Gebruiksaanwijzing /service van het product EQ610 van de fabrikant EverFocus
Ga naar pagina of 26
1/3” Color Day/Night plus Wide Dynamic Range Box Style Camera Operation Instructions Model No. EQ610 Please read this manual first for correct installation and operation. This manual sh ould be retained for future reference. The information in this manual was current when published.
- 1 - T ABLE OF CONTENTS 1. PRODUCT OVER VIEW ............................................................................................................... 3 1.1 Main Features .........................................................................
- 2 - 5.6 DA Y NIGHT ................................................................................................................................................. 19 5.7 3DNR ........................................................................
- 3 - 1. PRODUCT OVERVIEW Amazing color low light sensitivity of .05 lux before the added benefits of digi tal signal processing technology , delivered by a 1/3” Sony Super HAD II sens or , is just the beginning with the new EverFocus EQ610.
- 4 - 1.3 Specifications Pickup D evice 1/3" SONY Super HAD II CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec; PAL: 625 TV lines, 50 fields/sec. Picture Elements 768 x 494(NTSC); 752 x 582(PAL) Horizontal Resolution 560 TVL Sensitivity 0.
- 5 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel The light sensor is for optional control of D/N switching levels in some applications. See section 5.
- 6 - ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 11 ○ 9 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 4 ○ 12 ○ 10 ○ 8 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 10 ○ 10 2.
- 7 - GND D/N Out D/N In Motion RS485- RS485+ ○ 1 T erminal Block T erminal block connections: Connect wires to the terminal block by: strip the in sulation back ½” from the end of the wire; pres.
- 8 - ○ 2 Menu button for cursor left movement ○ 3 Menu button for cursor up movement ○ 4 Button to access on-screen setting menu and for SET command ○ 5 Menu button for cursor right movement .
- 9 - 3. INSTALLATION 1. Unscrew/remove the cover cap from the lens mount. 2. If C mount lens is used, please add the C adaptor mount ring (the 5mm thick ring in the accessory pack) between the lens and the mount. Please note: Failure to use a spacer ring when attaching a C mount lens can damage the camera! 3.
- 10 - 4. RS-485 CONNECTION 1. Connect the cable from keyboard or DVR RS485 port to the camera’s RS485 port. 2. Connect the cable from video output BNC of the camera to a monitor or DVR input BNC. 3. The RS485 ID set in the OSD Menu on the camera has to be the same as CAM ID used by the keyboard or DVR to control this camera.
- 11 - 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 Setup Buttons T o set items on the user setup menu, use the following buttons on the back panel. ○ 1 Left Button: Use this button to select or adjust the parameters of the selected item.
- 12 - 5.2 Display/Close the user setup menu screen I. Press the SET button The menu screen will appear on the monitor . II. Using the cursor button Use the cursor buttons or to move the cursor up or down. Use the cursor buttons or to adjust the mode or parameter settings.
- 13 - EQ610 Menu T ree.
- 14 -.
- 15 -.
- 16 - 5.3 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by using the UP and DOWN buttons. 2. Please select the type of the l ens used (Manual/DC type) by pressing the LEFT or RIGHT button. 3. Please select RETURN and press the SETUP button if you would like to return to the previous menu.
- 17 - 5.4.4 SENSE-UP SENSE-UP is used to keep a brilliant, vivid scr een image under low light level conditions by automatically compensating for changes in the level of light. 1. Please direct the arrow to point to “SEN SE-UP” by using the UP and DOWN buttons.
- 18 - HEIGHT : Set the height of an area for the BLC to be adjusted. T he value adjustable is 0~6. RETURN: Press “RET” to save all settings in the BLC menu and return to the previous menu. Press “END” to save all the menu settings and exit. 5.
- 19 - 5.4.8 Return Press “RET” to save all settings in the Ex posure menu and return to the previous menu. Press “END” to save all the menu settings and exit. 5.5 WHITE BALANCE CONTROL The screen color can be adjusted by using the WHITE BALANCE function.
- 20 - S-Level: Set the start level from 0~100. E-Level: Set the end level from 0~100. EXT : The picture can switch automatically to co lor in a normal environm ent and to B/W when the ambient illumination is low based on the illumination reaching a light sensor; or it may be directly controlled by a trigger voltage.
- 21 - 5.8.2 D-EFFECT 5.8.2.1 FREEZE (Note that pr actical applicat ion of this f eat ure requires direct acc ess to the camera menu in rea l time). -OFF: Select “OFF” to view moving pictures. -ON: Select “ON” to view still pictures. 5.8.2.2 MIRROR -OFF: Disable the effects.
- 22 - additionally color reversed, with red areas appeari ng cyan, greens appearing magenta and blues appearing yellow . 5.8.2.6 RETURN Return: Press “RET” to save all settings in D- EFFECT menu and return to the previous menu. Press “END” to save all the menu settings and exit.
- 23 - 5.8.5 PRIVACY This mode masks areas you do not want to display on the screen. -OFF: Disable the PRIV ACY function. -ON: AREA SELECT : Please s elect the area you woul d like to hide from the 8 areas in AREA SELECT mode AREA DISPLA Y : Select “ON” to use the area selected in the AREA SELECT .
- 24 - 5.9.4 RETURN Press “RET” to saves all settings in the AD JUST menu and returns to the previous menu. Press “END” to save all the menu settings and exit. 5.10 RESET 5.10.1 FACTORY RESET Reset to the default settings. 5.10.2 RETURN Press “RET” to return to the previous menu.
- 25 - EverFocus Electronics Corp. Headquarter s Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,Technology Trade Building.
Een belangrijk punt na aankoop van elk apparaat EverFocus EQ610 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EverFocus EQ610 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EverFocus EQ610 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EverFocus EQ610 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EverFocus EQ610 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EverFocus EQ610 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EverFocus EQ610 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EverFocus EQ610 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
