Gebruiksaanwijzing /service van het product 3300 van de fabrikant Emerson
Ga naar pagina of 146
www .rosemount.com Reference Manual 00809-0100- 4811, Rev CA February 2006 Rosemount 3300 Series Guided W ave Radar Level and Interface T ransmitters.
.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Rosemount 3300 Series Guided W ave Radar Level and Interface T ransmitters . . . Rosemount and the Rosemount logotyp e are regist ered trademarks of Rosemount Inc.
.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com T able of Content s SECTION 1 Introduction Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Manual Overview .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series TOC -2 Non-Intrinsically Safe Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Intrinsically Safe Output . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Manual 00809-0100- 4811, Rev CA February 2006 TOC -3 Rosemount 3300 Series SECTION 6 Service and Troubleshooting Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Advanced Configuration . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series TOC -4.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 1 Introduction Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 1- 1 Manual Overview . . . . . . . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 1-2 MANUAL OVERVIEW This manual provides inst allation, configuration and maintenance information for the Rosemo un t 33 00 Series Ra da r Transmitter.
Reference Manual 00809-0100- 4811, Rev CA February 2006 1-3 Rosemount 3300 Series SERVICE SUPPORT T o expedite the return process outs i de of the United S tates, cont act the nearest Rosemount represen tative. Within the United S t ates, call the Rose mount Nation al Response Center using the 1-800-654-RSMT (77 68) toll-free number .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 1-4.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 2 T ransmitter Overview Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 2-1 Applications . . . . . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-2 APPLICATIONS The Rosemount 3300 Series Radar Tr ansmitter program is suited for aggregate (tot al) level measurement s on most liquids, semi-liquids, and liquid/liquid interfaces.
Reference Manual 00809-0100- 4811, Rev CA February 2006 2-3 Rosemount 3300 Series Separator tank. The Rosemount 3302 measures both level and interface level. The Rosemount 3300 series is a good choice for underground tanks since it is installed on the tank top with the radar pulse concentrated near the probe.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-4 COMPONENT S OF THE TR A N S M I T T E R The Rosemount 3300 Series Radar T ransmitter has an aluminum transmitt er housing which con tains advanced e lec tronics for signal processing.
Reference Manual 00809-0100- 4811, Rev CA February 2006 2-5 Rosemount 3300 Series SYSTEM ARCHITECTURE The Rosemount 3300 Series Radar Tr ansmitter is loop-powered which means it us es the same t wo wires for both power supply and output signal. The output is a 4-20 mA a nalog signal superimposed with a digital HART signal.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-6 PROBE SELECTION GUIDE Use the following guidelines to choose appro pr iate probe for your 3300 transmitter: T able 2-1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 2-7 Rosemount 3300 Series Dead Zones The measuring rang e depends on probe type and properties of the prod uct. The Upper Dead Zone is the minimum measurement distance b etween the upper reference po int and the product surface.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-8 PROCESS CHARACTERISTICS The Rosemount 3300 Series has a hig h sensitivity d ue to it s advanced signal processing and hi gh signal to noise ra tio, which makes it able to handle various disturbance s.
Reference Manual 00809-0100- 4811, Rev CA February 2006 2-9 Rosemount 3300 Series Measuring Range The measuring rang e differs depending on pr ob e type and characteristics of the application. The values given in Ta b l e 2 - 4 can be used as a guid elin e fo r clean liquids.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-10 For measuring the interface level , the transmitter uses the residual wave of the first reflection. Part of the wave , which was not reflected at the upper product surface, continue s until it is reflected at the lowe r produ ct surface.
Reference Manual 00809-0100- 4811, Rev CA February 2006 2-1 1 Rosemount 3300 Series Emulsion Layers Sometimes there is an emulsio n layer (mix of the products) between the two products which, depending on its ch aracteristics, will af fect interface measurement s.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 2-12.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 3 Inst allation Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 3-1 Inst allation Procedure . . . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-2 High voltage that may be present on leads co uld cause electrical shock: Avoid contact with leads and terminals.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-3 Rosemount 3300 Series INST ALLATION PROCEDURE Follow these steps fo r proper installation: NOTE! Disconnect power supply befor e setting the Write Pro te ction.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-4 BEFORE Y OU INSTALL Alarm and Write Protection Switches Electronic bo ards are elec trostatically sensitive. F ailure to obse rve proper handling precautions for st at ic-sensitive component s can result in damage to the electronic components.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-5 Rosemount 3300 Series Figure 3-1. Switches for Alarm and Write Protectio n T o set the Alarm and Write Protect switches do the following: 1. Remove the cover on the cir cuit side (see main label).
