Gebruiksaanwijzing /service van het product S4 Plus van de fabrikant Alesis
Ga naar pagina of 156
A L ES I S S4 Plus Reference M a nu a l.
S4 Plus Reference Manual 1 Introduction Thank you for purchasing the Alesis S4 Plus 64 Voice Sound Module. To take full advantage of the S4 Plus’s functions, and to enjoy long and trouble-free use, please read this user’s manual carefully.
.
Index S4 Plus Reference Manual 3 C ONTENTS 1: Setting Up ................................ ................................................................ ...... 7 Unpacking and Inspection ................................ .............................
Index 4 S4 Plus Reference Manual Storing ................................ ................................ ................................ ............................ 32 Store a Program ................................ ..............................
Index S4 Plus Reference Manual 5 Amp Envelope ................................ ................................ ................................ ... 82 Copying Sounds ................................ ................................ ..................
Index 6 S4 Plus Reference Manual Channel Messages: Mode Messages ................................ ............................... 126 Channel Messages: Voice Messages ................................ ............................... 126 System Common Messages .
Setting Up: Chapter 1 S4 Plus Reference Manual 7 C HAPTER 1 S ETTING U P Unpacking and Inspection Your S4 Plus was packed carefully at the factory. The shipping carton was designed to protect the unit during shipping. Please retain this container in the highly unlikely event that you need to return the S4 Plus for servicing.
Chapter 1: Setting Up 8 S4 Plus Reference Manual Line Conditioners and Protectors Although the S4 Plus is designed to tolerate typical voltage variations, in today’s world the voltage coming from the AC line may contain spikes or transients that can possibly stress your gear and, over time, cause a failure.
Setting Up: Chapter 1 S4 Plus Reference Manual 9 About Audio Cables The connections between the S4 Plus and your studio are your music’s lifeline, so use only high quality cables. These should be low-capacitance shielded cables with a stranded (not solid) internal conductor and a low-resistance shield.
Chapter 1: Setting Up 10 S4 Plus Reference Manual A Word About Sound Bridge Included with the S4 Plus is a 3-1/2" floppy disk containing a software program called Sound Bridge. This software has been provided free of charge in an effort to promote sound design for the S4 Plus.
Your First Session With The S4 Plus: Chapter 2 S4 Plus Reference Manual 11 C HAPTER 2 Y OUR F IRST S ESSION W ITH T HE S4 P LUS Powering Up After making your connections, turn on the system’s power .
Chapter 2: Your First Session With The S4 Plus 12 S4 Plus Reference Manual Playing the Demo Sequence The S4 Plus has a built-in demo sequence which demonstrates the wide variety of sounds this amazing instrument is capable of generating.
Your First Session With The S4 Plus: Chapter 2 S4 Plus Reference Manual 13 Playing the S4 Plus The S4 Plus is shipped from the factory with 5 Banks of 128 Preset Programs (sounds) each. Additionally, there are 100 Mixes in each of the 5 Banks. Program Mode and Mix Mode The S4 Plus is always in one of two modes: Program Mode or Mix Mode .
Chapter 2: Your First Session With The S4 Plus 14 S4 Plus Reference Manual Auditioning Internal Programs ¿ Press the [PROGRAM] button to select Program Play Mode. You can now play the S4 Plus keyboard; the Program will be whatever was selected when last in Program mode (Program number 00 – 127).
Your First Session With The S4 Plus: Chapter 2 S4 Plus Reference Manual 15 Realtime Performance Functions The S4 Plus provides various ways to control the sound as you are playing. Try out some of these functions while playing your MIDI keyboard. The sound of the effects can also change by using these controllers.
Chapter 2: Your First Session With The S4 Plus 16 S4 Plus Reference Manual Knob [1], you adjust the setting of the first parameter on the left. Turning Quad Knob [2] adjusts the next parameter, and so on.
Your First Session With The S4 Plus: Chapter 2 S4 Plus Reference Manual 17 Editing a Mix In this section, we will assign Programs to and set volume levels for the 16 MIDI channels in a Mix, for playing back tracks from a MIDI sequencer. However, there is much more about a Mix that may be edited.
Chapter 2: Your First Session With The S4 Plus 18 S4 Plus Reference Manual Setting the Effects Level Each Program can use up to four Sounds, for either layering or splitting the keyboard. Each of these Sounds has its own effects send level and effects bus assignment.
Connections: Chapter 3 S4 Plus Reference Manual 19 C HAPTER 3 C ONNECTIONS Basic MIDI Hookup MIDI is an internationally-accepted protocol that allows musical-related data to be conveyed from one device to another. See the MIDI Supplement in Appendix B if you are not familiar with how MIDI works.
Chapter 3: Connections 20 S4 Plus Reference Manual Using the S4 in Live Performance Depending on the capabilities of your MIDI controller keyboard, you have two different options available for how the.
