Gebruiksaanwijzing /service van het product ECB350 van de fabrikant EnGenius
Ga naar pagina of 92
1 11N Long Range Multi-Func tion Gigabit CB / AP ECB350 11N Long Range Multi-Function Gigabit CB / AP V1.0.
1 T able of Content s 1 Introduction ....................................................................................................................................................................... 5 1.1 Features and Benefits ..................
2 5.3 Connection Status ............................................................................................................................................................................................. 29 5.4 Wireless Client List .........
3 8.6 WPS (Wi-Fi Protected Setup) ............................................................................................................................... ......................................... 70 8.7 WDS Link Settings ......................
4 R evision His tor y V er sion Date Notes 1.0 2012/02/22 F irst R elease.
5 1 Introduction The ECB350 is a multi-function 802.11b/g/n product with 8 major mult i-functions. The ECB350 is designed to operat e in ever y working environment including enterprises. The ECB350 is a W ir eless Network device that delivers up to 6x faster speeds an d 7x ext ended coverage than 802.
6 Suppor t Multiple S SID in AP mode (up to 4) Allow clients to access different networks thro ugh a single access point and assign different policies and functions for eac h SSID through the built in software. WP A/WP A2/IEEE 802.1x Suppor t Po w e r fu l da t a s e c u r i ty.
7 1.3 System Requirements The following are the minimum system r equir ement s in order conf igure the device. Computer with an Ethernet interf ace or Wireless Network function Windows OS (XP, Vista, 7), Mac OS, or Linux based operating systems Web-Browsing Application (i.
8 f) W ireless Extensions to Ethernet Networks Extend network coverage wher e the network cannot reach (i.e .: There is no wired internet connection to reach certain location of the environment). g) W ired L AN Backup Implement wireless LANs to provide backup for mission-critical applic ations running on wired networks.
9 2 Before you Begin This section will guide you through the installation pr ocess. Placement o f the ENGENIUS ECB350 is essential to maximize the ECB350’ s per formance. A void placing the ECB350 in an enclosed space such a s a closet, cabinet, or wardr obe.
10 2.2 Computer Settings (Windows XP/Windows 7) In order t o use the ECB350, you mu st f irs t conf igure th e T CP/IPv4 connection of your computer system.
11 In Windows XP , click Network Connections In Windows 7 , click View Network Status and Tasks in the Network and Internet section, then select Change adapter settings Right click on Loca.
12 Select “ Internet Protocol Version 4 (TCP/IPv4) ” and then select Properties Select Use the following IP address and enter an IP address that is different from the ECB350 and subnet mask then click OK . Note: Ensure that the IP address and subnet mask are on the same subnet as the device.
13 2.3 Apple Mac X OS Go to System Preferences (can be opened in the Applications folder or selec ting it in the Apple Menu) Select Network in the Internet & Network section Highlight .
14 2.4 Hardware Installation 1. Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Po rt). For more information, verify with your computer user manual. 2. Connect one end of the Category 5 Ethernet cable into th e RJ-45 port of the ECB350 an d the other end to the RJ-45 port of the computer that w ill use the ECB350.
15 Front Panel Rear Panel Front P anel LED Lights LED lights for W ireless, Ethernet por t and P ower . R ear Pa nel DC IN DC IN for P ower . Re s e t B u t to n One click for reset the device. Press over 10 seconds for r eset to factor y default. Ethernet por t for R J-45 cable.
16 3 Configuring Your Client Bridge This section will show you how to conf igur e the de vice using the web-b ased conf iguration interface. 3.1 Default Settings Please use your Ethern et por t or wireless network adapte r to connect the Client Bridge.
17 3.2 Web Configuration Open a web browser (Internet Explorer/ Firefox/Safari) and enter th e IP Address http://192.168.1.1 Note: If you have changed the default LAN IP Address of the Access Point, ensure you enter the correct IP Address. The default username and password are admin .
18 If successful, you will be logging in and see the ECB350 User Menu..
19 4 Building a Wireless Network The ECB350 has the ability t o operate in v arious operating mode s. The ECB350 is the ideal device in which you can build your WL AN. This chapter describes how to build a WL AN ar ound y our ECB350 using the operating modes o f the ECB350.
20 4.2 Client Router Mode In the Client R outer Mode, the ECB350 gr ant s Internet access t o multiple L ANs. In this mode, the ECB350’ s internal Dynamic Host Conf iguration Protocol (DHCP) ser ver automatically allocates ranges o f IP addr esses to each LAN that will access the Internet thr ough the ECB350.