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-6 MOUNTING CONSIDERATIONS Before you install the Ro semount 3300 Series Radar T ransmitter, be sure to consider sp ecific mounting requirements, vess el characteristic s and proc ess characteristics.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-7 Rosemount 3300 Series Flange Connection on Nozzles Figure 3-3. Mounting in nozzles The transmitter ca n be mounted in nozzles by using an appropriate fl ange. It is recommended that the nozzle size is with in the dimensions given in T able 3-4 .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-8 Inst allation of Single Lead Probes in Non-met allic T anks For optimal single lead pr obe performance in non-m etallic tanks the probe must be mounted with a met al flange, or screwed in to a metal sheet (d >8 in.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-9 Rosemount 3300 Series Mounting in Still pipes/by-pass pipes In order to prevent the probe fr om contacting the bridle wall when replacing displacers or installing in pipes, centering discs ar e available for the Rigid Single, Flexible Single and F lexible T win Lead probes.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-10 Free S pace For easy access to the transmitter make sure that it is mounted with suf ficient service space. For maximum measurement performance the transmitter should not be mounted too close to the t ank wall or other objects in the t ank.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-1 1 Rosemount 3300 Series Recommended Mounting Position When finding an approp riate mounting position for the transmitter th e conditions of the t ank must be carefu lly considered.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-12 Insulated T anks For insulated t anks the permitted ambient temperature is limited above a certain process t emperature. Limitations depend on the thickn ess of the tank insulation, see “Ambient T emperatur e“ on page A-6 for more information.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-13 Rosemount 3300 Series MECHANICAL INST ALLATION Mount the transmitter with flange on a nozzle on top of th e tank. The transmitter can also be mounted on a threaded connection. Make sure only qualified pers on ne l perfo rm the installation.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-14 Figure 3-1 1. Threaded t ank connection. 1. For t ank connections with BSP/G threads, place a gasket on top of the tank flange, or use a sealant on the thre ads of the tank connection.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-15 Rosemount 3300 Series Shortening the Probe Flexible T win/Single Lead Rigid Single Lead 1. Cut the Single L ead probe to the desired length. 2. Update the transmitter configuration to the new probe len gth, see “Probe Length“ on p age 4-9.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-16 Rigid T win Lead The spa cers are put closer together at the probe end . Th e ma xim u m am o unt that can be cut away is related to the ordering length L . T o cut a Rigid T win Lead probe do the following: 1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-17 Rosemount 3300 Series Coaxial T o cut a coax ial prob e do the following: NOTE! The HTHP coaxial probe must not be cut in field.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-18 Anchoring In turbulent tanks it may be necessary to fix the pr obe. Depending on the probe type dif ferent methods can be used to guide the pr obe to the tank bottom.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-19 Rosemount 3300 Series Coaxial probe. The Coaxial probe can be guided by a tube weld ed on the tank bottom. T ubes are customer supplied. Make sure that the probe can move freely in order to ha ndle therma l exp ansion.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-20 Mounting a Centering Disc for Pipe Inst allations Flexible Single/T win Lead probe Rigid Single Lead probe NOTE! Centering discs may not be used with PTFE covered probe s.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-21 Rosemount 3300 Series ELECTRICAL INST ALLATION Cable/conduit entries The electronics housing has two entries for ½ - 14 NP T . Optional M20×1.5 and PG 13.5 adapters are also ava ilable. The connections are made in accordance with local or plant electrical codes.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-22 Power Requirement s T erminals in the transmitter housing pr ovide con nection s for signal cables. The 3300 transmitter is loop-po wered and operates with power supplies ranging from 1 1 t o 42 VD C.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-23 Rosemount 3300 Series Connecting the T ransmitter The 3300 Series is a two-wire loop powered transmitter accepting power supplies ranging from 1 1 VDC to 42 VDC. It uses 4-20 mA power superimpos ed with a HART signal.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-24 Non-Intrinsically Safe Output For non-intrinsically safe installations, wire the transmitter as shown in Figure 3-15. NOTE! Make sure that the power supply is off when connecting the transmitter .
