Gebruiksaanwijzing /service van het product EQH5000 van de fabrikant EverFocus
Ga naar pagina of 27
HD CCTV Digital V ideo Camera OPERA TION MANUAL EQH5000 Before attempting to connect or operate, please read and follow these instructions..
CONTENTS 1. CAUTIONS 2. FEA TURES 3. EQUIPMENT AND ACCESSORIES 4. CAMERA COMPONENT DESCRIPTION 5. INST ALLA TION 6. DIMENSIONS 7. SPECIFICA TIONS 8. DIGIT AL INPUT/OUTPUT CIRCUIT (Future use) 9.
4 1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
1. CAUTIONS 5 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. FEA TURES • High Resolution 1/3 ˝ SONY Progressive Color CMOS Sensor , 1280x720 30fps • Supports Various Digital Video Output 720p 30, 720p 60 720p 25, 720p 50 • Video Outputs Primary HD-SDI.
3. EQUIPMENT AND ACCESSORIES HD CCTV Digital Video Camera C-MOUNT ADAPTOR RING OPERATION MANUAL TERMINAL BLOCK 7 * NOTE PLEASE REMOVE PROTECTION FILM.
4. CAMERA COMPONENT DESCRIPTIONS • FRONT 8 MOUNTING HOLE(1/4"-20 UNC) AUTO IRIS JACK C-MOUNT ADAPTOR RING (Optional - use for C-Mount lens only) MOUNTING HOLE(1/4"-20 UNC) BACK FOCUS CONTR.
4. CAMERA COMPONENT DESCRIPTIONS • BACK ① . MENU SET BUTTON MENU NA VIGATION BUTT ONS ② . UP BUTTON ③ . DOWN BUTTON ④ . LEFT BUTTON ⑤ . RIGHT BUTTON ⑥ . POWER LED ⑦ . SDI OUT BNC ⑧ . VIDEO OUT BNC ⑨ . MIC IN JACK(Future Feature) ⑩ .
10 5. INST ALLA TION • LENS CONNECTION Mega Pixel Lenses are sold separately . Lenses such as a DC auto iris lens, CS-Mount lens and C-Mount lens can be used ( adapter included for C-Mount Lens).
11 5. INST ALLA TION Installation of C-Mount Lens Installation of CS-Mount Lens C to CS-MOUNT ADAPTOR RING Lens Lens.
12 5. INST ALLA TION • CONNECTION DC12V REGULA TED POWER SUPPL Y BNC FEMALE VIDEO TO VIDEO IN TO HD SDI IN HDCCTV DVR OR OTHER HDCCTV SIGNAL EQUIPMENT HANDHELD.
13 6. DIMENSIONS Unit: mm(inch) 145(5.71) / (C-Mount) 138.55(5.45) / (CS-Mount) AUTO IRIS JACK MOUNTING HOLE C-MOUNT ADAPTOR RING (Optional use for C-Mount Lenses only) 72.
7. SPECIFICA TION Image Device 1/3” SONY Mega-Pixel Color Progressive CMOS Effective Pixels 1329 (H) x 1049 (V) 30fps Unit cell size 3.63um (H) x 3.63um (V) Video output mode HDCCTV : 720p 30, 720p 60, 720p 25, 720p 50 TV Out : NTSC / P AL selectable H.
8. DIGIT AL INPUT/OUTPUT • Digital Input Port (Future Feature, Use for CDS Mode Only) External CDS is only active when day and night mode is set to EXT Mode in the OSD. CDS : External device to control day and night status • Digital Output Port ( Future Feature) 15 CAMERA EXTERNAL DEVICE MicroController GPOUT PORT (3.
16 9. OSD MANUAL • Menu structure - Main Menu - VIDEO OUT Menu SPECIAL VIDEO OUT LENS EXPOSURE WHITE BALANCE DA Y / NIGHT IMAGE VIDEO OUT SDI FORMA T TV OUT FORMA T NTSC / PAL 720p 30Hz / 720p 60Hz .
8 . OSD MANUAL - LENS Menu - EXPOSURE Menu 17 LENS LENS TYPE BRIGHTNESS 0 ~ 127 DC IRIS IRIS SPD 0 ~ 1 12 DC IRIS / MANUAL IRIS MANUAL EXPOSURE BRIGHTNESS SHUTTER MODE SHUT LEVEL(Shutter Level) 0~215 .