Connections: Chapter 3 S4 Plus Reference Manual 21 Using an External Sequencer The MIDI keyboard or controller (such as the QuadraSynth Plus) can generate MIDI signals that are recorded by a sequencer. On playback, the sequencer sends this data back into the S4 Plus, which then serves as a multitimbral sound module (in Mix Mode).
Chapter 3: Connections 22 S4 Plus Reference Manual Digital Audio/Optical Hookup The S4 Plus can send digital audio directly into ADAT , which provides better fidelity than using the analog inputs and outputs. The digital I/O connector follows a proprietary Alesis format that carries all four audio outputs on a single fiber optic cable.
Overview: Chapter 4 S4 Plus Reference Manual 23 C HAPTER 4 O VERVIEW Basic Architecture The S4 Plus contains digitized acoustic and electronic voices , organized into 18 groups of sound types.
Chapter 4: Overview 24 S4 Plus Reference Manual Modes The S4 Plus is always in one of two main modes: Program Mode or Mix Mode. Pressing [PROGRAM] selects Program Play Mode, while pressing [MIX] selects Mix Play Mode. While in Program Play Mode, you can press [SELECT] to access Program Edit Mode and Effects Edit Mode.
Overview: Chapter 4 S4 Plus Reference Manual 25 • select which Programs will be played by the different MIDI channels and by the keyboard in multiple layers or splits; • set the output level, effects level, and pan of each Program in the Mix; • select which Program’s Effects Patch will be used by the Mix.
Chapter 4: Overview 26 S4 Plus Reference Manual The User Interface: Display, Functions, Pages, and Parameters The key to the S4 Plus user interface is the combination of the Display and four Q uad Knobs/Buttons [1] – [4] located toward the right of the front panel.
Overview: Chapter 4 S4 Plus Reference Manual 27 • Name strip. When in Mix Play Mode, the name of the currently selected Mix will appear here. Likewise, when in Program Play Mode, the name of the currently selected Program will appear here.
Chapter 4: Overview 28 S4 Plus Reference Manual Parameter Editing All parameter editing involves the same general procedure, with minor variations: ¿ Select the type of parameters you want to edit with the corresponding button: [ M IX ], [PROGRAM], or [ GLOBAL].
Overview: Chapter 4 S4 Plus Reference Manual 29 Editing Program Parameters Here is an example of how to use the S4 Plus’s editing features to change Program parameters. Feel free to make changes and twist dials; these will not be made permanent unless you store the Program (described later).
Chapter 4: Overview 30 S4 Plus Reference Manual Edit 4 and Edit 1 Modes A Program is made up of four sounds. Sometimes, you need to edit four variables of a single Program sound (for example, the attack/decay/sustain/release parameters of an envelope).
Overview: Chapter 4 S4 Plus Reference Manual 31 Comparing Edited and Stored Versions When you edit a Program or Mix, you are actually editing a copy which is in a temporary edit buffer. Therefore, to retain the results of your edit, you must save it to a particular memory location (see the next section on Storing).
Chapter 4: Overview 32 S4 Plus Reference Manual Storing The [ STORE] button selects Store mode. Store mode has 6 pages which you can scroll through by using the PAGE [¨] and [Æ] buttons. Each page in Store mode provides a different type of storage, copy or data transfer function.
Overview: Chapter 4 S4 Plus Reference Manual 33 Copying Effects Between Programs Follow the steps below to copy the Effects from one Program to another Program in the User Bank. ¿ Press [PROGRAM] to select Program Play Mode. ¡ Use the VALUE [¨] and [Æ] buttons to select the Program Number that uses the Effects you want to copy.
Chapter 4: Overview 34 S4 Plus Reference Manual To Audition Programs Before Storing To look for available memory locations to permanently store your Program to, you can move between Program Mode and Mix Mode without losing your changes.
Overview: Chapter 4 S4 Plus Reference Manual 35 To audition Programs before overwriting them with STORE …when editing a Program in Mix Edit Mode: ¿ While in Mix Program Edit mode, press [PROGRAM]. This selects Program Play Mode, retaining your edits to the Program in Mix Edit.
Chapter 4: Overview 36 S4 Plus Reference Manual.
Editing Mixes: Chapter 5 S4 Plus Reference Manual 37 C HAPTER 5 E DITING M IXES What is a Mix? Mix Mode is one of the most powerful features of the S4 Plus.
Chapter 5: Editing Mixes 38 S4 Plus Reference Manual using the FUNCTION [¨] and [Æ] buttons and (if necessary) the PAGE [¨] and [Æ] buttons. A Mix also uses the Effect Patch associated with one of its 16 Programs. Here is a simplified diagram of the signal path in Mix mode.