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-25 Rosemount 3300 Series Intrinsically Safe Outp ut For intrinsically safe installations wire the transmitter as shown in Figure 3-16.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-26 OPTIONAL DEVICES T ri-Loop The Model 3300 transmitter outputs a HAR T signal with four process variables. By using the Model 333 HAR T T ri-Loop up to three additional analog 4-20 mA output s are provided.
Reference Manual 00809-0100- 4811, Rev CA February 2006 3-27 Rosemount 3300 Series Using More than one transmitter on the bus The 3300 transmitter can be run in multidrop mode. In the multidrop mode each transmitter has a un ique HART address. Figure 3-18.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 3-28 751 Field Signal Indicator Figure 3-19. Wiring diagra m for 3300 transmitter with 75 1 Field Signal Indicator Figure 3-20. Alternative wiri ng diagram for 3 300 transmitter with 751 Field Signal Indicator Power supply WIRING_751.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 4 S t art-Up Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 4-1 Configuration Parameters . . . . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-2 CONFIGURATION PARAMETERS The Rosemount 3301 transmitter can be configured for level and volume measurement s. The Rosemount 3302 is designed to measure interface level and interface dist ance as well.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-3 Rosemount 3300 Series Reference Gauge Height The Reference Gauge Height is the dist an ce from the Upper Reference Point to the bottom of the tank.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-4 Upper Null Zone This par ameter should only be chang ed if there are measuremen t problems in the upper part o f the tank. Such pro blems may occ ur if there ar e disturbing objects close to the probe.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-5 Rosemount 3300 Series V olume Configuration For volume calculations you can choose o ne of the standard t ank shapes or the strapping option.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-6 St andard T ank Shapes Figure 4-4. S t andard tank shapes V ertical Cylinder V ertical Cylinder t ank s are sp ecified by Diameter and Height. Horizont al Cylinder Horizontal Cylinders are specified by Diameter and Height.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-7 Rosemount 3300 Series CONFIGURATION USING A 375 FIELD COMMUNICATOR This section describes ho w to configur e the 3300 transmitter by using a 3 75 Field Communicator . A 275 HART Communicator may also be us ed.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-8 Figure 4-6. HART Co mmunicator Menu T ree corresponding to Device Revision 2.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-9 Rosemount 3300 Series BASIC CONFIGURATION This section describes the var ious HART commands used to configu re the 3300 Series of transmitters for level measur ements. The tr ansmitter output s a 4 - 20 mA s ignal propo rtional to the primary variab le.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-10 Probe T ype The transmitter automatically makes an in itial calibration bas ed on the type of probe that is u sed. This parame ter is pr e-configure d at factory and only need s to be set if the probe is chang ed to anoth er type.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-1 1 Rosemount 3300 Series Measurement Mode Normally the Measurement Mode does not need to be changed. The transmitter is pre-configured a ccording to the specified model: Interface I mmersed Prob e is used for applications where the pr obe is fully immersed in liquid.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-12 4 and 20 mA Point s When setting the range values, it is possible to enter the values dir ectly using the keypad on the Field Communicator , or you may use actua l values (HART command [1, 3, 4, 2]).
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-13 Rosemount 3300 Series VO L U M E CONFIGURATION T ransmitter V ariables Select the V olume option in orde r to configure the transmitter for volume measurement s.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-14 CONFIGURATION USING THE RADAR CONFIGURATION T OOL The Radar Configuration T ool (RCT) is a user-friendly sof tware tool that allows you to configure the Rose mount 3300 transmitter .
