Gebruiksaanwijzing /service van het product 68-388-01 van de fabrikant Extron electronic
Ga naar pagina of 40
System 5 cr cr cr cr cr System Switcher 68-388-01 Printed in the USA.
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.
Setup Mode procedures Connections Q UICK S TART FOR S YSTEM 5 cr cr cr cr cr S WITCHER Enter Setup Mode, and then continue to procedure a, b, or c. Use Setup Mode for each of the following procedures. To enter Setup Mode, press and hold all 3 Display buttons (Power/Mute/Mode) on the front panel for 2 seconds.
Contents Extron • System 5 cr Switcher • User ’ s Manual Chapter One • Introduction to System 5 cr cr cr cr cr What is a System 5cr Switcher? ................................................................................................. 1-1 Controlling the System .
1 Chapter One Introduction to System 5 cr cr cr cr cr What is the System 5 cr ? Control of the Entire A/V System Infrared Learning Features & Options Specifications System 5 cr Switcher User ’ s.
Introduction and Features • Chapter 1 Extron • System 5 cr Switcher • User ’ s Manual What is a System 5 cr cr cr cr cr Switcher? Throughout this manual, the terms System 5 and System 5 cr are both used to refer to the same product. The System 5 provides central control for small audio/video installations.
Chapter 1 • Introduction and Features Extron • System 5 cr Switcher • User ’ s Manual Infrared Learning for System Control The IR receiver window on the front panel also serves as a learning port to add IR signals from other sources to the System 5 panel functions.
Introduction and Features • Chapter 1 Extron • System 5 cr Switcher • User ’ s Manual Options and Accessories The System 5 is more than just a system switcher. Standard and optional features make it the control center for a small A/V system by adding control of other things in the room as part of the system design.
Chapter 1 • Introduction and Features Extron • System 5 cr Switcher • User ’ s Manual 1-4 Specifications Video input Number/type _ 3 RGBHV/RGBS/RGsB computer video _ 2 S-video or composite vid.
Introduction and Features • Chapter 1 Extron • System 5 cr Switcher • User ’ s Manual 1-5 Audio throughput Gain _ -78dB to +40dB Frequency response _ ±0.
2 Chapter T w o Rear Panel Connections Mounting – T ab le or Rac k Input Connections Output Connections Connecting Accessories System 5 cr Switcher User ’ s Manual.
Making Connections • Chapter 2 Extron • System 5 cr Switcher • User ’ s Manual Installation in a Rack, on a W all or Under a T able The System 5 cr comes with two sets of mounting brackets. One set is for mounting under a table or on a wall and the second set is for rack mounting.
Chapter 2 • Making Connections Extron • System 5 cr Switcher • User’s Manual Figure 2-2a. The left side of the rear panel has four of the five inputs. 6 PC1 input is on the Front Panel and accepts laptop video through a VGA connector as well as 2-channel audio through a 3.
Making Connections • Chapter 2 Extron • System 5 cr Switcher • User ’ s Manual _______ Although all three outputs may be connected at the same time, only one can be active at one time, as determined by the input format. In a typical installation, an LCD projector may have inputs for all three formats.
Chapter 2 • Making Connections Extron • System 5 cr Switcher • User ’ s Manual 2-4 Audio Preamp Out Connection Connect balanced or unbalanced, 2-channel audio to the Preamp Out connector marked L (Left) and R (Right), using a captive screw connector.
Making Connections • Chapter 2 Extron • System 5 cr Switcher • User ’ s Manual 2-5 3.5 mm, 5-pole captive screw connectors are used for the audio inputs and one output, as well as for accessories.
3 Chapter Three Using the System 5 cr cr cr cr cr Front Panel Controls & Indicators Configuration: Audio Preset, VID Formats & IR Learning System 5 cr Switcher User ’ s Manual.
Operating the System 5cr • Chapter 3 Extron • System 5 cr Switcher • User ’ s Manual Using the System 5 cr cr cr cr cr ________ In addition to the basic function of each of the panel buttons described here, there are also setup procedures that use many of the same buttons and controls.
Chapter 3 • Operating the System 5cr Extron • System 5 cr Switcher • User ’ s Manual ________ As stated earlier, each input button can be programmed to “ learn ” an associated IR command.
Operating the System 5cr • Chapter 3 Extron • System 5 cr Switcher • User ’ s Manual Configuration Setup from the Front Panel For the System 5 switcher to control other equipment in the A/V system, it must be configured from the front panel, or through an RS-232 device.
Chapter 3 • Operating the System 5cr Extron • System 5 cr Switcher • User ’ s Manual Select format for VID1 and/or VID2. To set these two inputs for either Composite or S-video, in Config Mode, do the following: 1b. Press and hold the Room button until finished with this operation.