Editing Mixes: Chapter 5 S4 Plus Reference Manual 39 Program Assign for each MIDI Channel The first function of Mix Edit is Program Assign. Program Bank (User, Preset 1–4, Card) This determines which Bank the selected Program is located in for the selected MIDI channel.
Chapter 5: Editing Mixes 40 S4 Plus Reference Manual Pitch The Pitch function lets you transpose a channel’s Program in either semitone or octave increments.
Editing Mixes: Chapter 5 S4 Plus Reference Manual 41 Range (Page 2) MIDI In (On or Off) This determines whether or not the selected channel will respond to incoming MIDI messages. MIDI Out (On or Off) In the QuadraSynth Plus Piano, this determines whether or not the selected channel will transmit MIDI messages.
Chapter 5: Editing Mixes 42 S4 Plus Reference Manual Effects in Mix Play Mode In Mix Play Mode, you can have only one Effect Patch active per Mix, which will be the Effects Patch associated with one of the Programs used in the Mix.
Editing Mixes: Chapter 5 S4 Plus Reference Manual 43 indicates that, although the Effects Patch number coincides with the Program number on the Effects Channel, the Mix is still using the Effects Program connected to the original Program on the Effects Channel that is stored in the Mix.
Chapter 5: Editing Mixes 44 S4 Plus Reference Manual Playing a Group of Channels in a Mix In Program Play Mode, you can use the MIDI [¨] and [Æ] buttons to set the MIDI IN channel for the whole instrument.
Editing Programs: Chapter 6 S4 Plus Reference Manual 45 C HAPTER 6 E DITING P ROGRAMS Overview Synthesizer programming is the art and science of shaping sounds in a particular way by altering the parameters of various modules. Like music itself, learning synth programming is an ongoing process.
Chapter 6: Editing Programs 46 S4 Plus Reference Manual interface maintains the metaphor of “modules,” in fact all sounds are simply a set of numbers reflecting how you’ve programmed the various sound parameters.
Editing Programs: Chapter 6 S4 Plus Reference Manual 47 • When you want different sounds to respond to different MIDI channels. S4 Plus Signal Flow The Four Sounds of a Program Each Program is made up of at least one to four sounds.
Chapter 6: Editing Programs 48 S4 Plus Reference Manual Voice This digitally-based oscillator provides the actual raw sounds from the 24 megabyte library of on-board samples.
Editing Programs: Chapter 6 S4 Plus Reference Manual 49 Each voice/filter combination is followed by an amplifier whose level can be controlled by a variety of modulation sources. This allows for creating sounds with percussive or slow attacks, particular types of decays, tremolo, etc.
Chapter 6: Editing Programs 50 S4 Plus Reference Manual LFO (Low Frequency Oscillator) The pitch, filter, and amp modules each have a dedicated LFO module for modulation.
Editing Programs: Chapter 6 S4 Plus Reference Manual 51 one of the four effect buses. Effects settings, Effect Level and Bus information is saved with the Program when you store it back into memory. Drum Mode Any one or all of the four sounds in a Program can be put in Drum Mode.
Chapter 6: Editing Programs 52 S4 Plus Reference Manual When Drum Mode is enabled, the sound will have fewer parameters for editing. Consequently, not all Function labels will appear in the LCD display as when Drum Mode is turned off. Specifically, the LFOs and all Envelopes (with the exception of the Amp Envelope) are unavailable.
Editing Programs: Chapter 6 S4 Plus Reference Manual 53 Organ FullDrwbar, 3 Drawbars, Jazz Tone, Percus 2nd, Percus 3rd, Mellow, DrtyChurch, 60’s Combo Keybrd Clavinet, FMClav Hrd, FMClav Sft, FMCla.
Chapter 6: Editing Programs 54 S4 Plus Reference Manual Level Each sound in a program can have its own level, pan position, and output assignment. With up to four sounds per program, this allows for a wide variety of stereo effects and level balances between the sounds.
Editing Programs: Chapter 6 S4 Plus Reference Manual 55 Detune Type (Normal or Equal) With Normal selected, the percentage of detuning remains the same over the entire range of the keyboard, so the effects of detuning sound the same no matter which key you play.
Chapter 6: Editing Programs 56 S4 Plus Reference Manual Portamento (Exponential, Linear, 1 Speed) This provides the sweep’s “curve.” • With an exponential curve, the pitch change seems to happen more rapidly at first, then slows down as it approaches the ending pitch.
Editing Programs: Chapter 6 S4 Plus Reference Manual 57 Filter Filter (Page 1) Frequency (00 to 99) This sets the filter's initial cutoff frequency. Lower values give a duller sound since this removes more harmonics; higher values let through more harmonics, which gives a brighter sound.