21 4.3 Access Point Mode In Access P oint Mode, ECB350 behaves lik es a central connection for stations or client s that suppor t IEEE 802.11b/g/n networks. The stations and client s must be conf igured to use the same SSID and security p a sswor d to associat e with the ECB350.
22 4.4 Access Point Router Mode In Access P oint R outer Mode, ECB350 grants Int ernet access to multiple wireless client s. In this mode, the ECB350’ s internal Dynamic Host Conf iguration Protocol (DHCP) ser ver automatically allocates ranges o f IP addresses to each wir eless client that will access the Internet thr ough the ECB350.
23 4.5 WDS AP / WDS Station Mode The ECB350 also suppor ts WDS AP mode. This operating mo de allows wir eless connections to the ECB350 using WDS technology . In this mode, conf igure the MA C addr esses in bo th Access P oints t o enlarge the wireless ar ea by enabling WDS Link settings.
24 4.6 WDS Bridge Mode In WDS Bridge Mode, the ECB350 can wi relessly connect differ ent L ANs by conf iguring the MA C address and security settings of each ECB350 device. Use this mode when two wired LANs located a sm all distance ap ar t want to communicate with each other .
25 4.7 Repeater mode R epeater is used to re generate or r eplicate signals that ar e weak ened or distorted by transm ission over long distances and through ar eas with high levels o f electr omagnetic interference (EMI).
26 5 Status The Sta t u s section contains the following options: Main , W i reless Client List , and Sy s te m L o g . The following sections describe these options.
27 5.2 Main Clicking the Main link under the Sta t u s menu or clicking Home at the top-right of the ECB350 P age shows the status information about the current o perating mode.
28 - The Current W ireless Settings section shows wireless information such as Operati ng Mode, Frequency , and Channel. Since the ECB350 suppor ts multiple-SSIDs, information about each SSID , the ESSID and security set tings, are displayed ( Note: Pro f ile Settings is only applicable in Access P oint, WDS AP , or Rout er mode).
29 5.3 Connection Status Click on the Connection S tatus link under the Sta t u s menu. This page displays the current status o f the Network , including Network T ype, SSID , BSSID , Connection S tatus, W irele ss Mode, Current Channel, Securi ty , Data Rate, Noise Level, and Signal S trength.
30 5.4 Wireless Client List Clicking the W ireless Client List link under the Sta t us menu displays the list of clients a ssociated to the ECB350, alo ng with the MAC a ddresses and sign al st rength for each client. Clicking Re f re s h updates the client list.
31 5.5 System Log The ECB350 automatically logs (r ecords) event s o f possible inte rest in it s internal memor y . T o view the logged information, click the S ystem Log link under the Sta t us menu. If there is not enough int ernal me mor y to log all event s, older events ar e deleted fr om the log.
32 6 System 6.1 Operation Mode The ECB350 suppor ts 8 operating modes: Access P oint, C lient Bridge, WDS AP , WDS Bri dge, WDS S tation, Universal R epeater , R outer , and Client R outer . S ystem Proper ties Device Name Enter a name for the device.
33 6.2 IP Settings This page allows you t o modify the device ' s IP settings. Note: Only applicable in Access P oint, Client Bridge, WDS AP , WDS Bridge, WDS S t ation, and R epeater mode.
34 6.3 Spanning Tree Setting This page allows you to modify the Spanning T r ee settings. Enabling Spanning T ree pr otocol will pr event network loops in your L AN network . Note: Only in Access P oint, Clie nt Bridge, WDS AP , WDS Bridge, WDS S tation, and R epeater mode.
35 so that when a new bridge comes onto a busy network , it analyzes dat a traff ic befor e participating. Priority Specify the Priority Number . A smaller number has great er priority . Accept / Cancel Click Accept to conf irm the changes or Cancel to cancel and return previous settings.
36 7 Router This section is only applicable for AP Router Mode or Client R outer Mode . 7.1 WAN Settings There ar e four types o f W AN connections: S tatic IP , DHCP , PPP oE, and PPTP . Please contact your ISP to f ind out which settings you should choose.
37.
38 S tatic IP Internet Connection T y pe Select S t atic IP to begin conf iguration o f the S t atic IP connection. Account Name Enter the account name provided by your ISP . Domain Name Enter the domain name provided by your ISP . MTU Specify the Maximum T ransmit Unit (MTU) size.
