Gebruiksaanwijzing /service van het product ENS1200 van de fabrikant EnGenius
Ga naar pagina of 64
User M anual Business Solutions Dual Band L ong Range Wir eless A C1750/A C1200 Out door A ccess P oin t ENS1750/ENS1200 version 1.0.
2 IMPORTANT To install this Access Point please refer to the Quick Installation Guide included in the product packaging..
3 Chapter 1 Product Overview............................................... 4 Key Features/Introduction........................................................ 5 System Requirements............................................................... 6 Package Contents.
4 Chapter 1 Product Overview.
5 Maximum data rates are based on IEEE 802.11 standar ds. Actual throughput and range may vary depending on many factors including environmental c onditions, distance between devices, radio in ter f erence in the opera ting environment , and mix of devices in the network.
6 same time providing 5GHz band under 802.11 ac/a/n mode for communicating to and from 5GHz capable computers, tablets or smart phones or transferring les. Several ENS Dual Band seriess can be deployed in a campus setting using the 5GHz band as a backhaul to provide multiple 2.
7 Package Contents The EN S D ual Ba nd ser ies package contains the following items:* • ENS Dual Band series Access Point • InternalDualConcurrentOmniAntenna • PowerAdapter(48V/0.
8 Distance Control (Ack Timeout) Multicast Supported Band Steering Fast Roaming Auto Channel Selection BSSID Support Easily Management VLAN Tag / VLAN Pass-through Guest Network QoS:ComplaintwithIEEE802.
9 SSH Physical/Environment Conditions Operating: Temperature:-4°Fto158°F(-20°Cto70°C) Humidity(non-condensing):90%orless Storage: Temperature:.
10 Physical Interface Dimensions and Weights Length:280.48mm(11.22”) Width:217.65mm(8.58”) Depth:55.50mm(2.1”) Weight:1.88Kg(4.17lbs) 1 LED Indicators: LED lights for Power, LAN Port 1, LAN Port 2, 2.4 GHz Connection and 5 GHz Connection.
11 Chapter 2 Before You Begin.
12 Windows XP/Windows 7/Windows 8 In order to use the ENS Dual Band series, you must rst congure the TCP/IPv4 connection of your Windows OS computer system. 1a. Click the Start button and open the Control Panel 1b .
13 3. Right click on Local Area Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties . 5. Select Use the following IP address and enter an IP address that is different from the ENS and Subnet mask, then click OK .
14 Apple Mac OS X 1. Go to System Preferences (Which can be opened in the Applications folder or selecting it in the Apple Menu). 2. Select Network in the Internet & Network section. 3. Highlight Ethernet. 4. In Congure IPv4 , select Manually. 5.
15 1. Connect one end of the Ethernet cable into the main LAN port (PoE) of the Access Point and the other end to theAPEthernetportonthePoEinjector. 2. Connect the Power Adapter to the DC-IN port of the PoE injector and plug the other end in to an electrical outlet.
16 To attach the ENS Dual Band series to a wall: 1. Attach the location sticker to the desired location on the wall and use a 6mm drill bit to drill the two marked holes. 2. Insert the screw anchors into the 6mm holes drilled then insert and the screws and tighten.
17 To attach the ENS Dual Band series to a pole using the provided pole mounting Ring: 1. Use aatheadscrewdriverto unfastenthescrewonthe pole mounting ring and thread it through the middle tab on the rear of the access point.
18 Chapter 3 Conguring Your Access Point.
19 This section will show you how to congure the device usingtheweb-basedcongurationinterface. Default Settings Please use your Ethernet port or wireless network adapter to connect the Access Point. IP Address 192.
20 Chapter 4 Building a Wireless Network.
21 The ENS Dual Band series has the ability to operate in various modes. This chapter describes the operating modes of the ENS Dual Band series. Access Point Mode In Access Point Mode, ENS Dual Band series behaves likes a central connection for stations or clients that support IEEE 802.