Chapter 6: Editing Programs 58 S4 Plus Reference Manual Filter (Page 2) Modulation Wheel Depth (-99 to +99) Determines how moving the modulation wheel affects the filter cutoff frequency. Example: With positive settings, moving the modulation wheel up raises the filter cutoff frequency and moving it down lowers the filter cutoff frequency.
Editing Programs: Chapter 6 S4 Plus Reference Manual 59 Amp Velocity Curve (13 choices) This selects how the sound will respond to the dynamics of your playing the keyboard. A LINEAR curve is the norm, whereby the increase in level is equal to the increase in velocity; the velocity values increase as you play harder.
Chapter 6: Editing Programs 60 S4 Plus Reference Manual At +00, the Amp LFO has no effect. Higher positive values increase the amount of LFO modulation.
Editing Programs: Chapter 6 S4 Plus Reference Manual 61 Sound Overlap (00 to 99) This determines how many voices can overlap on the same pitch. Example: If you hold the sustain pedal down and play the.
Chapter 6: Editing Programs 62 S4 Plus Reference Manual Mod About General Purpose Modulation Although there are several dedicated modulators in the S4 Plus (e.
Editing Programs: Chapter 6 S4 Plus Reference Manual 63 • Aftertouch Pressing on the keys after they’re down generates this control signal. Aftertouch is also called channel pressure, and represents an average of all keys being pressed. This affects any keys that are held down.
Chapter 6: Editing Programs 64 S4 Plus Reference Manual • Controllers (A, B, C, D) Four incoming MIDI controllers can be recognized by the S4 Plus and used as modulation sources. These controllers are assigned as A–D in Global Mode (see Chapter 8).
Editing Programs: Chapter 6 S4 Plus Reference Manual 65 Pitch LFO Pitch LFO (Page 1) The Pitch LFO is most often used to apply vibrato to a sound. J The following Pitch LFO variables will make a diffe.
Chapter 6: Editing Programs 66 S4 Plus Reference Manual and at the same speed. Because of this, modulating the LFO Speed using a voice - specific source (such as velocity or one of the envelopes, for example) will have no effect (you will be allowed to do this, but you won’t hear any difference).
Editing Programs: Chapter 6 S4 Plus Reference Manual 67 Filter LFO Filter LFO (Page 1) The Filter LFO is most often used to apply tremolo-like or "wah-wah" effects to a sound.
Chapter 6: Editing Programs 68 S4 Plus Reference Manual Mod Wheel (-99 to 99) This parameter sets how much the Mod Wheel will increase or decrease the Filter LFO’s Level. A positive value raises the level when the Mod Wheel is moved up, and lowers the level when moved down.
Editing Programs: Chapter 6 S4 Plus Reference Manual 69 Amp LFO (Page 2) Level (00 to 99) This is the base output level of the Amp LFO. If you want to have a constant value of tremolo, even without using the Mod Wheel or Aftertouch, set LEVEL above 00.
Chapter 6: Editing Programs 70 S4 Plus Reference Manual Decay & Sustain (00 to 99) As soon as the attack portion of the envelope finishes (when the level reaches maximum), the envelope will decay (decrease in level). The level it reaches is set by the Sustain control; how long it takes to get there is set by the Decay control.
Editing Programs: Chapter 6 S4 Plus Reference Manual 71 which triggered the envelope’s cycle, playing another note in the middle would not interrupt the cycle). Also in Normal mode, the envelope will immediately advance to its release stage upon releasing the note.
Chapter 6: Editing Programs 72 S4 Plus Reference Manual Velocity Modulation (00 to 99) This determines how keyboard dynamics will affect the envelope level. When set to 99, note velocity controls the envelope’s output; notes played hard will deliver a higher envelope output than notes played soft.
Editing Programs: Chapter 6 S4 Plus Reference Manual 73 Filter Envelope (Page 2) Delay (00 to 99) This is the amount of time that the envelope will wait before doing anything; very useful if you want to affect one element of a sound sometime after the sound starts.
Chapter 6: Editing Programs 74 S4 Plus Reference Manual Sustain Pedal (On or Off) This determines whether or not the Sustain Pedal will have an effect on the envelope.
Editing Programs: Chapter 6 S4 Plus Reference Manual 75 level until you release the note on the keyboard, or decay to 0 at the Sustain Decay rate (which is on page 2 of the envelope). You can create a long "plateau" at the start of a note by setting the Sustain to 98 and the Decay to 99.
Chapter 6: Editing Programs 76 S4 Plus Reference Manual Time Tracking (On or Off) This determines whether or not keyboard position will affect the cycle speed of the envelope.
Editing Programs: Chapter 6 S4 Plus Reference Manual 77 Tracking Generator The Tracking Generator is used to scale a modulation source. For example, normally you could modulate the Amp (volume) of a sound using velocity; the harder you play, the louder the sound gets.