39 7.1.2 DHCP Select DHCP as your W AN connection type to obtain an IP addr ess automatically . Y ou will need to enter the account name as your hostname and, optionally , enter DNS information.
40 DHCP Internet Connection T y pe Select DHCP to begin conf iguration o f the DHCP connection. Account Name Enter the account name provided by your ISP . Domain Name Enter the domain name provided by your ISP . MTU Specify the Maximum T ransmit Unit (MTU) size.
41 7.1.3 PPPoE Select P oint - to-P oint Protocol over Ethernet (PPP oE) if your ISP uses a PPPoE connection. Y our ISP will pr ovide you with a username and pa ssword. This selection is typically used for DSL ser vices. R emove your PPP oE soft ware fr om your computer , as it is not needed and will not work with your ECB350.
42 PPP oE Internet Connection T y pe Select PPP oE to begin conf iguration of the PPP oE connection. MTU Specify the Maximum T ransmit Unit (MTU) size. It is recommended you accept the default setting of Auto . Other wise, pack et s will be fragmented downstream if the MTU is set too high or too low , which impacts network performance.
43 7.1.4 PPTP Select PPTP as your W AN connection type if your Internet Ser vice Pr ovider (ISP) uses a P oint -to-P oint T unneling Protocol (PPTP) connection. Y ou will need to provide the IP a ddress, Subnet Mask , Default G at ewa y (Optional), DNS (Optional), Ser ver IP , Username, and P assw or d provided by your ISP .
44 PPTP Internet Connection T y pe Select PPTP to begin conf iguration of the PPTP connection. MTU Specify the Maximum T ransmit Unit (MTU) size. It is recommended that you accept the default setting of Auto . Other wise, pack et s will be fragmented downstream if the MTU is set too high or too low , which impacts network performance.
45 7.2 LAN Settings This page allows you t o modify the device ' s L AN settings. L AN Settings IP Address The L AN IP Address of this device. IP Subnet Mask The L AN Su bnet Mask o f this device. Use R outer As DHCP Ser ver Check this option to enable the Internal DHCP ser ver .
46 7.3 VPN Pass Through The VPN P assthr ough allows a secure vir tual private netw ork (VPN) connection between two computers. Enabling the options on this page opens a VPN por t and enables conne ctions to p ass thr ough the ECB350 without interruption.
47 7.4 Port Forwarding P ort for war ding can be used to o pen a po r t or range o f por ts t o a device on your network . Using por t for war ding, you can set up public ser vices on your network .
48 Po r t F o r w a r d i ng Po r t F o r w a r d i ng Enables or disables the Port Forwarding feature. Ser vice Name Enter a nam e or description to help you identify this entr y . Protocol Select a protocol for the application. Choices are Both , TC P , and UDP .
49 7.5 Port Triggering If you use Internet applications which use non-standard connections or port numbers, you may f ind that they do not function correctly because they ar e blocked by the device’ s f irewall. P or t T riggering will be required for these applications to wo rk .
50 P or t T rigger ing P or t T rigger ing Enables or disables the Port Triggering feature. Ser vice Name Enter a name or description to help you identify this entr y . T rigger Por t This is the outgoing (outbound) por t numbers for this applic ation.
51 7.6 DMZ If you have a computer that cannot run Internet applicat ions pr operly fr om behind the ECB350, you can allow the computer to have unr es tricted Internet access. Enter the IP addr ess of that comput er as a Demilit arized Zone (DMZ) host with unrestricted Internet access.
52 7.7 MAC Filter Y ou can choose whether to Deny or Allo w only those devices listed in the MA C Filtering table to access the Int ernet. MAC Filter MAC Filter Enables or disables the MAC Filter function.
53 7.8 IP Filter Y ou can choose whether to Deny or Allow only devices with thos e IP Addres ses listed on the IP F ilter T able from accessing cer tain ports. This can be used to contr ol which Internet applications the computers can access. Note : Y ou will need to have knowledge of which Inte rnet port numbers each ap plication uses.
54 IP Filter IP Filter Enables or disables the IP Filter function. Deny all client s with IP addresses listed below to access the network When selected, the computers listed in the IP Filter table will be Denied to access the Internet.
55 7.9 URL Filter Y ou can deny access to certain websites by blocking k eywords in the URL web a ddr ess. For example, “ gamer ” has been a dded t o the URL Filter T able.