22 The ENS Dual Band series can beused as a centralized Outdoor Access Point with which other EnGenius Wireless N 2.
23 WDS AP Mode The E N S D u al B an d se ri es also supports WDS AP mode. This operating mode allows wireless connections to the EN S D u a l B an ds er ie susing WDS technology.
24 WDS Bridge Mode In WDS Bridge Mode, the ENS Dual Band series can wirelessly connect different LANs by conguring the MAC address and security settings of each ENS Dual Band series device.
25 Chapter 5 Status.
26 Save Changes This page lets you save and apply the settings shown under Unsaved changes list , or cancel the unsaved changes and revert to the previous settings that were in effect. Device Status Clicking the Device Status link under the Overview menu shows the status information about the current operating mode.
27 Network settings such as the LAN IP Address, Subnet mask, and DNS Address. • The Wireless LAN Information 2.4 GHz/5 GHz section shows wireless information such as Operating Mode, Frequency, and Channel.
28 2.4 GHz/5 GHz Connection List Click the connection link under the Overview menu displays the connection list of clients associated to the ENS Dual Band series’s 2.4 GHz/5 GHz, along with the MAC addresses and signal strength for each client.
29 Chapter 6 Network.
30 IPv4/IPv6 Settings This page allows you to modify the device’s IP settings. IP Network Settings: Select whether the device IP address willuse astatic IPaddressspecied inthe IPaddresseld or be obtained automatically when the device connects to a DHCP server.
31 Spanning Tree Protocol (STP) Settings This page allows you to modify the Spanning Tree settings. Enabling the Spanning Tree protocol will prevent network loops in your LAN network. Spanning Tree Status : Enables or disables the Spanning Tree function.
32 Chapter 7 2.4 GHz & 5 GHz Wireless.
33 Wireless Settings Device Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast to other devices. Band Steering: Enable Band Steering to send 802.11n clients to the 5 GHz band, where 802.
34 This page displays the current status of the Wireless settings of the ENS Dual Band series. 2.4 GHz/5 GHz Wireless Network Operation Mode: Select Operation Mode . The ENS Dual Band series supports three different operation modes: Access Point, or WDS (WDS AP, WDS Bridge, and WDS Station).
35 Distance: Species the distance between Access Points and clients. Note that longer distances may drop higher- speed connections. Save: Click Save to conrm the changes or Cancel to cancel and return to previous settings.
36 2.4 GHz/5 GHz SSID Prole Current Prole: You can congure up to sixteen (16) different SSIDs (eight (8) per band). If multiple client devices will be accessing the network, you can arrange the devices into SSID groups.
37 Wireless Security The Wireless Security section lets you congure the ENS Dual Band series’s security modes: WEP, WPA-PSK, WPA2- PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. It is strongly recommend that you use WPA2-PSK.
38 Wireless MAC Filtering Wireless MAC Filtering is used to allow or deny network access to wireless clients (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. You can manually add a MAC address to restrict permission to access the ENS Dual Band series.
39 Wireless Advanced Wireless Trafc Shaping Trafc shaping regulates the ow of packets leaving an interface to deliver improved Quality of Service. Enable Trafc Shaping : Check this option to enable WirelessTrafcShaping.
40 WPA Mixed-Enterprise: Access Point / WDS AP mode Encryption: Select the WPA encryption type you would like. Please ensure that your wireless clients use the same settings. Radius Server: Enter the IP address of the Radius server. Radius Port: Enter the port number used for connections to the Radius server.
41 Fast Roaming Enable the function to serve mobile client devices that roam from Access Point to Access Point. Some applications running on Client devices require fast re-association when they roam t.
42 WDS Link Settings Using the WDS (Wireless Distribution System) feature will allow a network administrator or installer to connect to Access Points wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefcienttoimplement.
43 Guest Network Settings Adding a guest network allows visitors to use the Internet without giving out your ofce or company wireless security key. You can add a guest network to each wireless network in the 2.4 GHzb/g/n and 5 GHza/n frequencies.
