Gebruiksaanwijzing /service van het product SANTO U 86040 i van de fabrikant Electrolux
Ga naar pagina of 32
SANT O U 86040 i Built-In Refriger ator Oper ating and Installation Instructions.
2 Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e unsure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
Important Safety Instructions 5 • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted.
Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temper ature. The appliance should therefor e – not be exposed.
Installation 8 3. Re-install the grid to the base of the appliance by pushing on to the clasps (a) until they click. a a 6 8 7 2 Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es.
Installation 3 10 11 9 12 13 Warning! After completion of the door rever sing opera- tion, check that the door gasket adheres to the cabi- net. If the ambient temper- ature is cold (i.
Installation 10 Installation kit ☞ Building the appliance in under a worktop The dimensions of the recessed installation area must corr espond with those indicated in the figure. ☞ 600 550 min. 600 1 1xA 12 1xB 2xC 2 2 1 1 2 2. To fit these br ackets remove the two scr ews at the top left and right hand front corner s of the cabinet.
Installation 11 4. Push the appliance into place. The plug socket nec- essary for connection of the appliance to the elec- tricity supply should be positioned, so that the plug is not placed in the recess. To adjust the height pr o- ceed as follows: 5.
Installation 12 4 11 5 ° 9. To mount the furnitur e door proceed as shown in the fig- ures: 6 a b 10 1 2 3 4 C 8. Push the appliance into place and r etain the cab- inet with screws thr ough the securing brackets into the worktop or adjacent woodwork as necessary .
Installation 13 7 8 ab clic clic c C C.
Installation 14 Upper part of kitchen furniture panel Lower part of kitchen furniture panel 9/a 275 275 max 100 11 = = 10 9 b a = = 1 2 10 1 2 3 45 °.
Installation 15 10. Refit the covering strip. 13 A 12.
Installation 16 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=1 00 mm, the plinth may be fitted without adjustments.
17 Installation The mains cable may only be changed by a qualified electrician or competent person. If your appliance needs r epairing, please contact your local AEG Service Force Centr e. Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person.
➀ Butter/cheese compartment ➁ Sliding shelf ➂ Bottle shelf ➃ Vegetable dr awers ➄ Storage shelves ➅ Thermostat ➆ Frozen food stor age/freezing food, icemaking.
Starting up and temper ature r egulation Important! Only use the appliance when built–in! ☞ 1. Connect the appliance to the mains electricity supply . When the refriger ator compartment door is opened, the internal light- ing is switched on. The temperatur e control knob is located on the right hand side of the refriger ator compartment.
If this happens, turn the thermostat knob back to a warmer setting (position “3” to “4”). At this setting the compressor will be switched on and off as usual and automatic defrosting r ecommenced. Switching off the appliance To switch off the appliance, turn the temper ature r egulator to position "0".
Correct stor age 21 Corr ect storage This symbol means that deep-frozen food can be kept for some months in the freezer compartment. The length of storage time depends on the type of food - see manu- facturer’ s instructions. However , small quantities of fresh foods can be frozen (see: “Fr eezing and storage”).
22 Fr eezing and storing frozen food The freezer compartment is for fr eezing and storing food. Important! • The temper ature in the freezer compartment must be –18°C or cold- er before fr eezing fresh food or storing food alr eady frozen. • Do not fr eeze too large a quantity at any one time (max.
23 Pr eparation of Ice Cubes ☞ 1. Fill the ice cube tray 3/4 full with cold water , place it in the fr eezer compartment and leave to freeze. 2. To loosen the fr ozen cubes, either bend the ice cube tray or hold it under running water for a few seconds.
Cleaning and Care 24 Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning. Danger of electrical shock.
Cleaning and Care 25 3. Switch the appliance off and remove the plug fr om the mains, or dis- connect from the electricity supply . 4. Clean the appliance and the interior accessories with a cloth and luke- warm water . 5. After cleaning wipe with fresh water and rub dry .
26 Ener gy Saving Tips • Do not install the appliance near boiler s, radiators or other sour ces of heat. High ambient temperatur es cause longer , more frequent operation of the compr essor . • Ensur e sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance.
What to do if ... 27 Temper ature is set too cold. Turn the thermostat knob to a warmer setting tem- porarily . The compressor runs con- tinuously . Symptom P ossible Cau se Remedy The food is too warm. Temper ature is not proper- ly adjusted. Please look in the “Initial Start Up” section.
28 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0".
29 Regulations , Standards , Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
30 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise.
.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2003 2222 682-25 -02- 0 103 Subject to change without notice.
Een belangrijk punt na aankoop van elk apparaat Electrolux SANTO U 86040 i (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Electrolux SANTO U 86040 i heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Electrolux SANTO U 86040 i vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Electrolux SANTO U 86040 i leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Electrolux SANTO U 86040 i krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Electrolux SANTO U 86040 i bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Electrolux SANTO U 86040 i kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Electrolux SANTO U 86040 i . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.