Chapter 6: Editing Programs 78 S4 Plus Reference Manual generator. You can patch the Mod Wheel somewhere else in addition to the Tracking Generator, giving you gradual control of one function with the full range of the Mod Wheel, while switching on a second function only at the top of the wheel.
Editing Programs: Chapter 6 S4 Plus Reference Manual 79 Misc. Drum Mode This enables and disables Drum Mode which allows you to assign individual drum sounds to individual keys. To Program a sound in Drum Mode, refer to the next section “Programming Drum Sounds.
Chapter 6: Editing Programs 80 S4 Plus Reference Manual Programming Drum Sounds To program a sound in Drum Mode, you must first enable Drum Mode for that particular sound in the Misc.
Editing Programs: Chapter 6 S4 Plus Reference Manual 81 To send a drum to an individual output, use Output in conjunction with Pan. Example: Panning a drum full left and selecting the Aux outputs means that the drum will appear at only the left Aux output.
Chapter 6: Editing Programs 82 S4 Plus Reference Manual Note (000 to 127/C-2 to G8) Each drum can be assigned to a single note which will trigger the drum sound when played. Quad Knob [1] specifies the note assignment of the selected drum (000 to 127/C-2 to G8).
Editing Programs: Chapter 6 S4 Plus Reference Manual 83 Copying Sounds While editing a Program, it is helpful to be able to copy a sound to another sound in either the same Program or a different Program, especially if you are building a split or layered Program.
Chapter 6: Editing Programs 84 S4 Plus Reference Manual To re-initialize the S4 Plus: ¿ Press [PROGRAM] to enter Program mode. ¡ Turn the unit off. ¬ While holding down both Quad Buttons [1] and [4], turn on the power. The S4 Plus will come on showing Program 00, with the EDITED flag showing in the display.
Editing Effects: Chapter 7 S4 Plus Reference Manual 85 C HAPTER 7 E DITING E FFECTS About Signal Processing The built-in effects processor of the S4 Plus is similar to that of the Alesis QuadraVerb 2, capable of generating multiple, fully digital effects simultaneously.
Chapter 7: Editing Effects 86 S4 Plus Reference Manual Selecting Effects in Mix Mode Each Program has its own effects that are recalled when you select a Program. However, since a Mix can have up to 16 Programs (one on each Channel), you must select which Channel’s Program you wish to use the effects from.
Editing Effects: Chapter 7 S4 Plus Reference Manual 87 Clip While routing sounds into the effects processor, the word “CLIP” will temporarily appear in the display if an input is overloading the effects.
Chapter 7: Editing Effects 88 S4 Plus Reference Manual Storing Effect Patches In Program Mode Effects are an extension of a Program. So, when you store a Program, you store its Effects Patch along with it.
Editing Effects: Chapter 7 S4 Plus Reference Manual 89 Copying Effect Patches When you want a Program to use the Effects from a different Program, you must copy that other Program’s Effects into the Program you are working on. This is done within Store Mode using the “Copy Effect” function.
Chapter 7: Editing Effects 90 S4 Plus Reference Manual Configuration #1: 4-Sends, 1 Reverb PITCH 1 FX SEND 1 FX SEND 2 AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT DELAY 1 1 REVERB FX SEND 3 FX SEND 4 PITCH 2 DELAY 2 AMP AMP PITCH 3 DELAY 3 AMP DELAY 4 AMP 1 2 1 2 1 2 1 2 BAL.
Editing Effects: Chapter 7 S4 Plus Reference Manual 91 This Configuration #1 provides three Pitch effects, four Delay effects and one Reverb effect. The Pitch effects are found on effect sends 1, 2 an.
Chapter 7: Editing Effects 92 S4 Plus Reference Manual Configuration #2: 4-Sends, 2 Reverb FX SEND 1 FX SEND 2 AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT DELAY REV.
Editing Effects: Chapter 7 S4 Plus Reference Manual 93 Configuration #3: 4-Sends, 1 Lezlie LEZLIE FX SEND 1 FX SEND 2 A UX LEFT A UX RIGHT MAIN LEFT MAIN RIGHT A UX LEFT A UX RIGHT MAIN LEFT MAIN RIGHT DELA Y 1 1 REVERB FX SEND 3 FX SEND 4 PITCH 2 DELA Y 2 AMP AMP PITCH 3 DELA Y 3 AMP DELA Y 4 AMP 1 2 1 2 1 2 1 2 BAL.
Chapter 7: Editing Effects 94 S4 Plus Reference Manual Configuration #4: 2-Sends, with EQ AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT 12 PITCH 1 BAL. FX SEND 1 PITCH 2 BAL. FX SEND 2 PITCH 1 12 DELAY 1 DELAY 2 BAL. 1 2 BAL.
