-1. Screen A djustment Screen adjustments for the LCD m onitor should be used in suppressi ng screen flickering and also for adjusting the screen to its pr oper position.
English 4. ADJUSTMENT 21 3. Adjust by using <Screen> menu in the ScreenManager . (1) V ertical bars appear on the screen → Use the <Clock> (p.34) adjustment. Select the <Clock> and eliminate the vertical bars by using the right and left of the control buttons.
English 22 4. ADJUSTM ENT 4. T o adjust the output signal range (Dynamic Range) of the signal. → Use the <Range Adjustment> (p.35)of <ColorManagerment> menu. This controls the level of output signal range to display the whole col or gradation (256 colors).
English 4. ADJUSTMENT 23 6. T o set the Contrast of the screen. → Use the <Contrast> adjustment. This controls the brightness f or the each colo r (red, bl ue and green ) at the same time. Select <Contrast/Brightness> and adjust b y using the right and left buttons .
English 24 4. ADJUSTM ENT 4-2. Color Adjustment The <ColorManagemen t> menu in the ScreenMa nager enabl es to change the color of the screen. By using the <Color Mode>, the adjus tment mode can be selected from <Custom mode> (to adjust the color settings acc ording to your preference) and <sRGB > mode.
English 4. ADJUSTMENT 25 NO TE • The “Hue” adjustment ma y cause undispl a y abl e color tone . T o change each color (red, green and blue). → Use the <Gain> (p.34)adjustment. By adjusting the red, green and blue colo r tones for each mode, custom colors can be defined.
English 26 4. ADJUSTM ENT Digital input This monitor complies with the DVI DMPM (p.34). [Procedure] (1) Set the PC’ s power saving settings. (2) Select “DVI DMPM” from the “PowerManager” menu.
English 5. A TT ACH ING AN ARM S T AN D 27 5. A TT A CHING AN ARM ST AND The LCD monitor can be used with an ar m stand by re moving the tilt stand and attaching the arm s tand to the LCD m onitor . NO TE • Use an arm stand that satisfies the follo wings.
English 28 6. TROUBLE SHOO TING 6. TR OUBLESHOO TING If a problem persists even after applying the sugges ted remedies, contact an EIZO dealer . • No picture problems : See No.1 ~ No.2 • Imaging problems : See No.3 ~ No.11 • Other problems : See No.
English 6. TROUBLE SHOO TING 29 Prob lems P oints to check with pos sible solutions 3. Display posi tion is incorrect. Adjust the image position using the <Position> (p.21) The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings.
English 30 6. TROUBLE SHOO TING Prob lems P oints to check with pos sible solutions 10. Fingerprints remain on the screen. Leaving the screen white may solve the problem. 11. The <Smoothing> canno t be selected. <Smoothing> is disabled when the screen is displayed in the 1280 x 1024.
English 7. CLEANING 31 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne v er use thinner , benzene , alcohol (ethanol, methanol, or isoprop yl alcohol), abrasiv e cleaners, or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
English 32 8. SPECIFICA TIONS 8. SPECIFICA TIONS LCD P anel 43 cm (17.0 inch), TFT color L CD panel with A nti-Glare Hard Coating Vie w ing Angle: H: 170 ° , V : 170 ° Dot Pitch 0.264 mm Horizontal Scan F requency 24.8 kHz - 80 kH z (A utomatic) (Digital): 31.
English 8. SPECIFICA TIONS 33 Default settings Analog input Digital input Contrast 100% Brightness 100% Smoothing 3 Color Management Custom mod e / Off (Normal white) P owerManager VESA DPMS D VI DMPM Input Signal Auto Off Timer Disable Language English Dimensions Unit mm (inches) 63(2.
English 34 9. GLOSSAR Y 9. GLOSSAR Y Afterimage The Afterimage is particular to LCD moni tors when the monitor screen is left on for a long period without use.
English 9. GLOSSAR Y 35 Phase The phase adjustment decides the sampling timing point for convertin g the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal ran ge to display the wh ole color gradatio n.
APPENDIX/ANHANG/ANNEXE i APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Über sichten für Ana log Eingang Synchr onis ation des Signaux pour Analog n umerique Based on the signal diagram show n below 20 factory presets ha ve been registered in the monitor's microprocessor .
ii APPENDIX/ANHANG/ANNEXE Sync P olarity Freque ncies A: Fr ont P orch B: Sync P eriod Mode Dot Clock MHz H V H kHz V Hz H µs/Dot V ms/Line H µs/ Dot V ms/ Line VGA 640 × 480 25.2 Nega. Nega. 31.47 59.94 0.636/ 16 0.318/ 10 3.813/ 96 0.054/ 2 VGA 720 × 400 28.
APPENDIX/ANHANG/ANNEXE iii C: Back P orch D: Blanking P eriod E: Display P eriod F: T otal Cyc le H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Li ne H µs/ Dot V ms/ Li ne 1.907/ 48 1.049/ 33 6.356/ 160 1.430/ 45 25.442/ 640 15.253/ 480 31.
[Applicable to gray (standard color version only).] Congra tulations! Y ou have just purchased a TCO’99 appr oved and labelled product! Y our choice has provided you with a product de veloped for professional use.
Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consi st of flame retard ant substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNO LOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan L565 is in conformity with Part 15 of the FCC Rule s.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nac h EK1-ITB 2000 mit dem V ideosignal, 1280 Punk te × 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
Een belangrijk punt na aankoop van elk apparaat Eizo L565 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Eizo L565 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Eizo L565 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Eizo L565 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Eizo L565 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Eizo L565 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Eizo L565 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Eizo L565 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
