Gebruiksaanwijzing /service van het product 2400LM van de fabrikant Elo TouchSystems
Ga naar pagina of 51
Touchmonitor User Guide 2400LM 24” LCD Des ktop T ouchmonitor.
Elo T ouchSyste ms 24” LCD T ouchmonitor User Guide Revision C SW601252 Elo T ouchSyste ms 1-800-ELOTOUCH www.elotouch.com.
Copyright © 2010 T yco Electr onics. All Rights Re served. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval syste m, or tra nslated into a ny la nguage.
W arnings a nd Caution s W arning • Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other flammable materials. • To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture.
Caution • Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord. • This unit must follow the national requirement and local state laws to dispose unit. • Before connecting the cables to your Elo touchmonitor, make sure all components are powered OFF.
CAUTION-Life Support Care must be taken when this touchmonitor is a critical component of a life support system or device. In case of failure of this touchmonitor, appropriate redundant systems should be incorporated into the system or device to prevent injury to the user or patient.
Cla ssification With respect to electrical shock, fire in accordance with UL60601-1 and CAN/CSA C22.2 No. 60601-1 This monitor is a Class I (GROUNDED) DEVICE.
viii European Standards and Classifications Sta ndards: EN 60601-1-2: 2001+A1:2004 The EMC limits and test methods are referred to the following standards: Emission: Immunity CISPR 11: 2003+A1:2004 IE.
Guida nce a nd ma nufa cturer’s de claration-ele ctromagnetic e missions The ET2400LM is intended for use in the electromagnetic environment specified below. The customer or the user of the ET2400LM should assure that it is used in such a n environment.
Guida nce a nd ma nufactur er’s de claration-electr omagnetic i mmunity- for all EQUIPMENT AND SYSTEMS Guida nce a nd ma nufa ctur er’s declaration-ele ctromagnetic i mmunity The ET2400LM is intended for use in the electromagnetic environment specified below.
Guida nce a nd ma nufa ctur er’s declaration-ele ctromagnetic i mmunity The ET2400LM is intended for use in the electromagnetic environment specified below.
Recommended se paration dista nce s between porta ble a nd mobile RF communications equi pment a nd the ET2400LM The ET2400LM is intended for use in a n electromagnetic environment in which ra di ated RF disturba nces are controlled.
Warnings and Cautions ................................................. iv Warning ................................................................. iv Caution ................................................................... v Caution-Life Support .
C H A P T E R 1 I NTRODUCTION Product Description The 2400LM is a medical display designed to pre sent information to the operator a nd the customer . The 2400LM is availa ble in seri al a nd USB(combo) touch interface a s well a s non-touch. The 2400LM functionally consists of a 24” LCD main display with a touchscreen.
LCD Display Perf orma nce Fe ature s 24” TFT LCD Display Pa nel Display format 1920x 1200 Display area 518.4 mm (H) x 324.0 mm (V) Pixel pitch 0.270 mm (H) x 0.
C H A P T E R 2 I NSTALLATION A ND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software.
Product Overview Main Unit Back Unit Side View 2-4.
Ba se Bottom V iew Kensington TM Lock The Kensington TM lock is a security device that prevents theft. T o find out more a bout this security device, go to http://www.
2-6.
T ouch Interfa ce Connection NOTE: Before connecting the ca bles to your touchmonitor a nd PC, be sure that the computer a nd touchmonitor are turned off. Re move the Ca ble Cover The ca ble s are connected at the ba ck of the monitor . T o remove the cover , gra sp the lip of the cover a nd pull towards you until it snaps.
STEP 1-Connecting the Video Cable • T ilt the screen up a nd back to a ccess the connection ports. • Connect the 15-pin video ca ble (the f errite bea d end) or 24-pin D VI-D ca ble to the video port on your PC. • Connect the other end of the video ca ble to the video connector on your touchmonitor .
STEP 2-Connecting the Serial a nd USB T ouchscreen Cable • Connect the fe male end of the seri al (RS-232) ca ble to the seri al port on your PC, or connect the USB( ) touchscreen cable to the USB( ) touchscreen connector on the back of your touchmonitor.
STEP 3-Connecting the Spe aker Ca ble • Connect the light blue end of the speaker ca ble to the light blue speaker port to the monitor (audio in). • Connect the li me (light green) end of the speaker ca ble to the lime speaker port on the computer (audio out).
STEP 4-Connecting the Power Cable Depending on where you live, you will use e ither the Europea n or US/Ca na d i a n power ca ble. • Connect the fe male end of the power ca ble to the medical gra de power a daptor . • Connect the brick power cable into the power port on the touchmonitor.
Re pla ce the Cable Cover Then you have atta ched all the ca bles to the monitor , gently bring all the ca bles toward the sta ndard so they fit under the cover lip. Re move the screw from a ccessory a nd insert the screw into ca ble cover . Snap the Ca ble cover in place over the connections.
Mounting the Display Your medically certified touchscreen display conforms to the VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI) standard.
2-14 Rear Mounting Using the VESA Interface 1 If the display is alrea dy connected to a pedestal, remove the f our screws that connect the pedestal to the display (refer to Figure2-1 , item 1 ). Separate the pedestal from the display. 2 Reinstall the four screws into the VESA interface mount.
Optimizing the LCD Display T o ensure the LCD display works well with your computer, configure the display mode of your gra phic card to make it less tha n or equal to 1920 x 1200 resolution, a nd make sure the timing of the display mode is compatible with the LCD display .