Editing Effects: Chapter 7 S4 Plus Reference Manual 95 Configuration #5: OD>CHS>DDL>REV>LZ AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT AUX LEFT AUX RIGHT MAIN LEFT MAIN RIGHT 1 BAL. FX SEND 1 MISC. 1 1 PITCH 1 REVERB 1 MIX OVERDRIVE FX SEND 2 FX SEND 3 FX SEND 4 PITCH 1 BAL.
Chapter 7: Editing Effects 96 S4 Plus Reference Manual Reverb Reverb can be thought of as a great number of distinct echoes, called reflections, that occur so fast that our ear hears them blurred together as one.
Editing Effects: Chapter 7 S4 Plus Reference Manual 97 Input level Quad Knob [4] controls the overall Input Level going into the Reverb. Chorus Input Level If Configuration #2 is selected (refer to bl.
Chapter 7: Editing Effects 98 S4 Plus Reference Manual If Configuration #2 is selected and you press [EDIT 1] to advance to effect send 2 while the Reverb function is selected, the display will look like this: MIDI CHAN PROG 1 PRESET EDITING: 2 EFFECT PITCH MOD CONFIG REVERB DELA Y MIX MISC.
Editing Effects: Chapter 7 S4 Plus Reference Manual 99 Gated. Gated Reverb is a very popular effect on drums first found on English records in the early 1980s.
Chapter 7: Editing Effects 100 S4 Plus Reference Manual Reverb (Page 4) Density Density controls how the first reflection of the reverb effect will appear. When set to 0, the first reflection is heard alone without any other reflections. When set to 99, the first reflection appears to “fade-in” and then “fade-out”.
Editing Effects: Chapter 7 S4 Plus Reference Manual 101 Delay The Delay function is used to edit Delay parameters. Delay (Page 1) The S4 Plus’s effects processor has three different Delay types available. Note: Some delay modules only feature a mono Delay, and therefore the Delay Type parameter will be unavailable.
Chapter 7: Editing Effects 102 S4 Plus Reference Manual Pitch The Pitch function is used to edit Pitch parameters. Pitch (Page 1) The first page of the Pitch function will look different depending on the selected Configuration and which effect send you are editing.
Editing Effects: Chapter 7 S4 Plus Reference Manual 103 Stereo Chorus. In the case of a Stereo Chorus, the signal is split into three parts with a dry signal and a separate Detuning section for both left and right channels. When the left channel is detuned sharp, the right is detuned flat, and vice versa.
Chapter 7: Editing Effects 104 S4 Plus Reference Manual Stereo Flange. In the case of the Stereo Flange, the signal is split into three parts with a dry signal and a separate Delay section for both left and right channels with one channel flanging up while the other channel flanges down.
Editing Effects: Chapter 7 S4 Plus Reference Manual 105 Pitch (Page 2) If the Pitch type is Mono Chorus, Stereo Chorus, Mono Flange or Stereo Flange, page 2 of the Pitch function contain the following four parameters: Waveform Shape Quad Knob [1] determines the LFO’s waveform shape.
Chapter 7: Editing Effects 106 S4 Plus Reference Manual Mod The Mod Function lets you control various effects parameters from the various controls on your MIDI Controller (keyboard, after-touch, pitch-bender, etc.). This is extremely useful when dynamic or real-time control is required in a live playing situation.
Editing Effects: Chapter 7 S4 Plus Reference Manual 107 the mod wheel as the Source, the mod wheel could be programmed to cause the Reverb to increase the decay (positive) or decrease the decay (negative).
Chapter 7: Editing Effects 108 S4 Plus Reference Manual EQ The shelving EQ is only available in Configuration #s 4 and 5. It provides bass and treble boost, and affects the entire Main Output (not just the Effects Sends).
Editing Effects: Chapter 7 S4 Plus Reference Manual 109 Overdrive Threshold This sets the level the signal feeding the Overdrive effect must be reach before the Overdrive effect will begin distorting. It can be set between 00 and 99. If this number is very low, the Overdrive effect will start to distort almost right away.
Chapter 7: Editing Effects 110 S4 Plus Reference Manual.
Global Settings: Chapter 8 S4 Plus Reference Manual 111 C HAPTER 8 G LOBAL S ETTINGS Global Edit Mode is where you will find several parameters which affect the entire instrument, such as overall master tuning, display contrast, controller settings, keyboard mode, edit mode and the 48 kHz input.
Chapter 8: Global Settings 112 S4 Plus Reference Manual transpose all sounds. Quad Knob [4] adjusts the S4 Plus’s overall Master Tuning (-99 to +99/up or down 1/2 step). Adjust this parameter when tuning the S4 Plus to other instruments. These parameters have no effect on drum sounds, the Range settings, or MIDI Out.
