Gebruiksaanwijzing /service van het product IP 99 Series van de fabrikant EverFocus
Ga naar pagina of 32
IP 99 Series EVS1 10 1CH V ideo Server EIP220 Network Camera User ’ s Manual Copyright © EverFocu s Electronics Corp, V ersion Release: Dec. 2008.
IP99 series 1 Product Name: IP99 EverFocus Network Cameras Model Number(s): EVS1 10, EIP220 FCC Notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the lim its for a Class A digital device, pursuant to part 15 of the FCC Rules.
IP99 series 2 About this document All the safety and operating instructions should be read and followed before the unit is operated. This m anual should be retained for future reference. The information in this m anual was current wh en published. The m anufacturer reserves the right to revise and impr ove its products.
IP99 series 3 power source ratings. Do not use the app liance in an extreme environm ent where high temperature or high humidity exists. Use the applian ce at temperature within -10 ℃ ~ 50 ℃ / 14 ~ 1 ℉ 22 and a humidity below 90%. The input power source ℉ for this appliance is 12VDC.
IP99 series 4 For example: (This web site may change without notices.) http://www .microsoft.com/downloads.
IP99 series 5 T ABLE OF CONTENTS 1. ST AR TING THE CAMERA O R VIDEO SER VER ............................................. 7 1.1 I NST ALL IP99 SEARCHER IN PC ............................................................................. 7 1.2 A SSIGN N EW IP ADDRESS ( OPTIONAL ) .
IP99 series 6 3.12 PTZ SETTING ..................................................................................................... 26 3.13 A DMINIS TRA TOR .............................................................................................
IP99 series 7 1. S tarting the camera or video server 1.1 Install IP99 sear cher in PC Though you can simply enter 192.168.1.99 in IP addre ss bar to access camera when you connect to only one IP99 device.( Default IP address is: 192.168.1.99 Port is: 80) .
IP99 series 8 Note: Please consult your ne twork administrator f or avoi ding IP address conflict Diagram 1.2 Assign new IP address 1.3 Access ing the camera Double click selected camera in IP99 searcher or Enter IP address in IP address bar , as shown in diagram 1.
IP99 series 9 In login window , enter user name and password, （ default user name is admin, p a s s w o r d i s 11111111 ） . Click “ Confirm ＂ button to enter web window , as shown in diagram 1.
IP99 series 10 2.1 Add more videos If you wish to add one video display in the same web page, click “Add New” button, as shown in diagram 2.2: Diagram 2.2 Add video display 2.2 Change video resour ce Y ou can change video resource and simultaneously view multiplies cameras and encoders at same time.
IP99 series 11 2.3. Edit and Change Display Layout 2.3.1 Edit layout If you wish to add more vi deo displays, please click , then interface changes to ， you can freely set the layout of vide o display in this window . Enter the number of channels you want for each row .
IP99 series 12 Diagram 2.5 Layout selection 2.4 Zoom in/zoom out 2.4.1 Integer z oom in/zoom out Click buttons at top right side of the page to zoom in or zoom out the entire screen.
IP99 series 13 Diagram 2.6 Record 2.4.2 S top recording Method 1: Click on button located at top right corn er of the image, it will stop recording immediately , button changes to . Method 2 ： Double click on the green area of , it returns to original color meaning th at recording is stopped.
IP99 series 14 Click “ Search NVR ＂ button to search the NVR device used for archiv ing recording files. If you do not have NVR devi ce, please ignore this selection. Open the file to be played, click “ Play ＂ to play recorded video. ¾ Click fast forward button , to adjust playback speed.
IP99 series 15 Note 2 ： PTZ control can also be preformed by using PC’ s keyboard, please refer to section 5 of 2.4.7 for more details. Note3: PTZ control is functioning only if PTZ Function is set On in PTZ Setting, please refer to section 3.12. 2.
IP99 series 16 Diagram 2.10 Display size 2 ） Change source: Click “ Change source ＂ to f ill out information for the IP camera to be controlled, as shown in diagram 2.
IP99 series 17 4 ） Sound ON ： used to enable/disable sound transmission. 5 ） PTZ(for V ideo Server only) ： Click “ PTZ ＂ option which allows you to check keyboard keys of PC used to control speed dome, as shown in diagram 2.13: Diagram 2.13 PTZ contraol keys and functions 6 ） File .