In stalling the Serial T ouch Driver In stalling the Seri al T ouch Driver f or Windows 7, W indows V ista, Windows XP , Windows 2000, ME, 95/98 a nd NT4.0. NOTE: For W indows 2000 a nd NT4.0 you must have a dministrator a ccess rights to install the driver.
In stalling the Seri al T ouch Driver f or MS-DOS a nd Windows 3.1 Y ou must have a DOS mouse driver (MOUSE.COM) installed f or your mouse if you wish to continue using your mouse along with your touchmonitor in DOS.
In stalling the USB T ouch Driver In stalling the USB T ouch Driver f or W indows 7, Windows V ista, Windows XP , Windows 2000, ME and Windows 98. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows 98 or W indows 2000 starts the Add New Hardware W izard, do the following: 2 Choose Next .
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will unlikely require a djustment. V ariations in video output a nd a pplication may require a djustments to your touchmonitor to optimize the quality of the display .
Bottom Pa nel Controls Control Function 1 Menu/Exit Display/Exits the OSD menus. 2 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Shuffle item clockwise. 3 1. Enter audio volume adjustment. 2. Decrease value of the adjustment item.
Controls and Adjustment OSD Menu Functions To Display and Select the OSD Functions: 1 Press the Menu key to activate the OSD menu. 2 Use or to move clockwise or counterclockwise through the menu. Press the select key on the monitor. The parameter will be highlighted when selected.
OSD Control Options Control Description Contrast Increases or decreases contrast. Brightness Increases or decreases brightness. V-Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings.
Power Display & Power Saving General Power Saving Mode Power Mode Consumption On 56.4w max.(DC power) Sleep 4w max. (DC power a nd without Audio performing) 15w max. (DC power a nd with Audio performing) Off 2w max. T ested with the USB ca ble unplugged.
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the f ollowing ta ble. If the proble m persists, please contact your local dealer or the Elo service center. Solution s to Common Proble ms Problem S u g g e s t i o n ( s ) The monitor does not respond 1 .
A P P E N D I X A N A TIVE R ESOLUTION The native resolution of a monitor is the re solution level at which the LCD pa nel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1920 x 1200 for the WUXGA- 24 inch size. In almost all cases, screen images look best when viewed at their native resolution.
As a n example, a SV GA resolution LCD pa nel ha s 800 pixels horizontally by 600 pixels vertically . Input video is also represented by the same terms.
A P P E N D I X B T OUCHMONITOR S AFETY This ma nual contains information that is i mporta nt for the proper setup a nd maintena nce of your touchmonitor . Bef ore setting up a nd powering on your new touchmonitor, rea d through this ma nual, especi ally Cha pter 2 (Installation), a nd Cha pter 3 (Operation).
Care a nd Ha ndling of Y our T ouchmonitor The following tips will help keep your touchmonitor functioning at the optimal level. • T o avoid risk of electric shock, do not disasse mble the brick power supply or display unit ca binet. The unit is not user servicea ble.
A P P E N D I X C T ECHNICAL S PECIFICA TIONS Display Mode s Your Elo touchmonitor is compatible with the following standard video modes: Item Resolution Type H.Scan(KHz) V. Scan(Hz) Polarity 1 64 0 x 4 80 V G A 31.468 25.175 - / + 2 8 0 0 x 6 0 0 VESA 56 35.
T ouchmonitor Specification s Model 2400LM LCD Display 24” TFT Active M atrix Pa nel Display Size 518.4(H) x 324.0(V) mm Pixel Pitch 0.270(H) x 0.270(V) mm Display Mode V GA 640 x 480 (60 Hz) SV GA .
Power Supply Specification The T ouchcomputer shall be powered by 12V DC from a universal type power supply brick with the following characteristics: Input voltage 100 to 240 V~ Input frequency 50/60 Hz Output voltage 12 V Output loa d regulation +/- 5%, Line regulation +/- 1% Output current=6.
C-32 24” LCD T ouchmonitor (2400LM) Dimen sion s 449.86 592.40 233.00 71.00 398.59 293.35 43.00.
R EGULA T OR Y I NFORMA TION I. Electrical Safety Information: A) Complia nce is required with respect to the voltage, frequency , a nd current requirements indicated on the ma nufacturer’s la bel.
D ) General Information to all Users: This equi pment generates, uses a nd ca n ra diate ra dio frequency energy . If not installed a nd used according to this ma nual the equi pment may cause interference with ra dio a nd television communications.
III. Agency Certification s The following certifications have been issued for this monitor: • Australia C-Tick • Ca na da cUL • Ca na da IC • Europe CE • Japa n VCCI • United States FCC .
W ARRANTY Except a s otherwise stated here in or in a n order acknowledgment delivered to Buyer , Seller war - ra nts to Buyer that the Product shall be free of defects in materi als a nd workma nship. The warra nty for the touchmonitors a nd components of the product is 3 (three) years.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TU.
© 2010 T yco Electronics. Printed in USA Che ck out Elo’s Website! www.elotouch.com Get the late st... • Product information • Spe cifications • News on upcoming events • Pre ss rele a se .
Een belangrijk punt na aankoop van elk apparaat Elo TouchSystems 2400LM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Elo TouchSystems 2400LM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Elo TouchSystems 2400LM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Elo TouchSystems 2400LM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Elo TouchSystems 2400LM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Elo TouchSystems 2400LM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Elo TouchSystems 2400LM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Elo TouchSystems 2400LM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