Global Settings: Chapter 8 S4 Plus Reference Manual 113 Reset Controllers A – D Found on Global Edit Page 4, the “A–D Reset” function (On/Off) determines whether the values for Controllers A–D will be reset to zero when a new Program or Mix is recalled.
Chapter 8: Global Settings 114 S4 Plus Reference Manual MIDI Program Select In Page 6 of Global Edit mode, Quad Knob [1] determines the MIDI Program Select mode (Off, On, Mix Select Channel 1 –16). When this is set to “Off”, the S4 Plus will not respond to incoming MIDI Program Change messages, nor will it transmit Program Changes.
Global Settings: Chapter 8 S4 Plus Reference Manual 115 If, additionally, a new Bank is selected in Mix Play Mode and any Channel’s MIDI Out parameter (Mix Edit Mode, Range Function, Page 2, Quad Kn.
Chapter 8: Global Settings 116 S4 Plus Reference Manual.
MIDI Transfer and Storage Operations: Chapter 9 S4 Plus Reference Manual 117 C HAPTER 9 MIDI T RANSFER A ND S TORAGE O PERATIONS Saving the User Bank to an External Card The entire contents of the S4 .
Chapter 9: MIDI Transfer and Storage Operations 118 S4 Plus Reference Manual Storing an Individual Program or Mix to an External Card You also have the option of storing a Mix or Program directly to a specific location in a RAM Sound Card Bank (instead of transferring the entire Bank) and vice versa.
MIDI Transfer and Storage Operations: Chapter 9 S4 Plus Reference Manual 119 Card Storage RAMifications Whenever you transfer an internal Bank to a RAM card, the result is that all Mixes in the transf.
Chapter 9: MIDI Transfer and Storage Operations 120 S4 Plus Reference Manual To send the entire User bank via MIDI: ¿ Connect a MIDI cable from the S4 Plus’s MIDI Out to the MIDI In of a device capable of receiving the data (another S4 Plus, etc.).
Troubleshooting: Appendix A S4 Plus Reference Manual 121 A PPENDIX A T ROUBLE -S HOOTING Trouble-Shooting Index If you are experience problems while operating the S4 Plus, please use the following table to locate possible causes and solutions before contacting Alesis customer service for assistance.
Appendix A: Troubleshooting 122 S4 Plus Reference Manual Checking Software Version The current software version may be determined by holding [GLOBAL] and pressing [PROGRAM]. The S4 Plus will indicate the current software version installed in the upper right display.
Troubleshooting: Appendix A S4 Plus Reference Manual 123 Field repairs are not normally authorized during the warranty period, and repair attempts by unqualified personnel may invalidate the warranty.
Appendix A: Troubleshooting 124 S4 Plus Reference Manual.
MIDI Supplement: Appendix B S4 Plus Reference Manual 125 A PPENDIX B MIDI S UPPLEMENT MIDI Basics Most current electronic instruments and signal processors, including the S4 Plus, contain an internal computer.
Appendix B: MIDI Supplement 126 S4 Plus Reference Manual have a channel number and are received by all units in a system, include Common, Real Time, and Exclusive messages. Channel Messages: Mode Messages There are two messages that determine the MIDI mode (i.
MIDI Supplement: Appendix B S4 Plus Reference Manual 127 4 Foot Controller (0-127) 5 Portamento Time (0-127) 6 Data Slider (0-127) 7 Main Volume (0-127) 8 Balance (0-127) 10 Pan (0-127) 11 Expression .
Appendix B: MIDI Supplement 128 S4 Plus Reference Manual System Common Messages Intended for all units in a system, some of these MIDI messages are: Song Position Pointer. This indicates how many “MIDI beats” (normally a 16th note) have elapsed since a piece started (up to 16,384 total beats).
MIDI Supplement: Appendix B S4 Plus Reference Manual 129 There are three MIDI registered parameters which the S4 plus will recognize in Mix Play Mode when General MIDI Mode is enabled.
MIDI Implementation Chart 130 S4 Plus Reference Manual MIDI IMPLEMENTATION CHART Function Transmitted Recognized Remarks Basic Channel Default Changed 1 — 16 1 — 16 each 1 — 16 1 — 16 each Mem.
Parameters Index: Appendix C S4 Plus Reference Manual 131 APPENDIX C: P ARAMETERS I NDEX Program Parameters Parameter Function Page Quad Knob Page in Manual Aftertouch Depth: Amp A mp 1 2 61 Aftertouc.
Appendix C: Parameters Index 132 S4 Plus Reference Manual Mod. Wheel Level: FLFO FL F O 2 2 70 Modulation Destination Mod 1 – 6 2 6 6 Modulation: Gate Mode Mod 1– 4 4 66 Modulation Level M o d 1.