56 8 Wireless 8.1 Wireless Network This page displays the current st atus o f the W ireless settings of the ECB350. Access P oint / WDS AP / R outer mode:.
57 W ireless Network (Access Point / WDS AP / R outer mode) W ireless Mode W ir eless mode suppor ts 802.11b/g/n mixed mode. Channel HT Mode The default channel bandwid th is 20/40MHz. The la rger the channel, the better the transmission quality and speed.
58 SSID Prof ile SSID Prof ile SSID Specify the SSID for the current pr of ile. VL AN ID Specify the VL AN tag for the current pr of ile. Suppressed SSID Check this option to hide the SSI D from client s. If checked, the SSID will not appear in the site sur vey .
59 Client Bridge / Client Router / WDS S tation / Repeater mode: W ireless Mode W ir eless mode suppor ts 802.11b/g/n mixed mode. SSID The SSID is a unique named shared amongst all th e points of the wir eless network . The SSID must be identical on all points of the wir eless network and cannot exceed 32 characters.
60 8.2 Wireless Security The W ir eless Security section lets you c onf igure the ECB350' s security modes: WEP , WP A-PSK , WP A2-PSK , WP A-PSK Mixed, WP A , WP A2, and WP A Mixed. W e strongly recommend you use WP A2-PSK. WEP Encryption: WEP Encr yption Auth T ype Select Open S ystem or Shared Key .
61 Y ou must enter a Key V alue for the Default Key . Encr yption Key # Enter the ke y value or v alues you wish to use. On ly the Key selected a s Default is required. The others are optional. WPA-PSK (WPA Pre-Shared Key) Encryption: WP A-PSK (WP A Pre-Share d Key) Encr yption Encr yption Select the WPA encryption type you would like.
62 Note : 802.11n does not allow WEP/WP A-PSK TKIP/WP A2-PSK TKIP secu rity mode. The connection mode will automatically change from 802.11n to 802.11g. WPA Encryption: Only in Access Point / WDS AP / Router mode WP A Encr yption Encr yption Select the WPA encryption type you would like.
63 8.3 Site Survey Use this feature to scan nearby Access P oint s. Note: Only applicable in Client Bridge, Client R outer , or Repeater modes. 1. Click Site Sur vey .
64 2. Scanning the nearby Access P oint s 3. The ECB350 will list the available access point s after site sur vey ..
65 Site Sur vey (Client Bridge / Client R outer / R epeater mode) BSSID Access Point's wireless MAC address. SSID SSID that the Access P oint is bro adca sting. Channel Channel that the Access P o int is using. Signal Level (dBm) your station. Signal strength from the Access P oin t to Ty p e The band that the Access P oint is using.
66 5. Enter the corr ect security setting..
67 8.4 Wireless MAC Filter W ir eless MAC Filters are used to allow or deny network acce ss to wireless client s according to their MAC a ddresses. Y ou can manually add a MA C addr ess to r estrict the pe rmission to access ECB350. The default setting is Disable W ireless MAC Filter .
68 8.5 Wireless Advanced This page allows you to conf igure wirele ss a dvance settings. It is recommended th at the default s ettings are used unless the user has experienc e with more a dvanced networking featur es.
69 W ireless Advanced Data Rat e Select a data rate fr om the drop-down list. The data rate a ffects thr oughput o f data in the ECB350. The lower the data rat e, the throughput will be lower , but so will the transmission dis tance. Tr a n s m i t P o w e r Set the power output of the wir eless signal.
70 8.6 WPS (Wi-Fi Protected Setup) W i-Fi Protect ed Setup (WPS) feature is following the W i-F i Alliance WPS s tandar d and it eases the set up o f security- enabled W i-Fi networks in the home and small o ff ice envir onment.
71 W i-F i Protected Setup (WPS) WPS Select to Enable or Disable the WPS feature. WPS Current S t atus Shows whether the WPS function is Conf igured or unConf i gured . When it is Conf igur ed, the WPS has been used to authorize connection between the device and wireless client s.
72 8.7 WDS Link Settings Using WDS (W ir eless Distribution System) will allow you to conn ect to Access P oints wirelessly . Doing so will extend the wired infrastructur e to locations wher e cabling is not possible or inef f i cient to implement. Note: Compatibility betw een different brands and mo dels o f a ccess points is not guarant eed.