18 9. OSD MANUAL - WHITE BALANCE Menu - DAY / NIGHT Menu - IMAGE Menu WHITE BALANCE MODE R GAIN 0 ~ 255 MANUAL B GAIN 0 ~ 255 A TW / PUSH / MANUAL DA Y / NIGHT MODE DA Y LEVEL 0 ~ 127 AUTO / EXT NIGHT LEVEL 0 ~ 127 COLOR / AUTO / EXT / BW IMAGE SHARPNESS IMAGE FLIP DNR GAMMA OFF , H FLIP , V FLIP , H/V FLIP OFF , LOW, MID, HIGH OFF , 1.
19 9. OSD MANUAL - SPECIAL Menu SPECIAL SYSTEM INFO USER SET COMM/GPIO SET FOCUS MODE ON / OFF LANGUAGE SA VE USER SET LOAD USER SET CLEAR USER SET F ACTORY RESET CAMERA RESET RS485 Address GP IN Stat.
20 9. OSD MANUAL • ICONS - : V alue adjustment(use LEFT/RIGHT button). - : Select Sub Menu(use SET button). - : Execution command(use SET button). - : Return to previous menu. - : Menu OFF . - : Information. The [SETUP] menu will show up when you push the SET button.
21 9. OSD MANUAL • Video Out - SDI Format Select SDI output Formats – 720p 30Hz, 720p 60Hz, 720p 25Hz and 720p 50Hz. - TV Out Format Select NTSC / P AL. Note : NTSC or P AL Video Format can be selected by pressing the RIGHT Button even when the OSD Menu is turned off - ESC Back to the previous.
22 9. OSD MANUAL • EXPOSURE - BRIGHTNESS Same as the BRIGHTNESS value in LENS Menu. Using Left / Right button, adjust Brightness value. - SHUTTER Using Set button, go to the SHUTTER sub menu. - AGC MAX Using Left / Right button, adjust AGC Max value.
23 9. OSD MANUAL • WHITE BALANCE - MODE Using Left / Right button, select White balance modes – A TW, PUSH and MANUAL. A TW Auto T race White Balance mode PUSH White Balance Push Lock mode (Auto White Balance Control & Lock) MANUAL Manual White Balance mode - R GAIN This menu appears on screen when MANUAL is selected.
24 9. OSD MANUAL • Day / Night - MODE Using Left / Right button, select TDN(T rue Day & Night) modes – AUTO, EXT , COLOR, and BW. AUTO Controlled by AGC level in the processor . (AGC T ype) EXT Controlled by signal from CDS sensor . (CDS T ype) COLOR Fixed Day State.
25 9. OSD MANUAL • IMAGE - SHARPNESS: Using Left / Right button, adjust sharpness value. - IMAGE FLIP: Using Left / Right button, select Flip modes – OFF , H FLIP , V FLIP and H/V FLIP . - DNR: Using Left / Right button, select Digital Noise Reduction Modes - OFF , LOW, MID, HIGH.
26 9. OSD MANUAL - USER SET Using Set button, display [USER SET] sub menu. - COMM/GPIO SET Using Set button, display [COMM/GPIO SET] sub menu. - FOCUS MODE In focus mode, the iris becomes fully open, electronic shutter controls the light level, and the TV out screen zooms into the center in order to make focusing easier .
27 9. OSD MANUAL • COMM/GPIO SET (Sub Menu) - RS485 Address Future Feature. - GP IN Status ( CDS Mode Only Digital input Future Feature) If the OSD is set to the EXT mode in the [DA Y/NIGHT] menu, this port is used to connect to a photo-sensor . - GP OUT Control (Future Feature) .
28 EverFocus Electronics Corp. Corporate Headquarters: 12F , No.79 Sec. 1 Shin-T ai Wu Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .
Een belangrijk punt na aankoop van elk apparaat EverFocus EQH5000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EverFocus EQH5000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EverFocus EQH5000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EverFocus EQH5000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EverFocus EQH5000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EverFocus EQH5000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EverFocus EQH5000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EverFocus EQH5000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