44 Chapter8 Management.
45 Management VLAN Settings This page allows you to assign a VLAN tag to packets sent over the network. A VLAN is a group of computers on a network whosesoftware has beencongured so thatthey behave as if they were on a separate Local Area Network (LAN).
46 SNMP Settings This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for a Simple Network Management Protocol (SNMP). SNMP is a networking management protocol used to monitor network attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network.
47 CLI Settings CLI : The Command Line Interface (CLI) allows you to type commands instead of choosing them from a menu or selecting an icon. SSH : Enable Secure Shell (SSH) to make secure, encrypted connections in the network. Secure Shell is a network protocol that allows data to be exchanged using a secure channel between two network devices.
48 Username: Enter the username for the email account that will be used to send emails. Password: Enter the password for the email account that will be used to send emails. SMTP Server: Enter the IP address or hostname of the outgoing SMTP server. Port: Enter the SMTP port number to use for outbound emails.
49 Time Setting This page allows you to set the internal clock of the ENS Dual Band series. Manually Set Date and Time: Manually specify the date and time.
50 Auto Reboot Settings You can specify how often you wish to reboot the ENS Dual Band series. Auto Reboot Setting : Enables or disables the Auto Reboot function. Frequency of Auto Reboot : Specifies how often you wish to reboot the ENS Dual Band series by Min, Hour, Day or Week.
51 Wi-Fi Scheduler The Wi-Fi Scheduler can be created for use in enforcing rules. For example, if you wish to restrict web access to Mon-Fri from 3pm to 8pm, you could create a.
52 Ping Test Parameters This page allows you to analyze the connection quality of the ENS Dual Band series and trace the routing table to a target in the network. Target IP: Enter the IP address you would like to search. Ping Packet Size: Enter the packet size of each ping.
53 Speed Test Parameters / LED Control This page allows you to control LED on/off for Power, LAN interface, or 2.4 GHz/5 GHz WLAN interface. LED Control Power: Enables or disables the Power LED indicator. LAN: Enables or disables the LAN LED indicator.
54 This page allows you to change the ENS Dual Band series username and password. By default, the username is: admin and the password is: admin . The password can contain from 0 to 12 alphanumeric characters and is case sensitive. Account Settings Administrator Username : Enter a new username for logging in to the New Name entry box.
55 Backup/Restore This page allows you to save the current device configurations. When you save your configurations, you also can reload the saved configurations into the device through the Restore Saved Settings from a file section.
56 User Setting The function allows you to backup the current device configurations into the ENS Dual Band series as the default value. If extreme problems occur, or if you have set the ENS Dual Band series incorrectly, you can push the Reset button to revert all the configurations of the ENS Dual Band series to the user default.
57 System Log The ENS Dual Band series automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the Log link under the System Manager menu. If there is not enough internal memory to log all events, older events are deleted from the log.
58 Logout Click Logout in Management menu to logout. Reset In some circumstances, it may be required to force the device to reboot. Click on Reset to reboot the ENS Dual Band series.
59 Appendix.
60 Federal Communication Commission Interference Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device , pursuant to P ar t 15 of the FC C Rules. These limits are designed to pr ovide reasonable pr otec tion against harmful interference in a r esidential installation.
61 Europe – EU Declaration of Conformity This device complies with the essen tial requir ements of the R&T TE Directive 1999/5/EC. The f ollowing test methods ha ve been applied in or der to pro.
62 This device is a 5GHz wideband transmission system (tr ansceiver), intended f or use in all EU member states and EFT A countries, ex cept in F rance and Italy where restrictive use applies.
63 F rançais [Fr ench] P ar la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conf orme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
64 Industry Canada statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the follo wing two conditions: (1) This device ma y not cause harmful inter f erence , and (2) this device must accept any int er fer ence rec eived , including interference that may cause undesir ed operation.
Een belangrijk punt na aankoop van elk apparaat EnGenius ENS1200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EnGenius ENS1200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EnGenius ENS1200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EnGenius ENS1200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EnGenius ENS1200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EnGenius ENS1200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EnGenius ENS1200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EnGenius ENS1200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