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-15 Rosemount 3300 Series Figure 4-8. RHCS Server window 3. Check the COM port. 4. Choose the COM Port option that matches the COM Port connected to the transmitter . 5. If communication is intermittent, increase Busy Retries and Error Retries to 5 and 5 respectively .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-16 Using the Setup Wizard T o install a 3300 transmitter by using the installatio n Wizard do the following: Figure 4-9. RCT workspace Figure 4-10. RCT Wizard 1. S tar t the RCT software.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-17 Rosemount 3300 Series Using the Setup Function T o install a 3300 transmitter by using the Setup function do th e following: Figure 4-1 1.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-18 Setup - Info The Titl e tab shows information about the connecte d transmitter . Figure 4-1 3. Setup Title tab Device Name: designation of the curr ent transmitter model.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-19 Rosemount 3300 Series Setup - Output The Output t ab let s you assign up to four transmitter variables. Figure 4-15. Setup output tab T ypically , th e Primary V ariable (PV) is configured to be Product Level, Interface Level or V olume.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-20 Setup - T ank Config The T ank Configuration t ab contains information on ta nk geometry parameters and dielectrics.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-21 Rosemount 3300 Series Measurement Mode Normally the Measurement Mode does not need to be changed. The transmitter is pre-configured a ccording to the specified model: Interface I mmersed Prob e is used for applications where the pr obe is fully immersed in liquid.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-22 Measurement s Below Probe End The Present Level=0... check box controls how the level value is presented when the tank is almo st empty . By selecting this check box the Level is s et equal to zero as long as the pr oduct surface is below the probe.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-23 Rosemount 3300 Series Setup - LCD The LCD ta b lets you specify which para meters to appear on the display panel. The display has two rows, the upper row with five characters is for the measured value and the lower row with six characters for the value name.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-24 SPECIAL FUNCTIONS Tr i L o o p The Rosemount 333 HART T ri-Loop HAR T -to-Analog Signa l Converter is capable of co nverting a digital HAR T bu rst signal into three additional 4-20 mA analog signals.
Reference Manual 00809-0100- 4811, Rev CA February 2006 4-25 Rosemount 3300 Series 5. Set the 3300 in Burst mode. HART command [1 , 4, 5, 2, 3]. RCT : Device Commands>Details>Se t Burst Mode option. 6. Select Burst option 3=Process varia bles and current (Process vars/crnt).
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 4-26 T o turn off the Burs t Mode In order to turn of f the Burst Mode use one of the following option s: • The RCT prog.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 5 Operating the Display Panel Display Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 5-1 Error Messages . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 5-2 ERROR MESSAGES The display can also be used for presentation of sof tware errors. The upper row shows error codes and the low er row shows 'ERROR'. Figure 5-2.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Section 6 Service and T roubleshooting Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age 6-1 Advanced Configuration .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-2 ADVANCED CONFIGURATION This section covers non-st andard configuration. User defined Upper Reference Point If you want to specify your own Upper Reference Point you can do this by setting the Calibration Offset pa ra me te r .
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-3 Rosemount 3300 Series Plotting the Measurement Signal The Radar Configura tion T ool (RCT) has powerful tools for advanced troubleshooting. By using the W aveform Plot function you get an inst a nt view of the tank signal.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-4 Logging and saving to disk The W aveform plot can be automatically logged an d saved to file by specifying the read plot interval and the number of plot s to log. Figure 6-3.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-5 Rosemount 3300 Series Interface Measurement s for Semi-T ransparent Bottom Product s In interface applications where the bo tto m product ha.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-6 Figure 6-4 illustrates a s ituation where am plitude threshold T3 is too high. The signal amplitude peak at the interfac e between the upper and lower product s is not detected in this case.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-7 Rosemount 3300 Series High Level Rates The measurement signal is filtered in orde r to minimize the influence of disturbing noise. In most measur ement situations this does not have a noticeable ef fect on the response time to level changes.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-8 Interface Measurement s with Fully Immersed Probes The 3300 series has a measurement option wh ich makes it possible to handle interface measurement s when the product level is not visible, for examp le in a full bridle pipe as illustrated in Figure 6- 6.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-9 Rosemount 3300 Series SERVICE Analog Output Calibration T o calibrate the An alog Output curren t do the following: 1. S tar t RCT and make sure that the transmitter communicates with the PC (see Section 4 : Installing the RCT software).