Operating the System 5cr • Chapter 3 Extron • System 5 cr Switcher • User ’ s Manual 3-5 Remote Operation ________ See inset (top, right) to install batteries. The System 5 includes one infrared remote control (IR 40) and can have one or two optional remote control panels (SCP 100).
4 Chapter Four Windo ws® Contr ol Software Installing the Windows Control Softw are Program Help Program Operation Downloading IR Projector Drivers System 5 cr Switcher User’s Manual.
Windows® Control Software • Chapter 4 Extron • System 5 cr Switcher • User’s Manual RS-232 B H/HV V VID PREAMP OUT L L R R L R AUX 1 AUX 2 AMPLIFIED OUT DISPLAY PWR SENSOR RELAY COMM.
Chapter 4 • Windows ® Control Software Extron • System 5 cr Switcher • User ’ s Manual This is the help screen that appears when you click the Configure Unit link.
Windows ® Control Software • Chapter 4 Extron • System 5 cr Switcher • User ’ s Manual Power Up/Down Delay times 1 Many projectors (LCD, DLP, etc.) have a warm-up and cool-down cycle. During these times, the projector may not accept commands.
Chapter 4 • Windows ® Control Software Extron • System 5 cr Switcher • User ’ s Manual RGB Delay Times 4 The RGB delay time switches the video off before switching the sync off. It then switches the sync for the new input before switching the video on.
Windows ® Control Software • Chapter 4 Extron • System 5 cr Switcher • User ’ s Manual 4-5 Loading Projector Drivers A sub-folder under the System 5 folder is used to store the user ’ s library of projector drivers.
A Appendix A Programming the System 5 cr cr cr cr cr Remote Control Port (RS-232) Host-to-Switcher Instructions Command/Response T able System 5 cr Switcher User ’ s Manual.
RS-232 Programming • Appendix A Extron • System 5 cr Switcher • User ’ s Manual Female Connector Male Connector 5 1 6 9 9 6 5 1 Remote Control Port (RS-232) Figure A-1 shows the RS-232 port connector.
Appendix A • RS-232 Programming Extron • System 5 cr Switcher • User ’ s Manual Simple Instruction Set – Command codes Extron ’ s Simple Instruction Set (SIS) minimizes the code required. Initial power up Unit response ©COPYRIGHT 1999, EXTRON ELECTRONICS System 5cr, V1.
RS-232 Programming • Appendix A Extron • System 5 cr Switcher • User ’ s Manual Advanced Instructions – Reserved for Windows program IR Block ASCII Hex Unit response Read (Upload) n/a 80 83 .
B Installing System 5 cr cr cr cr cr Options Projector Power Sensor Infrared Broadcaster SCP 100 Remote Pads Glossary of T erms Index System 5 cr Switcher User ’ s Manual.
Reference • Appendix B Extron • System 5 cr Switcher • User ’ s Manual System 5 cr cr cr cr cr Options Figure B-1 illustrates the options and accessories that operate with the System 5. The standard accessories installation is covered in Chapter 2 and each option has its own User ’ s Guide.
Appendix B • Reference Extron • System 5 cr Switcher • User ’ s Manual T o IR Broadcaster T o projector remote jack Notes: The IR Broadcaster requires a 3-wire cable to connect: +12 V from tip to contact E, signal from Ring to contact C and Ground from Sleeve to either contact B or D.
Reference • Appendix B Extron • System 5 cr Switcher • User ’ s Manual Glossary of terms Following is a list of terms taken from Extron ’ s Glossary.
Appendix B • Reference Extron • System 5 cr Switcher • User ’ s Manual B-4 the associated (learned) command is then transmitted through an IR emitter or broadcaster to the projector, where it is executed. For example, if input #3 is S-video, selecting that input also sends a signal to the projector to switch to S-video mode.
Reference • Appendix B Extron • System 5 cr Switcher • User ’ s Manual Index A Attenuation quick start page config setup ............. 3-4 defined .................... B-3 attenuation operation ... 3-2 host commands ....... A-2 audio out specifications .
FCC Class A Notice Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
EXTR ON ELECTRONICS/R GB SYSTEMS, INC. 1230 South Lewis Str eet, Anaheim, CA 92805 800.633.9876 714.491.1500 F AX 714.491.1517 U.S.A. EXTR ON ELECTRONICS, EUR OPE Beeldschermweg 6C, 3821 AH Amersfoort +31.33.453.4040 F AX +31.33.453.4050 The Netherlands EXTR ON ELECTRONICS, ASIA 41B Kreta Ayer Road, S ingapore 089003 +65.
Een belangrijk punt na aankoop van elk apparaat Extron electronic 68-388-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Extron electronic 68-388-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Extron electronic 68-388-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Extron electronic 68-388-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Extron electronic 68-388-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Extron electronic 68-388-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Extron electronic 68-388-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Extron electronic 68-388-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.