Parameters Index: Appendix C S4 Plus Reference Manual 133 Voice Select: Sound Name Assign Voice 1 3 54 Volume Level 1 1 55 Mix Parameters Parameter Function Page Quad Knob Page in Manual Aftertouch Ra.
Appendix C: Parameters Index 134 S4 Plus Reference Manual.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 135 A PPENDIX D W HAT ’ S N EW IN THE 2.0 “P LUS ” U PGRADE If you have upgraded your S4 from an older version to the new 2.0 “Plus” version, this chapter will brief you on the changes and additions that will be new to you.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 136 S4 Plus Reference Manual Selecting Programs and Mixes When in Program Play Mode or Mix Play Mode, the Quad Knobs no longer let you scroll through the various Programs or Mixes (although you can still use the VALUE [¨] and [Æ] buttons to step through the Programs or Mixes one at a time).
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 137 Here is a list of the new samples that accompany the 2.0 “Plus” upgrade (* denotes new Voice Groups): Group New .
Appendix D: What’s New in the 2.0 “Plus” Upgrade 138 S4 Plus Reference Manual New Front Panel Functions To make it easy to navigate through the hundreds of additional Programs in the S4 Plus, several new functions have been added to existing buttons.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 139 Performance Controls via the Quad Knobs The four Quad Knobs now provide direct access to Controllers A, B, C and D, respectively, when either Program Play Mode or Mix Play Mode is selected.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 140 S4 Plus Reference Manual Global Edit Mode Controller A–D Reset A new parameter, called “A–D Reset”, has been added to Global mode to accommodate the Quad Knobs’ new function of providing direct access to Controllers A–D.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 141 Program Play Mode Envelope Delay Hold Each of the three envelopes in a single Sound – Pitch (PENV), Filter (FENV) .
Appendix D: What’s New in the 2.0 “Plus” Upgrade 142 S4 Plus Reference Manual Among the 6 possible modulation routings, routings 4 through 6 have had their Gate parameter replaced with a new Quantizing parameter (Program Edit Mode, Mod Function, Pages 4–6, Quad Knob [4]).
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 143 0 100 P OINTS: 0123456789 10 NORMAL 0 100 P OINTS: 0123456789 10 STEPPED Drum Voices Amp Envelope Gated Decay The Decay parameter in the Amp Envelope (AENV) can now be set above 100 and as high as 120.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 144 S4 Plus Reference Manual Effects Mode Improved Reverb Algorithms All of the reverb algorithms have been improved to provide more realistic room simulations.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 145 by a Chorus effect, which can be either a Mono Chorus, Mono Flange or Resonator. The Chorus is then followed by a Delay effect, followed by a Reverb effect, followed by a Lezlie.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 146 S4 Plus Reference Manual Mix Play Mode Assigning Programs In Mix Edit Mode, the “Bank” and “Program” parameters in the Program-Assign display have been rearranged, to be consistent with the Store Mode display.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 147 Receiving Controllers A third Page has been added to the Range function in Mix Edit Mode.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 148 S4 Plus Reference Manual General MIDI Enabling General MIDI Mode The version 2.0 “Plus” upgrade now makes the S4 fully General MIDI compatible.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 149 Channel of the Mix. If the Channel is selected using the MIDI [¨] and [Æ] buttons, the word “Edited” will appear next to the Program Number in the display if this parameter is received.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 150 S4 Plus Reference Manual Example: Let’s say you are using a MIDI sequencer to play back a sequence which selects several different Programs on various channels of a Mix (using program change messages).
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 151 Store Mode When Store Mode is accessed, the display in Page 1 will now indicate not only the Program Number where you can store to, but also the Bank Name. Use Quad Knob [1] to select a Bank, and use Quad Knob [2] to select a Program Number.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 152 S4 Plus Reference Manual • Any PCMCIA Type I SRAM Card • All AMD 'C' series and 'D' series Type I FLASH Cards.
What’s New in the 2.0 “Plus” Upgrade: Appendix D S4 Plus Reference Manual 153 into the internal User Bank, the Mixes in the User Bank are automatically reprogrammed to look for their Programs in the User bank. This is necessary, since it is possible for a Mix to use one or more Programs that are stored in different Banks.
Appendix D: What’s New in the 2.0 “Plus” Upgrade 154 S4 Plus Reference Manual.
Index S4 Plus Reference Manual 155 INDEX 48 kHz CLOCK IN 22, 115 ADAT 22 Aftertouch 15 amp 59 filter 58 pitch 55 AI-1 22 COMPARE 25, 31 Controllers A – D 15, 112– 113 contrast 11, 111 copy a sound.
Een belangrijk punt na aankoop van elk apparaat Alesis S4 Plus (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alesis S4 Plus heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alesis S4 Plus vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alesis S4 Plus leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alesis S4 Plus krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alesis S4 Plus bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alesis S4 Plus kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alesis S4 Plus . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.