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-10 Level and Dist ance Calibration When calibrating the tran smit ter it is important that t he product surface is calm and that the tank is not being filled or emptied. A complete calibration is per formed in two steps: 1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-1 1 Rosemount 3300 Series Disturbances at the T op of the T ank Using the T rim Near Zo ne Function For transmitters using the Guided W ave Ra dar technology the performance In the Near Zone ( referred to as the regi on between 0-1.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-12 T o set the Upper Null Zone do one of the following: 1. Select the HART command [1 , 3, 3, 1]. 2. Enter the desired value, or 1. S tar t the Radar Configuration T ool (RCT).
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-13 Rosemount 3300 Series Amplitude Threshold Settings The amplitude thresholds are automatically adjusted to appropriate values in order to filter out noise and other non-valid measurement s from the measurement signal.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-14 By adjusting the am plit ud e thresh old T2 the product surface is detected correctly as illustrated in Figure 6-12. Figure 6-12. W aveform plot after threshold T2 was adjuste d T o adjust the amplitude thresholds select HAR T command [1, 4, 5, 3] or 1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-15 Rosemount 3300 Series Using the 375 Field Communic ator T o adjust amplitude threshold value: 1. Select HART comm and [1, 4, 5, 3]. The dif ferent amplitude thresholds appear on the di splay .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-16 Logging Measurement Dat a T o start logging do the following: 1. Click the Monitor icon in the RCT workspace or choose the Monitor option from the View menu. 2. Choose the desired vari ables to be monitored and click the S tart Monitor button.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-17 Rosemount 3300 Series Saving the T ransmitter Configuration The Radar Configuration T ool of fers diff erent methods to save the current transmitter configuration: • Save only the configuration specified in the Setup window .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-18 T o load a setup 1. Click the Setup icon in the RCT works pace or choose the Setup option from the File menu. 2. In the Setup window click the right mouse button and ch oose the Open Setup option, or from the File menu choose the Open Setup op tion.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-19 Rosemount 3300 Series Removing the T ransmitter Head 1. Loosen the nut that connect s the transmitter housing to the Process Se al.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-20 Changing the Probe 1. Loosen the nut. 2. Remove the transm itter head from the old probe. 3. On the new probe, ma ke sure that th e protection plug is removed and the upper surface of the Process Seal is clean.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-21 Rosemount 3300 Series DIAGNOSTIC MESSAGES T roubleshooting If ther e is a ma lfu nction de spit e th e ab se nc e of dia g no stic messages, see T able 6-1 for information on possible causes.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-22 Errors T able 6-2 is a list of diagno stic messages that may be displayed on the Integral Display , on the 375 Fi eld Communicator , in AMS Su ite or by the Radar Configuration T ools (R CT ) software.
Reference Manual 00809-0100- 4811, Rev CA February 2006 6-23 Rosemount 3300 Series W arnings T able 6-3 is a list of diagnost ic messages th at may be di splayed on th e Integral Display , on the Mode l 375 Field Communicato r or by the Radar Configuration T ools (RCT) software.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series 6-24.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Appendix A Reference Dat a Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age A-1 Dimensional drawings . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-2 Mechanical Probes Coaxial: 1.3 ft (0.4 m) to 19.7 ft (6 m). Rigid T win Lead: 1.3 ft (0.4 m) to 9.8 ft (3 m). Flexible T win Lead: 3.3 ft (1 m) to 77.1 ft (23.5 m). Rigid Single Lead: 1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-3 Rosemount 3300 Series Measuring Performance Reference accuracy ± 0.2 inch (5 mm) for probes ≤ 16 .4 ft (5 m). ± 0.1% of measured distance for probes >16.4 ft (5 m). Repeatability ± 0.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-4 Process T emperature and Pressure Rating The tank connection consist s of ta nk seal and a flange (EN, ANSI, Fisher or Masoneilan) or NPT or BSP/G threads (1 or 1.5 in .