73 WDS Link Settings MAC Addr ess Enter the Access Point’s MAC address to which you want to extend the wireless area. Mode Select Disable or Enable from the drop-down list. Accept / Cancel Click Accept to conf irm the changes or Cancel to cancel and return previous settings.
74 9 Management 9.1 Administration This page allows you t o change the ECB350 pa ssword a s well as conf igure the device by r emote acce ss. By default, the username is admin and the pa ssword is: admin . The p asswor d can contain 0 to 12 alphanumeric characters and is case sensit ive.
75 9.2 Management VLAN This page allows you t o assign a VL AN t ag to the p acket s. A VL AN is a group of comput ers on a network whose software has been conf igured so to behave a s if they wer e on a sepa rate Local Area Network (LAN). Computers on a VL AN do not have to be physically locat ed next to one another on the L AN.
76 9.3 SNMP Settings This page allows you t o assign the Cont act Details, Loca tion, Community Name, and T rap Settings for Simple Network Management Pr otocol (SNMP). This is a networking management pr otocol used t o monitor network attached devices.
77 Community Name (R ead/Write) Specify the passwor d for the SNMP community with read/writ e access. Tr a p T rap Des tination Address Specify the IP address o f the computer that will receive the SNMP traps. T rap Des tination Community Name Specify the passwor d for the SNMP trap community .
78 9.4 Backup/Restore This page allows you t o save the curren t device conf igurations. When you save th e conf i gurations, you also can relo ad the saved conf igurations into the device thr ough the R estore Saved Settings from A File section.
79 9.5 Firmware Upgrade This page allows you t o upgrad e the f i rmware o f the ECB350. To perform the Firmware Upgrade: 1. Click the Browse button and navigate the OS File System to the location of the upgrade file. 2. Select the upgrade file. The name of the file will appear in the Upgrade File field.
80 9.6 Time Setting This page allows you t o set th e internal clock o f the ECB350. Ti me Manually Set Date and T ime Manually specif y the date and time.
81 9.7 Log This page allows you t o setup S yslog and local log functions o f the ECB350. Log Sys l o g Enable or disable the syslog function. Log Ser ver IP Address Enter the IP addr ess of the log ser ver . Local Log Enable or disable the local log ser v ice.
82 9.8 Diagnostics This page allows you t o analyze the connection quality of the ECB350 and trace the r outing t able to a t arget in the network . Diagnosis Ta r g e t I P Enter the IP a ddress you w ould like to sear ch. Ping P acket Size Enter the p ack et size of each ping.
83 9.9 LED Control This page allows you t o control LED for P ower , L AN inter face and WL AN inter face of the ECB350..
84 9.10 Logout Click Logout in the Management menu to logout o f the ECB350 interf ace..
85 9.11 Reset In some circumstances, it may be r equired to for ce the device to r eboot. Click on R eboot the Device to reboot the ECB350..
86 Appendix A – FCC Interference Statement Federal Communication Commission Inter ference S tatement This equipment has been tested an d found to comply with the limits for a Class B di gital device, pursuant t o P ar t 15 of the FCC Rules.
87 Appendix B – IC Interference Statement Industr y Canada statement: This device complies with RSS-210 of the Industr y Canada Rules. Operation is subject to the following two conditions: (1) This .
88 Ce dispositif a été conçu pour foncti onner avec une antenne ayant un gain maximal de diople antenne avec dB [5] . Une antenne à gain plus élevé est st rictement interdite par les règlement s d 'Indust ri e Canada. L'impédance d 'antenne requise est de 50 ohms.
89 Appendix C – CE Interference Statement Europe – EU Declaration of Conformity This device complies with the essential r equ irements of the R&TTE Directive 1999/5/EC.
90 This device may not be use d for setting up outdoor radio links in France and in some are as the RF out put power may be limited t o 1 0 m W E IR P in the frequenc y range of 245 4 – 2483.5 MHz. For det ailed information the end-user should c ontact th e national spectrum authority in France.
Hierbij verklaart [naam van de fabrikant] dat het to estel [type van toestel] in overeenstemming is met de esse ntiële eisen en de andere r e lev ante bep alingen van richtlijn 1999/5/EG .
Een belangrijk punt na aankoop van elk apparaat EnGenius ECB350 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EnGenius ECB350 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EnGenius ECB350 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EnGenius ECB350 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EnGenius ECB350 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EnGenius ECB350 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EnGenius ECB350 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EnGenius ECB350 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
