Gebruiksaanwijzing /service van het product K550 van de fabrikant Empire Products
Ga naar pagina of 52
CCD Color Camera SICOLOR DIG K550 OPERATION MANUAL Please read this operation manual carefully for proper operation, and keep it for future reference. Hitachi Denshi, Ltd.
Contents CAUTION FOR SAFE OPERATION A IMPORTANT SAFETY INSTRUCTIONS B Over view 1 Features 1 Important precautions 2 CCD characteristics 3 Section names and functions 4 Connections 6 Video output conn.
CAUTION FOR SAFE OPERATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol is intended to alert the user to the presence of unisulated dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to.
11. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
20. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. if liquid has been spilled, or objects have fallen into the product.
WICHTIGE SICHERHEITSANWEISUNGEN 1. Alle Anweisungen lesen . Vor Betrieb des Erzeugnisses sollten alle Sicherheits-und Bedienungsanleitungen gelesen werden. 2. Die Anweisungen aufbewahren. Die Sicherheits-und Bedienungsanleitungen sollten fur zukunftigen Bezug aufbewahrt werden.
Teppich oder eine ahnliche Oberflache gestellt wird. Das Gerat sollte nur dann in Einbauinstallierung wie in einem Bucherschrank oder einem Gestell verwendet werden, wenn angemessene Ventilation vorgesehen ist bzw. die Anweisungen des Herstellers befolgt worden sind.
explosiven Substanzen in der direkten Umgebung. 18. Starke Sto-e oder Vibrationen Setzen Sie das Erzeugnis beim Transport nicht starken Sto-en oder Vibrationen aus. 19. Wartung Versuchen Sie nicht , dieses Erzeugnis Selbst zu warten , da Sie sich durch Offnen bzw .
MISES EN GARDE IMPORTANTES 1. Lire les instructions Lire toutes les instructions de securite et de fonctionnement avant de faire fonctionner l'appareil. 2. Conserver ces instructions Conserver les instructions de securite et de fonctionnement a des fins de reference ulterieure.
ventilation suffisante ou sans respecter les instructions du fabricant. 11. Sources d'alimentation L'appareil devra ^etre alimente exclusivement sur le type d'alimentation indique sur l'etiquette signaletique.
19. Reparations Ne pas tenter de reparer l'appareil soi-m^eme car le fait d'ouvrir ou de retirer les caches risque d'exposer l'utilisateur a des tensions dangereuses notamment.
Over view The K550 is a color television camera utilizing a 1/2-inch CCD (charge coupled device) solid-state pickup element and digital signal processing circuits.
Important precautions Power supply l Refer to the Main Specifications and be sure to use the specified power supply. l After switching on power, several seconds are required before a picture appears on the monitor. Handling l Do not remove the covers or disassemble the product.
CCD characteristics The following effects can occur with CCD elements and do not indicate malfunction. Smear and blooming When a strong light, such as a lamp or reflected sunlight, strikes the CCD, a band appears to extend above and below the image of the light.
Section names and functions 4.
5.
Connections Video output connection Connect the video output of the camera to the video input of a monitor or other equipment. When using a "loop through" connection of two or more monitors, set the 75 Ω switch of only the final monitor to on.
Lenses Note when selecting the lens 1) Observe the maximum size limit (A in the figure) when installing the lens. Internal damage can occur if a larger lens is used. 2) Avoid using a lens that is heavier than the camera. If unavoidable, be sure to provide a supporting means for the lens.
Lens switch When using an auto-iris lens, set the switch according to the lens type. VIDEO : Set to this position when using a video signal input system lens. DC : Set to this position when using a DC control voltage input system lens. Lens Terminals When using an auto-iris lens, install the accessory lens Terminals on to the lens cable as follows.
DC control voltage input system lens (Set lens switch to DC.) Flangeback adjustment Adjust the flangeback if the focus cannot be adjusted after installing or replacing the lens, or at the wide and telephoto extremes of a zoom lens. Open the lens iris and adjust as described below.
Camera mounting Important: Be sure to use the proper mounting screw. See below. Type : U1/4-20 Length: 8 mm maximum If the camera mounting screw of the tripod adaptor exceeds 8 mm, the camera can be damaged internally.
Setting menu description The camera settings and adjustments can be changed to accommodate usage conditions. When connected to a monitor, convenient on-screen menus facilitate checking and changing the settings and adjustments. The setting menus are composed as follows.
Menu operations Five rear panel Setup buttons are used to shift the cursor and select items from the menus. (1) Up button Shifts the cursor upwards (2) Down button Shifts the cursor downwards (3) Left.
Main menu 1) Press the Set button for longer than 2 seconds to display the MAIN MENU on the monitor screen . Main menu 2) Check the present settings at the MAIN MENU. 3) If changes are unnecessary, shift the cursor to the END position and press the Set button to return the normal video screen.
Text display A maximum of 24 alphanumeric characters (1 line) can be displayed on the screen. TEXT DISPLAY ON/OFF can be selected at the MAIN MENU. 1 )Press the Set button for longer than 2 seconds to display the MAIN MENU. 2 )Change the SET indication from CLOSE to OPEN (to enable memory write).
2) Position the cursor at SET and press the left (right) direction button to change CLOSE to OPEN in order to save the setting. 3) Position the cursor to LIGHT CONTROL and press the Set button to display the LIGHT CONTROL MENU. Light control menu Three control modes are available in combination with the AGC operation.
When an automatic electronic shutter is activated, the following phenomena may be observed. In such cases, change to other mode. l Strong smear or blooming is observed when objects are illuminated by strong illumination like a spot light. l Flickers or change in color are observed on the screen.
image. At the same time, high luminance components are compressed , thus avoiding obscured black and white fogging in the resulting image. Engaging the function also engages gamma correction.