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-5 Rosemount 3300 Series The HP and HTHP versions have a cerami c t ank seal, and gra phite gasket s - no O-rings are u sed. The dif ference between the HP and HTHP versions is spacer materi al; PF A for HP , and ceramics for HTHP .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-6 Ambient T emperature When the Rosemount 3300 is inst alled in high temperature applications, it is important that th e maximum ambient temperature is considered. T ank insulation should not exceed 4 inches (10 cm).
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-7 Rosemount 3300 Series DIMENSIONAL DRAWINGS Figure A-5. Rigid T win Lead Dimensions are in inches (m illimeter). 4.1 (104) s60 1.0 (25) Ø 0.24 (6) Ø 0.31 (8) RIGID_TWIN_LEAD.EPS 6.8 (173) 4.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-8 Figure A-6. Flexible T win Lead Dimensions are in inches (m illimeter). 1.4 (35) s60 3.5 (90) 3.5 (90) Ø 0.16 (4) Ø 0.16 (4) 1.4 (35) FLEX-TWIN- LEAD.EPS 4.1 (104) 4.5 (1 13) 1.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-9 Rosemount 3300 Series Figure A-7. Coaxial Dimensions are in inches (m illimeter). L ≤ 20 feet (6 m) 1.1 (28) COAXIAL.EPS s52/s60 G 1/1½ inch L ≤ 20 feet (6 m) 1.1 (28) NPT 1/1½ inch 9.5 (241) 4.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-10 Figure A-8. Flexible Single L ead Dimensions are in inches (m illimeter). 0.9 (22) ½ - 14 NPT Optional adapters: M20x1.5 PG13.5 Ø 0.16 (4)/ Ø 0.28 (7) PTFE covered probe s52/s60 G 1/1½ inch s52 NPT 1/1½ inch 0.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-1 1 Rosemount 3300 Series Figure A-9. Rigid Single Lead Dimensions are in inches (m illimeter). 4.1 (104) Ø 0.32 (8) Ø 0.47 (12) for the PTFE covered probe 6.8 (173) s52 4.3 (1 10) 4.5 (1 13) 1.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-12 ORDERING INFORMATION Model Code 3301, Level in Liquids Model Product Description 3301 Guided W ave Radar Level Transm.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-13 Rosemount 3300 Series Code Process Connection - Size / T ype (consult factory for ot her process connections) ANSI Flanges in 316L SST (A S.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-14 Code Hazardous Locations Certifications NA No H azardous Locations Certifications E1 A TEX Flameproof E5 FM Explosion.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-15 Rosemount 3300 Series Model Code 3302, Level and Interf ace in Liquids Model Product Description 3302 Guided W ave Radar Level and Interfac.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-16 Code Process Connection - Size / T ype (consult factory for ot her process connections) ANSI Flanges in 316L SST (A S.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-17 Rosemount 3300 Series Code Hazardous Locations Certificat ions NA No Hazardous Locations Certifications E1 A TEX Flameproof E5 FM Explosion.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-18 SP ARE PART S Sp are p art s list T ransmitter hea d Model 3301/3302 Model Product Description 3301 Tr ansmitter head.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-19 Rosemount 3300 Series Code Options M1 Integral Digital Display BT Bar Code T ag T0 T erminal block without transient protection Cx - Specia.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-20 Sp are p art s list Probe Model 3301 /3302 Model Product D escription 3309 S pare probe Code Signal Output N Not appl.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-21 Rosemount 3300 Series Code Process Connection - Size/T ype (consult factory fo r other process connections) ANSI Flanges in ASME A182 Gr.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-22 Code Hazardous Locations Certifications NA Not applicable Code Options P1 Hydrosta tic testing N2 NACE material recommendation per MR 01-75 (1) LS Long S tud 9.8 in. (250 mm) for Flexible Single Lead probe.