IP99 series 18 Diagram 3.1 status information 3.2 V ideo/audio setting Select 2. V ideo & Audio from the drop-down menu at top right corner , as shown in diagram 3.2: Diagram 3.2 V ideo & Audio settings Enable settings for video stream, snapshot, OSD, Record and Audio.
IP99 series 19 2 ） Resolution: Set record resolution D1: 720x480 (NTSC) / 720x576 (P AL) Half D1: 720x240 (NTSC) / 720x288 (P AL) CIF: 352x240 (NTSC) / 352x288 (P AL) QCIF: 176x120 (NTSC) / 176x144 (P AL) 3 ） Limit frame rate to: S et frame rate according o resolution.
IP99 series 20 Diagram 3.3 （ b ） Device setting Diagram 3.3 （ b ） shows the functions of IP camera, it is for IP camera NOT for V ideo Server . It has some additional functions compared to other cam eras, as shown in diagram 3.3 (c): Diagram 3.
IP99 series 21 selected area, click “Remove regi on”. Please refer to diagram 3.4: Diagram 3.4 Alarm event 1 ） Motion detection event: No ev ent, send JPEG file by e-mail or upload to FTP . Note: W hen sending JPEG by e-mail or upload to FTP , file will be sent to the assigned e-mail adress.
IP99 series 22 3.5 Networki ng Set camera’ s IP address, DNS setting, HTTP port information, as shown in diagram 3.6: Diagaram 3.6 Networking DHCP will automatically get the IP addr ess. If you are not using DHCP , you can manually assign IP address and port.
IP99 series 23 3.6 W ireless LAN Assignment will be made accord ing to local wireless router , as shown in diagram 3.7: Diagram 3.7 W i reless settings 3.7 PPPOE setting Select whether to enable PPPoE function. If PPPoE function is enabled, please enter user name and password: Diagram 3.
IP99 series 24 When network is connected, it will show IP address, default router and DNS server after connection in status section. Enable “ Email notif ication when IP is changed ＂ function, so when the system re-connects to network, it will automatically notif y the IP address to user by e-mail.
IP99 series 25 Diagram 3.10 SMTP setting Enter user name and password of login mail server . Once SMTP is set, it can be used when snapshot, alarm and PPPoE are enabled. 3.10 FTP setting Select “ FTP server setting ＂ page, as shown in diagram 3.1 1 ： Diagram 3.
IP99 series 26 Set FTP server , user name, password, FTP comm and port and path & file name. User can upload recorded video and event file to FTP server . 3.1 1 Date & Time setting Set camera’ s current date, time and time zone, as shown in diagram 3.
IP99 series 27 Diagram 3.13 PTZ settings Since IP address is the only fixed one, ther efore PTZ address is se t as “1”. Protocols are Pelco-D and Pelco-P wh ich are in common use. Note: When using Everfocus speed dome, us er only needs to set the protocol as AUTO in order to control the speed dom e.
IP99 series 28 Diagram 3.14 Management 3.14 Change password Change user ’ s login password, as shown in diagram 3.15: Diagram 3.15 change password 3.15 Special setting Set compression, set camera type and transf orm to A VI for mat, as shown in diagram 3.
IP99 series 29 Diagram 3.16 Special setting Default compression rate is 8. The lowest compression rate is 5 for clearer image. compression 15 is the highest rate for smoother im age. 3.16 Maintenance Maintenance and system upgrade, as shown in diagram 3.
IP99 series 30 4. Fr equently Asked Questions 4.1 I have problem r ecording and playback on W indows V ista. Answer: Y ou need to turn off User Account Control (UAC) 1. Open Control Panel. 2. Under User Account and Family settings click on the "Add or remove user account".
IP99 series 31 EverFocus Electronics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chi, T aipei, T aiwan TEL: 886-2-26982334 F AX: 886-2-26982380 www .everfocus.com.tw USA Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .
Een belangrijk punt na aankoop van elk apparaat EverFocus IP 99 Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EverFocus IP 99 Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EverFocus IP 99 Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EverFocus IP 99 Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EverFocus IP 99 Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EverFocus IP 99 Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EverFocus IP 99 Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EverFocus IP 99 Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