Note: Select from among 8 areas when using a DC control voltage input type lens; select from among 3 horizontal areas (dotted outline in figure) when using a video signal input type lens. Sensing area positions l Video level setting Set the video level only when using a DC control voltage input type lens.
When the set button is pressed with the desired photometric area displayed, the video signal level adjustment scale appears. Backlight correction When strong backlight enters the lens, the lens iris closes accordingly, and the other objects become dark.
Note: Although the sensitivity increases when the maximum gain is increased, noise can increase in dark scenes or during sensitivity boost operation. If noise is objectionable during sensitivity boost operation, reduce the maximum gain or set AGC to OFF.
ATW: Auto-tracking white balance The white balance mode is set to auto-tracking at the factory. Set the cursor to ATW and press the Set button. ATW and preset (AWC) modes, the white balance is automatically controlled in the color temperature range of 2500 K to8000 K.
a) Press the up (down) direction button to return to the white balance mode. b) Press the left (right) direction button to set the cursor to AWC, then press the Set button. c) Again pickup a white object, but which fills a larger portion of the scene, then press the Set button.
Shutter speed setting Shutter speed selection 1 )Press the Set button for longer than 2 seconds to display the MAIN MENU. 2) Position the cursor at SET and press the left (right) direction button to change CLOSE to OPEN in order to save the setting. 3) Position the cursor to SHUTTER SPEED to flash the shutter speed indication.
Sync mode 1 )Press the Set button for longer than 2 seconds to display the MAIN MENU. 2) Position the cursor at SET and press the left (right) direction button to change CLOSE to OPEN in order to save the setting. 3) Position the cursor to SYNC MODE and press the Set button to display the menu.
Exposure control menu Exposure setting The Sens Up function increases the CCD exposure time and stores the image in an internal video memory. 1 )Press the Set button for more than 2 seconds to display the MAIN MENU. 2) Position the cursor at SET and press the left (right) direction button to change CLOSE to OPEN in order to save the setting.
2) To change the multiple, set the cursor to MANUAL and press the Set button (the multiple cannot be changed in the AUTO or OFF modes). When the multiple (16) flashes, it can be changed by using the left (right) direction button. Since the video level also changes, set the multiple for the optimum brightness, then press the Set button.
l Noise reduction This function reduces noise in the picture during high sensitivity operation. Factory setting is ON. Noise reduction can be set during the MANUAL or AUTO sensitivity mode. At the sensitivity select menu, MANUAL or AUTO. Press the up (down) button to flash NR, then press the left (right) button to select ON/OFF.
depressed to shift the image center toward the left. Press the Set button to set and shift the cursor to PAN. TILT (shift zoom center vertically) Set the cursor to TILT and press the right button (DOWN flashes). Hold the button depressed to shift the image center downwards.
Color temperature and white balance Color temperature is one of the properties of light. The unit is Kelvin(K), with 0 K equivalent to -273 ° C. The color temperature of a light source is related to the type of illumination and sky conditions. It is not directly related to brightness.
Remote control operation The K550 contains a built-in RS-232C driver that allows menu operations by remote control. The following items can be set by remote (e.g., computer) control. l ID number:ON/OFF l Composing ID number In addition to composing text, a camera identification number can be assigned.
The enhancer is fixed during EXPOSURE operation. Even if the setting is adjusted, the enhancer function does not change. l Negative/Positive select The data transfer rate can be selected for either 9600 bps or 2400 bps. To change the setting from 9600bps to 2400bps, switch off the camera power.
Main specifications 1 Color system PAL 2 Pickup element Interline transfer type CCD Total pixels 795(H )596(V) Effective pixels 752(H )582 (V) Scanning area 6.47 (H) 5 4.83 (V) mm Cell size 8.6 (H) 5 8 .3 (V) m 3 Scanning system 2:1 interlace 4 Scanning frequency Hor.
Coupling coil impedance Damper: 1150 Ω ± 10 % Drive : 190 Ω ± 10 % 16 Backlight compensation Activated automatically with the photometric area No.
Supplied accessories Operation manual 1 34.
Contents Remote interface and video output switches(see Insert) Remote interface switching Camera disassembly Remote interface switch setting Video out switching Camera disassembly Video output switch.
Remote interface and video output switches Camera internal switches can select the remote interface system and video output format. 1. Take off top cover Take out 5 screws and remote the top cover. 2. Remove PROC/MEN unit Take out 2 screws and disconnect 2 flat cables.
Change switch settings Refer to the following description and figures and change the switch setting as required. Refer to the figure and set the remote interface switches according to the remote interface system.
Video output selection l The camera video output format can be selected for VBS, Y/C, or 2-wire output(optional unit). l Refer to the figure and set the video output switches as required. Note: Factory setting is VBS/GL in. Be sure the rear panel GL 75 Ω switch is OFF except when setting VBS/GL in.
Option unit connection Camera disassembly 1) Remove top cover. Take out 5 screws and remove the top cover [A]. 2) Remove the PROC/MEN unit [B]. Take out 2 screws and disconnect 3 flat cables. Raise the board towards the lens side and slide it forward to remove the board.
2 wire unit installation 1) Install the 2 wire unit. Secure board bracket [K] to the bottom frame with 3 screws. Attach the 2 wire [J] to the board bracket with 3 screws. 2) Assemble the camera. Connect the lead connector [I] to the REG/SG unit [C]. 3) Set video output switch for 2 wire output(see Video output selection).
Een belangrijk punt na aankoop van elk apparaat Empire Products K550 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Empire Products K550 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Empire Products K550 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Empire Products K550 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Empire Products K550 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Empire Products K550 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Empire Products K550 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Empire Products K550 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