Reference Manual 00809-0100- 4811, Rev CA February 2006 A-23 Rosemount 3300 Series Sp are part s list Ot her Sp ares and A ccessories M odel 3301/33 02 Code Process Connection - Size/T ype (consult fa.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series A-24.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Appendix B Product Certifications Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p age B-1 EU Conformity . . . . . . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-2 EU CONFORMITY The EC declaration of conformity for all applicable European directives fo r this product can be found on the Rosemount website at www .rosemount.com. A hard copy may be ob tained by cont acting our local sales represent ative.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-3 Rosemount 3300 Series EUROPEAN A TEX DIRECTIVE INFORMATION Intrinsic Safety The Rosemount 3300 Series Guided W ave Radar Level and Interface.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-4 Flameproof The Rosemount 3300 Series Guid ed Wave Radar Level and Interface T ransmitter that has the following labe l.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-5 Rosemount 3300 Series HAZARDOUS LOCATIONS CERTIFICATIONS The Rosemount 3300 Series Guid ed Wave Radar Level and Interface T ransmitters that have the following labe ls att ached have been certified to comply with the requirement s of the approval agencies noted.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-6 Canadian St andards Association (CSA) Approval Cert. no. 2002.1250250 . Figure B-4. Approval Lab el Canadian S t andards Association (CSA) E6 Explosion-Proof for Class I, Division 1, Group s C and D.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-7 Rosemount 3300 Series IECEx Approval Figure B-5. Approval Lab els IECEx. E7 Flameproof: Ex d [ia] IIC T6 (T amb = +60 °C). IECEx TSA 04.0013X. Conditions of Certification The apparatus metallic enclosure must be electric ally bonded to earth.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-8 COMBINATION OF APPROVALS Figure B-6. Approval Lab el A TEX Flame-Proof an d Canadian S t andards Association (CSA) Explosion-Proof. Figure B-7. Approval Lab el CSA Explosion-Pr oo f an d FM Explosion-Proof.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-9 Rosemount 3300 Series Figure B-8. Approval Lab el A TEX Flame-Proof an d FM Explosion-Proof. Figure B-9. Approval Lab el A TEX Intrinsic Safety and CSA Intrinsic Safety . A TEX_FM_E1_E5.TI F A TEX_CSA_ I1_I6.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-10 Figure B-10. Approval Label FM Intrinsic Safety and CSA Intrinsic Safety . Figure B-1 1. Approval Label A TEX Intrinsic Safety and FM Intrinsic Safety . FM_CSA_I5_I6.TIF A TEX_FM_ I1_I5.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-1 1 Rosemount 3300 Series APPROVAL DRAWINGS This section cont ains Factory Mutual installation drawing s and Canadian S tan da rds installation drawings. Y ou mu st follow the insta llation guidelines presented in order to maint ain certified ratings for inst alled transmitters.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-12 Figure B-12. System Control Drawing for hazardous loca tion installation of intrin sically safe FM approved apparatus. FM Approved Product No revisions to this drawing without prior Factory Mutual Approval.
Reference Manual 00809-0100- 4811, Rev CA February 2006 B-13 Rosemount 3300 Series Figure B-13. System Control Drawing for hazardous location inst allation of CSA approved apparatus.
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series B-14 Figure B-14. System Control Drawing for hazardo us location installation of IECEx approve d apparatus.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series www .rosemount.com Index Numerics 20 mA point . . . . . . . . . 4-4 , 4-19 275 HART Communica tor . . . . 4-7 375 Field Communica tor . . . . . 4-7 4 and 20 mA Poin ts . . .
Reference Manual 00809-0100-48 11, Rev CA February 2006 Rosemount 3300 Series Index-2 M Maximum load resistance 3-24 , 3-25 Maximum Upper Product Thickness 4-1 1 Measurement Mode . . 4-1 1 , 4-21 Measurement Principle . . . . . . 2-1 Measurement Units .
.
Reference Manual 00809-0100-4 811, Rev CA February 2006 Rosemount 3300 Series Emerson Process Management © 2006 Rosemount Inc. All rights reserved. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of one of t he Emerson Process Management group of companies.
Een belangrijk punt na aankoop van elk apparaat Emerson 3300 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Emerson 3300 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Emerson 3300 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Emerson 3300 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Emerson 3300 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Emerson 3300 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Emerson 3300 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Emerson 3300 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.